Remodeling of Board Room and Directors Lobby in CCE Building

Amount

Civil Works

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within ACTREC Campus.

FLOORING BREAKING: Dismantling carefully the existing serviceable tiles/slabs/clay tiles/Marble slab/granite slab/Kota stone/tandoor stone/Shahabad stone and all types of flooring in flooring etc. including removing the 20mm thick bedding of cement mortar stone grit or brick bat coba etc. at all floors & levels including stacking of serviceable material out of hospital premises as directed by the Engineer-in-Charge.

Demolishing brick work/blockwork and plaster manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material outside ACTREC campus as per direction of Engineer-in-charge.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in campus and waste material outside ACTREC as directed by Engineer-in-charge.

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18mm

Providing and fixing Sun control film

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing 12 mm thick toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings with aluminium powder coated (min 50 microns) frames with frame size of 50mmx75mm, glass to be mounted in frames section with with silicone gasket, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately).

Providing and fixing of 2 sided double bolted Door handles, morties lock and stoppers etc

Supply and Fixing of 35 wooden door (Georgian style) with 8-12mm thick Toughened Glass with designer etching including providing and fixing top & bottom pivot & floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge. The glass shall be fitted with size and location as per the drawing. (Door handle size 600mm Center to Center, lock and stopper etc. included in the item rate). as approved by Architect using sleek anodised alumnium section (anodising of approved colour) with complete glass of maximum dimension 3m or as per drawing. The Fixed glass to be fixed using approved Profiles of aluminium at Top & Bottom & at sides (the profile to shared for approval). The profile of lipping and moulding shall be of suitable size for glass frame and wherever required as per the architect design. The door shall be completely PU/epoxy painted for seamless finish of approved colour. All complete as per the instructions of Engineer incharge.

Providing and laying Glazed vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 800 x 1200 mm

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1 mm thick

Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows.Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Marine plywood conforming to IS: 710. Pelmet works if required of plywood will be included in the measurement

Wall painting with Luster or high grade Acrylic emulsion such as Royale Aspira, Royale Health Shield, Apcolite premium, Easy Clean Berger or Silk Breath Easy etc.. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. 2 coats with 2 coats of primer

Chairs

Revolving type chair with wheels : SEAT ASSEMBLY :- The Cushioned seat is made of Injection moulded Plastic outer & inner. Plastic Inner is upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m³ and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression * Seat Size : 47.0 cm (W) x 48.0 cm (D) BACK ASSEMBLY :- The Cushioned back is made of PU Foam with insitu moulded MS moulded E.R.W.Round Tube of size 1.9 ± 0.03 Cm x 0.16 ± 0.0128cm. It upholstered with leatherette. *MID BACK SIZE :- 47.7 cm (W) x 60.1 cm (D) ARMRESTS :- The armrest top is moulded from Polyurethane (PU) and mounted on to a drop lift adjustable type tubular armrest support made of Ø 3.81 ± 0.03 cm x 0.2 ± 0.01cm thk M.S.E.R.W tube having chrome plated finish . The armrest height adjustable up to 6.5 ± 0.5cm in 5 steps. SEAT DEPTH ADJUSTMENT :- Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0 ± 0.5 cm . ADJUSTABLE BACK SUPPORT :- Back frame is connected to the Up/ Dn mechanism housed in plastic T Spine .It can be adjusted in the range of 7.42 ± 0.5 cm for the comfortable back support to suit individual need . ACTIVE BIO -SYNCHRO MECHANISM :- The adjustable tilting mechanism is designed with the following features : - • 360 ° revolving type . DJUSTMENT :- The pneumatic height. adjustment has an adjustment stroke of 10.0 ± 0.3 cm .

Revolving type chair with wheels: SEAT/BACK ASSEMBLY :- The seat & backis made up of 1.2±0.1 cm thk. Hot pressed plywood measured as per QA method described in QCP-OLTA-PL14-18: upholstered with synthetic leather over moduled High Resilience Polyurethane foam. • High Back Size : 51.8 cm (W) X 75.2cm (H) • Seat Size : 49.0 cm (W) x 48.8 cm (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM :- The HR Polyurethane foam is moduled with density =55+/-2 kg/m³ and hardness load 16 ± 2 kgf as IS:7888 for 25% compression. ARMRESTS :- The adjustable armrest is designed with the following features • UP- Down Adjustment- 8 steps (8.0 ± 0.5cm range ) • Height adjustable armrest structure which is chrome plated and fitted with an armrest top • Fixed armrests top is PU moulded over metal insert. BACK HEIGHT ADJUSTIBALITY : - Back can be adjusted in 5 positions by manually .Stroke of height adjustable spine is 7cm. Back height adjustability is applicable for High back & Mid Back chairs . PNEUMATIC HEIGHT ADJUSTMENT :- The pneumatic height. adjustment has an adjustment stroke of 10.0 ± 0.3 cm .

Table size of 1200*600. 18mm marine plywood prelaminated with 0.8mm approved laminated mounted on MS powder-coated structure of size 50*50 of 1.6mm thickness. The table models to be pre approved in design pattern.

Providing & fixing cabinet made up of 18 mm. Commercial ply of approved make for top, bottom, sides & shelves & 8mm commercial ply approved make for back side Door shutter made up of 19mm thick commercial ply and outer surfaces and top of shelves for open type cabine should be laminated with 1 mm thick approved wood laminate sheet of required colour including all SS fittings such as hinges, tower bolts, ball catches, stopper, handle, knobs as per shown in drawing or approved by Engineer-In-Charge etc.and all exposed edges lipping with 6mm Thick T.W. lipping patti.locking arrangement. all complete as specified & directed by Engineer-In-Charge. with shutter of same laminate and inside with 0.8 white laminate. with granite top

Puzzled photo of different photo frames and sizes as per instruction and approval of engineer in charge as per 3D image. Each set will have 8 frames of different sizes but the overall size puzzled frame size should not exceed 6ft x 4 ft

Providing and fixing Artifical grass with recommen ded adhesive of approved quality which have 100% washable, peel proof. The grass should give a seamless finish. Including Cost of preparation on the base surface for fixing the grass as per the manufacturer specification, complete in all respect as per direction of EIC.

Providing and fixing of 12mm Rug carpet in roll form to be installed with required OEM specification glues and cleanable with vaccum

Providing and fixing of Aluminium pipe of size 100mm x 50mm with a thickness of 2mm having pre wood finished with not less than 50 microns wood grain Anodizing should be erected as vertical pillar as shown in pillar. The pillar shall be fixed on the ceiling with L-bracket/Cleats and on the floor should embeded by cutting tiles inserting the section below and finishing the surface as per the instruction of Engineer incharge.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 4 mm thick glass pane (weight not less than 10 kg/sqm).

Providing and fixing of Planter boxes made out of 12mm thick plywood with 1mm thick laminate of approved colour and inside laminate is of 0.8 with Original plants and pots approved by engineer In charge.as per the drawing given in the tender. Fixing as per the instruction of Engineer incharge.

Providing & fixing on Acrylic Signages as per approval of EIC

Providing & fixing of logo backprinted on 8mm Acrylic sheet cu in circular shape of DIA 600mm mounted on SS studs as per approval of EIC

Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) design CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant. all complete as per direction of Engineer-In- Charge.

Photo frames of 900x900 mm for photo frame wall

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness60 microns (minimum), including factory painted after bending and perforation and backed with a black Glass fiber acoustical fleece.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

Removing existing false ceiling of any material and any size with all necessaryallied works, removing out debris out of TMH premises as directed by Engg-incharge.

Providing and and fixing Stone table with moulded edges as shown in 3D image. Of size 6ft x 3ft of height 3.5 ft

Supply & Fixing of following sizes of double door /recess type metal cladtriple pole and neutral distribution board with MCBs of 6 to 32 Amp per waycomplete with incoming MCB conforming with relevant specs.& drawings.

8 way TPN Distribution board with 40Amp/63 AMP MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways/phase (24 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-MCBDB.

Providing and fixing 63 A MCB type Isolator with enclosure Supplying, erecting & marking FP MCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB

Supplying, erecting & marking DP MCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB 5-3-9 Supplying, erecting & marking

Supplying, erecting & commissioning 2 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB.

Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB

MAIN & SUB MAIN CABLES/WIRING

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 35 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

SITC of Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduit Heavy(HMS) as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire from main distribution board to power point circuits and lighting switchboard.

SITC of Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduit Heavy(HMS) as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire from main distribution board to power point circuits and lighting switchboard.

Point wiring

SITC of Primary point wiring for light point/ fan point/ exhaust fan point/ call bell point with 2 x 1.5sqmm + 1 x 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed including medium class PVC conduit Heavy(HMS) / casing capping , with modular switch , modular plate, suitable GI box for concealled , suitable PVC box for surface , ceiling fan rose , PVC junction box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (Average circuit lenght 20 mtr)

SITC Secondary point wiring light to light looping with 2 x 1.5sqmm + 1 x 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface / recessed including medium class PVC conduit Heavy(HMS) / casing capping , with modular switch, modular plate, suitable GI box for concealled , suitable PVC box for surface , ceiling fan rose , PVC junction box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. ( Average circuit length 10 Mtr )

POWER POINTS WITH WIRING

Supplying and fixing following size/ modules, PVC / GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

3 Module

6 Module

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Modular switch 6A/16A

Modular Socket 6A/16A

Lighting

Supply,Erection, Testing and Commissioning of LED 15 watt to 18 watts recessed / surface mounting down light fitting with all accessories and interconnecting with 3 R 1.5 sqmm PVC insulated FRLS copper wire Make: Philips, other branded first class companies preferred.

