Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.1 LAccepted-AOC 1ST FLOOR GURJEET MARKET DHANGU ROAD | L1 | Accepted-AOC Being lowest L1 | |
| 2 | L2₹33.8 L+₹91,827.50 (2.79%)Rejected-Finance VPO BAILLY TEH DALHOUSIE DISTT CHAMBA HP 176303 | DALHOUSIE | CHAMBA | HIMACHAL PRADESH | 176303 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹37.2 L+₹4.3 L (13.0%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹38.2 L+₹5.2 L (15.9%)Rejected-Finance NEAR CIVIL HOSPITAL VILLAGE PO CHOWARI DISTT CHAMBA HP | CHOWARI | CHAMBA | HIMACHAL PRADESH | 176302 | L4 | Rejected-Finance Other than lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
6 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PATHANKOT
GE (AF) PATHANKOT-145001
CERTAIN REPAIRS TO VARIOUS BUILDINGS, PETTY REPAIRS AND DAY TO DAY COMPLAINTS AT MOTITBBA, BAKROTA AND DAINKUND AT AIR FORCE STATION DALHOUSIE
2023_MES_594179_1
8422/GE/PAF-09/2023-24
Open Tender
Support/Maintenance Service
Item Rate
270 days
GE (AF) PATHANKOT
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) PATHANKOT
₹90,000
Yes
15 Jul 2023
9 May 2023
8 Jun 2023
9 May 2023
6 Jun 2023
23 May 2023
Amount
Easing of window shutters/CB (One unit shall comprise of one complete window/CB/Showcase irrespective of number of leaves) to ensure smooth closing/opening including tightening of hinges, adjustement of tower bolts, sliding bolt etc complete all as specified and directed by Engr-in-Charge.
All as per Srl Item No 1 above but door shutters complete all as specified and directed by Engr-in-Charge.
Easing of aluminium door/ shutters/CB (One unit shall comprise of one complete door/CB/Showcase irrespective of number of leaves) to ensure smooth closing/opening including tightening of hinges, adjustement of tower bolts, sliding bolt etc complete all as specified and directed by Engr-in-Charge.
Petty repair to PVC door shutters by making minor adjustment to hinges etc easing shutter incl taking down of shutter if required and refixing in same position including welding to angle iron chowkhats complete all as specified and directed by Engr-in-Charge.
Petty repair to Steel rolling shutters system of any size and any description including reparing of ball bearing, top cover, anchoring rod, hasp and staple, including necessary welding, grreesing etc and making the shutters complete serviceable all as per existing pattern complete all as specified and directed by Engr-in-Charge.
Welding in repairs not exceeding 2.5 cm in length & thickness of metal to be welded not exceeding 6 mm complete all as specified including material & labour complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair aluminium anodised barrel tower bolt 200 mm complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair Aluminium anodised, barrel tower bolts 150 mm long, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloycomplete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair 150mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair 100 mm MS butt hinges, medium weight cold rolled fixed with screws or welded on wooden or steel frame complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair 300 mm MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engr-in-Charge.
Supply and fixing 12 mm plywood, grade BWR type BB fixed with screw to timber frame work for shutter,shelves etc including removing old work from site any thickness complete all as specified and directed by Engr-in-Charge.
M&L19/20mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination as a cup board shelf/rack etc., fixed with screws to timber framed work including fixing arrangement complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair aluminum floor door stopper of size 75 mm with two rubber legs complete all as specified and directed by Engr-in-Charge.
M&L for 4 mm thick plain glass fixing and glazing with oil putty/nails wire including hacking out old broken glass in wooden/steel frame complete all as specified and directed by Engr-in-Charge.
M&L for 5.5 mm thick plain glass fixing and glazing with aluminium beading and rubber gasket including haking out old broken glass in aluminium door and window frame complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair galvanised mild steel wire cloth nominal dia of wire 0.56mm and average width of aperture 1.00mm in wooden/steel frame complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repairs for 25 mm dia drapery rod (decorated type) with PVC coating fixed in with side brackets (both side), shade as approved by GE complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair peg set of six made of powder coated steel complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repairs 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair door closer hydraulically regulated made up of aluminium extruded section body universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed by Engr-in-Charge.
