Maintenance and Improvement works to the Assistant Engineer and Sanitary Inspector Ward Office at Ondipudur in Ward No.56, East Zone

Amount

Dismantling Damaged Plain Cement Concrete Including all, as per the direction of Departmental officers

EARTHWORK EXCAVATION for foundation in all soils and to full depth as my be directed except in rock requiring blasting, but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with standard specifications.

CEMENT CONCRETE 1:4:8 (One Cement, four sand and eight aggregate) using 40 mm gauge hard broken granite stone jelly for FOUNDATION including dewatering if found necessary and laid in layers of not more than 15 cm thick, complying with standard specification.

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15 cm thick well rammed watered and compacted etc., complete complying with standard specification.

BRICKWORK in cement mortar 1:5 (One cement and five sand) using second class table moulded chamber burnt bricks of size 23 x 11 cm x 7 cm for the following including curing etc., complete complying with standard specifications

S/F of RCC Ornamental Jolly as per direction of departmental officers etc,complete

S/F of MS Truss with purlins including all labours and transports charges as per direction of departmental officers.,

Supplying and fixing with galvanished iron sheet (corrugated) 24 gauge thick including necessary bolt, nuts and bitumen washer etc., completed - 10 m2

Supplying and fixin in position of solid PVC DOOR SHUTTERS using 19 gauge 19 mm MS sq tubes for styles and outer frames. 15mm MS square tubes for top,lock and bottom rails.The steel tubes shall be covered with 5mm thick solid PVC sheets.shutter usingetc.

Supplying and fixing in position best white glazed earthernware Oriya type INDIAN WHITE WATER CLOSET of approved quality of size 584mm with 'P' or 'S' trap and embedding the closet with trap to shape in position with 40mm brick jelly lime concrete 1:2:5ETC.

FLOORING with scratch proof CERAMIC TILES of approved quality and colour of size 305mm x 305mm x 6mm in all floors over 20mm thick cement mortar 1:3 (One cement and three sand) base above the existing bed concrete and pointed with same color cement added.

WEATHERING COURSE CONCRETE using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime(no sand to be added) over the RCC roof slabs in the proporation of brick jelly to lime being 32:12:5 by volume and laid in a single layer

Finishing the top of roof with one course of PRESSED TILES of size 23 cm X 23 cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight of cement used and the top pointed with same mortar mixed with red oxide to the full depth of tiles, complete complying with standard specification and as directed by the departmental officers.

Dadoing the walls from the floor level colour glazed tile of size 30cm x 20cm x 6mm of approved quality in CM 1:2 12mm thick and pointing with the same colour cement suitable for the tiles etc., complete

SPECIAL CEILING PLASTERING and finishing all the RCC exposed surfaces such as RCC slabs, sunshades,canopies,staircase steps,landing slabs etc., with cement mortar 1:3 (one cement and three sand) 10mm thick including hacking the surfaces and providing

PLASTERING with cement mortar 1:5 (One cement and Five Sand) 12mm thick in all floors complying with standard specifications.

CEMENT CONCRETE 1:2:4 (One Cement, two sand and four aggregate) using 20 mm gauge hard broken granite stone jelly including dewatering if found necessary and laid in layers of not more than 15 cm thick, complying with standard specification.

Wiring with 2 x 1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC light point / fan point (for electronic regulator)

Wiring with 2 x 1.5 sq. mm insulated SC unsheathed cu. Conductor of 1100 V grade with suitable PVC rigid pipe on walls & ceiling for concealed plug point

Supply and run of 2 of 4 sq.m (56/0.3)PVC insulated SC unsheathed CU.Conductor of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15

Painting with plastic emulsion paint in two coats over a base coat of Primer in approved colour and quality etc., complete.

Painting with enamel paint two coats over a base coat of approved colour etc complete - For Iron works

Supply and fixing of RCC precast circuler rings including all Labour Charges as per the Direction of the Departmental officers etc. complete.

Supply and fixing of RCC precast circuler cover slab including all Labour Charges as per the Direction of the Departmental officers etc. complete.

Supplying and fixing in position best indian make white glazed earthnware WASHHAND BASIN of 560 * 406 mm with a pair of CI Brackets, 15 mm dia CP Pillar tap,32 mm GI Waste water pipe ,32 mm dia CP , Brass waste coupling,plug with chain,15 mm dia PVC connection ,15 mm GM wheel valve with ISI mark and necessary GI union and GI Elbow, including fixing wash hand basin in position with nwhite lead , clamps,teakwood plugs,screws,rubber washer etc., complete without any leakage complying with standard specifications

Supply and fixing of single box type 4"40W flu fitting completed with copper choke and condensor,with condult pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with Tube.

supply and fixing of 25W LED street light fitting with LED (Lower end) with 19mm dia. GI pipe (class B) with 1 no.19mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .

max infratech projects (BID ID -1543400)