PERIODICAL SERVICES TO EXTERNAL WALL SURFACES, INCLUDING CHAJJA REPAIRS AND REPAIR TO EXTERNAL WALL PLASTER OF ZONE C (OTM AREAS) AT INS SHIVAJI LONAVLA.

M&L for complete removal of old smoke, shoot,moulds,vegetation, moss and efflorescent salts and trading oil and greasy spots from surface areas using high-pressure water jet spray technology pressure (5000-10000)PSI , as part of surface preparation for repainting. by skilled labour complete all as directed by Engineer-in-Charge.Note-: Rates are inclusive all scafoldings used for up to the height of 15m.then providing and applying one coat of fungisidal solution followed by crackfilling and applying one coat of Exterior Primer Followed By Two coats of exterior emulsion weatherproof anti-fungal paint No Dust Exterior Emulsion of Desired Shade.Make-Nerolac,Asian,Berger,Dr Fixit,or Equivalent

M&L for complete removal of old smoke, shoot,moulds,vegetation, moss and efflorescent salts and trading oil and greasy spots from surface areas using high-pressure water jet spray technology pressure (5000-10000)PSI , as part of surface preparation for repainting. by skilled labour complete all as directed by Engineer-in-Charge.Note-: Rates are inclusive all scafoldings used for up to the height of 15m.then Providing and applying one coat of fungisidal solution followed by crackfilling and applying one coat of Exterior Primer Followed By One coats of exterior emulsion weatherproof anti-fungal paint No Dust Exterior Emulsion of Desired Shade.Make-Nerolac,Asian,Berger,Dr Fixit,or Equivalent

M&L for Preparation of old plastered surfaces of walls,ceiling,Pillars, cornices etc by brooming down with steel wire brush, scraping down smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface up to 15M height from fgrond level complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for preparation of old painted wood surfaces of any description having width/ girth execeeding 10cm and apply one coat of synthetic enamel paint complete all as specified & as directed.Note-: Pricing are inclusive all scafoldings used for up to the height of 4 storeys.

Material and labour for Mild steel deformed or twisted bars ( TMT) 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for additional reinforcement bars in place of more than 1/3 corroded reinforcement bars incl the charges for cutting bending placing and fixing in position using Lok-fix (Manufactured by M/s fosroc chemicals India ltd) including the cost of all materials labour cost of steel bars and scaffolding complete all as specified and directed by the EIC

Supply only Integral liquid water proofing compound conforming to IS-2645-2003 complete all as specified.

Chipping, removing carefully loose plaster/Hard concrete by low impact hammer without damaging the structure including cleaning and disposal of malba outside premises complete all as specified and as directed by Engr-in charge.Note-: Pricing are inclusive all scafoldings used for up to the height of 4 storeys. Note: Hard concrete should not be removed by force.

Providing and fixing special water tight formwork to chajjas, troughs and similar items on all locations including beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies including edges complete all as specified and directed.Note-: Pricing are inclusive all scafoldings used for up to the height of 4 storeys.

Material and Labour for clean existing reinforcement with wire/rotary wire brush making the surface free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer confirming to ASTM B 117 on the rebars including cleaning the reinforcement wire brushing to remove loose rust spalls with time intervals of 1 hour between coats complete all as specified and as directed by Engr-in charge.Note-: Pricing are inclusive all scafoldings used for up to the height of 4 storeys.

Material and labour to carryout of application of Bi-polar migratory corrosion inhibitor EPCO -KP-100 on concrete surface complete all as specified and as directed by Engr-in-charge.Note-: Pricing are inclusive all scafoldings used for up to the height of 4 storeys.