Plastering in patches not exceeding 3 sqm in each patch, 15 mm thick in cement mortar 1:4, finished even and smooth (without using extra cement) including taking down plastering and three coats of cement base paint to match with existing surface finish complete all as specified and directed by Engr-in-Charge.
M&L for renewing of ceramic/glazed tiles 6 to 8 mm thick in patches with new tiles of same existing patterns and size, area not exc 5 Sqm incl removing and cleaning old tiles preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed by Engr-in-Charge.
M&L for repairing of RCC projections, chajjas , roofs, facia etc. in patches not exceeding 3 Sqm in each patch by necessary preparation i.e. scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, sufaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced with welded mesh of weight exc 2kg per sqmtr but n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor complete all as specified and directed by Engr-in-Charge.
Taking down steel water tubing and connections, cleaning and refixing old 15 mm bore steel tubing and connections in new or old position with walls , ceiling, floors , etc.complete all as specified and directed by Engr-in-Charge.
Taking down steel water tubing and connections, cleaning and refixing old 20 mm bore steel tubing and connections in new or old position with walls , ceiling, floors , etc.complete all as specified and directed by Engr-in-Charge.
Supply and fixing medium grade steel water tubing, 15 mm bore galvanised (including taking down) with all fittings such as Union , Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or laid in floors complete all as specified and directed by Engr-in-Charge.
Supply and fixing medium grade steel water tubing, 20 mm bore galvanised (including taking down) with all fittings such as Union , Tank nipple with tank fittings and socket, elbow, nipple etc. and fixed complete to walls or layed in floors complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair GI fittings such as; union, socket, Tee, elbow, nipple, plug, tank nipple, reducer of size 6" & 4" long, all fittings for 15 mm bore pipe complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair GI fittings such as; union, socket, Tee, elbow, nipple, plug, tank nipple, reducer of size 6" & 4" long, all fittings for 20 mm bore pipe complete all as specified and directed by Engr-in-Charge.
Removal of air lock, blocking in water pipes/bib taps/stop valve incl cleaning pipes as requried and as directed to ensure proper flow of water complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 gm) complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min wt 210 gm) complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repairs 20mm stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.
Cleaning of over head tank of any description and any capacity descaling, washing complete with soap solution and removing vegetation around the over head tank/plate form including opening and reconnecting with GI tubing as site requirement complete all as directed by Engineer-in-Charge.
Supply and fixing in repair PVC white low level flushing cistem 10ltrs capacity with all fittings syphonic action push stype with inlet ball valve and float incl PVC flush pipe, ball valve, handle, MS bracket etc complete all as specified and directed by Engr-in-Charge.
Petty repair to leaking flushing cistern low/high level, incl adjustment in the internal fitting repair to PVC bends pipe, flush pipe etc all as per directed by Engineer-in-Charge
Supply and fixing in repairs PVC flush pipe of 32 mm dia with two Nos check nuts for connecting low level flushing cistern to EWC complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repairs PVC syphon complete for low level flushing cistern complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repairs flush handle with adjustable lever and hook for low level flushing cistern complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair, viterous china squatting pan of pattern long pan, size 580x440mm, white with intergral footrest including 'P' or 'S' trap front and back inlet any pattern including provision of lime concrete bedding complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair vitreous china ware wash hand basin white flat back size 550mm x 400mm excl taps, waste chain and plug and porecelain stopper but incl bracket and cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repairs vitreous china wash down water closet (Pedested patern ) white incl fixing bolt, plastic water closet seat cover black/white closed pattern with flat bottom and cover and mild steel chromimum plated hinging device, fixed in repairs all as specified directed by Engr-in-Charge.
Supply and fixing in repair waste Coupling Suitable for Existing WHB/Sink complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repairs waste pipe suitable for Existing WHB/Sink/Urinal etc complete all as specified and directed by Engr-in-Charge.
Petty repair to stop leaking of PTMT Bib tap/ Pillar tap/Stop cock by suitable jumper washer and etc, complete all as specified and directed by Engr-in-Charge.
