REPAIR / MAINT OF JOINERY, ROOF TREATMENT, SUNKEN FLOOR UNDER AGE B/R-II AT NEW CANTT ALLAHABAD

Amount

Dismantling of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

M&L for 40 mm thck brick tiles laid on water proofing membranes and jonted flush pointed in CM 1:3 with 5% of crude oil incl bedding in cement in CM 1:4 15 mm thick shall be cured with water complete all as specified and directed.

All as per item No 2 above but except tiles (Note :- Old tiles shall be re-used as per direction of EIC)

Demolition of mud in roofs, any thickness, including plastering and leeping ( whether full thickness removed or only a part thereof) complete all as specified and directed.

Removing of surplus excavated/demolised materilas to a distance n.exc 50m and deposited where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed.

M&L cutting crack to 'V' groove section in existing roof cleaning out wetting grouting with cement and sand slurry of 1:3 complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for incl removing rubbish off the premises complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate in plinth protection, 75mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.

M&L for Rubber moulded chequered cement concrete tile 25 mm thick with grey cement and pigment set jointed and pointed in neat cement siurry over and including screed bed or bedding layer 15 mm thick in CM (1:6) in floor etc including dismantling of existing tiles complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregate in foundation ,filling and mass concrete complete all as specified.

M&L for 15 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) mixed with WPC complete all as specified and dierected. Note : WPC shall be measured and paid separately

M&L for PCC 1:2:4 type B1(using 20mm graded crushed stone aggregate) as in roof padding etc complete all as specified and directed.

M&L for normal water proofing treatment on roof slab consisting with following operation (i) Existing surface shall be cleaned of all dust, fungus, moss and other foreign material etc by using wire brushes, brooming, removing dust and applying with bitumen primer confirming to IS 3384- 1986 @ 0.40 Ltr per Sqm. (ii) laying 3mm thick APP membrane having non woven polyster matt at core and under surface coated with plastic polythene film, Polymeric water proofing membrane wt not less than 3 Kg per Sqm over. Laying shall be done using butane torch maintaining 100mm overlap and 150 mm end overlap, sealing all overlap complete including treatment at all junctions & corners. The membrane shall be tucked into groove on vertical plane and groove sealed with cement mortar. The treatment shall be provided upto 200 mm height above finished floor. The membrane shall have tensile strength of 700 N/5cm in longitudinal direction and 450N/5cm in transerverse direction at 23 C, flow resistance > 120 C dimensional stability < 0.5% when tesed as per ASTM D 5147. The laying of the membrane shall be done through authorized applicator of the manufactures.

M&L for preparation of new or previously untreated surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of aluminium paint, complete all as specified and directed.

Supply only integral water proofing compound ,ISI marked complete all as specified and directed.

M&L in repair Screed bed 15 mm thick in cement mortar 1:4 over roof slab mixed with water proofing compound (to be measured and paid separately) as per manufacturer’s instructions finished even & fair complete all as specified and directed.

M&L for PCC1:2:4 type B-0 using 12.5 mm graded stone aggregate in roof curbs, mud stops or chamfered on edges all as directed including necessary form work etc complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, staircases, landings and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in chajjas complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately).

M&L for Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately).

M&L Water proofing treatment on sunken floor consisting of the following operation :- (i) Cleaning of surfaces by wire brushing brooming removing dust particles (ii) M&L PCC 1:2:4 type (B0) using 12.5 mm graded stone aggregate 50 mm thick, finishing the surface even and smooth without using extra cement (iii) Applying two coat of chemical Dr fixit pidi fin 2K (iv) Applying fibre mesh setting with chemical Dr fixit Pidicrate URP (v) final coating with piifin 2K and sprinking of sand (vi) After the surface dried screeding the surface with CM 1:4, 15 mm thick including finishing even and smooth using extra cement.

Demolition of brick work built in cm or cement lime mortar including all quoins, arches, pillers, etc. complete all as specified and directed.

M&L for brick work with fly ash old size bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) complete all as specified and directed at site.

All as per srl item No 23 above but except old size sub class 'B' bricks. (Note:- Old bricks retrieved from demolition shall be re-used)

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and cluding rendering 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including p or s trap and provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe etc complete all as specified and directed.

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.

S&F, in repair PVC Flushing cistern 10 ltr capacity with inlet ball valve float and handle and 32mm bore flush pipe including bracket complete all as specified and directed.

S&F in repair PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.

M&L in repair 15mm Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

M&L in repair 15mm Stop valves, fancy type, chromium plated , cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair of 15mm dia bib tap standard of PTMT any colour, high pressure screwed for iron pipe with minium weight 90gms,complete all as specified and directed.

S&F in repair bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule ,15mm bore complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 65 to 90 mm size , shower Arm with swivel joints complete all as specified and directed.

S&F in repair chromium plated towel ring 20mm dia and 600mm long fixed with screws to all complete all as specified and directed.

