CONTRACT FOR REPLACEMENT OF EXISTING DAMAGED SHEETS WITH NEW NON-ASBESTOS SHEETS OF LIFT SHAFT WITH MAKING AN ARRANGEMENT (OUTSIDE AND INSIDE) FROM GROUND LEVEL TO TOP AS REQUIRED FOR WORKING AT HEIGHT IN TAE AT RCF THAL

MAKING AN ARRANGEMENT FROM GROUND LEVEL TO TOP OF LIFT SHAFT TOWER FROM OUTSIDE AND INSIDE AS REQUIRED WITH NECESSARY SCAFFOLDING / MAST CLIMBER WITH / WITHOUT SUSPENDED PLATFORM SYSTEM FOR WORKING AT HEIGHT FOR REPLACEMENT OF EXISTING SHEETS WITH NEW NON-ASBESTOS SHEETS.THE MAST CLIMBER WITH/WITHOUT SUSPENDED PLATFORM SYSTEM SHALL BE INCLUDING ALL REQUIRED EQUIPMENTS & ACCESSORIES OF APPROPRIATE CAPACITY AND CAPABLE TO DO INTENED JOBS MENTIONED IN THE SCOPE OF THE WORK INCLUDING REQUIRED TOOLS TACKLES,MATERIALS AND MANPOWER /EXPERTS ETC.COMPLETE.THE ARRANGEMENT SHALL BE COMPLIANCE TO THE SAFETY NORMS/PROCEDURE REQUIRED FOR THE JOB. THE ARRANGEMENT SHALL BE KEPT TILL SATISFACTORY COMPLETION OF THE ENTIRE JOB. REMOVING THE WHOLE ARRANGEMENT AFTER COMPLETION OF THE WORK AS DIRECTED BY EIC. INCLUDING MAKING ARRANGEMENTS OF SCAFFOLDING USING MS PIPES AND COUPLERS AND OR H -FRAME, BRACINGS OR COMBINATION OF THESE TO ARRIVE A SUITABLE GRID OF SCAFFOLDING FOR ACCESSING REPLACEMENT OF SHEETS AS PER REQUIREMENT. REMOVING OF OLD SHEETS & FIXING OF NEW SHEETS SHALL BE PAID SEPERATELY.

PROVIDING AND FABRICATING STRUCTURAL STEEL WORK IN ROLLED SECTIONS LIKE FLATS, JOISTS, CHANNELS, ANGLES, TEES ETC. AS PER DETAILED DESIGN AND DRAWINGS OR AS DIRECTED INCLUDING CUTTING, FABRICATING, HOISTING, ERECTING, FIXING IN POSITION MAKING RIVETED/BOLTED/WELDED CONNECTIONS WITHOUT CONNECTING PLATES, BRACES ETC. AND INCLUDING ONE COAT OF ANTICORROSIVE PAINT AND OVER IT TWO COATS OF OIL PAINTING OF APPROVED QUALITY AND SHADE ETC. COMPLETE.

PROVIDING & FIXING IN POSITION GALVANIZED IRON STRIPS FOR FIXING SHEETS ON ITS LOCATION IN LIFT TOWER OF APPROVED SIZE BY EIC TO MATCH WITH EXISTING STRUCTURAL FRAME & SHEETS. FOR FIXING IN POSITION AS DIRECTED INCLUDING NECESSARY STIFFENERS, SUPPORTING ARRANGEMENT, CUTTING, FABRICATING/ BENDING TO REQUIRED SHAPE, MAKING & FIXING IN POSITION WITH NECESSARY SCREWS, CLAMPS, BOLTS AND OTHER FASTENERS AND NECESSARY WELDING IF REQUIRED. ALL JOINTS TO BE THOROUGHLY FIX IN REQUIRED SIZE AND PATTERN WITH ALL FITTINGS COMPLETE.

ERECTING, HOISTING AND FIXING IN POSITION STRUCTURAL STEEL WORK IN SINGLE OR BUILT-UP SECTIONS AT ALL HEIGHTS AND LEVELS (DISMANTLED, PRE-FABRICATED STEEL STRUCTURE) WITH REQUIRED APPROVED NUT BOLTS ETC. IF WELDING IS REQUIRED SAME SHALL BE GOT APPROVED BEFORE FIXING STRUCTURAL MEMBER IN POSITION. M.S. PIPE SCAFFOLDING AND APPLYING INCLUDING ONE COAT OF ANTICORROSIVE PAINT AND OVER IT TWO COATS OF OIL PAINTING OF APPROVED QUALITY AND SHADE ETC. COMPLETE AFTER FABRICATION INCLUDING TOUCHING UP AFTER ERECTION ETC. COMPLETE AS DIRECTED BY ENGINEER. (STRUCTURAL STEEL MATERIAL AND PAINT WILL BE SUPPLIED BY RCF, PARTY TO SHIFT MATERIAL FROM STORES TO SITE. ALL CONSUMABLE GASES AND OTHER MATERIAL ARE IN SCOPE OF CONTRACTOR)

SUPPLYING & FIXING OF 0.5 MM THICK META COLOUR CORRUGATED SHEETS I.E. 0.45MM BASE METAL THICKNESS AND 0.50MM TOTAL COAT THICKNESS OF MINIMUM YIELD STRENGTH OF 550 MPA FOR ROOFING AND CLADDING AND AS PER THE BELOW MENTIONED TECHNICAL SPECIFICATIONS INCLUDING CORNER PIECE, RIDGE, GUTTERS ETC. PPGL- PRE PAINTED GALVALUME STEEL SHEET ZINC COATING : AZ 150 PAINT COATING : SUPER DURABLE POLYESTER(SDP) PAINTING / SILICON MODIFIED POLYESTER (SMP) PAINTING AS DIRECTED BY EIC PAINTING THICKNESS (TOP) : 25 MICRON PAINTING THICKNESS (BOTTOM) : 5-7 MICRON

PROVIDING & FIXING OF 6 MM THICK TOP SIDE COLOUR COATED NON-ASBESTOS CEMENT CORRUGATED SHEETS (ROOF SHEETS, VERTICLE SHEETS) WITH REMOVING OLD SHEETS & CONFORMING TO IS:14871 OF VARYING LENGTHS INCLUDING 8MM DIA. STAINLESS STEEL (SS 304) J OR L HOOK BOLTS WITH 50MM MINIMUM THREADED LENGTH, SS WASHERS, SS NUTS, CORNER PIECES, RIDGES, GUTTERS, CUTTING SHEETS TO SIZE AND SHAPE WHEREVER REQUIRED, NECESSARY. (INCLUDING REMOVAL OF EXISTING OLD SHEETS AND STACKING AS REQUIRED AS DIRECTED BY EIC) (LAPS SHALL NOT BE PAID EXTRA, SHEET COLOUR TO BE APPROVED BEFORE USE) (CORNER PIECES, RIDGES SHALL BE PAID SEPERATELY)

FIXING OF NEW/OLD RCF ISSUED SHEETS AFTER REMOVING OLD ASBESTOS / FIBER / METAL SHEETS AS PER EXISTING PATTERN BY NEW SS- L & J- SHAPE HOOKS (S.S. HOOKS SHALL BE PAID SEPARATELY IN ITEM NO. 8 BELOW) WITH CAREFULLY SHIFTING/SLIDING OF OLD SHEETS. STACKING OF OLD USABLE MATERIALS & DISPOSAL OF DEBRIS WITHIN TAE PLANT PREMISES AS DIRECTED BY EIC. REMOVING OF OLD SHEETS SHALL BE PAID SEPERATELY.

SUPPLYING L & J- SHAPE SS HOOK FOR IS SECTION; MOC= SS 304; DIA.= 8 MM; MINIMUM THREADED LENGTH 50MM INCLUDING EPDM ROUND WASHER / SS ROUND WASHER / SS NUT & PVC CAP ETC. AS DIRECTED BY EIC.

PROVIDING AND FIXING 1.5 MM THICK POLYCARBONATE WHITE DIFFUSER TYPE CORRUGATED ROOF SHEETS PANEL OF APPROVED MAKE WITH REMOVING OLD SHEETS, INCLUDING 8MM DIA. STAINLESS STEEL (SS 304) J OR L HOOK BOLTS WITH 50MM MINIMUM THREADED LENGTH, SS WASHERS, SS NUTS, CUTTING SHEETS TO SIZE AND SHAPE WHEREVER REQUIRED, NECESSARY (INCLUDING REMOVAL OF EXISTING OLD SHEETS AND STACKING AS REQUIRED AS DIRECTED BY EIC) (LAPS SHALL NOT BE PAID EXTRA) .

REMOVING OLD/EXISTING SHEETS (ASBESTOS / FIBER / METAL SHEETS) WITH CAREFULLY SHIFTING/SLIDING OF OLD SHEETS. STACKING OF OLD USABLE MATERIALS & DISPOSAL OF DEBRIS WITHIN FACTORY PREMISES AS DIRECTED BY EIC. (INCLUDING SCAFFOLDING, WHICH SHALL NOT PAID EXTRA)