Petty repair to stop leaking of CP Brass Bib tap/ Pillar tap/Stop cock/ by suitable spindle and etc, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repairs for 15 mm bore bib taps of PTMT any colour high pressure screwed for iron pipe and fixed(Minimum weight 15mm-90 gms) complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair pillar tap, cast copper alloy, with capstan heads, 15mm bore dia of pipe chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair Hot and cold mixer fancy type single or double legged cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends iron pipe suitable for 15mm bore pipe fixed to wash hand basin complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair PVC connection, 60cm long, 15mm in size with PTMT nust and PVC washers at both ends complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair 15mm Angle/stop/gate valves, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle screwed at two right angles ends for both iron pipe complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair stop/gate valve,15 mm cast copper alloy chromium plated fancy type with long shank & cup (concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron fixed complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair brass chromium plated shower rose of 125mm size, with or without swivel joints including fixing to GI pipe complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair brass chhromium plated tubular tower rail 20mm dia , D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair Soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair Acrylic corner set of 3 pieces as per sample approved by Engr -in-charge all as specifed and directed.
Supply and fixing in repairs Chromium plated health faucet for EWC with 1 m long CP tube with CP wall hook superior quality complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair Toilet paper holder of Chromium plated fixed to walls with chromium plated (CP) brass screws,complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated hinging device, fixed in repairs all as specified and directed Engr-in-Charge.
Supply and fixing in repair Mild steel chromium plated flushing jet for padestal pattern WC 1000mm long tube superior quality including flexible pipe and brass chromium plated nuts complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair CP grating 125mm dia circular of approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified and directed by Engr-in-Charge.
Dismantling cast iron work of any description complete all as specified and directed by Engr-in-Charge.
Supply and fixing cast iron soil, waste and vent pipe of bore 100mm , sand cast type in any length with or without ears with cement joints fixed to wall including all fittings/fixtures complete all as specified and directed by Engr-in-Charge.
Supply and fixing cast iron soil, waste and vent pipe of bore 75mm , sand cast type in any length with or without ears with cement joints fixed to wall/laid in trenches including all fittings/fixtures complete all as specified and directed by Engr-in-Charge.
M&L CI floor trap with grating including grating, jointing to waste pipe, fixed in cement concerte type B1(1:2:4), dia of out let 75mm complete all as specified and directed by Engr-in-Charge.
Cleaning of floor trap and applying of cement around the floor trap with sealant compound for arresting the seepage all as specified and directed by Engr-in-Charge.
Supply and fixing in repair grating doom 125mm dia with waste hole of steel fixed on floor/nahani trap with cement mortar, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair stainless steel waste coupling for S.S Sink 32 mm to 40 mm dia set with rubber washer plug etc complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair rubber door seal 32mm wide and 900 mm long with Aluminium strip of size 19mm wide fixed with machine steel screw with washer, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair center hole basin mixer 15mm dia chromium plated brass with costed swinging spout including plugging and securing to walls, complete all as specified and directed by Engr-in-Charge.
Repair of leakage of Small fittings galvanized iron medium grade such as socket, elbow, nipple, for 15mm bore pipe complete all as specified and directed by Engr-in-Charge.
Repair of leakage of Small fittings galvanized iron medium grade such as socket, elbow, nipple, for 20mm bore pipe complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair Galvanised iron medium grade fittings as under suitable for 15mm bore pipe complete all as specified and directed by Engr-in-Charge:- (a) Union
Supply and fixing in repair Galvanised iron medium grade fittings as under suitable for 20mm bore pipe complete all as specified and directed by Engr-in-Charge:- (a) Union
Supply and fixing in repair extruded aluminum alloy handle, fabricated type, anodized 125mm size, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair Aluminum, anodized, barrel tower bolts of extruded section 100 mm long, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair Aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair Butt hinges medium weight, cold rolled mild steel 75mm size,with or without taking off shuttercomplete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair SS towel Rail 600mm long "D" type complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair Steel window handles left/right, and peg stay including welding to base plate, pin and handle/brackets complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair for pre-fabricated stainless steel plate rack made out of 1 mm thick stainless steel plate jointed with brass screws of size 600 x 750mmx 250mm complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair rotational moulded,minimum 3 layers HDPE water storage tank of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair rotational moulded,minimum 3 layers HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete all as specified including 02 Nos 20mm dia full threaded GI tank niple, 20 mm dia PTMT float valve epoxy coated Aluminium rod with high density plastic float ball( of minium weight 210 gms ) and refixing of inlet, outlet & overflow pipe etc, complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair single bowl sinks with drain board made of stainless steel 1mm thick kitchen with plugs, washers, including bedding in cement mortar or fixing cantilever bracket and connecting union to pipe, overall size 915mmX460mm bowl size 410mmX330mmX160mm complete all as specified and directed by Engr-in-Charge. Make:- Prayag or Nirali, Classic or equivalent
Supply and fixing in repair lock fixed to aluminum doors complete all as specified and directed by Engr-in-Charge.
