Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹2.9 Cr
EMD Value
₹4.3 L
Closing Date
22 Sept 2025, 10:59 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka State Pollution Control Board
MR.Sridhar S Malhari
Construction of KSPCB Regional Office building at Gadag.
KSPCB/2025-26/BD/WORK_INDENT39
KSPCB/2025-26/BD/WORK_INDENT39
Open
Buildings
Two Tender Document System(Two Cover)
KSPCB Head Office Bangalore
13 documents required · 13 mandatory
The tenderer should be a valid Class II and above registered contractor in KPWD/CPWD and also should have registered in Government of Karnataka e- procurement platform. Registration certificate to be uploaded.
Other terms and conditions as per Tender Document.
The tenderer shall give the details of works, satisfactorily completed as prime contractor, at least one similar work to an extent of 50% of the cost of the work i.e Rs.144.70 Lakhs. ie., between 2020-21 to 2024-25
The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works totaling Rs.14.62 Lakhs (usually not less than 50% of the electrical works) in any once year
The Tenderer or his identified sub-contractor should have executed similar water supply/sanitary engineering works totalling Rs.3.27 Lakhs (usually not less than 50% of the water supply/sanitary engineering works) in any one year
Item of Work Minimum Quantity RCC work 355.55 Cum Vitrified/ Ceramic Flooring 436.00 Sqm Fabrication and Steel Reinforcement 44.46 Tonne Stone Masonry 207.00 Sqm PCC 116.00 Cum Cobble Stone 572.00 Sqm
The tenderer shall deploy plant and machinery required as per proforma enclosed in tender document for successful completion of the proposed work. 1.concrete mixer 2nos 1 own, 1Hire/Lease /Rent 2.Pin Vibrators 8 nos 4 own, 4 Hire/Lease /Rent 3.Tipper/Tractor 2 nos 1own, 1 Hire/Lease /Rent 4.Hoist and pulley 4 nos 2 own 2 Hire/Lease/Rent.
The tenderer shall give information of any litigations of the previous works in the format given in the tender document.
The tenderer should furnish existing commitments and on-going works. This has to be supported by a certificate issued by the officer not below the rank of an Executive Engineer. As per proforma enclosed in tender document.
The tenderer should furnish PAN, registration certificate (GST) along with GST returns filed for the last years.
The tenderer should have achieved in at least two financial years in last 5 years ie., 2020-21 to 2024-25 a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.578.80 Lakhs. In support of this claim, he has to provide year wise audited statement of account duly certified by the chartered accountant.
The amount put to tender is exclusive of GST. GST will be paid separately to the quoted rates.
The tenderer shall produce Liquid assets and/or availability of credit facilities of not less than Rs.77.00 Lakhs. (Credit lines/ Letter of credit/ Certificates from Nationalized/Scheduled Banks for meeting the fund requirement etc). during the tenure of the contract as per proforma enclosed in tender document.
Tender bid capacity Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under assessed available tender capacity equal (AxNx1.5 minus B). The available tender capacity calculated sheet should be up loaded as per tender document.
The tenderer should furnish copy of income tax returns for 3 years out of last 5 years ie., 2020-21 to 2024-25.
₹5,000
₹4.3 L
21 Aug 2025
21 Aug 2025
23 Sept 2025
11 Sept 2025
11 Sept 2025
Construction of KSPCB Regional Office building at Gadag.
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work
Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing an...
Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine ggregates as per relevant IS ...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m to 3.5...
As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate.For Plinth Beam 60percent
As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate.For Footing - 8percent
As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate.For Sump tank walls- 10percent
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...
As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For chejja 45percent
As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For roof beams 60percent
As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For columns 70percent
As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For roof slabs 50percent
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to djacent...
CLAY HOLLOW BRICKS (Extruded) Providing and constructing thick clay hollow brick masonry in cement mortar 1:6 using horizontal perforated clay hollow brick with minimum crushing strength of 35 kg/sqcm...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...
Providing and fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimumTiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08percent and conforming to IS: 15622, of approved make,...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...
