REPAIR REPLACEMENT OF DOORS WINDOWS TILING PLASTERING CEILING ROOFING TO CERTAIN BLDGS UNDER AGE B R I OF GE AF ADM AREA KHERIA AGRA

Amount

S&F steel water tubes, galvanised, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors of 15 mm bore including taking down old pipe complete all as specified and directed.

S&F steel water tubes, galvanised, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm bore including taking down old pipe complete all as specified and directed.

Taking down & refixing of old steel water tubing and connections with providing new GI fittings in new or old position (walls, ceilings, floors, etc) of 15 mm bore complete all as specified and directed.

Taking down & refixing of old steel water tubing and connections with providing new GI fittings in new or old position (walls, ceilings, floors, etc) of 20 mm bore complete all as specified and directed.

Taking down chowkats with shutters (without taking down of shutter from the frames) exc 1.50 sqm and n.exc 4.00 sqm each.

Taking down chowkats with shutters (without taking down of shutter from the frames) n.exc 1.50 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1.00 Sqm and n.exc 2 sqm each complete all as specified and directed.

Taking down shutter of any description n. exc 1.00 Sqm complete all as specified and directed.

Refixing shutter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.

Refixing Shutter of any description n exc 1 sqm each complete all as specified and directed.

M&L for resecuring or easing & adjusting without taking down of shutters of any description n.exc 1 sqm each complete all as specified and directed.

M&L for resecuring or easing & adjusting without taking down of shutters of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed.

S&F solid PVC door frames of size 50mm x 47mm made out of 5mm plain cover fillet colour PVC sheet reinforced with MS square tube for toilet complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails, M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either toside and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in M.S frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement. Supplying and fixing in the frame at site as specified of drawing all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe-290 (Gde E165) complete all as specified and directed.

Supply and fix well-seasoned second class hard wood (Sal, Bijasal, Hollock) plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 35mm thick skelton/ gauzed door shutter factory made open rebated and prepared to receive glass gauged etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a), supplied and fitted to chowkats all as specified and directed.

S&F 35mm thick factory made 2nd class hard wood plain framed pannelled shutter (two panel) with lock rail and panel of 12mm veneered board particle board of exterior grade with commercial veneering on both faces. The size of rail and style as per IS-1003 complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 19 mm thick block boards grade 1 quality, exterior grade decorative type with decorative face veneers on one face including fixing in wooden frame work or chowkhats complete all as specified and directed.

S&F 30 mm width continuous (piono) hinges mild steel bright finish or electrogalvanised complete all as specified and directed.

S&F 2nd class hard wood 30 mm thick glazed and skeleton shutters for windows/ ventilators, open rebated and prepared to receive glass, gauge, divided in to square, with plain chamfered or rounded, mitered and rebated sash bars any number etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,sizes of members of shutters as specified in SSR part I, Section 8, clause 8.24 (b),fitted to chowkat complete all as specified and directed.

S&F 100 mm size butt hinges stainless steel medium weight complete all as specified and directed.

S&F 75 mm size butt hinges stainless steel medium weight complete all as specified and directed.

S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 150mm size aluminium anodised alloy handles fabricated type complete all as specified and directed.

S&F 100 mm long aluminium handles cast type anodised complete all as specified and directed.

S&F 100 mm long aluminium anodised barrel tower bold of exturded section complete all as specified and directed.

S&F 300mm long mild steel, sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed.

Material and labour for 2nd class hard wood fillets square, rectangular or tringular in section clean sawn screwed with nails exc 6 sqcm and n.exc 13 sqcm including taking down of old fillts and two coats of synthetic enemal paint over a coat of pink primer complete all as specified and directed.

S&F in repair 3 mm thick sheet glass , ordinary quality and glzing with oil putty in square n.exc 0.5 sqm in each pane including removing of old broken glass complete all as specified and directed.

S&F 3 mm thick sheet glass , ordinary quality and glzing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L for prepration of new wood surface over 10 cm girth or width and applying two coats of synthetic enemal paint over a coat of pink primer complete all as specified and directed.

S&F steel window with frame having two rebete with glazed shutters and fly proofing shutters including guard bars 10 mm MS square bar, 110 mm C/C complete all as specified and directed.

M&L for preparation of new steel surface over 10cm girth or width and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for brick work with subclass 'B' bricks straight or curved on plan exc 6 m mean radious, built in CM (1:6) including demolition of old brick work complete all as specified and directed.

Taking down cement plaster on brick or stone or concrete surfaces of wall etc , icluding raking out joints , hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:4) finished surface should be even and smooth including WPC @2% by weight of cement complete all as specfied and directed.

M&L for rendering 10mm thick on concrete surfaces of ceiling with CM (1:4) and finished even and smooth without using extra cement complete all as specified and directed.

M&L for scraping out loose mortar/concrete by chiseling/wire broughing complete and applying rust removing solution (rebaklene solution) to exposed corroded reinforcement and applying a coat of epoxy primer (Nitozink primer from M/s Forsroc or equivalent as approved by GE) as per manufactures instruction providing and fixing of wire mesh of weight 2.5 Kg per Sqm and apply 25mm average thickness in CM (1:4) mixed with liquid integral water proofing compound (complast 'X' recommended by the manufacture with gunitting machine at a pressure not less than 5 Kg/Sqm finally rendering 10mm thick plaster in CM (1:4) using liquid integral water proofing compound (complast 'X' 421 i.e. from M/s Fosroc and nitobond AR from M/s Forsroc or equivalent as approved by GE) in the proportion recommended by the manufacturer complete all as specified and directed.

M&L for two coats of cement base paint after preparation of newly plastered surfaces of walls over a coat of alkali resistant cement primar of complete all as specified and directed.

M&L for two coats of distemper oil emulsion after preparation of newly plastered surfaces of wall over a coat of clear cholle primar including 1mm thick wall care putty complete all as specified and directed.

M&L for three coats of white wash on newly plastered surfaces of ceiling surfaces after preparation of surfaces complete all as specified and directed.

M&L for preparation of old treated wooden surfaces of any description exc. 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old treated steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for complete removal of existing treatment on wall and applying two coats of cement base paint complete all as specified and directed.

Material and labour for complete removal of existing treatment of wall surface and applying two coat of oil emulsion distemper over & including a coat of primer and 1 mm thick putty finish complete all as specified and directed.

S&F in repair 15mm dia centre hole basin mixer, chromium plated, fancy type complete all as specified and as directed . Make : Zim Cat part No 1522A or equivalent Mark/ Jaquar.

S&F in repair for vitreous china wash basin, white, flat back, size 580 X 450 mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets & waste coupling including 15 mm pillar tap cast copper alloy fancy type cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in rapair sink with drainage board made of stainless steel 1.00 mm thick kitchen with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair plate rack with racks and guard bars made out ot stainless steel minimum 1mm thick, over all size 900 mm x 750 mm and assembled with using brass nuts, bolts and washers complete all as specified and directed.

S&F in repair 15 mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F repair PVC bathroom cabinet with mirror of size 350 mm x450 mm complete all as specified and directed.

S&F in repair for brass chromium plated shower rose 125 mm size with swivel joint including fixing to 15mm dia steel pipe or union complete all as specified and directed.

S&F in repair for 10 Ltrs capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with all internal accessories and fixed to wall and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor complete all as specified and directed.

S&F repair for vitreous china squatting pan 'Orissa' pattern, size 580 mm x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe)including connection to trap, and to flushing pipe, anti-syphonage pipe etccomplete including making good to floors with PCC bedding (1:5:10) type E2 and connection to trap with cement mortar all as specified, and making good to floor including demilition of PCC / Lime concrete bedding existing pan complete as in repairs all as specified.

S&F repair for Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts,flush pipe) front or back inlet including connection to drain (or outgoing pipe) and to flushing pipe, etc and making good to floor complete all as specified and directed.

S&F in repair plastic water closet seat, white closed patern with flat bottom and cover and mild steelcromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair 15 mm bib tap, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair 15 mm bore stop valve fancy type chromium plated with long shank and cup cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed.

S&F repair for 20 mm stop valve, cast iron, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of 20mm bore of pipe complete all as specified and directed.

S&F in repair towel rail 450 mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats ( minimum weight 170 gms ) complete all as specified and directed.

S&F in repair 32mm bore PVC waste pipe for WHB or sink complete all as specified and directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size of pattern), including all fittings, heads shoes, bends swan-neck etc including cleaning or re-fixing or removal of store (measures over all as fixed along the centre line over fittings and accessories) complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls complete all as specified and directed.

S & F bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and directed.

M&L for 40 mm thick cement concrete type B1, 1:2:4 (20 mm graded stone aggregate) as in floor, laid in panels with & including 3 mm thick and 38 mm wide glass strip, finished the surface even and smooth with using extra cement including demolition of old cement concrete floor complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection/ paving etc, finished surface even and fair without using extra cement including demolition of old cement concrete complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick joint less (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:4, including dismantling of old tiles complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick joint less (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:4, including dismantling of existing floor tiles complete all as specified and directed.

M&L for glazed ceramic designed coloured tiles 300 x 450 mm x 7 mm thick on vertical surface such as dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:4 including dismantling of old tiles complete all as specified and directed.

M&L for 20-25 mm thick hand cut kota stone slab flooring or in trades of steps over 20mm thick screed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing rounding of edges and dismantling of old stone slab/ tiles complete all as specified and directed.

M&L for kota stone slab 18-20 mm thick as in riser of steps, skirting, dado & pillar over 10mm thick plaster in CM 1:4 & jointed with grey ce,ment slurry mixed with pigment to match the shade fo the slab including rubbing and polishing & rounding of edges and dismantling of old stone slab/ tiles complete all as specified and directed.

M&L for rubber moulded chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors including screed bed or bedding layer of cement mortar 1:4, 15 mm thick for laying floor finishes including dismantling of old tiles complete all as specified and directed.

M&L for 16-18 mm thick granite (any type) work (table rubbed and polished) as in skirting, dado, steps, pillars, jambs, cooking platform, window cills and like in cement mortar 1:4 including pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone over screed bed 15 mm thick in cement mortar 1 : 4 including dismantling old granite slabs complete all as specified and directed.

S&F in repair drapery rod fancy type, made out of 25mm dia MS pipe having wall thickness 0.63 mm bright finish, colour and pattern as approved by GE, over all dia 28-29 mm complete all as specified and directed. Make : Aerolux/MEC/Vista.

S&F mild steel prepainted brackets suitable to hold the drapery rod/ curton rod 25mm dia and fixed to wall (concrete/brick masonary) with the help of 3Nos 50mm long steel screws and rawl plug including drilling with electric drill and making good the disturbed surface complete all as specified and directed. Make Aerolux/MEC/Vista

S&F 18 mm thick Rajshree UPVC ply of grade 1 quality of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinate side top and bottom shevles inside the cabinet and shutter or drawer complete all as specified and directed.

S&F 18 mm thick Rajshree UPVC ply of grade 1 quality of both side prelaminated coloured fixed with screws, solvent cement/ adhesive to make kitchen cabinate and Cupboard side top and bottom shevles inside the cabinet and shutter or drawer complete all as specified and directed.

S&F 6 mm thick Rajshri UPVC ply of grade 1 quality of both side plain white colour fixed with screws solvent cement/adhesive to make kitchen cabinet and bed room cupboard shutter complete all as specified and directed.

S&F in repair PVC tank cover suitable for 500 Ltrs & 1000 Ltr capacity HDPE water storage tanks complete all as specified and directed.

S&F 500 Ltrs capacity rotational moulded polythelene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position including dismantling and removing of old water tank complete all as specified and directed.

S&F 1000 ltrs rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including flot valve including dismantling and removing of old water tank complete all as specified in SSR Part-I and directed.

M&L in repair for 60 mm thick machine pressed rubber moulded precast concrete M-35 interlocking colored paver block any shape and size conforming to IS-15658-2006 laid over & including 25 mm thick sand cushion and filling joints and dismantling of old tiles complete all as specified and as directed.

S&F powder coated GI grid false ceiling with T and angles fixed to wall and hanged to roof with 4mm GI suspenders including 4mm thick non asbestos fibre cement bldg disigner board conforming IS-14862 type B cat 3 of oceanic texture and ivory colour of size 595mm x 595mm etc including taking down complete all as specified and directed.

S&F in repair 6 mm thick asbestos cement, coorugated or semi corrugated as in roof, wall etc fixed with L-type or J-type or crancked hook bolts complete all as specified and directed.

S&F in repair asbestos cement two pieces adjustable plain wing ridge 6 mm thick fixed with L-type or J-type or crancked hook bolts complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws including dismantling of old sheets all as specified and directed.

S&F in repair Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for rolled mild steel section as in main and cross beams, hip and jack rafters, purlins or similar works posts where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of Fe 410-W Gde E-250) quality A including taking down complete all as specified and directed.

M&L for preparing old decorated surface of walls and applying one coat of cement base paint complete all as specified and directed.

S&F in repair 100 mm dia stainless steel grating complete all as specified and directed.

S&F in repair rubber beading 50 mm wide and 8mm thick fixed to wooden shutter/ aluminium shutter with nails/ screw etc complete all as specified and directed.

S&F stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securings ends of stays to wall or roof for 100mm bore pipe complete all as specified and directed.

S&F stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays. Including bolts & nuts & securings ends of stays to wall or roof for 75mm bore pipe complete all as specified and directed.

M&L for vitrified tiles of 8 to 10mm thick first quality (square / rectangular) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:4 and dismantling of old tiles complete all as specified and directed.

M&L for complete removal of existing treatment on old painted plastered or concrete surfaces and applying two coats of synthetic enamel paint on kerb stone in alternative colour complete all as specified and directed.

M&L for prepration of old painted plastered or concrete surfaces by scrubbing and applying one coat of synthetic enamel paint on kerb stone in alternative colour complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks of capacity 500/ 1000 litres capacity and from mouths of circulating pipes, and writing with synthetic ememal paint that "Tank Cleaned on with date" etc complete all as specified and directed.

POORAN SINGH AND CO.

Mohd Gulab Hussain

Manu Enterprises

Asha Construction

M/s K S Builders

M/s M S Sharma and Co.