M&L for refixing aluminium shutters of any description exceeding 1 Sqm and not exceeding 2.5 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repair for CP towel ring of standard quality complete all as specified and directed by Engr-in-Charge.
Supply and fixing PVC cabinate mirror coloured of size 350x450mm fixed with screw and PVC gutty on wall complete all as specified and directed by Engr-in-Charge.
Supply and fixing ply wood, 6mm thick, 5 ply, grade BWP, type BB, fixed with screws to timber frame work complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repairs PVC tank cover/lid for 500/1000 ltr over head tank complete all as specified and directed by Engr-in-Charge.
Supply and fixing ball bearing for rolling shutter incl taking out u/s ball bearing complete all as specified and directed by Engr-in-Charge.
Supply and fixing Springs for rolling shutter incl taking out u/s springs complete all as specified and directed by Engr-in-Charge.
Supply and fixing rubber gasket for fixing or securing glass pan or backelight sheet with aluminium door frame incld taking down complete all as specified and directed by Engr-in-Charge.
Supply and fixing continous (piano) hinges in repairs, mild steel , bright finish or electrogalvanised with width of flap 30mm complete all as specified and directed by Engr-in-Charge.
Supply and fixing in repairs 125 mm Hasp and staple, safety type, aluminium anodised hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge.
Dismantling of wall or ceiling boards (fibre,pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and directed by Engr-in-Charge.
Providing & fixing false ceiling at all heights with GRS (Glass Fiber Reinforced Gypsum) false ceiling tile of size 595X595 mm of approved texture ,design and pattern having moisture content less then 2 %, humidity resistance of 99%,NRCO .50 to 0.75 as per IS 8225 :1987, Noncmbustiible as per IS 476 (part 4)-1970 and light reflectance of 855 (minimum) to be laid in true horizontal level suspended on interlocking metel T grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @120 gms per sqm including both side) comprising of main T runners of size 15X32 mm length 3000mm ,cross T of size 15X32 mm of length 600mm to from grid module of size 600mm X600mm suspended from Ceiling using galvanised mild steel items (galvanizing @ 80 gms per sqm) i e 50mm long ,8mm outer dia M-6 hanger rod upto 1000mm length and L shape level adjuster of size 85X25X2mm galvanised iron perimeter wall angle of size 24X24X0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plug at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications ,drawing and as per direction of the Engr- in Charge.
M&L in repairs 30 mm thick 2nd Class soft Wood bording in floor and skirting one side planed with butt joints and fixed with nails suppled and fixed in repair complete all as specified and directed by Engr-in-Charge.
Preparation ofold wooden surface of any description, not otherwise described and two coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
Preparation of new wooden surface of any description, not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.
Supply and laying of CPVC Pipes of outer dia of 20mm SDR 11 & Plain CPVC SDR11 fittings in trenches complete all as specified and directed by Engr-in-Charge.
Supply and laying of CPVC Pipes of outer dia of 16mm SDR 11 & Plain CPVC SDR11 fittings on wall/ceiling or laying in floors complete all as specified and directed by Engr-in-Charge.
Supply and laying of CPVC Pipes of outer dia of 20mm SDR 11 &Plain CPVC SDR11 fittings on wall/ceiling or laying in floors complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster on brick wall upto any height(max of triple storey) and ceilings including raking out joints hacking for key srcubbing down with water complete all as specified and directed by Engr-in-Charge.
M&L15mm thick rendering in cement mortar 1:6 on fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed by Engr-in-Charge.
M&L15mm thick rendering in cement mortar 1:4 on fair faces of brick work surace rendering is to be even and smooth with out using extra cenent complete all as specified and directed by Engr-in-Charge.
M&L 5 mm thick cement plaster in cement mortar 1:3 on celling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
Preparation new surface of wall and applying two coat of oil emulsion distemper over a coat of 3 mm thick wall putty complete all as specified and directed by Engr-in-Charge.