Varnishing with varnish of approved brand and manufacture :Two coats of glue sizing with copal varnish over an under coat of flatting varnish to give an even shade and produce a smooth dry and mat sur...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 ltr/10 Sqm) over and including priming coat of exterior primer applied at 2.20kg/10 Sqm to give an e...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls at 1.25 ltr/10 Sqm over and including one coat...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and laying heavy duty cobble stones 75mm thick interlockpavers, using cement and course sand for manufacture of blocks ofapproved size, shape and colour with a minimum compressive strength o...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing,polishing and making curvature (wherever required) and fittin...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/ Sunken portion of WC:Bathroom, cold applied...
Providing and laying water proofing treatment to the Water tanks and Liquid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 percent) total coated thickness with zinc coating...
Compound wall - Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm a...
Compound wall - Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barri...
Compound wall - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per r...
Compound wall - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm ...
Compound wall - Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works and other parallel works from 0.50m t...
Compound wall - As per recommendations of technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate.For footing - 8percent
Compound wall - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m heigh...
Compound wall - As per recommendations of Technical working group, rates for formwork shall be added on percentage basis to the finished concrete item rate. For columns - 70percent
Compound wall - Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, h...
Compound wall - Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all mater...
Compound wall - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with ceme...
Compound wall - Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 ltr/10 Sqm) over and including priming coat of exterior primer applied at 2.20kg/10 ...
Compound wall - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete...
Electrical works - Supplying of recess mounting non integral type LED w luminaire comprising of pressure decast/extruded aluminium housing,with spring loaded false ceiling clamps, Power LEDs with CCT ...
Electrical works - Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing,with spring loaded false ceiling clamps, Power LEDs ...
Electrical works - Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mai...
Electrical works - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and ...
Electrical works - Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours and 70percent lumen maintenance with CRI greaterthan 8...
Electrical works - Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 12" Sweep (300 mm)
Electrical works - Supplying ......TR split Air conditioners suitable for operation on A/C supply single phase 50 Hz 230 V with hermetically sealed compressor with air cooled condenser, motor capacito...
Electrical works - Supply erection, testing, commissioning of Cassette type split Air conditioners suitable for operation on single/ three phase AC supply, hermetically sealed compressor with air cool...
Electrical works - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Inje...
Electrical works - Brackets for LED Street Lights.
Electrical works -Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO ...
Electrical works - Supply, Erection, testing and commissioning of AMF panel suitable for .....kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bo...
Electrical works - Supply, erection, testing and commissioning of ......KVA 5Star rated Aluminium/Copper wound Distribution Transformer 11 KV/433V with Off Load Tap Switch, Buchholtz relay winding tem...
Electrical works - Supplying And fixing/ replacing of 6/16/32A electrical accessories on existing switch board. i)16A SP Switch
Electrical works - Supplying And fixing/ replacing of 6/16/32A electrical accessories on existing switch board. ii) 16A Three Way 5 Pin Socketii) 16A Three Way 5 Pin Socket
Electrical works - Supplying And fixing/ replacing of 6/16/32A electrical accessories on existing switch board.iii) 6A SP Switch
Electrical works - Supplying And fixing/ replacing of 6/16/32A electrical accessories on existing switch board. 6A Three Way 5 Pin Socket
Electrical works - Supplying And fixing/ replacing of 6/16/32A electrical accessories on existing switch board. v) Electronic stepped regulator
Electrical works - Supplying And fixing/ replacing of 6/16/32A electrical accessories on existing switch board. vi) 32A Bakelite DP
Electrical works - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ...
Electrical works - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short ...
Electrical works - Panel Board, MCCB. Contactor, Change over switches, Busbar. Voltmeter and Ammeter, ELR
Electrical works - Earthing and wiring conduit
Electrical works - Cabling and Earth Work
Electrical works - Sinking of Borewell 150 dia with all accessories like Motor, casing, panel board includng installation and commissioning.
Water supply and sanitary works: Constructing brick masonry chamber of internal dimension 600x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concret...
Water supply and sanitary works: Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and l...
Water supply and sanitary works : Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and ...
