REPAIRS AT DAD RESIDENTIAL COMPLEX AND PAO ORs MLI OFFICE UNDER GE BELGAUM

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:6 finished even and fair without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed.

M&L for 15mm thick Rendering on fair faces of brick work or concrete surfaces in two layers as 10mm thick in cement mortar 1:6 followed by 5mm thick in cement mortar 1:4, with and including mixed with water proofing compound @2% of weight of cement and finish the surface even and smooth without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed. Note: Quoted rate shall be inclusive of WPC as specified..

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer and 1mm thick wall care putty, complete all as specified and as directed.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm with and including preparation of new plastered surfaces of any description, all as per manufacturer's instructions, complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint with and including preparation of old painted steel and steel based surface of any description, not otherwise described exceeding 10cm width or girth, complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint with and including preparation of old painted wood and wood based surface of any description not otherwise described exceeding 10cm width or girth, complete all as specified and as directed.

M&L for Preparation of new or previously untreated surfaces of steel or steel based surfaces of any description, not otherwise described, not exceeding 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Note: Quoted rate shall be inclusive of necessary scaffolding/shoring and other safety measures to be undertaken during execution of work.

M&L for applying two coats of Oil Bound Distemper over a coat of primer with and including complete removal of existing treatment on old ceiling surfaces with wire brush, scrapping down smoke soot ,mould, moss and efflorescent salts, trading oil and greasy spots, filling holes & cracks with cement base putty and including preparation of old decorated surfaces of ceiling, complete all as specified and as directed.

M&L for applying two coats of Oil Bound Distemper over a coat of primer on walls with and including complete removal of existing treatment on wall with wire brush, scrapping down smoke soot ,mould, moss and efflorescent salts, trading oil and greasy spots, filling holes & cracks with cement base putty and including preparation of old decorated surfaces of wall, complete all as specified and as directed.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm with and including complete removal of existing treatment on wall with wire brush, scrapping down smoke soot ,mould, moss and efflorescent salts, trading oil and greasy spots, filling holes & cracks with cement base putty and including preparation of old decorated surfaces of wall, complete all as specified and as directed.