SPECIAL REPAIRS AND ADDITION/ALTERATION TO BUILDING NO P 23(MES OFFICE) AT CGRA TUTICORIN AND SPECIAL REPAIR AND ADDITION/ ALTERATIONS TO EXISTING LT UG CABLE TO SO S/EPS QUARTER AT CGRA NEW OTM DIVING CELL AT TUTICORIN UNDER GE(I)(CG) CHENNAI

Amount

Material and labour for Complete removal of existing treatment on wall surfaces and applying two coats of acrylic distemper over a coat of wall care putty of thickness 1.5mm and alkali resistant primer complete all as specified and as directed.

Material and labour for Preparation of old painted surfaces of ceilings and applying one coat of acrylic distemper complete all as specified and as directed.

Material and labour for complete removal of existing treatment on external surfaces of walls and applying two coats of weather proof exterior emulsion over a coat of primer complete all as specified and as directed. Make:APEX ULTIMA FROM ASIAN/ Berger weather coat paint

Taking down chowkhats or frames not exceeding 1.5 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down chowkhats or frames exceeding 1.5 sqm and not exceeding 4.0 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube as per specification & drawing complete all as specified and as directed

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel and a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail Panelling to plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specification and drawing complete all as specified and as directed

Supply and fix powder coated aluminium frame for doors, windows, ventilators with one or more rebate including joining cleats, glazing clips rubber packing anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Supply and fix Anodised aluminium door shutter , aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips ,rubber neoprene, handle 2 Nos. in each door packing, anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Supply and fix powder coated aluminium window and ventilator shutters ,sliding type without sash bar , aluminium section weighing 0.55 kg/RM including necessary joining cleats, glazing clips ,rubber packing, anodized alumnium snap beading screws etc complete all as specified and as directed. Note : Minimum thickness of powder coating 50 microns.

Material and labour for Prelaminated particle board 12 mm thick exterior grade prelaminated both side with decorative choice lamination fixed with screws to timber/aluminium frame work complete all as specified and as directed.Make :Novopan/Anchor/ Kitply

Material and labour for Prelaminated particle board/MDF sheets 18/19 mm thick ,interior grade ,prelaminated both side with decorative choice laminationsn with lipping fixed with screws to aluminium frame work, drawers, office table , partition work etc complete all as specified and as directed. MAKE:Century ply/kit ply/Green ply

Supply and fix Second class hard wood plain ,fillet , square ,recangular or triangular in section, clean sawn of size n. exc 03 sqcm secured with nails or brads fixed to wall for cupboards complete all as specifed and all as directed.

Material and labour for Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed as complete all as specified and as directed.

Supply and fix Aluminium body(Die cast) door closer hydraulically regulated, designation No. 2 universal type, suitable for door shutters of width 701 to 850 mm of weight between 36 to 60 Kg complete all as specified and as directed.Make: Hardwyn/Everite (ISI Marked)

Supply and fix 100 mm Butt hinges,Stainless steel ISI Marked, and fixed and fixed complete all as specified and as directed.

Supply and fix 150 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix Stainless steel soft closing hinges suitable for Drawers/cup board shutters complete all as specified and as directed.Make : SLEEK / HETTICH / HAFALE

Supply and fix telescopic channels/drawer slides 500mm long of Zinc coated mild steel for modular kitchen baskets with load carrying capacity of 45Kg complete all as specified and as directed Make : SLEEK Model No:HICH1034 or Equivalent price and specification in HETTICH/HAFALE

Supply and fix 150 mm long floor door stopper of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed to door with MS screws complete all as specified and as directed

Supply and fix 150 mm long extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

Supply and fix aluminium mortice lock ,vertical type ,4 lever ,size 100 mm fixed in aluminium doors complete all as specified and as directed.

Supply and fix brass locks ,drawer,grade I ,2 lever ,size 50 mm complete all as specified and as directed.

Supply and fix Drawer handles of Projection drop (50 mm to 65 mm) screwed on plate complete all as specified and as directed.

Supply and fix hasp and staple ,safety type ,aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws of size 100 mm complete all as specified and as directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) including removing serviceable tiles to store and rubbish off the premises not exceeding 100 metre complete all as specified and as directed.