Water supply and sanitary works: Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and l...
Water supply and sanitary works: Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P....
Water supply and sanitary works: Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, inclu...
Water supply and sanitary works: White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
Water supply and sanitary works: Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thic...
Water supply and sanitary works: Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 2...
Water supply and sanitary works: Providing and fixing brass stop cock of approved quality : 20 mm nominal bore
Water supply and sanitary works: Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore
Water supply and sanitary works: Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore
Water supply and sanitary works: Unplasticised P.V.C.connection pipe with brass union 30 cm long 15mm bore
Water supply and sanitary works: Providing and placing on terrace 9at all floor levels) polyethylene water storage tank IS:12701 marked with cover and suitable locking arrangements, making holes for i...
Water supply and sanitary works: Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fit...
Water supply and sanitary works: Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fit...
Water supply and sanitary works: Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fit...
Water supply and sanitary works: Providing and fixing Chlorinated Poly Venyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fi...
Water supply and sanitary works: Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automati...
Water supply and sanitary works: Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in CC 1:2:4 as per directions (Rate is inclusive of c...
Rain water harvesting - Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light ...
Rain water harvesting - Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light du...
Rain water harvesting - Providing stoneware gully trap of approved quality and make fixing in M-15 and plastering with CM 1:3 wherever necessary. S.W. gully trap P type 150X150 mm. size P/S' trap
Rain water harvesting- Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barr...
Rain water harvesting - Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils...
Rain water harvesting - Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils...
Rain water harvesting - Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading a...
Rain water harvesting- Providing and fixing 7.5 cms to 15.00 cms dia NP grating 100 mm dia.
Rain water harvesting - Supplying, filling, spreading and leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads and lifts, all complete as per ...
Rain water harvesting - Supplying, filling, spreading andleveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads an...
Rain water harvesting - Supplying, filling, spreading and leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads and lifts, all compl...
Rain water harvestings - Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading and sizes as per actual requirement,...
Rain water harvesting - Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000x450x50 mm, reinforced with 8 mm dia four nos...
Rain water harvesting - Supplying, assembling, lowering and fixing in vertical position in borewell, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of...
Rain water harvesting - Supply of RCC ring of 1500mm dia , thickness 80mm with depth 450mm(say) for recharge wells
Complete Supply, installations and Commissioning and 5 years comprehensive Maintenance of 15kw Solar PV Roof Top Power Plants with Net metering Facility poly/ multi-crystalline silicon solar PV module...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Cost of purchase of Furnitures (Standard Godrej/ equivalent items are considered) required for Conference hall, office and other rooms. All work shall be completed to finishing level and n...
Furniture - Providing and fixing storage unit of 0.75m depth made out of 19mm thick commercial ply vertical support finished in approved 1.00mm laminate with 12mm thick ply packing internally finished...
Landscape - Cutting and cleaning thick jungle including plants upto 0.25 Mts girth and bushes including removal of roots with an initial lead of 50.00 Mts and lift of 1.50 Mts
Landscape - Cutting, cleaning thin jungle including vegetation and grass and removal of roots with an initial lead of 50.00 Mts and lift of 1.50 Mts.
Landscape - Cutting of unwanted Jungle / grass
Landscape - Clearing the area by sweeping / removing unwanted materials such as dried leaves, garbage etc.,
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Shrubs In Planting Developing the area for Shurbs by digging to a depth of 0.45 Mts , filling 50percent of the area with excavated top soil and remaining 50percent with Sand (0.0375 Cu-Mts...
Landscape - Hedges - Digging pits of size 0.45 Mts x 0.45 Mts x 0.45 Mts and filling up to 50 percent if the pits with top excavated soil and remaining 50percent with sand (0.0112 Cu-Mts):F.Y.M.(0.022...
Landscape - Hedges - Digging pits of size 0.45 Mts x 0.45 Mts x 0.45 Mts and filling up to 50 percent if the pits with top excavated soil and remaining 50percent with sand (0.0112 Cu-Mts):F.Y.M.(0.022...