Supply,Erection, Testing and Commissioning of single 3W Recessed fixed type LED fitting with Electronics ballast and all accessories and interconnecting with 3 core 1.5 sqmm PVC insulated FRLS copper wire and fixing the same in the Ceiling.

SITC of LED strip / rope lights 10watt to 15watt per meter, colour temp as directed by EIC ES LED Strip Light - 22 W - 2700 K - 60- 90 LED Density Per meter

LED strip light drivers 6A to 10A as directed by EIS ES

SITC of alluminium profile housing for LED strip lights as directed by EIC ES

LED COB Light - 15 W - 2700 K

TELEPHONE & LAN WIRING

SITC of CAT 6 LAN cable for DATA including 25mm PVC Conduit Supply ,Installation,Testing & Commisioning of of UTP 23 AWG 4 pair CAT 6 LAN Cable to TIA/ EIA 568 B.2.1.in the surface/ recessed steel/ PVC conduit as required. For telephone

Supply,Fixing, Testing and Commissioning of Information Outlet for Cat-6 UTP cable quader front plate with Back box and all accessories as required. RJ 45

Providing and fixing coving light

Other items

Chandlier lights as shown in 3D image or similar in design as per approval of of EIC

Wall-mounted clock of size 4 ft dia as marked in 3 D drawing

Fire Detection System

Supplying, installing, testing and commissioning FRLS, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, installing, testing and commissioning of Addressable Optical Photo Smoke Detector. The detector shall have multi co-operative sensing technology for faster response & avoid false alarms. The detector shall have single/twin bi-colour LED for 360 deg viewing. The detector is conforming to IS 2189: 2008, 11360_1985_Reff2020_EN 54 /VdS / UL & FM approved with 3 years equipment replacement warranty, Designed to meet UL268, 7th Edition. FF- AFAS/SD.

Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI

Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories, Module shall conform to EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/MCP.

SITC of integration of new system with existing BOSCH make fire alarm system

Supply,Installation,Testing & commissioning of Round cassette AC as per below Specification

Capacity: 1.5 ton Star rating: 5 star Technology:- Invertor Coil material (Evaporator & Condenser): Copper Classification by function: Cooling only Refrigerant: Ecofriendly Power Suppy: Single phase, 50 Hz Drain pump: Inbuild drain pump suitable for continuous operation with integrated float switch and capable of lifting condensate water to a height of at least 5 meters.

Additional Accessories required for Installation (Including installation)

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories,insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastomeric nitrile rubber with GC cloth tubular sleeves sections of specified thickness as given below for Suction and Liquidlines, all accessories as per specifications etc. Note:- individual piping will not be measured All pipe should be laid in ladder/perforated type tray. External pipe should be cover with GI caping cable tray.

Copper Pipe with Insulation sleeve (in pair) 5/8''(suction line), 3/8'' (Discharge line) or as per OEM standards.

Supply, laying & termination of copper cable from Departmental power supply to IDU & between IDU and ODU unit. Complete with lug fitting, ferruling, gland fitting etc. All Cable should be laid in GI cable tray.

Flexible Copper Cable 3C x 2.5 sqmm

Supply, Installation, Testing and commissioning of PVC (minimum 15kg/sqcm pressure rated) drain water piping complete with fittings(elbows, tees, reducers,sockets,u trap etc.) supports, jointing insulated with XLPE class O tubular insulation and any other item required to make the system complete. Nominal diameters of pipe in mms as indicated below:

Drain Pipe 3/4" with fittings

Outdoor Stand L type or as per instructed by EIC

SITC of GI tray size 100mm x 50mm

Supply, installation, testing and commissioning of drain pump suitable for round cassette AC unit. The drain pump shall be of reputed make, compact design, suitable for continuous operation with integrated float switch and capable of lifting condensate water to a height of at least 5 meters. pump should have min two inlet provision Complete with all necessary accessories including piping, connectors, supports, power connections, and as required for proper operation.

aswani infrastructure (BID ID -3245275)

Apex Construction (BID ID -3242575)