S&F in stainless steel soap disk fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repair rotational moulded,multilayer HDPE water storage tank of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repair ball valves 20mm bore of dia of pipe high pressure of PTMT with epoxy coated aluminium rod high density plastic balls screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair ball valves 15mm bore of dia of pipe high pressure of PTMT with epoxy coated aluminium rod high density plastic balls screwed for iron pipe and fixed complete all as specified and directed.

Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from sit complete all as specified and directed..

M&L for 15mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors complete all as specified and directed.

M&L for 20 mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors complete all as specified and directed.

Refixing old 15mm dia bore steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors complete all as specified and directed.

Refixing old 20mm dia bore steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors complete all as specified and directed.

Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete all as specified and directed.

S&F 20 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking down PVC pipe of any size or pattern including all fitting head, shoe, band, swan neck etc complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipe single socket in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 100 mm bore PVC (SWR) pipe single socket in any length with rubber ring joints fixed to walls complete all as specified and directed.

Refixing old 75 mm bore PVC (SWR) pipe single socket in any length with rubber ring joints fixed to walls complete all as specified and directed.

Refixing old 100 mm bore PVC (SWR) pipe single socket in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F PVC (SWR) Bend 75mm dia complete all as specified and directed.

S&F PVC (SWR) Bend 110 mm dia complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area exc1.5 but n. exc 4 Sqm each complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed.

Taking down shutters of any description n exc 1 sq. m each complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq m each complete all as specified and directed.

Taking down door shutters of any description exc 1 Sqm & n.exc 2 Sqm each and refixing in the same opening after easing and adjusting complete all as specified and directed.

Taking down door shutters of any description n exc 1 Sqm each and refixing in the same opening after easing and adjusting complete all as specified and directed.

M&L for 2nd class hardwood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F Flush shutters 32 mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered beads for securing glass/ gauge complete all as specified in SSR Pt I-1991 section 8 clause 8.24 (a) and as directed.

S&F 200 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium bow handle, cast type,anodised 125mm long complete fixed with steel screws complete all as specified and directed.

S&F 250 mm long Aluminium sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with & including a min of 6 bolts & nuts four on bolt plate & two on staple plate & fixed complete all as specified and directed.

S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for Top & bottom rails. MS frame shall be covered with heat molded plain cover PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium bow handle,cast type,anodised 100mm long complete fixed with steel screws complete all as specified and directed.

S&F in repair 18/19mm thick prelaminated medium density fibre board,commercial type,interior grade adhesive as in cup board shutters/ shelves and pelmets etc., fixed with screw/ nails including 4mm thick teak wood lipping duly french polished alround complete all as specified and directed.

S&F in repair 18/19mm thick prelaminated particle board,interior grade,(one side decoratve and other side balancing white), flat perssed, single or three layer type with BWR adhesive fixed to Timber frame work etc., fixed with screw complete all as specified and directed.

S&F/fabrication in repair cupboard made out of 18mm thick PVC board laminated sheet with handles complete all as specified and directed by Engineer in Charge.

S & F continues (piano) hinges, mild steel, bright finish width of flap (when open) 30mm complete all as specified and directed.

S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified and directed.

S&F 75 mm dia brass handle cast type polished bright finish complete all as specified and directed.

S&F Locks, cupboard, grade I, size 50mm complete all as specifeid and directed.

S&F hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screws 100 mm size complete all as specified and directed.

S&F floor door stopper overall length of cover plate 150 mm of aluminium alloy body and tongue, anodised,with hard drawn steel spring complete all as specified and directed.

S&F Steel ventilators, fixed type, with glazing bars complete all as specified and directed.

S&F steel ventilators with top hung shutter including box type hinges, steel peg stay without glazing bars complete after taking down and removing old unserviceable steel ventilators complete all as specified and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specifeid and directed.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specifeid and directed.

S&F mild steel work as in window guard bars, plain let in and fixed independently in wooden/steel frames L or T section support for shelves etc., and similar articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed trusses etc complete all as specified.

S&F mild steel Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and directed.

M&L for preparation of old painted surface of steel and iron of any discription, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.

M&L for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted surface of wood and wood based materials of any discription, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.

S&F 3 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n exc. 0.5 Sqm in each pane complete all as specified and directed.

S&F 3 mm thick figured glass, pin headed and glazing with oil putty or wooden beads in square area n exc. 0.5 Sqm in each pane complete all as specified and directed.

S&F Stainless steel wire mesh 0.36 mm dia fixed with tinned tacks of stainless steel wire and avg width of aparture 1.4mm complete all as specified and directed.

S&F in repairs Stainless steel wire mesh 0.36 mmdia fixed with tinned tacks of stainless steel wire and avg width of aparture 1.4mm complete all as specified and directed.

S&F in repair 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed.

S&F in repair 3 mm thick figured glass, pin headed and glazing with oil putty or wooden beads in square area n exc. 0.5 Sqm in each pane complete all as specified and directed.

M&L for repairs to steel window hinges (projecting or box type) including taking out old unserviceable one for carriage upto workshop and fixing new hinges by means of welding at places of ground floor or first floor complete all as specified and directed.

M&L for Cleaning of steel window by removing scals, rust, dirt, from frames, hinges, making good deformed member of windows by hammering all insitu (without taking off the window) size n.exc 1.75 Sqm complete all as specified and directed.