Material and labour for Double Charged Virtified tiles 10 mm thick polished ,size of each tile not less than 800mm x 800mm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 15 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Double Charged Virtified tiles 10 mm thick polished , area of each tiles exceeding 0.36 sqm but not excedding 0.42 sqm in skirting etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 10 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Non skid ceramic coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.06 sqm but not exc. 0.11 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface joint free including screed bed in cement mortar 1:4 , 15 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for Glazed ceramic coloured tiles , Premium quality in vertical surface such as skirting,Dado/Risers of size 350mmx250mm x7 mm thick/450x350x x 6mm/7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 10 mm thick complete all as specified and as directed. Note :Make of Glazed ceramic tile:Johnson/Khajaria/Somany

Material and labour for Granite stone 20mm thick (black galaxy) work including nosing (table rubbed and polished) in single piece in steps, jambs, pillars, window- cills, cooking platforms including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over a backing coat of 15mm thick cement mortar 1:4 complete all as specified and as directed.

Supply and fix Plain sheet glass 4 mm thick ordinary quality and glazing with oil putty in squares/Rectangular n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix toughed glass, 10 mm thick ordinary quality and glazing with oil putty in squares/Rectangular exc 0.5 sqm in each pane complete all as specified and as directed.

Material and Labour for grinding, polishing and rounding off edges of glass, any type of exc 4 but not exc 8 mm thick complete all specified and as directed.

Supply and fix Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed .

Supply and fix powder coated aluminium grill DG 916 of 10mm dia rod square/ rectangular/ circular or similar type of shape, aperture not exc 7 cm in length or width fixed with 'H' or 'F' channel of size 38mm x 12 mm x 1.30mm (Sec No 8778) Make : Grill No 20 of DECOREL complete all as specified and as directed.

Supply and fix frosted sheet glass 4mm thick , ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane fixed to aluminum frame complete all as specified and as specified

Taking up or down of unservicable/rusted steel tubing 25 mm dia and connections from excavated trench,Walls, floors,ceiling etc complete all as specified and as directed.

Taking up or down of unservicable/rusted steel tubing 20 mm dia and connections from excavated trench,Walls, floors,ceiling etc complete all as specified and as directed.

Taking up or down of unservicable/rusted steel tubing 15 mm dia and connections from excavated trench,Walls, floors,ceiling etc complete all as specified and as directed.

Supply and fix 25 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed

Supply and fix 32 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 (PN 16 & PN 10) UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed

Supply and fix in repair PVC valveless lowlevel flushing cistern 10 litres capacity with complete accessories fixed with in let ball valve and necessary mild steel brackets and fixing of chain and pully or lever if any and including provision offlush pipe of polyethyleneof 32 mm dia complete all as specified and as directed. Make:Jaquar&co/KOHLER

Supply anfd fix in repairs plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminium hinging devices complete all as specified and as directed.Make:Jaquar&co/KOHLER

Supply and fix in repairs vitreous china wash basin, white flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or errecting stand complete all as specified and as directed.Make:Jaquar&co/KOHLER

Supply and fix in repairs Brass chromium plated shower rose size 125 mm with swivel joints including fixing to steel pipe or union complete all as specified and as directed. Make:Jaquar&co/KOHLER

Supply and fix in repair chromium plated fancy type, long body 15mm dia bore Bib tap , cast copper alloy with long body screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.Make:Jaquar&co/KOHLER

Supply and fix in repair Fancy type chromium plated pillar taps, 15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make:Jaquar&co/KOHLER

Supply and fix in repair chromium plated fancy type 15mm dia bore Angle stop valve , cast copper alloy , screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.Make:Jaquar&co/KOHLER

Supply and fix in repairs PVC flexible connection 15mm size with PTMT nuts of length 600mm long complete all as specified and as directed.

Supply and fix in repair brass chromium plated tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges including brackets complete all as specified and as directed.Make:Jaquar&co/KOHLER

Supply and fix in repairs CP hand shower( health faucet) with 15 mm dia and 1500mm long flexible tube with wall hookcomplete all as specified and as directed.Make:Jaquar&co/KOHLER

Supply and fix in repairs 20 mm dia Stainless steel curtain rods fixed over windows/door openings complete all as specified and as directed

Supply and fix in repairs 20 mm dia fancy Stainless steel knobs/brackets for fixing curtain rod of 20 mm diameter complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins,arches, pillars etc including removal of debris outside MD land complete all as specified and as directed.