Landscape - Development of lawn - Formation of lawn with following specifications (Maxica Grass dibbling) Scrapping and removing top soil (For Lawn Area Only) Cleaning the site by scrapping and removi...
Landscape - Development of lawn - Formation of lawn with following specifications (Maxica Grass dibbling) 1st Digging. Earth work digging including removing weeds,debries if any and breaking of clumps...
Landscape - Development of lawn - Formation of lawn with following specifications (Maxica Grass dibbling) 2nd Digging - Digging for second time and removing weeds, if any minor leveling etc., to a dep...
Landscape - Development of lawn - Formation of lawn with following specifications (Maxica Grass dibbling)Soil Filling For Lawn - Supplying and stocking good quality, Red Earth for filling the top laye...
Landscape - Development of lawn - Formation of lawn with following specifications (Maxica Grass dibbling) Providing sand,F.Y.M and Red Soil in the ratio of 1:3:6, and spreading to a depth of 7.50 Cms ...
Landscape - Development of lawn - Formation of lawn with following specifications (Maxica Grass dibbling) Chemical Fertilizers- Super Phosphates (50 Grams Per Sq - Mts at Rs0.22 per Sqm),Neem Oil Cake...
Landscape - Development of lawn - Formation of lawn with following specifications (Maxica Grass dibbling) - Supply of lawn grass - Maxican grass
Landscape - Development of lawn - Formation of lawn with following specifications (Maxica Grass dibbling) - Labour charges - Labour cost towards dibbling / laying of lawn inclusive of mixing of ingrad...
Landscape - Planting of palms - Digging pits of size 0.75 Mts x 0.75 x 0.75 Mts Mts and filling up to 50 percent if the pits with top excavated soil and remaining 50percent with sand (0.035 Cu-Mts):F....
Landscape - Cost of palms - ficus starlite
Landscape - Cost of palms - ficus Benjamina
Landscape - Cost of palms - A. Palms
Landscape - Cost of palms - Golden Cypress
Landscape - Cost of palms - Phoenix palm
Landscape - Earth Filling - Providing By Using Ordinary - Earth By Filling Spreading and Levelling to the Required Grade As Per Design
Flag post - Earth work in surface excavation by manual means for lowering and levelling the ground by chiselling and wedging in Hard rock for all works other than foundation and depth not exceeding 10...
Flag post - Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifi...
Flag post - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per...
Flag post - Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...
Flag post - Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchorin...
Flag post - Providing Brick work with clay flyash Non Modular brick of class designation 3.5 in superstructure above plinth level up to floor I level in Cement mortar 1:4 (1 cement : 4 coarse sand) in...
Flag post - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposite...
Flag post - Supplying and filling in plinth with sand under floors, foundation of Bridges including watering, ramming, consolidating and dressing complete.
Flag post - Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffol...
Flag post - Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills,...
Flag post - Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in...
Flag post - Providing and fixing Antique pole are made out of cast iron with internal box, polycarbonate globe with matching bracket, stainless steel screws, corrosion and UV resistant pu coating. 0.9...
Flag post - Providing and fixing Antique pole Chain are made out of cast iron UV resistant pu coating.
Flag post - Providing and fixing of 20feet Cast Iron pole with following specifications Size of pole Bottom 14 inch dia , top 3 inch dia No of Joint 2 nos with bolt and nut Bottom - cast iron foundry ...
Flag post - Providing and fixing stainless steel casing 304 grade for flag pole base 16 guage including material and labour charges complete as per the instructions of engineer incharge
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
02 Eligibility Criteria - Gadag.pdf
Others - Eligibility Criteria • 0.25 MB
06 technical specification gadaga.pdf
Others - Technical specification • 1.58 MB
05 Estimate Shedule B.pdf
Others - estimation • 0.64 MB
01 CONTACT DATA RO - Gadag.pdf
Others - Contact details • 0.24 MB
03 Genearl conditions - Gadag.pdf
Others - General Condition • 0.45 MB
04 Tender Document Gadag.pdf
Tender Document • 1.19 MB
07 Drawing gadaga.pdf
Others - Drawing • 0.42 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .