CERTAIN B/R REPAIRS TO JOINERY, FALSE CEILING ROOFS, FLOORING, PLUMBING, ELECTRICAL WIRING, ELECTRICAL FITTINGS AND FIXTURES AND OTHER MISC WK IN OTM ACCN OF SITE-III AT FATEHGARH

Amount

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

M&L half brick thick walls built in CM 1:4 Sub Class B bricks straight or curved on plan to any radius complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M&L 15mm thick cement plaster in CM 1:6 as in patches n.exc. 3 sqm on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement complete all as specified and directed

All as per item No.06 above but in CM 1: 4

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm each not exc 4.00 sqm each. complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle complete with glazing bars,dovetailed or welded complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, complete without glazing bars,dovetailed or welded complete all as specified and directed.

S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed

M & L for framed work such as guard bars made of square bars fixed to flat iron or to box type window frame confirming to Fe-290 gde E-165 complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixing in opening as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S Frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock and bottom rail on either side & as gap insert for tip rail & bottorm rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/seated to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing.

M&L for MS work as in Framed work as in chowkhats of doors or gates of angle or other section with gusset plates, rails, braces, etc.,conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F 35 mm thick Plain, framed,panelled shutters(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted tochowkats complete all as specified and directed.

S&F 35 mm thick 2nd class hardwood as in Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed.

S & F mild steel sliding door bolt 300mm long clip type, stove enamelled black with bright bolt not less than 16mm dia complete all as specified and directed.

S & F mild steel barrel tower bolt 200mm long, stove enameled black with bright bolts complete all as specified and directed.

S & F mild steel pressed handle oval type stove enameled black of size 150mm complete all as specified and directed.

S&F mild steel butt hinges cold rolled of size 100mm medium weight complete all as specified and directed.

S&F butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed of size 100mm type E-22 complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S & F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wooden beads to steel windows/wooden doors complete all as specified and directed.

S & F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples,rivets,wooden beads to steel windows/wodden doors/windows complete all as specified and directed.

M&L preparing new surfaces of wood and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L Preparing new surfaces of steel and applying two coats of synthetic enamel paint, complete all as specified and as directed.

All as per item No.31 above , but over a coat of red oxide zinc chrome primer.

S&F Vireous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe (excluding flush pipe and flushing cistern) all as spd but fixed in repair complete all as specified and directed.

S&F in renewal for PVC low level flushing cistern 10ltr capacity, with syphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc incl PVC connection 450mm long complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tank vertical with closed top of 500 ltrs capacity and fixed in position all as specified in SSR Part-I including disconnecting existing tanks complete all as specified and directed.

M & L for two coats of Cement based paint over a coat of alkali resistant primer on new plastered wall surfaces including preparation of surface complete all as specified and directed.

M & L Two coats of Oil bound distemper on new plastered wall suerfaces over a coat of alkali resistant primer including preparation complete all as specified and directed.

Dismantaling of asbestos cement (Corrugated, semi corrugated etc) sheeting in roof covering complete all as specified and directed.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roof, fixed with L type or J type or cranked hook bolt complete all as specified and directed.

S&F 0.63 mm Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) including rivets, seals etc , complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets complete all as specified and directed.

S&F False Ceiling Horizontal level regular edge grid 600 x600 mm from work using hot dip sections and fixing tiles vinyl laminated MPL gypsum panels size 595x595x6 to 8mm thick after lamination, suspended the grid with grid hangers to Roof Truss / RCC Slab all as per manufactured instruction complete all as specified and directed

Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving n.exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

M&L PCC type C-2 (1:3:6) (using 20mm graded stone aggregate), 50mm thick as in Plinth Protection finished even and smooth etc complete all as specified and directed.

M&L 40 mm thick PCC type B-0 (1:2:4) (using 12.5 mm graded stone aggregate) as in flooring as in patches n.exc. 3 sqm finished even and smooth using extra cement etc complete all as specified and directed.

Demolition and breaking up drain pipes 100 mm dia(Salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls including fixing with clamps complete all as specified and directed.

S&F 110 mm bore PVC(SWR) bend any radius complete all as specified and directed.

S&F in repair clamps for CI/PVC pipe made out of 25x 5 mm flat iron fixed to wall by means of stainless steel fastener of size 10mmx72mm(2 No.s for each clamp) complete all as specified and directed .

Dismantling framed work timber scantlings 40sq. cm and over in section, in any position all as specified and directed.

M & L for 2nd class hard wood scantling as in frame work all as specified and directed.

Taking down copper/aluminium point wiring of any discription and any position (light, fan, socket or power point) complete, including taking down of fixture and fittings such as switches,socket, ceiling rose,lamp holder,pendants, bracket exhaust fan, ceiling fan and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed

Taking down Aluminium sub main wiring and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and as directed

M&L for point wiring with 1100 volt grade PVC insulated and unsheathed 1.5 Sq mm (FRLS) multistranded copper conductor cable with continuous earth wire of 1.5 Sq mm (FRLS) multistranded copper conductor cable PVC insulated and unsheathed, drawn in & including concealed PVC rigid conduit medium grade with fittings (ISI marked) not less than 20 mm dia & 1.6 mm thick sunken pressed steel galvanised terminal boxes with top cover ISI marked plastic laminated hylam sheet for housing/ fixing switches etc complete all as specified and directed for the following- Note- (i) The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4, paint / distemper / white waste etc and surface finished to match the existing surface & colour.

(a) One light/fan/exhaust fan point controlled by one switch.

(b) One 5 pin 5 Amp switch socket combination point on an independent board.

(c) One 5 pin 5 Amp socket point controlled by one switch on same board.

All as per item 54 here in before but for one 15 Amp 6 Pin switch socket combination independent with 4 Sqmm FRLS unsheathed copper conductor single core multistranded complete all as specified and directed.

S&F switch piano flush type 5 Amp single pole one way complete all as specified and directed.

Fixing only switch piano flush type 5 Amp single pole one way complete all as specified and directed.

S&F switch socket combination 2 in 1 flush type 5 Amp 5 Pin complete all as specified and directed.

S&F switch socket combination 5 in 1, 5/15 Amp flush type complete all as specified and directed.

M & L lamp holder PVC/Polycarbonate type insulated body with back plate angle type for batten fittings complete all as specified & directed.

Supply and fix electronic fan regulator 5 stepped type complete all as specified and directed

S&F ceiling rose PVC / Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.

M&L for sub main wiring with two single core 6 Sqmm FRLS copper conductor PVC insulated and unsheathed cable in & including concealed PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 4 Sqmm FRLS insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 6 sqmm FRLS and one run of 6 sqmm FRLS copper conductor shall be measured as one unit length.) ( Note :- Two runs of 6 sqmm FRLS one run of 6 sqmm FRLS copper conductor & one run of concealed conduit pipe shall be measured as one unit length.)

Supply and fixing in renewal of VTPN DB suitable for Mounting MCCB as Incomer of rating 63 Amp Vertical distribution board 4 way with suitable rated bus bar having IP-43 protection and double metal door concealed in wall including connection with aluminium thimbles as required complete all as specified and directed.

Supply and fixing in renewal MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified and directed. (Make : Legrand cat part No 5076 11 or equivalent model as specified make as approved by GE)

Fixing only ceiling fan already taken down with point wiring including connection complete with all accessories and down rod all complete all as specified and directed.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip armoured service cable pole to building electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 4 core complete all as specified and directed.

S&F in renewal of 40 mm bore GI tubing light grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall for cable protection with suitable size of MS clamps and nut and botls/washers complete all as specified.

M&L for boring holes horizontally under road without damaging the surface of road ( minimum 1.0 Metre below the road surface with the help of GI tubing not exc 80 mm bore(dia) for passing UG cable, complete all as specified and as directed. NOTE : - GI Pipe laid will be measured and paid separately under respective item

M&L for sand cushioning to under ground cable provided with layers of sand ( 8 cm deep before laying cable and 15 cm after laying cable) complete all as specified and directed.

Material and labour for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtrs wide and not exceeding 1.5 mtrs in depth for laying of cables including getting out in any type of soil complete all as specified and directed.

Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil complete all as specified and directed

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed

S&F in renewal of MCCB 63 Amp, 16KA, 4 Pole including complete electrical connection by appropriate size of copper lugs complete all as specified and directed

S&F in renewal of MCB SPN 16-40 Amp 240 volt 'C' curve complete all as specifed and directed.

S&F MCB in renewal of MCB SP 6 to 32 Amp 240 Volt 'C' curve 10 KA complete all as specified and directed.

S&F in renewal surface and wall mounted 18/20W LED extruded aluminium batten fitting provided for efficient heat description including LED retrofit polycarbonat tube all as specified and directed.

S & F LED light fitting 1x9W / 1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED T8 batten fitting 10W MS white powder coated with PC tube retrofit complete all as specified and as directed. (Make :- C&S Cat No LTD C 01210WLED/WD) & equivalent in Philips/ Bajaj )

M&L for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and riveted to earth plate by means of nuts, bolts, check nuts & washers, of galvanized iron or steel with connected to test point and testing on completion including 15mm GI light grade pipe for earth lead protection from earth point to earth plate, including provn adequate quantity of charcoal dust mixed with 35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate with 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire mesh with and including all necessary excavation & earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:- (i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor.

M/S WASEEM KHAN CONTRACTOR

M/S S P CONSTRUCTION

Shree Gopal Engineers & Contractor

M/S SRI JAGDAMBE TRADERS