CERTAIN MISC REPAIR, PERIODICAL SERVICES, JOINERY WORK, PLUMBING AND SANITARY WORK OTHER CONNECTED ITEM TO MD ACCN IN MH LINES, STATION DENTAL MESS AND CERTAIN BLDG AT BHDC UNDER GE (EAST) DELHI CANTT-10

Amount

Demolition of brick work built in cement mortar including all quoins, pillars etc, complete all as specified and as directed.

M&L brick work with sub class B bricks straight or curved on plan exc 6 metre mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc. including raking out of joints, hacking for key, scrubbing down with water etc. of any description complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of walls, finished the surface fair and even without using extra cement complete all as specified and as directed.

M & L 15 mm thick rendering in cement mortar (1:4), on brick or concrete wall surface, mixed with water proofing compound, finished fair & even without using extra cement complete all as specified and as directed. (Note- WPC shall be measured & paid separately under relevent item No of this Sch as supply only)

M & L 10 mm thick rendering in cement mortar (1:3) on ceiling surface, finished even & fair without using extra cement complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

M&L 25 mm thick PCC 1:2:4, Type B1, using 20 mm graded stone aggregate, below tiles for levelling of existing surface complete all as specified and as directed.

M&L 7 to 8 mm thick, Non-skid coloured Ceramic tiles, area of each tile exceeding 0.11 Sqm but not exceeding 0.16 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles, laid over & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L glazed coloured ceramic tiles, 350 x 250 x 7 mm/450x350x7mm thick, in vertical surfaces such as skirting/dado etc, set and jointed in cement slurry, laid over & including 10mm thick rendering in cement mortar 1:4, set, jointed and pointed in white cement mixed with colour pigment to match the shade of tile complete all as specified and as directed.

M&L Vitrified tiles 10 mm thick (square/rectangular) of light shade polished, area of each tiles n.exc 0.36 sqm in floor etc set and jointed in cement slurry, over and incl 15mm thick screed in CM (1:6) and pointed. in white or coloured cement to match the colour of tiles complete all as specified.

M&L Vitrified tiles 10 mm thick (square/rectangular) of light shade polished, area of each tiles n.exc 0.36 sqm in skirting/dado and riser to steps etc set and jointed in cement slurry, over and incl 10mm thick backing coat plaster in CM (1:4) and pointed. in white or coloured cement to match the colour of tiles complete all as specified.

Taking down of chowkhat or frame (without taking off shutter from frame) area not exc 1.50 Sqm each including builder hardware fitting complete all as specified and as directed.

All as per item No 13 here in Before but area exc 1.50 Sqm & not exc 4.00 Sqm each complete all as specified and as directed.

Taking down shutters of any description area exc 1.00 Sqm but not exc 2.00 Sqm each leaf including builder hardware fitting complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section using FE-290 (Gde-E-165) with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 including taking down old guard bars complete all as specified and directed.

S&F 35 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 35 mm thick glazed & Skelton shutter of 2nd class hard wood open rebated & prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/wire mesh etc size of members of shutters as SSR Part-I (2010),section 8,clause 8.24 (a) all as specified and directed .

S&F solid PVC moulded door frame of size 50x47mm, made out of 5mm thick one side prelaminated and other side plain colour PVC sheet & edges will be painted to match with prelaminated sheet, reinforced with MS square tube fixed with screw/plugs to brick walls complete all as specified and as directed.

S&F Factory made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F 100mm size, mild steel butt hinges, cold rolled, medium weight, fixed with Stainless steel screws complete all as specified and as directed.

S&F 100mm size, Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F hydraulic door hinges, fancy type, stainless steel, fixed to cup board and similar items complete all as specified and directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, cast type anodised complete all as specified and as directed.

S&F 200 mm long Stainless steel handles, Fancy type and fixed complete all as specified and as directed.

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extrunded sections and fixing bolts and sliding bolt of extrunded sections or cast aluminium alloy complete allas specified

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed

S&F 3.0 mm sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm, fixed with stainless steel screws complete all as specified and as directed.

S&F in repair 18 mm thick PVC board, fixed with screws to timber framed work including taking down old boarding, as in shelves, shutters, etc complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for Cement concrete 1:4:8, Type D-2, using 40mm graded stone aggregate, as in foundation, filling and mass concrete complete all as specified and as directed.

Supply and laying dry river sand for cushioning to interlocking paver block including punning down of sand complete all as specified and as directed. Note: for measurement purpose punned thickness of sand only shall be considered.

M&L for 80 mm thick, Machine pressed precast concrete interlocking rubber moulded paver block any shape, colour and size confirming to IS 15658-2006, M-40 Grade, with grey cement and pigment complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling of timber scantling of any size and shape complete all as specified and as directed.

S&F mild steel rolled sections, Framed work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, using FE-290 (Gde-E-165) complete all as specified and directed.

S&F in repair, in position Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50mm thick of approved colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, Chajja etc fixed with self tapping screws as specified, high tensile alloy steel trap sheet having 55 MPA yield strength and zinc (galvanized ) + Aluminium combined, coating of 150 GSM /PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to7 micron Epoxy primer fixes, RMR 1040 profile width 1125 mm complete all as specified & as directed.

All as per item No 42 here in before but plain sheet as in ridge/valley/gutter complete all as specified & as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work etc complete all as specified and as directed.

S&F Gl powder coated frame work, grid size 605x605mm, for seamless ceiling, comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm, fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and as directed.

S&F G.I. Hangers, 6 mm dia, (up to 1200mm length) adjusting level, fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size, 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed.

S&F 4.00 mm thick Non asbestos fibre cement building boards (E board) designer Pattern fixed or laid/ inserted to timber/GI/Aluminium frame work with screws complete all as specified and as directed.

M & L in repair 20mm thick Granite slab (of any type) work (table rubbed and polished), in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & half curving the edges of granite stone slab, over and including 20mm thick screed in cement mortar 1:6 including dismantling of old stone slab complete all as specified and as directed.

S&F in repair 3.0 mm sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm, fixed with stainless steel screws complete all as specified and as directed.

M&L preparation of new plastered wall surfaces and applying two coats of Oil Bound Distemper over and including a coat of primer & 3 mm thick cement based wall care putty complete all as specified and as directed.

M&L preparation of new plastered wall surfaces and applying two coats of weather proof Exterior emulsion paint of colour & shade as approved (Colour scheme shall be as approved by the GE & user) over and including a coat of priming paint & 3 mm thick cement based wall care putty complete all as specified and as directed. Make - Asian Apex Ultima or equivalent of make specified in PS.

M&L preparation of new plastered ceiling and applying three coat of white wash complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paints over and including one coat of pink primer complete all as specified and as directed..

M&L for preparation of new or previously untreated steel surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paints over and including one coat of red oxide primer complete all as specified and as directed.

M & L for complete removal of existing treatment from old decorated wall surface by scrapping by electrically operated grinder machine/electric regmal machine and applying one coat of 3mm thick wall care putty then scrubbing by sand paper to prepare a even surface and applying priming paint followed by applying two coats of OBD of any colour complete all as directed. (Asian Paints,Berger)

M & L for preparing the old surface of ceiling by washing down and rubbing and removing all loose layers of old treatment, efflorescence , soot and moss by wire brush and filling all nail holes and patches with cement wall putty and applying one coat of oil bound distemper on ceiling complete all as specified and directed. (Asian Paints,Berger)

M & L for preparing the old surface of wall by washing down and rubbing and removing all loose layers of old treatment, efflorescence , soot and moss by wire brush and filling all nail holes and patches with cement wall putty and applying with roller one coat of plastic emulsion interior gde paint (Asian Paints Royal Health Sheild) on walls complete all as specified and directed.

M & L for complete removal of existing treatment from old decorated wall surface by scrapping using electrically operated grinder machine/electric sand paper machine, washing down with water and applying one coat of 2mm thick wall care putty as levelling course, then scrubbing by sand paper to prepare a even surface and applying two coats of weather proof Exterior emulsion paint of colour & shade as approved over and including a coat of priming paint complete all as specified and as directed. Make - Asian Apex Ultima or equivalent of make specified in PS. Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required.

M&L for preparing the old painted wooden surfaces of any description exc 10cm width or girth by removing all dirt, dust, rust and grease, stopping and filling the holes and patches and priming the requisite surface with pink primer incl. applying one coat of synthetic enamel paint on patches and then applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparing the old painted steel surfaces of any description exc 10cm width or girth by removing all dirt, dust, rust and grease, stopping and filling the holes and patches and priming the requisite surface with red oxide/Zinc chrome primer incl. applying one coat of synthetic enamel paint on patches and then applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in Vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including P or S trap,complete all as specified.

M&L for PVC water closet seat cover , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S&F vitreous China squatting pan of “Orissa Pattern” of size 580x440mm white with integral footrest complete including making good floors complete all as specified.

S&F in repair 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe all as specified.

S&F in repair PTMT jet spray with 1.00 metre PVC tube, (suitable for European seat) C/omplete.

S & F in repair CP toilet paper holder with flat recessed type stainless steel C/omplete all as specified and directed

S&F in repair vitreous china wash hand basin white flat back of size 550 x 440mm including CI brackets, brass chromium plated 32 waste fitting coupling, waste pipe etc., complete all as specified.

S&F in repair Brass CP WHB Mixer valve for mixing hot and C/old water screwed down for 15mm dia iron pipe all as specified

S&F 15 mm fancy type chromium plated fancy type bib tap brass long body with flange screwed down high pressure CP cast copper alloy with crutch or butterfly handles scrwed down suitable for 15mm bore pipe or union in repair complete all as specified.

Taking up or down steel tubing and connections of 15mm bore in pipe, including cleaning for re-fixing or removal from site complete all as specified

Taking up or down steel tubing and connections of 20mm bore in pipe, including cleaning for re-fixing or removal from site complete all as specified

S&F GI tubing medium grade 15mm dia incl fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to exsiting surafaces of walls/ floor all as specified and directed .

Re-fixing old steel tubing 15 mm dia bore in open / connections in new or old positions, complete all as specified.

S&F GI tubing medium grade 20mm dia incl fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to exsiting surafaces of walls/ floor complete all as specified and directed .

Re-fixing old steel tubing 20 mm dia bore in open/c/onnections in new or old positions, C/omplete all as specified.

Supply, laying and testing CPVC SDR-11 water tubing of 16 mm outer dia medium grade including new GI fittings ISI marked i.e elbow, socket, plug, socket reducer, tee union, etc fixed to walls, laid in floors including cutting chases for concealed water tubing and making good in CM(1:3), cutting not exc 10 CM girth in brick wall/floor etc complete for the following bores :- (i) 20 mm bore

S&F PTMT grating openable 100mm dia size with/without hole including fixing with white cement complete all as specified.

S&F in repair wall brass cp mixer with Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed 15mm bore complete all as spd

S&F in repair fancy type, chromium plated Stop valves,of 15 mm bore cast Copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified

Supply & fixed in repair 75mm dia fancy type shower rose 30cm long CP brass pipe with swiwel joint in complete all as specified.

S&F in repairs PVC cabinet with looking mirror of size 350x450mm complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 mm th sheet glass shelf 12 cm wide with chromium plated guard and railing 60 cm long.complete all as specified

S&F in repair Soap dish PTMT , fixed to plugs with chromium plated brass screws.

S & F in repair chromium plated, towel rail, 20mm dia, D type, 60cm long between flanges.

S&F in repair for PVC connections 15mm size with PTMT nuts of length 450mm Complete all as spd

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe incl bedding in cement mortor to dwarf wall ot cantilever brackets and connecting union to pipe overall size 915x460mm, bowl size 410x 330x160mm incl all fittings ie CP waste coupling, waste pipe complete all as specified.

S&F in repair Plate rack made of stainless steel 1mm thick of size 900x600mm including shelves, racks dividing rods etc complete, Make : Nirali/Devidayal.

S&F in repair 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified.

S&F in repair 75mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls,complete all as specified.

S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof

S&F PVC (SWR) floor trap 75mm, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T 110mm), equal or unequal with access door complete all as specified and directed.

S & F PVC (SWR) junction single, (Single T 75mm), equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) bends, for 110mm bore pipes, with access doors, complete all as specified.

S&F PVC (SWR) bends, for 75mm bore pipes, with access doors,complete all as specified.

M&L for PVC(SWR) gully traps, 125/110mm setting and jointing to drains with CM 1:1 complete all as spd and directed.

Dismantling water tanks of capacity exc 250 & n.exc 500 ltrs and removing from site to store.

Dismantling water tanks of capacity exc 500 & n.exc 1000 ltrs and removing from site to store.

S&F Rotational moulded polythelene water storage tanks of 500 ltr capacity (cylindrical vertical with closed top) three layer hoisted and fixed in position all as specified and directed

Refixing of Rotational moulded polythelene water storage tanks of 500 ltr capacity (cylindrical vertical with closed top) three layer hoisted and fixed in position all as specified and directed

S&F Rotational moulded polythene water storage tank of 1000 ltr capacity triple layered (cylindrical vertical with closed top) hoisted and fixed in position on roofs complete all as specified

Refixing of Rotational moulded polythelene water storage tanks of 1000 ltr capacity (cylindrical vertical with closed top) three layer hoisted and fixed in position all as specified and directed

S&F in repair Ball valve of brass, 20mm bore, high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified.

S&F CI Gate valve, 20mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union s complete all as specified.

S&F CI Gate valve, 15mm bore, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union complete all as specified.

Taking down existing roof treatment over roof slab including wire brushing the surface to remove the loose concrete, dust and cleaning the surface complete all as specified and as directed.

M/L for rendering 15mm thick in cement mortar 1:4 on concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions on existing surfaces complete all as specified and directed. (Note- WPC shall be measured & paid separately under relevent item No of this Sch as supply only)

Supply only Integral water proofing compound

M&L for cleaning of roof slab surfaces including sweeping clean & washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed as under : (a) M&L preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.30 ltr/Sqm (b) M&L applying blown type bitumen @1.20Kg/Sqm of grade 85/25. (c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3mm thick of weight not less than 3.00kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required all complete all as specified and directed. (d) Applying two coats of aluminium paint @ 0.2 kg/sqm complete all as directed. Notes: (1) The work shall be executed through authorised appplicatot of manufacturer only. (2) Authorised Applicator shall be approved by GE before starting the work. (3) All materials shall be produced directly from manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Cgarge shall deface the original purchage vouchers. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water Proofing treatment for a period of Eight years i fevour of GE. A sum equivelent to 2.5% ( Two point five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor's dues as security deposite. The contractor may, however, furnish a fixed deposite receipt in lieu from a Schedule bank pledged in fevour of Garrison Engineer.

M&L 25 to 30 mm thick machine cut Kota stone flooring, laid over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finished, jointed and pointed with grey cement slurry mixed with pigments to match with the shade of Kota stone including rubbing and mirror polishing including old Kota stone complete all as specified and as directed.

All as per item No 112 here in before but as in raiser of steps, skirting/dado and pillar, laid over and including 15 mm thick rendering in cement mortar 1:4 including dismantling of old skirting/dado etc complete all as specified and as directed.

M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand:2 coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required, in panels with groove all around as per approved pattern including scrubbing and washing the top layer with wire brushes and water to expose the stone chippings complete all as specified and as directed. (Note: Payment for providing grooves shall be made separately under respective item of this Schedule)

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and as directed.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials outside MOD land (As approved by local Municipal Authorities) by manual/mechanical means including loading, tMRnsporting and unloading the same complete all as specified and as directed.

SABHARWAL CONSTRUCTION CO.

R K Enterprises

friends associeates

VIJAY KUMAR GUPTA

MAA SANTOSHI ENTERPRISES

R R Associates