Renovation and up-gradation of toilet at ground floor and providing false ceiling at DAE Canteen under OYC Maintenance unit, Mumbai-01

Amount

PART A : CIVIL WORKS

PART B : Electrical light Fittings

PART-C - REBATED ITEMS

Description of Work / Item(s)

Amount

PART A : CIVIL WORKS

Demolishing brick /stone masonry in cement mortar and plaster at all floors & levels including scaffolding, stacking of serviceable materials & collecting unserviceable material at identified place & disposing of the same from the premises etc. Outside /premises of /office colony etc. complete all as per specification & as directed by the Engineer-in-Charge.

Demolishing Plain cement concrete / RCC/ tiles by chiselling in cement mortar and plaster at all floors & levels including scaffolding, stacking of serviceable materials & collecting unserviceable material at identified place & disposing of the same from the premises etc. Outside /premises of /office colony etc. complete all as per specification & as directed by the Engineer-in-Charge.

Half brick masonry using well band locally available bricks of approved quality in cement mortar 1:4 at all floors and levels including RCC 1:2:4, 115mm wide & 80mm thick stiffeners at every one metre height with 2 Nos. of 6 mm dia M.S. rods including form work, scaffolding, raking out joints, curing, etc. complete all as per specifications & as directed by the Engineer-in-Charge.

Removing carefully the existing flush door shutters and refixing the same to its position after laying new tiles on flooring including cutting the shutters at bottom portion as per site condition , lipping the cut exposed surface with teak wood lipping including nails, screws, adhesive etc. complete all as directed by the Engineer in charge.

Plain cement concrete 1:2:4 using graded stone aggregate of 20mm max. size at all levels and locations including mixing, laying, consolidation, finishing, curing, etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Providing and laying at all floors and levels Vitrified tiles of size 600mmx600mm (approx.) similar to satin matt finish of M/S H&R JHONSON(INDIA)Ltd or equivalent approved make of approved pattern, colour & make & min thickness of 8.5 mm or as per manufacture's specifications and fixed over 12 mm thick backing coat cement mortar 1:3 in respect of skirting , close jointed and grouted white /colour cement slurry with pigments to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings / cut out where necessary, including wastage for odd shape of room and final cleaning of surfaces as required, curing etc. complete all as per drawings and manufacture's specification & directed by the EIC. Note: In case of non-availability as per item, other makes which can be considered are 'Asian', 'Oracle Granito Ltd.', 'Orient'.

a) In flooring with tiles of approx. size 600 mm x 600 mm.

Providing & laying at all floors & levels first quality matt finish ceramic tiles of minimum thickness as specified by the manufacturer of M/S. H&R JHONSON (INDIA) Ltd. or equivalent approved make of approved colours, shade and texture in flooring / dado / skirting as per approved pattern. including cost of all materials, including of cutting the tiles to required shape, wastage, pointing the joints with white cement mixed with matching pigments to match the colour of the tiles, finished to line, level, slope & plumb, final cleaning of surface as required, curing, making necessary opening cut-outs etc. and including removing existing flooring / dado and disposing of debris outside colony complete all as per specifications and as directed by the Engineer-in-Charge. Note: In case of non-availability as per item, other makes which can be considered are 'Asian', 'Oracle Granito Ltd.', 'Orient'.

a) In flooring with tiles of approx. size 300 mm x 300 mm.

b) In Dado / skirting with Glossy, Jamaia, beige germ free tiles of size 600 X 300 mm of M/s H & R Jhonson (I) ltd. laid over 12 mm thick backing coat cement plaster in CM 1:3, jointed with cement slurry & grouted with pigment of matching shad & finishing the top of skirting etc. complete, including dismantling the existing dado/skirting tile and backing cement mortar disposal of debris outside colony etc. complete.

Providing & laying machine cut machine polished kotah stones strips of size 100 mm wide for disabled friendly ramp topping including necessary cement mortar for backing bedding gover 20 mm lapping jointed and grouted with matching cement slurry and finished to line, slope, level, plumb, curing etc., as required including cutting of stone slabs, wastage, making cut outs wherever required etc. all as per specifications and as directed by Engineer in charge. Note: Top exposed surface on plan & exposed finished face shall be measured for payment in sqm.

Providing & fixing laying/fixing in position 20 mm thick machine polished granite slabs of Jet black colour and quality including machine / hand cut, polishing, buffing the edges all in line, level, (Curvature corners if required) in cement mortar 1:3, 20mm thick, with best workmanship, finishing, curing, complete in platforms, shelves, wash basin, cills, jambs, facia including dismantling the existing marble platform etc. complete all as per directions of the Engineer-in-Charge. Note: Exposed surface on Elevation & exposed vertical finished face shall be measured for payment in sqm. Overlapping & edges etc. shall not be measured.

Providing and fixing in position at all floors, levels / heights 18 mm thick mirror polished natural stones slab for door frame in two overlapping layers one piece full length / height of approved shade, finished sizes as directed including machine cut / hand cut, final cleaning, moulding and polishing of exposed edges, in line, level, plumb and fixing the stone with cm 1:3, 20mm backing & overlapping of 20 mm shall be fixed with Araldite adhesive, with best workmanship, finishing, curing, including removing existing door frame, shutter & fittings etc. and depositing the same at dept. store etc. complete all as per specifications, drawings & as directed by the Engineer-in-Charge

a) Composite marble

b) marble as per existing pattern & design

Supplying & fixing 25 mm thick PVC integral free foam sheet in form of flush finish door shutter, manufactured by M/s. Jain Irrigation Systems Ltd. (Ex-cel sheet) or other equivalent approved make of white colour, solid section, extruded rigid, light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides including providing recessions for hinges and providing & fixing 3 no’s 100 mm heavy duty S.S. hinges and 2 Nos. 150 mm heavy duty aluminium baby latches, 2 nos. of 100 mm Al. Bow handles with back plate and including providing a vision panel opening of size 300 mm X 200 mm including providing and fixing PVC moulded louvers on both faces in the opening of vision panel with ss screws, all edges to be smooth finish with mixture of PVC powder & solvent etc. complete all as per specification and as directed by the EIC. Note: - 1) The entire door shall be joint less shutter. 2) The sizes shall be approximately 650 mm x 2000mm, however exact dimensions shall be measured at site before manufacturing.

Supplying, fabricating and fixing in position at all floors factory made aluminium sliding / top hung / fixed / adjustable louvered / window / ventilator / partition with rebate joints of specified size made of integrated bronzed anodised matt finished ( 15 Micron thick) aluminium section (extruded) including for making exhaust fan frame work, handle of specified size, pivot, floor hinges in aluminium door, etc. of approved manufacturers for following types with extruded sections of Jindol / Indol / Aluminax or other approved equivalent make of approved sections with size and weights as directed for partition / frames / shutters including wastage if any, confirming to relevant IS Specifications with all approved bronzed anodised aluminium fittings and accessories, latching fixture 2/3 rollers with ball bearing of superior quality including providing and fixing aluminium channel beading / glazing clips fixed with necessary bronzed anodised screws, grouting the gaps with sealant and including dismantling existing window / partition / wooden door parathion / glass partition etc and depositing the same to depth. Store etc. all completed as per specification and all directed by the EIC.

Providing and fixing following thickness of clear float/ frosted / Bajara sheet glass of M/S Triveni/ shree vallabh/ IAG/Modi guard/ Saint Gobin or other approved equivalent manufacture and fixing with Aluminium frame work (door/ window) including fixing aluminium channel beading and providing and fixing 2 way EDPM gasketing to ensure water and air tightness and neoprene cushions/ gasket accommodated in grooves, necessary bronze anodised screws etc., all complete generally as per drawings specifications and as directed by Engineer in Charge

a) 5 mm thick clear float / Bajra Glass

b) 4 mm thick Bajra sheet glass for louvers.

Providing, Fixing & assembling/ fixing at site Table top/ cupboard /shelves /wall cabinets etc. using following material of approved quality machine pressed phenol formal dehyde bonded marine plywood of IS 710 latest revision, and both face lamination with 1 mm thick lamination on top /exposed surface and 0.8 mm thick laminate on bottom / inner surface of approved shade and make on both faces , all edges covering with 12 mm thick teak wood Patti or other approved equivalent , using approved glue for pressing, approved quality PVC wire manager for taking out all wiring etc. and carefully fixing to the vertical partition including all materials adhesives, S S screws labours, materials, wastages etc. all as per approved drawing and as directed by EIC. Note:- No separate measured for payment will be made for decorative laminate.

a) 19mm thick marine ply. With both side laminate (1.00 mm thick laminate on top /exposed surface and 0.8 mm thick laminate on bottom / inner surface)

b) 12mm thick marine ply. With both side laminate (1.00 mm thick laminate on top /exposed surface and 0.8 mm thick laminate on bottom / inner surface)

Repainting of old painted surfaces with two coats of acrylic emulsion paint of approved make & shade over two coats of approved primer (alkali resistant) consist of thoroughly scrapping oil bound distemper /acrylic emulsion / white wash surface, applying a coat of approved cement primer, filling up the cracks with approved crack filling compound , applying approved stucco putty to entire surface to fill up crevices, mild depression etc. thoroughly scrapping the surface, applying 2nd coat of approved cement primer carrying out full stucco putty work , apply two coats of acrylic emulsion paint including necessary covering material and removal of splashing & droppings from floors, walls including scaffolding, ladder as required & disposing of debris outside colony etc. complete all as directed by the Engineer-in-Charge.

Providing, fabricating and fixing S. S. 304 railing of approved pattern & design including welding, jointing grinding with smooth finish etc. complete all as per specifications and as directed by EIC.

Providing chemical based water proofing of Indofil Chemical new coat of M/s Pidililte, Indofil chemicals UV resistant of approved colour over terrace and parapet as per the following procedure: Chemical properties: PH Value : 9 ( min.) Sp. Gravity : 1.035 Active solid content : 47%/mass (min) Viscosity : 17 sec (by Ford cup B-4 method) UV Resistant : Continuous 200 hr (min) a) Cleaning the terrace completely with high pressure water jet pump (100 Kg./sq.cm.) cleaning to remove all dirt with wire metal brush. b) Applying a coat of Indofil MC-76 mixed with clean water in 1:4 ratio i.e., one part of MC-76 and four parts of clean water over the entire area to be treated including filling of cracks, if any with CM-1:3 with waterproofing compound. c) Applying a coat of cement bond coat with MC-76 mixed with cement in 1:1 ratio i.e., 1 part of MC-76 and 1 part of cement. d) Providing and spreading of polycon based fibrous waterproofing net for entire area of terrace including lapping as per manufacturer's specifications immediately after applying bond coat and curing. e) Applying one more bond coat with MC-76 mixed with cement in 1:1 ratio i.e., 1 part of MC-76 and 1 part of cement over the polycon based net. f) Applying two coats of flex top coats with indofil flex coat mixed with 85 parts indofil flex coat and 15 parts clean water.

Providing & fixing on Exposed or concealed surfaces the following dia Chlorinated Polyvinyl Chloride (C-PVC) pipe of specified class of M/s. SUREME / M/s. PRINCE / M/s. Jain Irrigation or other approved equivalent consisting following items of work:- i) Supplying & fixing C-PVC pipes, including necessary all fittings conforming to IS 15778 ii) Laying and fixing the pipe and specials on exposed surfaces to correct line, level and plumb for water supply line, overflow and vent using M.S. nails/screws, rawl plugs, wooden gutties and branded clamps of Supreme/Prince make to the pipeline as per the site requirement. iii) Testing the pipe line to a hydraulic pressure as per manufacturers catalogue for leak proof joint or as per relevant code iv) Making leak proof threaded / solvent joints. Including cutting the pipe, Joint preparation, cleaning, marking, application of solvent, assembling, curing etc. and the cost of jointing cement solvent materials. v) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. Proof joints. vi) Providing and fixing C-PVC jointable / threaded fittings such as Union, Nipples, Bends, Elbows, Tees, Reducers, End caps, Couplers, Adaptors, Saddles, Plugs, Tank connectors, Expansion loops, Bypass bends, etc. vii) including removing existing GI pipe line with fittings and specials etc. Note:- All brass threaded elbows and fittings shall be with additional support type of M/s. Prime, Supreme or other equivalent approved by EIC including necessary fixing arrangement such as screws, plug etc. complete. SDR 11 Pipes and Fittings (Mode of measurement: - The measurement shall per Unit RM length of pipe line laid or fixed. The measurement shall be taken along with the centre line of pipe. No measurement shall be recorded separately for fittings etc.)