Preparation of new plastered surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/lit and UV resistance as per IS 15879;2004, Alkali and fungal resistance , dirt resistance exterior paint of requirede shade (Company Depot Tinted) with silicon additives @1.43lit/10sqm over and including priming coat of exterior primer [email protected]/10sqm over new surfaces complete all as specified and directed by Engr-in-Charge.
Prepration of new surfaces and apply three coats of white wash on newly plastered surfaces of ceiling including complete all as specified and directed by Engr-in-Charge.
Supplying and fixing of 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing all as specified by Engineer-in-charge
Supplying and fixing solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvant cement and fixing at site on PVC frame as per specification and drawing all as specified by Engineer-in-charge.
Roughning for old concrete surface/floor by picking, weeping clean and washing with down with water to remove dust including brushing neat cement slurry with 3.00 Kg of cement per sqm etc complete all as specified and directed by Engr-in-Charge.
M&L for PCC 1:2:4 type B-1 as roof padding concrete to bring the extg slab in slope of 1:40 complete all as specified and directed by Engr-in-Charge.
M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20kg per sqm incl cleaning surfaces complete all as specified and directed by Engr-in-Charge.
M&L for fixing APP based polymeric membrane minimum weighing 3.00 kg/sqm and min 3mm thick reinfirced with polyster non wove faric (wt not less than 150gms/sqm) land on primed surface by forced application complete all as specified and directed by Engr-in-Charge.
Dismantling floor hearth wall tiling (but not backing) removing servicable tiles to store rubbish off the premisses complete all as specified and directed by Engr-in-Charge.
M&L 15mm thick screed bed or bedding layer of cement mortar 1:6 to laying floor finish complete all as specified and directed by Engr-in-Charge.
M&L non skid ceramic colour tiles 7 to 8 mm thick joint free edge cut (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm(400mmx400mmx7 mm thick) set and jointed in neat cement slurry and pointed in colour cement to match as in floor complete all as specified and directed by Engr-in-Charge.
All as per ser item No 127 above but in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick complete all as specified and directed by Engr-in-Charge.
M&L vitrified ceramic tiles light shade10mm thick (square /rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in colour cement to match complete all as specified and directed by Engr-in-Charge.
All as per ser item No 130 above but in skirting and dado including rendering/screeding including cement mortar1:4 , 10mm thick complete all as specified and directed by Engr-in-Charge.
M&L glazed ceramic colour tiles 300mmx450mm/300mm x200mm x7mm thick set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as skirting/dado over cement mortar rendering/screding 10mm thick 1:4 complete all as specified and directed by Engr-in-Charge.
M&L for 20mm thick granite black slab, machine cut, well polished, bedded in 15mm thick in CM 1:4 as in cooking plaforms & like and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixtures of pigments to match the shade of granite stone including cutting and polishing etc complete all as specified and directed by Engr-in-Charge.
Dismantling plain corrugated asbestos /translucent sheet in roof covering incl redges complete all as specified and directed by Engr-in-Charge.
Supplying and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa and finishing with resin coat on both surfaces @ 150 gm/sqm of coating as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
Supplying and fixing Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
PCC 1:3:6 Type C-1 (using 20 mm graded aggregate as ) as in roof curves, mud stops rounded or chamfered on edge complete all as specified and directed by Engr-in-Charge.
Demolition of brick work built in Cement mortar including all quoins arches pillars etc complete all as specified and directed by Engr-in-Charge.
Brick work with sub class 'B' bricks in Cement mortar 1:6, straight or curved on plan exc 6 mtr nean radius, using old size bricks complete all as specified and directed by Engr-in-Charge.
Brick work with sub class 'B' bricks in Cement mortar1:6, straight or curved on plan exc 6 mtr mean radius, using old size bricks but except bricks complete all as specified and directed by Engr-in-Charge.
Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth complete all as specified and directed by Engr-in-Charge.
Taking down chowkhat or frame with shutters (with out taking off the shutter from the frame ) n. exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge.
All as per ser item No 141 above but exc 1.5 sqm but ont exc 4 Sqm each complete all as specified and directed by Engr-in-Charge.
Taking down shutter area exc 1 Sqm but not exc 2 sqm each complete all as specified and directed by Engr-in-Charge.
