AREA DEVELOPMENT, ARBORICULTURE AND ALLIED FACILITIES IN NEWLY ACQUIRED LADN FROM CHENNAI PORT TRUST IN BOAT BASIN AREA AT TIMBER POND CHENNAI UNDER GE(I) CG CHENNAI

Amount

Supply and Planting for Korean grass carpet by piece turfing including preparation of earth to required depth using pesticides and manures including one year of maintenance period from date of completion as per policy complete all as specified and as directed.

Supply only Neem cake in sacks all as specified and as directed.

Supply and fix GI steel water tubing of bore 20 mm, medium grade, ISI marked including all fittings such as bends, elbows, tees, short pieces, connectors back nuts, diminishing piece, caps plugs and unions etc laid complete laid in floors / fixed to wall and ceiling complete all as specified and as directed. Make:Tata/Jindal/Prakash Surya

Supply and fix Gun metal globe or gate valve of 25 mm dia with iron wheel head ,screwed both ends for iron pipe with neceesary fixing arragenements and including removing old one and taken as credit complete all as specified and as directed .

Supply and spread dry gober manure mixed with requisite quantity of pesticides and filled along with the garden soil in alternate layers complete all as specified and as directed.Note: Stack measurements shall be considered for payment.

Supply and planting Fox tail palm tree of height 8 feet to 12 feet by digging pit of size 450 x 450 x 600mm and filling soil obtained from same location upto 450mm and balance depth filled with garden soil and manure mixed in the required proportion and planting hedges of height 300mm above GL and removal of soil, debris, weeds to a distance exc 250m and n.exc 500m and watering etc complete all as specified and as directed by the Engineer-in-Charge

Excavating in post holes each n.exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 CM in soft/loose soil including removal of soil to a distance not exceeding 50m and making good the surface complete all as specified and as directed.

Supply and fix in stainless steel (Grade 316) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all complete all as specified and as directed.

Supply and fix 50 mm dia medium grade galvanised steel tubing including all GI fittings such as bends for making railing complete in walls, ceiling or laid in floor complete all as specified and as directed.

Supply and fix 32 mm dia medium grade galvanised steel tubing including all GI fittings such as bends for making railing complete in walls, ceiling or laid in floor complete all as specified and as directed.

Supply and fix 25 mm dia medium grade galvanised steel tubing including all GI fittings such as bends for making railing complete in walls, ceiling or laid in floor complete all as specified and as directed.

Supply and fix for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachments for base plates of railing complete complete all as specified and as directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in loose/soft soil complete all as specified and as directed

Material and labour for hardcore of guage n.exc 63mm, broken stone aggregate deposited, spread & leveled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for Plain Cement Concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate ) 100 mm thick in sub base floors complete all as specified and as directed.

Material and labour for Chequerred cement concrete tiles of size 300 mmx300mm x25 mm thick with rubber moulded in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface and including 20 mm thick screen bed in cement mortar 1:6 complete all as specified and as directed.

M&L for Plain cement concrete Type B2 1:2:4 (20mm garded aggregates) in foundation walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed.

M&L for Stone kerb of roughly squared Granite of trap stones of size 20cm x 30cm, dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush all as specified and as directed.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in hard/dense soil complete all as specifed and as directed.

Material and Labour for Steel formwork to sides of concrete foundations, footings, bases of column, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or batter in flat with rough finished surfaces complete all as specified and as directed

Material and Labour for Steel formwork to sides of pillars, posts, struts, columns and stanchions in circular on plan for fair finished surfaces of concrete complete all as specifed and as directed

Material and labour for Plain cement concrete 1:4:8, type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

Material and labour for RCC B-1 1:2:4 (using 20 mm graded aggregate ) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed

Material and labour for RCC B-1 1:2:4 (using 20 mm graded aggregate ) as in column pillars, piers, post and struts complete all as specified and as directed

Material and labour for Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required,including cranking,bending,spirally for hooping for columns ,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed

Material and labour for Mild steel TMT bars 5 mm dia and over upto and including 10 mm in stirrups spacers and binders , cut to length, bent to shape required,including cranking,bending,spirally for hooping for columns ,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed

Returning,filling in trenches including spreading,levelling ,watering and well ramming in layers not exc 25 cm thick with soil complete all as specified and as directed.

Removing excavated soil n exc 50 m and depositing where directed at a level n exc.1.5 m above the starting point complete all as specified and as directed.

Material and labour for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Rendering in CM 1:6, ,15 mm thick on fair faces of brick work surfaces and mixed with WPC as per manufacuture instructions,finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid separtely

Supply only Liquid Water Proofing Compound . Make of water proofing compound : Impermo/Roff/Cico

M&L Granite of 20 mm thickness (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over & including 12mm thick screed in cement mortar (1:4) with pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting, polishing and rubbing complete all as specified.

M&L Granite of 20 mm thickness (of any type) tiles machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite including cutting, polishing and rubbing complete all as specified.

S&F for Stainless steel letters of size not less than 300mm height bright finish both Hindi and English language including all fitting and fixtures like screws, glue etc. complete all as specified and as directed

Material and labour for Plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) in foundation walls or retaining walls , any thickness size or shape including pilasters, buttresses, column pillars boundry pillars and posts complete all as specified and as directed.

Material and labour for SS work for sign board of size 1.50mX1.200m, made out of stainless steel sheet 2.24mm thick, cut to size incuding writitng letters and welding to join the sheet with SS steel square bars 25X25mm bars on all sides, top and bottom with screw end to faciliate hanging of SS steel Sheet using bolts,nuts and washers, arrangmenet on 2 Nos SS tubing post 32mm dia medium grade 1.80 mtr high from top of PCC base and grouting to cement concrete 1:3:6 (40mm grade stone aggregate) size of base not less than 1400X450X15mm, drilling holes into SS tube pipe for screwing bolts nuts and washers complete all as specified and as directed. (Note: Board Background should be blue and letters are white with specified height and width) complete all as specified and as directed.

Material and labour for Preparation of old surface of wall including pilasters and cornice etc and apply two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surfaces complete all as specified and as directed.

Preparation of new steel or iron surfaces as of any description over 10 cm in width or girth not otherwise described and applying two coats of Anti-corrosion paint over a coat of Zinc oxide primer complete all as specified and as directed.

Preparation of new steel or iron surfaces as of any description under 10 cm in width or girth not otherwise described and applying two coats of Anti-corrosion paint over a coat of Zinc oxide primer complete all as specified and as directed.

M & L for Preparation of New concrete / brickwork surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel painting over a coat of primer complete all as specified and as directed.

Preparation of old painted steel or iron surfaces as of any description over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply and spread clean M sand in trenches including levelling, punning for cushioning of cables complete all as specified and as directed. Note : Punned thickness of sand cushioning only shall be measured and paid.

Supply and lay Fly Ash bricks of size 230 mm x115 mm x75 mm ,75 kg/sqcm in layers perpendicular to the axis of UG cable for protection of cable complete all as specified and as directed.

Material and labour for Plain cement concrete 1:3:6 using 20 mm graded stone aggregate for foundation/coping of poles including necessary form work and finishing the exposed concrete surfaces even and fair including demolition of existing PCC Foundation and removal of debris off the site complete all as specified and as directed.

Supply and laying of High density polyethylene pipe (HDPE pipe) of pressure rating ot 6 kgf/cm2 laid in trench of 40 mm bore for cable protection passing under Road/floor or for fixing to poles complete all as specified and as directed.

Supply, lay and test LT UG cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 4 core 10 sq mm complete all as specified and as directed. (Note : Make of cable : Havells/Gloster/Polycab/CCI). Note:Earth work and excavation ,sand filling , cable protection etc shall be measured and paid seperatel

Supply, lay and test LT UG cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 2 core 6 sq mm complete all as specified and as directed. (Note : Make of cable : Havells/Gloster/Polycab/CCI). Note:Earth work and excavation ,sand filling , cable protection etc shall be measured and paid seperatel

Supply and fixing pole mounting junction box (loopin box) for street light for 3 Phase 4 wire system with internal size 139X119X70 mm comprising of PVC conncector and one MCB SP 6 Amps including mounting arrangement complete all as specified and as directed. Make: Sintex/Hansel/Spelsbary.

Supply, install,testing and commissioning of 9W new generation energy saving envirmental friendly, long life aesthetically designed aluminium (non corrosive) landscape luminaire for diffused lighting with high power LED Bollard as light sources complete all as specified and as directed.

Supply,install, testing of LT Bus Bar chamber outdoor type 440 Volts, 3 Phase,4 wire,50 cycles per second, AC Supply comprising of 200 Amps capacity aluminium bus bar for the 3 Phase and neutral both side opening alongwith locking arrangements rainguard canopy system with suitable angle iron. Total Size 45cmX30cmX15cm including PCC work for ground mounting all as specified and as directed.

Supply and fixing LED flood light 70 Watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection with impact and corrosion resistant complete with driver and lamp complete all as specifed and as driected.

JANANIKARTHIK ENTERPRISES