SPECIAL REPAIRS TO PORTA CABIN (T-24) TEMPORARY ACCOMODATION AT INS BAZZ, AT CAMPBELL BAY.

Amount

Dismantling of existing old roof galvalume sheets, plain or corrugated of any thickness and gauge complete all as specified and directed

Dismantling of structural steel work as in roof purlins, rafters, posts wall pannel supports etc complete all as specified and directed

Dismantling of existing worn out wall panels of any thickness including cover fillet and doors and windows with fittings of any description etc complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the retreived debris out side the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exe 15cm thickness (below or above ground level) and removing the retreived debris complete all as specified and directed.

Demolition of block masonry built in cement plaster and removing the retreived debris out side the premises complete all as specified and directed.

Dismantling of false ceiling boards including fillets and framed work of any description, etc complete all as specified and directed

Material & Labour for use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

Material & Labour for use and waste of formwork to chajjas, troughs and similar items including edges for rough finished surfaces of concrete flat complete all as specified and directed.

Material & Labour for Reinforced cement concrete 1:2:4 Type B1 using 20 mm graded stone aggregate as in beams, bands, cantilevers, bressummers, lintels, complete all as specified and directed.

Material & Labour for Reinforced cement concrete 1:2:4 Type B1 using 20 mm graded stone aggregate as Chajjas complete all as specified and directed.

Material & Labour for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

Material & Labour for Mild steel TMT reinforcement bars of 5 mm dia and over up to 10 mm dia in stirrups, spacers and binders, cut to length bent to shape required including cranking, binding spirally for hooping for columns hooking ends and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clip all as specified and directed.

Material & Labour for precast cement concrete block masonry with hollow solid blocks, exc. 10 cm in width of type C1 1:3:6 (using 20mm graded aggregate) setting in CM 1:6 complete all as specified and directed.

Material & Labour for Rolled mild steel sections conforming to Fe 410 -W (Gde E- 250) as in main and cross beams, hip and jack rafters, purlins and framed trusses where connected to common rafters fixed with angle cleats or other connecting plates complete all as specified and directed.

Supply & Fix of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Supply & Fix of Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge and valley fixed with self tapping screws as specified and directed.

Material & Labour for Rendering 10 mm thick internally in cement plaster 1:6 on fair faces of concrete/block masnonry surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material & Labour for Rendering 15 mm thick externally in cement plaster 1:4 on fair faces of concrete/block masnonry surfaces surface finished fair and even mixed with WPC as per manufacturer's instructions complete all as specified and directed. (Note :Supply only of WPC shall be measured and paid separately).

Supply only of Integral waterproofing compound of approved make all as specified and directed.

Material & Labour for nonskid coloured Ceramic joint free tiles (Matt finish) 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cement mortar 1:6 over 25 mm thick PCC screed 1:2:4 type B-0 using 12.5 mm graded stone aggregate complete all as specified and directed.

All as per item No 21 above but on vertical surfaces as in skirtings over 10 mm thick rendering in cement mortar 1:4 all as specified and directed.

Material & Labour for Nonskid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cement mortar 1:6 over 25 mm thick PCC screed 1:2:4 type B-0 using 12.5 mm graded stone aggregate complete all as specified and directed.

Material & Labour for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Material & Labour for 75m mm thick plain cement concrete type C-1, 1:3:6 mix using 20mm graded stone aggregate as in plinth protection, pavings, path etc. surface finished even and smooth without using extra cement including making 6 mm wide grooves to full depth at 2 to 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ration of 1:3 by weight complete all as specified and directed.

Supply & Fixing of 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework in ceilings with and including Anodised aluminium snap grid frame work of size 605 x 605mm for false ceiling with runners aluminium anodised main Tee of section 35x35x1.5mm thick cross T of section 25x25x1.5mm thick & aluminium anodised angle of size 25mmx1.5mm thick section fixed along side of wall fixed with necessary plugs & hanging from ceiling/MS purlins with and including 4mm GI wire suspension system including necessary scaffolding and applying three coats of white wash over ceiling boards complete all as specified and directed.

Material & Labour for Preparation of new or previously un treated surfaces of steel and iron surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome paint all as specified and directed.

Material & Labour for preparation of newly plastered or unplastered surfaces of walls and applying two coat of distemper oil emulsion white tinted over a coat of alkali resistant primer complete all as specified and directed.

Material & Labour for preparation of newly plastered or unplastered surfaces of walls and applying two coat of cement base paint over a priming coat complete all as specified and directed.

Supply & Fix standard aluminium anodised section as in frame, shutters for doors, window/ventilators fixed / openable / sliding or in any pattern, cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets/aluminium clips for fixing glass,hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc complete all as specified and directed (Aluminium section shall be of make Jindal/Hindalco/ Indalco) Note:- Weight of Aluminium sections as per actual or as per IS, whichever is less shall only be considered for payment. Cost of other items / accessories required for entire completion of the work shall be deemed to be included in the quoted rate. However glass panes, shall be measured and paid separately as supply only under respective items.

Supply only 4 mm thick Sheet Glass, ordinary quality and glazing with aluminum windows complete all as specified and directed.

Supply only 12 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed to aluminum doors / partitions complete all as specified and directed.

Supply & Fixing of Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply & Fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, supply and fixing in opening as per specification given under SSR Part II 2010 including making good the disturbed surface complete all as specified and directed.

Supply & Fix factory made solid PVC door shutter 30mm thick ( style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail , lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of both side prelim PVC sheet to be fitted in the MS frame welded/ sealed to the sties & rails with suitable PVC sheet beading and jointed together with solvent cement sapling & fixing in the frame at site as per specifications and drawing given under SSR Part-II 2010 complete all as specified and directed.

Supply & Fix 100 mm long Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised, type C-21 complete all as specified and directed.

Supply & Fix 150 mm long Aluminium anodised barrel tower bolts of extruded aluminium section complete all as specified and directed.

Supply & Fix 150 mm long Aluminium alloy handles cast type anodised complete all as specified and directed.

Supply & Fix in repairs of Vitreous China wash down water closet pan, pedestal pattern, white with and including 10 lit capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including necessary brackets complete all as specified and directed.

Supply & Fix in repairs of Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including brackets and brass, chromium plated, waste fittings and waste pipe complete all as specified and directed.

Supply & Fix in repairs of CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.

Supply & Fix in repairs of PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supply & Fix in repairs of Stop valves 20 mm bore, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply & Fix in repairs of Stop valves 15 mm bore, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply & Fix in repairs of 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply & Fix in repairs for 75mm dia outlet PVC (SWR) floor trap of plain with grating including jointing with solvent cement complete all as specified and directed.

Supply & Fix in repairs of 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply & Fix in repairs of 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply & Fix in repairs of 110 mm bore PVC (SWR) bend of any radius complete all as specified and directed.

Supply & Fix in repairs of 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal fitted with access door complete all as specified and directed.

Supply & Fix in repairs of 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

Supply & Fix in repairs of 100 mm dia PVC (SWR) vent cowl complete all as specified and directed.

Supply & Fix in repairs of aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Taking down old unserviceable point wiring, (light, fan, socket or power) complete including fittings & fixtures such as switch, ceiling rose, pendants, regulator, socket, holder etc., and making good the disturbed surface of wall, floors, ceiling etc to match with the existing including touch up of paint/white wash all as specified and directed by Engineer- in-charge.

Material & Labour for point wiring with 1.5 sqmm PVC insulated (R/Y/B for phase and black for neutral) unsheathed, multi stranded copper conductor, 1100 volt grade, FRLS cable in and including PVC casing/caping not less than 2mm thick with all accessories and 1.5 sqmm green in colour PVC insulated stranded copper conductor cable for earth continuity connected to common earth dolly including pressed steel terminal box/ PVC box surface/ flush type with 3 mm thick pre laminated hylem/PVC sheet for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed by Engineer-in-charge for one light/fan point controlled by one switch.

All as per item no 58 above but for 3 pin 5 Amps socket outlet point on same board.

All as per item no 58 above but for 3 pin 5 amps socket outlet point on the independent board.

Supply & Fix Exhaust fan, AC single phase, 230 Volts, of size 300 mm sweep with louvers complete all as directed. Make : Havells/Bajaj or Equivalent in CG.

Supply & Fix ceiling fan 1200 mm sweep fan, BEE 5 Star rated, single phase, 230 V, with all accessories complete all as directed. Make : Havells 1200 mm ES-50 five stare sealing Equilalent in CG.

Supply & Fix ceiling fan regulator Electronic step type suitable for fan 1200 mm sweep fans complete all as directed.

Material & Labour for point wiring with 4 sqmm PVC insulated (R/Y/B for phase and black for neutral) unsheathed, multi stranded copper conductor, 1100 volts grade, FRLS cable in and incl PVC casing/caping not less than 2mm thick with all accessories and 4 sqmm green in colour PVC insulated stranded copper conductor cable for earth continuity connected to common earth dolly including pressed steel terminal box/ PVC box surface/ flush type with 3 mm thick pre laminated hylem/PVC sheet for mounting fittings such as switches, sockets, etc complete all as specified and directed for one 15 amp socket controlled by one switch in and including PVC casing caping complete.

Supply & Fix piano type switch 5 amps single pole complete all as specified and directed.

Supply & Fix ceiling rose surface type 65x50mm three terminals complete all as specified and directed.

Supply & Fix switch socket outlet combination, multipurpose, 2 in 1 flush type, 5 and 15 amps, 3/3 pin 230 volts complete all as specified and directed.

Supply & Fix socket outlet 5 amps 3/5 pin 230 volts flush type complete all as specified and directed.

Supply & Fix lamp holder (Angle/bracket) insulated body with back plate for batten fittings complete all as specified and directed.

Supply & Fix switch socket combination 5 amps 3/5 pin 230 volts flush type complete all as specified and directed.

Supply and fixing in replacement of LED tube light fitting, 1x20 watt 230 volts, energy efficient complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75 sqmm complete all as specified and directed. Make :- Bajaj Cat Part No BLTRU VIVA with 1 x 20 W lamp equivalent in Philips/wipro/Havells

Supply and fixing in replacement of LED tube light fitting, 1x10 watt 230 volts, energy efficient complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size 0.75 sqmm complete all as specified and directed. Make :- Bajaj Cat Part No BLTRU VIVA with 1 x 10 W lamp equivalent in Philips/wipro/Havells

Supply and fix Recess mounting LED 2x2 luminaire,36 Watt natural white complete all as specified and directed. Make:Crompton LCTLRN-36-FO-CDL,luminaire type: 36W/Philips/ Bajaj Equvalant

Disconnecting, taking down and refixing the existing 10 way DB, 6 amp MCB (04 nos) ,10 amp MCB (03 nos) & 20 amp MCB (01 nos) single pole complete all as directed by Engineer-in-Charge

Taking down the existing split type air conditioner of capacity 1.5/2.0 TR carefully from the installed position, dismantling the complete unit, cleaning all dust, tinkering wherever required, reassembling the complete unit and re-installing in its original position and testing on completion complete all as specified and directed.

Material and Labour for filling up & charging of R-22/R410 as per site requirment refrigerant for split type air conditioner of capacity 1.5/2.0 TR, after leak testing of complete system and making good by bracing complete all as specified and directed.

Material & Labour for earthing complete with GI earth plate electrode 60cmx60cmx6mm thick burried directly in ground in earth pit not less than 2.25 mtr depth below normal ground level with top edge of the plate vertically to depth of not less than 1.5 mtr below ground level connected to & including GI earth wire 4.00 mm dia as earthing lead connecting to equipment by means of GI bolts & nuts etc with provision of charcoal and salt etc all as per electrical plate No-3 of SSR part-I 2009 including RCC cover and MS angle iron frame, watering with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork in any strata and testing on completion etc. complete all as specified and directed by Engineer-in-charge.

NOTE : An Amount of Rs 26,774/- towards Schedule of Credit shall be deducted to arrive the Contract Sum

M/s Sriya Enterprises

ANITA VARMA ENTERPRISES

KARMAKAR CONSTRUCTION