S&F in repair MS handle for steel window (left/righ) including nut bolt & one pair of steel washers complete all as specified and directed.

S&F in repair MS peg stay for steel window (left/right) complete all as specified and directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L 15 mm thick rendering on brick work or concrete surface in cement mortar 1:4 mixed with water proofing compound, surface finished even and smooth complete all as specified and as directed. (Note : Water proofing compound shall be measured and paid separately as supply only).

M&L Rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M&L for Rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed.

M&L 10 mm thick rendering in cement mortar 1:4 on fair faces of concrete surfaces such as side, top of RCC chajja mixed with water proofing compound @ 3% by the weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed. (Note : Water proofing compound shall be measured and paid separately).

M&L for preparation of new plastered surfaces of wall and applying two coats of Oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

S&F 25mm dia aluminium powder coated Drapry rod fixed with decorated polished brackets and end knobs complete all as specified and directed.

M&L Mild steel TMT bars 6 to 8 mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Formwork to sides and soffits of slabs n. exc. 200 mm thick and similar works rough finished surfaces of concrete complete all as specified and directed.

M&L Water proofing treatment to walls of bathroom consisting of the following operation :- (i) Cleaning of surfaces by wire brushing and removing dust particles (ii) Filling of all brick joints with cement mortar 1:4 (iii) Applying two coat of chemical Dr fixit pidi fin 2K (iv) Applying fibre mesh setting with chemical Dr fixit Pidicrate URP (v) final coating with piifin 2K and sprinking of sand (vi) After the surface dried screeding the surface with CM 1:4, 15 mm thick including finishing even and smooth using extra cement.

M&L for running welding at site in repairs exc 6mm but n exc 9mm in length ,thickness of Metal to be welded not exe 06mm complete all as specified and directed.

M&L for welding at site in repairs exc 2.5cm but n exc 5cm in lengt in length ,thickness of Metal to be welded not exe 06mm complete all as specified and directed.

S&F rubber door seal 5mm thick,32mm wide, with Aluminium strip of size 19mm thick fixed with machine steel screw with washer complete all as specified and directed.

S&F in repair kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers and waste pipe, including bedding in cement mortar 1:3 to dwarf wall or fixing cantilever brackets and connecting union to waste pipe, overall size 915mmx460 mm and bowl size 410x330x160mm complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack (utensil rack) of size 600mmx750mmx250mm, made out of 1mm thick stainless steel sheet, approved design and fixed to wall with brass screws and PVC gully including all necessary fittings like nuts and bolts etc complete all as specified and directed.

S&F Anodised aluminium frame for doors, windows, ventilators, partition, posts to sustain curtain rail etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Anodised aluminium door shuttrs, aluminium sectioin weighing 0.55 kg/m including necessary joinin cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, hinges, anodised aluminium snap beading screws with provision of double action floor spring etc complete all as specified and directed.

S&F Anodised aluminium window and ventilator shuttrs, side hung type without sash, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1no) hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified and directed.

S&F for aluminium anodized grills with 6 x 5 mm aluminium section having square gap of 50 mm thick with fixing rails of channels 12-15 mm complete all as specified and directed.

S&F Sheet glass 5 mm thick, ordinary quallity and glazing with aluminium beading and rubber sealin square exc 0.5 Sqm in each pane complete all as specified and directed.

Dismantling boarding/fibre board any description, fixed in any position with nails inclusing cover fillets complete all as specified and directed.

M&L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specifiecation including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B0/Cement mortar 1:3 complete all as specified and directed with following:- (a) M&L Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong or equivalent) of size 25x25mm. (b) S&F 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling with dash free fasteners. (c) S&F GI powder coated tee as in main & cross members at 595 mm centre to centre supported suspenders alongwith adjustable clamp to maintain level. (d) S&F E-board ceiling tiles of size 595 mm x 595mm x 4mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be as approved by GE.

S&F vitreous china wash basin, white, flat back type of size 580x450mm including brackets including cutting for and pinning in ends of brackets in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.

S&F pillar taps 15mm bore, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair pillar taps 15mm bore, fancy type, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair stainless steel peg set of 4 of approved quality complete all as specified and directed.

S&F in repair sheet glass shelf assembly 60cm long, 12cm wide, made out of 5.5 mm thick glass with CP bracket guard and railing, fancy type, fixed to plug with CP screws and cup washer complete all as specified and directed.

S&F in repair PVC (SWR) floor trap plain with grating in cluding jointing with solvent cement 75/100mm dia complete all as specified and directed.

S&F in repair PVC (SWR) nahani trap plain with grating in cluding jointing with solvent cement 75/100mm dia complete all as specified and directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in repair Machine pressed precast conctete nterlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement no pigment complete including 25 mm thick sand cushion including dismantling of existing tiles complete all as specified and directed.

M/S PRAGATEE ENTERPRISES

CROWN ENGINEERING CORPORATION

K L KALSI

Siddhi Constructionn

Technological Associates

Raghvendra Enterprises

Channa Brothers and Co.