a) 15 mm n.b

b) 20 mm n.b

C) 25 mm n.b.

d) 50 mm n.b

S. & f. following size type-B uPVC UV-Stabilised soil / waste quality pipes and fittings for soil, waste, vent, antisyphonage pipe. i) Removing the existing damaged cast iron pipelines along with fittings of various dia ranging from 50mm to 150mm dia without damaging the adjoining structure and handing over the pipes to dept. stores/ directed place. ii) Providing and fixing uPVC UV-Stabilised Soil / waste pipe of type-B conforming to IS:13592 with fittings as per DIN 19531/DIN 19534 and conforming to IS:14735 laid in floor & on Exposed faces of wall of Supreme make or equivalent approved make. iii) Fixing the pipeline vertically by Metal clamps with rubber seal of Supreme make Cat. No. SWRMCR 1 to 6. iv) Providing and fixing uPVC cowl at the top of soil, waste water & vent pipe line. v) Laying the pipe below floor/ground to proper slope and gradient for making connections of soil pipe line with inspection chamber or Manhole, waste water connection with Gully trap Chamber including the cost of cement mortar, cement concrete, water proofing compound etc. vi) Jointing the pipe with Solvent Cement & Rubber ring gasket (Rubber ring conforms to IS 5382) with making holes in walls / floor grooving and redoing the same and brick support etc. Giving water-tightness test for the pipes laid as per codal provisions. Providing Ring Joint pipes at verticals and solvent cement jointed pipes at concealed locations. vii) Necessary cutting to the required length including short pieces, fittings with & without door, assorted fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, WC connectors, offsets etc. viii) Dewatering the pit / trench if necessary, till completion of work. ix) Painting with two coats of heavily pigmented, exterior water based latex paint, scaffolding if necessary

a) 50 mm dia.

b) 75 mm dia.

C) 100 mm dia.

Providing and fixing large flat back approved coloured Urinal of size 590 mm X 375 mm X 390 mm model no. 60002 of M/s Hind ware make or other approved equivalent ISI marked. Fixed at required location on various floors & locations in building having ground + 4 upper floor, supported on suitable wall brackets with 32 mm n. b. heavy quality dripless Kingston make C. P. brass Bootle trap with extension piece and wall flange, suitable heavy quality C. P. brass dome shaped waste couplings including removal of old urinal wherever provided etc. including disposing of debris from site to BMC dumping ground etc. complete all as directed by the Engineer In Charge.

Providing and fixing in position and slope gradient approved coloured glazed half round channel for urinals, with suitable urinal channel of model no. 60004 of M/s Hind ware of other equivalent IS make including removing the exiting channel fixed necessary 20 mm thick cement mortar 1;3 bedding addition of waterproofing compound @ 2 % of weight of cement in bedding mortar disposing off all the debris from out of premises from various floors and locations of the building etc. complete all and as directed by the Engineer-In charge.

Providing and fixing C. P. brass Jaguar make heavy quality Push cock including cost of jointing, bending, Teflon tape, clamp, nail, white cement etc. Providing, laying, jointing & testing and painting heavy quality C. P. brass connector up-to 450 mm to 600 mm long including C. P. Brass nipple, 32 mm dia G. I. Nipple, 32 mm X 12 mm dia G. I. reducer elbow and other required for completion including removing old damaged flush tank and testing the line joints etc. complete all as directed by the Engineer-In-Charge.

Providing and fixing approved coloured EUROPEAN WATER CLOSET suite comprising: (a) Dismantling old European water closet and flush tank along with fittings and fixtures carefully without causing any damage and stacking the same at directed places. (b) Providing and fixing in position approved colour wash down patterned ISI mark European W. C. of model No 20001 of M/s Hind ware or equivalent make with ISI marked with P of S trap. (c) 15 mm n. b. heavy quality PVC inlet connection with brass unions connected at ends. (d) One number heavy quality fancy variety C. P. brass screw down stop cock of 15 mm n. b. size M/s Jaguar or equivalent approved confirming to IS 8931. (e) Providing and fixing in position approved colours (to match E. W. C.) with C. P. brass pillar hinges. confirming to IS 2548 (Part-I & II) (f) providing and fixing in position special colours (to match W. C.) 10 ltrs capacity plastic low level flushing cistern of champion make confirming to IS: 7231 complete with all internal fittings matching heavy quality PVC flush bend mounted on a pair synthetic enamel painted brackets with 32 mm n. b. flush pipe of appropriate length with all PVC specials. (g) Providing and fixing PVC seat cover matching to EWC including S. S. bracket etc. etc complete all as per direction of Engineer –In-Charge.

Fixing in position following type CP brass fittings including fixing wall flanges and fixing to concealed / exposed water supply pipe line with leak proof threaded joints using spun yarn, white zinc etc., testing the joints for leakage all as per specifications and as directed by EIC.

(a) C.P brass long body Bib tap 2 in 1 with wall flange, 'OPAL series' of ' JAQUAR' cat. No. 15041 including fixing Health faucet with 1.0 mt long flexible tube and wall hook( JAQUAR make Cat No. 573)

Providing and fixing approved coloured ORISSA PATTERN W.C. Suite comprising of: (a) Dismantling old Orissa pattern w. c. and flush tank along with fittings and fixtures carefully without causing any damage and stacking the same at directed place. (b) Providing and fixing in position approved colour Orissa pattern W. C. of size 580 mm X 440 mm and model No 20004 of M/s Hind ware make with ISI marked with P or S trap conforming to IS - 2556 (c) Providing and fixing in position approved colour (to match w. c. ) 10 letters capacity plastic low level flushing cistern of approved make conforming to IS - 7231 complete with all internal fittings matching heavy quality PVC flush bend mounted on a pair of synthetic enamel painted brackets with 32 mm n. b. flush pipe of appropriate length with all PVC specials etc. (d) One number PVC inlet connection with brass union set at ends. (e) One number heavy quality fancy variety C. P. brass screw down stop cock of 15 mm n. b. size M/s Jaguar or equivalent approved conforming to IS 8931. Etc. complete all as per direction by Engineer-In-Charge.

Providing & fixing approved quality wash basin of model No. 11002 of M/s Hind ware or other approved equivalent comprising of: (a) Dismantling old wash basin along with fittings and fixtures carefully without causing any damage and stacking the same at directed places. (b) providing and fixing in position approved coloured wash basin of model No. 11002 of M/s Hind ware make with ISI marked supported on suitable wall brackets painted with synthetic enamel paint. (c) One number PVC inlet connection with brass union set at ends. (d) One number heavy quality fancy variety C. P. brass screw down stop cock of 15 mm n. b. size M/s Jaguar or equivalent approved conforming to IS 8931. (e) One number 32 mm n. b. heavy quality c. p. brass waste coupling with overflow slit etc. complete all as per direction by Engineer-In-Charge.

i) 550 mm x 400 mm ( Approx. Size )

ii) Providing & fixing with pedestal type Wash basin of CADEO brand of JOHNSON make or equivalent model similar in all features from M/s. CERA, Hind ware, Parry ware etc., including coast of suitable waste coupling, bottle trap, wall brackets support of suitable size etc. including cost of removing the existing wash basin & disposing of debris outside colony etc. complete all as per directions of the Engineer-in-Charge.

Providing & fixing in position 15 mm diameter CP brass Pillar Cock conforming to IS/approved make fixing the cock in position with inlet connection using white zinc and spun yarn testing the joints for leakage etc. complete all as per specifications and as directed by EIC.

a) C.P brass Pillar Cock 15 mm size having auto closing system similar to 'Florentine' of ‘JAQUAR’ cat. No. 5011

Providing & fixing in position best quality bevelled edge plate Glass Mirror of various size of 6 mm thick with marine ply wood back 6 mm thick, CP brass cup screws and caps, washers etc. including providing & fixing rawl plug in wall, wooden packing behind the mirror if necessary, reinstating the damages to its original condition etc. and painting the ply with 2 coats of synthetic enamel paint over a coat of wood primer all complete as directed.by EIC.

Providing & fixing in position 550 x100mm wide & 6 mm thick Glass shelf with brass brackets of approved quality and fixing the Glass shelf on the wall to proper line & level using wall brackets with 40 mm long CP brass screws including making the 'wall to it's original condition and moulding of edges of glass etc. 'all as per specification & as directed by EIC.

Providing & fixing approved C.P. brass towel rods of size 600 mm x 20 mm with a pair of C.P. brass brackets, wall flanges etc. fixed to wall with C.P. brass screws, screwed on to rawl plugs etc. complete including the cost of removing the existing one etc. complete all as per specifications and as directed by the Engineer-in-Charge.

Providing and fixing in special position, coloured recessed type toilet paper holder of size 150 mm X 150 mm model no 40051 of M/s Hind ware or other equivalent make including making cavity in the wall and making good to the same etc. complete all as directed by the Engineer-In-charge.

Providing & fixing C.I. Nahani trap of self-cleansing design with 75 mm outlet having a minimum water seal of 50 mm with S.S. Grating on top including necessary 1:2:4 cement concrete for embedding the trap etc. complete conforming to I.S. 3989 including removing the existing one etc. complete. All as per specifications and as directed by the Engineer in charge.

Providing & fixing 125 mm dia S.S. grating for Nahani trap with necessary cement mortar 1:3 & matching cement and including removing existing grating, disposal of debris outside colony etc. complete all as per specifications and as directed by the Engineer in charge.

Transportation of debris / un-serviceable material from premises to MCGM dumping ground with mechanical means with loading the un-serviceable material and disposing off out of premises etc. complete all as directed by the Engineer-in-charge.

Providing and fixing 15 mm dia stainless steel L. P. Gas pipe line from VIP dinning at OYC to gas bank near AnushaktiBhavan including cutting the road, excavation including cutting, wielding, grinding, laying the ss pipe, clamping including 15 mm dia ball valve with adaptor 2 No’s, 4 inch dia pressure gage 1 no. including required ss union, coupling etc. including fabrication, painting, transportation, testing with approved gas agency etc. complete all as per specification, drawing and instructions of EIC.

Providing and fixing 12 mm thick Plaster of Paris sheet (POP Sheet) in false ceiling or equivalent including ceiling support of G. I. gird work 22 gauge at 600 mm c/c with 4 mm dia G. I. rods and 50 mm long dash fasteners, including cutting the sheet to required size making necessary opening of electrical fixtures A. C grills, fixing to correct line & level etc. including removing the existing false ceiling carefully from existing frame work and disposing off debris from out of the premises etc. complete all as per drawing and directed by the Engineering-in-charge. Note: 1) The rate shall include cost of additional members required if any for making cut out for fixing light fixtures, A. C. grills / diffusers etc. 2) The rate shall also include cost of trap door including necessary fixtures etc. 3) The work to be carried out by reputed company having sufficient work experience of similar jobs. 4) False ceiling shall be got done through the approved agency

Providing and fixing 15 mm dansified tabular edged eco-friendly light weight calcium silicate false ceiling tiles of approved texture spintone / cosmos / spectra or as available r equivalent of size 595 X 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections consisting of main "T" runners to be suspended from ceiling using G. I. slotted cleats of size 25 X 35 X 1.60 mm fixed to ceiling with 6 mm dia and 50 mm long dash fasteners 4 mm G. I. adjustable rods with galvanised level clips spaced at 600 mm centre to centre along main "T", bottom exposed with 24 mm of all T sections shall be pre-coated with polyester paint length of main 'T' runner suitably spaced at joints to get required length and of size 24 X 38 mm made out of 0.33 mm ( minimum) sheet, distributor length 600 mm and size 24 X 28 mm made of 0.33 mm thick ( minimum) sheet to be inter locked at middle of the 600 X 600 mm panel to from grid of size 600 X 600, resting on periphery walls / partition on a perimeter wall angle pre-coated sheet of size ( 22 X 22 X300 mm made of 0.45 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long drive all screws @ 230 mm interval and laying 15 mm thick densified edges calcium silicate tiles of approved texture ( Spintone / Cosmos / spectra, hexa ) in the grid including, wherever, required, cutting / making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. all sections i.e. "T", wall angle shall be pre-coated with polyester paint including removing the existing false ceiling and disposing of debris (un-serviceable material) out of the premises i. e. MCGM dumping ground, necessary scaffolding tools and plants, wastage, labour etc. all complete at all heights as per specification and as directed by the Engineer-in-charges. Note:- (1.) Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames / opening (cut outs) having area less than 0.30 Sqm. (2.) The calcium silicate ceiling tile shall have NRC. Value of 0.50 ( Minimum), light reflection > 85 % incombustible as per B. S. 476 part IV, 100 % humidity resistance and also having thermal conductivity < 0.043 w/m0 KC. (3.) The work to be carried out by reputed company having sufficient work experience of similar jobs.(4) No separate payment for trap door.

Providing and fixing brass inlay on flooring having size of 6mmX 6mm or 8mm X 8mm or approved size, design & patterned of fine finished on top including sharp cutting the tiles / marble / granite flooring / dado etc. and making grove on existing flooring / dado with sharp cutting with cutter machine as per approved design and patterned approved by competent authority including cost of following sizes of brass inlay /squire bars, labour, tools and plant, fixing adhesive material, required scaffolding, transportation, wastage etc. including taxes, CGST, SGST etc. complete all as per drawings and specification and directed by the Engineer-In-Charge

a) Brass inlay of size 6mmX6mm with one side polishing

b) Brass inlay of size 8mmX8mm with one side polishing

Providing and fixing brass T section of on dado having size of 12 mm X 12 mm or approved size, design & patterned of fine finished on top including sharp cutting the tiles / marble / greanite flooring / dado etc and making grove on existing flooring / dado with sharp cutting with cutter machine as per approved design and patterned approved by competent authority including cost of brass "T" section, labour, tools and plant, fixing adhesive material, required scaffolding, transportation, wastage etc. including taxes, CGST, SGST etc. complete all as per drawings and specification and directed by the Engineer-In-Charge

Dimond polishing with Machine with Mirror finished on stone finished surface i.e. flooring /dado to give high gloss finish etc. including cost of matching pigment of tiles, greanite, marble with grouting the joints including of labour, material including cost of machinary, polish stone, pigments for matching to greanite, marble stone with glossy finished etc. all complete as per specification and as directed by the Engineer-In-Charge.

Description of Work / Item(s)

Amount

PART B : Electrical light Fittings

Supply, installation, testing & commissioning of square(2x2) type recess mounted LED fixture with min efficacy :- 105 lm/W, min.lumen output :-3600 Lm , CCT :- 5700/6500K min.CRI :- 80 min. P.f :- 0.95 min. I.P :- 20 Housing:- CRCA & prismatic diffuser. complete with safety chain for secondary support and as per instruction of EIC. Note: 1) Scope of work also includes dismantling the existing lighting fixture & handing over to dept. in good condition. 2) 5 years Warranty certificates shall be submitted to department

Supply, installation, testing & commissioning of recess mounted circular downlight LED fixture with min efficacy :- 105 lm/W, min.lumen output :- 1200 Lm , CCT :- 5700/6500K min.CRI :- 80 min. P.f :- 0.95 min. I.P :- 20 Housing:- Pressure die cast Al. complete with safety chain for secondary support and as per instruction of EIC. Note: 1) Scope of work also includes dismantling the existing lighting fixture & handing over to dept. in good condition. 2) 5 years Warranty certificates shall be submitted to department

Replacement of existing ceiling fandown rod with new one of length 800mm approx. complete with 16 guage safety chain for secondary support. Scope of work includes disconnection of ceiling fan, replacement of existing down rod and providing dept supplied 3C x 1.0 Sq.mm cu flexible cable of suitable length and installation of ceiling fan with connection to existing point.

Description of Work / Item(s)

Amount

PART-C - REBATED ITEMS

Rebate for Taking away dismantled item by the contractor

a) Teak wood frame

b) Panelled door shutters 32mm thick (approx.)

c) CP Brass PH Items like bib tap, pillar cock stop cock, Towel rod , shower rose etc.

d) GI/CI pipe of various dia., grills, railing etc.

e) G M Valve up to 50mm

f) Scrap wood

KANTI FURNITURE WORKS (BID ID -3248368)

KANTI FURNITURE WORKS (BID ID -3248368)

AMBIKA ENTERPRISE (BID ID -3247129)

AMBIKA ENTERPRISE (BID ID -3247129)