Material and labour for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for Rendering in CM 1:4, ,15 mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply and fix in repair Flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and as directed

Demolition of plain cement concrete in groud floors and pavings not exceeding 15 cm thickness including removal of debris outside MD land complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete 1:3:6 type C2 using 40 mm graded granite stone aggregate as in plinth protection and pavings finished fair and even without using extra cement including making grooves at junction of existing wall and in plinth protection at 2.50 meter c/c complete all as specified and as directed.

Supply and fix 75 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors including all fittings and taking down old unserviceable PVC pipe of 75 mm dia complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply and fix 110 mm dia PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors including all fittings and iincluding taking down old unserviceable PVC pipe of 110 mm dia complete all as specified and as directed.Make:Finolex/Supreme

Supply and fix PVC (SWR) floor trap of 75/110 mm dia of outlet , plain with grating including jointing with solvent cement complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply and fix PVC (SWR) gully trap of 125/110 mm dia of outlet , setting and jointing with solvent cement complete all as specified and as directed.Make:Finolex/Supreme/Tru bore

Supply anfd fix in repairs Vitreous china wash down water closet pan (pedestal pattern ),white ( including fixing bolts ) including connection to drain pipe and to flushing pipe etcand removing old one and taken as credit complete all as specified and as directed.Make:Jaquar&co/KOHLER

Supply and fix in repairs Gun-metal, globe or gate valves 25mm dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed

Taking down cement plaster /tiles on roof including raking out joints,hacking for key,scrubbing down with water including removal of debris outside MD land complete all as specified and as directed. complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar 1:3 on fair faces of brick wall or stone masnory , mixed with water proofing compound as per manufacturer’s instruction , finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid separately.

Supply and fix Heat Resistant/Cool roof Terrace Tiles (300 mm x 300 mm and 8 to 10 mm thick) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 15 mm thick screed bed in CM 1:4 and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including providing skirting upto 150 mm height along the parapet walls in the same manner in the terrace floor and skirtings complete all as specified and as directed. Make:Johnson Endura/Khajaria Note:Water proofing compound will be measured and paid separately.

Supply only Intergal Water Proofing Compound . Make of water proofing compound : Impermo/Roff/Cico

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation etc. n.exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specifed and as directed.

Demolition and breaking up drain pipe, 150 mm dia( salt glazed stone ware or AC or reinforced cement concrete) set in cement mortar complete all as specified and as directed.

Material and labour for Reinforced cement concrete Class NP2 pipes ISI Marked ,150 mm bore with one collar per length of pipe complete all as specified and as directed

Material and labour for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in concrete bed to drain pipes of 150 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Supply and fix in repairs Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (including connections to flushing pipe and outgoing pipes fixed in repairs ) complete all as specified and as directed.

Material and labour for Hard core of gauge n exc 63 mm graded crushed stone aggregate deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed

Material and labour for Plain Cement concrete 150 mm thick 1:2:4 type B-1(using 20 mm graded stone aggregate) as in sub base of flooring/hard standing including necessary form workcomplete all as specified and as directed.

Material and labour for Machine pressed rubber moulded precast concrete interlocking paver block , any shape and size of 60 mm thickness, M-35 Grade laid over and including 50 mm thick sand cushion and joint filled with fine sand including levelling tamping & sweeping etccomplete all as specified and as directed. Make: M/S ULTRA/M/s Bharat Tiles & Marble PVT LTD, M/s National Tiles & Industries PVT LTD, M/s NitcoTiles PVT LTD, M/s Vitco tiles Bombay, M/s Mehatab Tiles

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including removal of debris off the premises and serviceable items taken as credit complete all as specified and as directed. all as specified and as directed.

Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.Make:Tata Blue Scope/Jindal/Llyod

Material and labour for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.Make:Tata Blue Scope/Jindal/Llyod

Supply and fix Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Grade-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') Complete all specified and as directed.

Supply and fix Wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples of mesh 12mm x 12 mm complete all as specified and as directed.

Supply and fix Modular Bell push 6A 1 module including taking down old unserviceable bell push and taken as credit complete all as specified and as directed. Make:-ANCHOR/LEGRAND/SCHNIEDER

Supply and fix Call bell ding dong, AC, 230 V, single pole, including taking down old unserviceable calling bell and taken as credit complete all as specified and as directed. Make:- Anchor/Rider

Supply and fix Modular switch 6 Amps ,single pole, one way ,one module , 240V AC,including taking down old unserviceable modular switch and taken as credit complete all as specified and directed. Make:-ANCHOR /LEGRAND/SCHNIEDER

Supply and fix Modular switch 1 way 16A,single pole 1 module including taking down old unserviceable switch socket and taken as credit complete all as specified and directed. Make:-ANCHOR /LEGRAND/SCHNIEDER

Supply and fix Modular socket 6A - 2/3 pin combined 2 module, including taking down old unserviceable switch socket and taken as credit complete all as specified and directed.Make:-ANCHOR /LEGRAND/SCHNIEDER

Supply and fix Modular socket 16A - 2/3 pin combined 2 module, including taking down old unserviceable switch socket and taken as credit complete all as specified and directed Make:-ANCHOR/LEGRAND/SCHNIEDER

Supply and fix Stepped type electronic fan regulator flush type , socket type , 120W-2module on the existing phenolic laminated sheet including taking down old unserviceable one and taken as credit complete all as specified and directed Make:-ANCHOR/LEGRAND/SCHNIEDER

Material and labour for Painting of ceiling fan/Exahust fan/DB panel of any size/make/model complete in site with synthetic enamel paint by brush including filling cavities with filler,one coat of after cleaning all dust and rewiriting the fan number complete all as specified and directed .

Supply and fix modular white cover plate with frame 2 Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- ANCHOR /LEGRAND/ABB

Supply and fix modular white cover plate with frame 3- Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- ANCHOR/LEGRAND/ABB

Supply and fix modular white cover plate with frame 4- Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- ANCHOR/LEGRAND/ABB

Supply and fix modular white cover plate with frame 6- Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:- ANCHOR/LEGRAND/ABB

Supply and fix modular white cover plate with frame 8- Module including taking down old unserviceable cover plate and taken as credit complete all as specified and as directed.. Make:-ANCHOR /LEGRAND/ABB

Supply and fix modular metal flush box for 2 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. MAKE:ANCHOR /LEGRAND/ABB

Supply and fix modular metal flush box for 3 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. MAKE:ANCHOR /LEGRAND/ABB

Supply and fix modular metal flush box for 4 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. MAKE:ANCHOR /LEGRAND/ABB

Supply and fix modular metal flush box for 6 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. MAKE:ANCHOR/LEGRAND/ABB

Supply and fix modular metal flush box for 8 Module including taking down old unserviceable metal box and taken as credit complete all specified and as directed.. MAKE:ANCHOR/LEGRAND/ABB

Supply and fix MCB SP of rating 6-40Amps , 240 V, C curve ,Rupturing capacity10KAincluding taking down old unserviceable MCB of any rating and taken as credit complete all as specified and directed Make:- Siemen/Legrand/Schneider

Supply and fix MCB SPN of rating 40 Amps, 240 V, C curve ,Rupturing capacity10KA ncluding taking down old unserviceable MCB of any rating and taken as credit complete all as specified and directed Make:- Siemen/Legrand/Schneider

Supply and fix ceiling rose 3 terminals PVC / Polycarbonate, isolated body complete all as specified and as directed. Make : Baja/Anchor/HPL

Supply and fix High efficiency 1x1 feet recess mounted type Flat panel 15W ,230 V, LED luminaire,Minimum 6000 K. 90 Lumens/watt with suitable integral electronic drivers ,CRCA/poly carbonate type suitable for amstrong/grid ceiling with super bright LED etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old U/S CFL fittings complete all as specified and as directed Make: Wipro/crompton /Philips

Material and labour for dismantling ceiling fan of any size from its position, dismantling blade, opening the fan motor, removing the burnt grease, applying new bearing grease, removing wornout bearing,burnt winding and cleaning the slot,rewinding with super enamelled copper wire of suitable size ,varnishing ,heating and insulating including fixing new ball bearing/bush, hanging in its position properly complete all as specified and as directed.

Material and labour for dismantling exhaust fan of any size from its position, dismantling blade, opening the fan motor, removing the burnt grease, applying new bearing grease, removing wornout bearing,burnt winding and cleaning the slot,rewinding with super enamelled copper wire of suitable size ,varnishing ,heating and insulating including fixing new ball bearing/bush, hanging in its position properly complete all as specified and as directed.

Material and labour for checking the ceiling fan clamps /split pin.rubber bushes ,canopy condition and replace the above items if found unserviceable to ensure safety of hanging of ceiling fans at CGRA qtrs/OTM accn complete all as specified and as directed. Note: The rate by the tenderer shall be inclusive of cost of clamps/split pin/rubber bushes/canopy etc

Supply and fix Louvers suitable for exhaust fan of 300 mm sweep with protection mesh and without shutter to avoid birds entering including taking down unserviceable louvers and taken as credits complete all as specified and as directed.

Supply and fix LED security light fitting 18W 5700K made up of pressure die cast housing with toughened glass with optics/diffuser IP66 protection complete including taking down unserviceable security light fittings of any type any watts and taken as credit complete all as specified and as directed Make: C&S Cat No LTESSE-18WLED or equivalent in Wipro/Philips

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor FRLS PVC insulated cable 1100 volts grade single core ,consealed drawn into and including PVC conduit of 20 mm dia ISI Marked (IS-9537 Part III) along with 1.5 sqmm unsheathed multi stranded copper conductor FRLS PVC insulated cable 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof and including sunken type pressed terminal boxes MS sheet with 3mm thick plastic white cover plates with frame for various modules for mountling switches, socket, fan regulators etc complete for one light point controlled by one modular switch complete all as specified and as directed. Note: Make of PVC copper conductor cable:- Finlex/Poly cab/ Asian. Make of PVC conduit : Avon plast/ Kon seal / Garware.

Supply and lay LT UG , XLPE insulated, heavy duty electric cable with multistranded aluminium conductor with galavanised steel wire/tape 1100 volts grade of cross sectional area 16 sq. mm, 4 core in trenches / on truss / wall / floor through pipe with laying of MS cable root indicator of minimum 2 feet support height at distance of 10 m and along the juction of changing direction clamps including taking down old one and taken as credit complete all as specified and as directed.Make:Gloster/CCI/Asian

All as per item no :115 here in before but of size 25 sqmm 4core

All as per item no :115 here in before but of size 35 sqmm 4core

All as per item no :115 here in before but of size 50 sqmm 4core

Removing surplus soil to a distance n. exc 50 m and depositing at a level n. exc 1.5m above the starting point, complete all as specified and directed .

Supply and laying of Double walled corrugated High density polyethylene pipe (DWC - HDPE pipe) of 120mm/103mm Dia (outer Dia/ inner Dia) with all bends, angles having corrugated on the outer wall and plain having corrugation on the outer wall and plain surface inner wall conforming to IS 14930 part-I and part-II complete with necessary HDPE fittings for protection of 1.1 KV grade under ground cable directly in ground at a depth of 60 cm including excvation and refilling the trench etc as required complete all specified and as directed.

Supply and laying of cable jointing kit for 1.1 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 4 core XLPE armoured aluminium conductor cable of size 16 sqmm to 35 sqmm complete all as specified and as directed.Make:Denson/M seal

Supply and laying of cable jointing kit for 1.1 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 4 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and as directed.Make:Denson/M seal

Supply and fix (in replacement) MCCB 4 pole, 415 volts on panel/wall/board mounted type with breaking capacity 16 KA and directed of capacities 63A including disconnecting the incoming / outgoing cable connections and re-connecting with suitable aluminum lugs / ferrules etc., after taking out the existing unserviceable MCCB and making good the disturbed surface for following capacity:- Make:Siemen/ABB/Scheneider

Supply and fix (in replacement) MCCB 4 pole, 415 volts on panel/wall/board mounted type with breaking capacity 16 KA and directed of capacities 100A including disconnecting the incoming / outgoing cable connections and re-connecting with suitable aluminum lugs / ferrules etc., after taking out the existing unserviceable MCCB and making good the disturbed surface for following capacity:- Make:Siemen/ABB/Scheneider

Supply and fix (in replacement) MCCB 4 pole, 415 volts on panel/wall/board mounted type with breaking capacity 16 KA and directed of capacities 125A including disconnecting the incoming / outgoing cable connections and re-connecting with suitable aluminum lugs / ferrules etc., after taking out the existing unserviceable MCCB and making good the disturbed surface for following capacity:- Make:Siemen/ABB/Scheneider

Material and labour for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 63 mm thick, burried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised earth strip of 32x6mm by means of bolts,nuts check nuts and washers of GI all as shown in electric plate No 3 connecting to earthing test point including necssary exacavation in any earth strata , PCC chambers in PCC 1:2:4 type B1, RCC 1:2:4 chamber cover with 6mm dia MS bar at 100 mm centre to centre both ways and MS 6mm dia hook and as per plate No 5 of SSR part 1 connecting test point and testing on completion complete and all as specifed and as directed . Notes:-The rates quoted is inclusive of galvanised earth strip of 32x6mm conductor upto a length of 7.5m from the earth pit. .

S KUMARAN