Taking down shutter and refixing after easing, adjusting area exc 1 Sqm but not exc 2 sqm each complete all as specified and directed by Engr-in-Charge.
Supply and fixing of PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS square tube, suppling and fixing in opening as per specification and drawing complete all as specified and directed by Engr-in-Charge.
Supply and fixing factory made solid panel pvc door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing complete all as specified and directed by Engr-in-Charge.
M&L for Ist class hard wood plain or solid straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered, put togather with glue pinned at joints complete all as specified and directed by Engr-in-Charge.
Supply and fixing 35 mm thick plain framed panelled shutters (two planel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of the rail and stile as per IS:1003(Part I), kiln sseasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.
Supply and fixing locally fabricated glazed and skelton shutters 35mm thick open rebated and prepared to receive glass,gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I, Section 8, Clause 8.24(a) complete all as specified and directed by Engr-in-Charge.
Supply and fixing steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60x25mmsingle rebated comprises gauged skelton shutter ERW sec 50x20mm and 1mm thick with two open able leaf consisting two Nos sash bars of T section 20x3mm completed welded to frame with one vertical mullion of ERW box type T section of size 60x25mm and 1.25mm thick incl cutting holes and making good dismantled portion PCC 1:2:4 type B1 four Nos for each window incl following fittings weld to frame shutter (a) hold fast, 150mm long of 12mmx3mm made to shape-04 Nos per window (b) handle of Z sction 20x25mm, 100mm long 01 Nos per leaf (c) MS Tower bolt 150mm long of 12x3mm made to shape-04 Nos per window (b) handle of Z section 20x25mm, 100 long stoper-01 No per leaf () MS pintal of hinges of size 75mmx12mm-02 Nos per leaf (g) fabrication & fixing arrangement as per Drg No. CEJZ/TD-06-07 , Note : wire mesh and painting shall be measured and paid separately under appropriate item complete all as specified and directed by Engr-in-Charge.
All as per item No 154 above but with glazed shutter complete all as specified and directed by Engr-in-Charge.
Supply and fixingFramed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge.
Supply and fixing Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engr-in-Charge.
Supply and fixing aluminum frame powder coated for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed by Engr-in-Charge.
Supply and fixing any colour, aluminum door shutters powder coated , aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber neoprene packing, handles 02 Nos in each door, hinges, anodised aluminium snap beading, screws etc complete all as specified and directed by Engr-in-Charge.
Supply and fixing any colour, aluminum window and ventilator shutters, powder coated side hung type with sash bars, aluminium section weighing 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc complete all as specified and directed by Engr-in-Charge.
Supply and fixing anodised aluminium grills (anodised transparent or dyed to required shade according to IS:1868 with anodic coating grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre, including cuttung the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all as per requirement and direction of Engineer-in-Charge.
Supply and fixing galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-Charge.
Supply & fix sheet glass ordinary quality 3mm thick n, exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge.
Supply & fix tinted glass ordinary quality 5.5mm thick n, exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge.
Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
Dismantling Timber scantling 40 sqcm over in section in any description complete all as specified and directed by Engr-in-Charge.
Supply and fixing Rolled mild steel section as in joist, chanel, angle, or tee section fixed independently without connecting plates, etc (cut to ordinary length i,e within 20mm of the length indicated) of Fe-410w(Gde-E-250) quality A complete all as specified and directed by Engr-in-Charge.
Supply and fixing Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting platesf Fe-410w(Gde-E-250) quality A complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete 1:3:6 Type C-2 as in foundations filling and mass concrete complete all as specified and directed by Engr-in-Charge.
Demolition of cement Concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) or as in sunken complete all as specified and directed by Engr-in-Charge.
M & L PCC 1:3:6, type C-2, 50mm thick as in plinth protection, Surface finished fair and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. Note for Srl item No 1 to 107. The bidder shall note that the Contractor or his authorized supervisor will attend the office of Engr-In-Charge daily at 0900 hrs receive the complaints with adequate number of persons to attend the complaints. In case the contractor or his authorized supervisor fails to attend the office of the Engrs-In-Charge as per time frame given in here-in-before, recovery shall be made @500/ per day.
Havish Construction
M/s. Rishav Sood
m/S Varun Gupta
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .