REPAIR/MAINT AND IMPROVEMENT OF LT NETWORK INCLUDING LT PANEL, FEEDER PILLAR BOXES, LT OH LINES, UG ELECTRIC CABLES, STREET LIGHTS, SECURITY LIGHTS AND ALLIED WORK UNDER ZONE D AREA AND REPAIR/MAINT AND IMPROVEMENT OF LT FEEDER PILLAR BOX/PANEL BUS B

Amount

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, laying cable etc and getting out soft / loose soil complete.

Returning filling with earth obtained from excavation including spreading, watering and consolidation in layers not exceeding 25 cms thick complete.

Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete.

M&L for sand cushioning to under ground cable in trenches in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as specified and directed by Engr in charge. Note:- Measurement shall be taken after gentling puning of sand.

Supplying and laying reinforced precast concrete cable cover class LV type 1 with flat size 250 mm x 150 mm x 40 mm complete all as directed.

Supplying, laying or fixing or passing through pipe, testing and commissioning, XLPE insulated, steel strip / wire armoured heavy duty electric underground cable, 1100 volts grade with stranded aluminium conductor of following nominal cross sectional area :- Make :- Polycab/Havells or equivalent

10 sqmm 2 core.

16 sqmm 4 core.

25 Sqmm, 4 core

25 Sqmm, 3.5 core

35 Sqmm, 3.5 core

50 sqmm 3.5 core.

70 sqmm 3.5 core.

95 Sqmm 3.5 core.

120 Sqmm 3.5 core.

150 Sqmm 3.5 core.

185 Sqmm 3.5 core.

240 Sqmm 3.5 core.

300 Sqmm 3.5 core.

M&L for dismantling of old unserviceable aluminium conductor off sizes from existing overhead line complete all as specified and directed

S&F steel tubes light grade galvanised with all fittings fixed to walls/ floors/ poles/ road crossing etc of following sizes complete all as directed:-

40 mm bore

50 mm bore

80 mm bore

Supply and fixing in replacement of LED street light fitings 45 Watt IP 66 pressure die cast aluminium housing and heat resistant toughened glass including taking down existing unsv light complete all as specified and directed. Make :- Orient electric Cat Part No LSFS-045-C or equivalent to Polycab/C&S/Bajaj.

Supply and fixing in replacement of LED street light fitings 60 Watt IP 66 pressure die cast aluminium housing and heat resistant toughened glass including taking down existing unsv light complete all as specified and directed. Make :- Orient electric Cat Part No LSFS-060-C or equivalent to Polycab/C&S/Bajaj.

Supply and fixing in replacement of LED street light fitings 70 Watt IP 66 pressure die cast aluminium housing and heat resistant toughened glass including taking down existing unsv light complete all as specified and directed. Make :- Orient electric Cat Part No LSFS-080-C or equivalent to Polycab/C&S/Bajaj.

Supply and fix in replacement sheet moulding compound junction box shock and rust proof, termite resistant, tamper proof single phase, two wire rating of size 250 mm x 200 mm x 105 mm complete with one no. MCB SP 6 Amp including non metallic clamps and GI nut bolts and washers of suitable size and fixed on pole /wall complete. Make:- Sintex Cat part No GSJB 2520 or equivalent in Hensel/ABB.

M&L for replacement of street medium bracket made out of 40mm dia medium grade GI Pipe of 1.2mtr length & bend to reqd shape suitable for fixing street light/ security light on pole/wall including two nos clamps with nuts & bolts including taking down existing unsv bracket complete all as speicified.

Material and labour for GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI strip of size 32x6 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 40 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit), PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in earth pit including 40mm thick RCC cover with reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.

Material and labour for Earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level ) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI wire 4.0 mm as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and incl 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and chaarcoal filling, necessary excavation and earth work complete.

Supply,installing,testing and commissioning in replacement of indoor double door type cubical LT panel suitable for 3 phase,4 wire 415 volts made out of 2 mm thick & size 1700x1200x450mm MS sheet, dust & vermin proof duly supported on 40 x 40 x 6 mm angle iron frame, having a place to fit (on PVC/Wooden board) 12 Nos Single phase electric meter complete with locking arrangement and opening arrangement from front & rear both duly fitted with compression cable glands for entry & exit of cables, powder coated with two coats and having minimun clearance of 450 mm above ground level complete and comprising of the following : - (a) Panel mounted 3 phase volt meter,ammeter -01 set each (b) Aluminium bus bar --- 03 Nos. For phase of capacity 200 Amp and 1 Nos 200 Amps for neutral, duly taped in colour coded FRP sleeves. (c) Indicating lamps Red, Yellow and blue in colour, LED type complete with lamp holders, 220 volts AC.- 01 Set of 3 (d) Panel wiring with 2.5 Sqmm PVC Sheathed, PVC insulated FR-HR stranded copper conductor cable through MCB DP 10 A mounted on DIN rail. (e) MCCB 100 Amp , 4 pole, 415 V , 16 KA - 01 Nos (f) DP RCBO 25 Amp ,100mA,10KA - 12 No (g) SPN MCB 10 Amp-01

Supply, installing, testing and commissioning outdoor in replacement of double door type cubical feeder pillar box made out of 3mm thick and size 800x600x300mm MS sheet, dust & vermin proof duly supported on 40 x 40 x 6 mm angle iron frame complete with locking arrangement and opening arrangement from front & rear both duly fitted with compression cable glands for entry & exit of cables, powder coated with two coats complete and comprising of the following : - (a) Panel mounted 3 phase volt meter,ammeter -01 set each (b) Aluminium bus bar --- 03 Nos. For phase of capacity 200 Amp and 1 Nos 200 Amps for neutral, duly taped in colour coded FRP sleeves. (c) Indicating lamps Red, Yellow and blue in colour, LED type complete with lamp holders, 220 volts AC.- 01 Set of 3 (d) Panel wiring with 2.5 Sqmm PVC Sheathed, PVC insulated FR-HR stranded copper conductor cable through MCB DP 10 A mounted on DIN rail. (e) TPN 63 Amp , 4 Pole, 415 V , 16 KA - 02 Nos

S&F in replacement of MCCB 4 pole 250 Amp 415 Volts, adjustable thermal megnetic type breaking capacity 16kA Complete fixing arrangement. Make :- Havells/C&S/HPL or equivalent

S&F in replacement of MCCB 4 pole 200 Amp 415 Volts, adjustable thermal megnetic type breaking capacity 16kA Complete fixing arrangement. Make :- Havells/C&S/HPL or equivalent

S&F in replacement of MCCB 4 pole 160 Amp 415 Volts, adjustable thermal megnetic type breaking capacity 25kA Complete fixing arrangement. Make :- Havells/C&S/HPL or equivalent

S&F in replacement of MCCB 4 pole 100 Amp 415 Volts, adjustable thermal megnetic type breaking capacity 25kA Complete fixing arrangement. Make :- Havells/C&S/HPL or equivalent

S&F in replacement of MCCB 4 pole 63 Amp 415 Volts, adjustable thermal megnetic type breaking capacity 16kA Complete fixing arrangement. Make :- Havells/C&S/HPL or equivalent

S&F PVC insulated FRLS unsheathed copper conductor cable of size 1.5 sqmm multistranded twin core 1100 volt grade Complete all as specified and directed.

M&L for stay assembly complete with MS stay plate 300x300x6mm thick galvanized stay rod not less than 20mm dia, 2.15 M long galvanized stay bow, galvanized thimble,stay clamp etc. all as shown in electrical plate No1of SSR part-I Note:- Excavation,earthwork,cement concrete loop type insulators and stay wire shall be included in the item rates.

Supply and fixing in replacement of LED flood light 150 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant with driver and lamp.complete all as specified and directed. Make :- Orient/C&S/Polycab/CG or equivalent.

M&L for taking down unserviceable LED street/ security/flood light fittings of any type/wattage/make etc fitted on LT poles, High Mast light poles, building etc for repairing including complete dismantling, checking for repair/replacement of unserviceable parts as required and making the LED light fittings operational to give rated illumination by replacing unserviceable spare parts and refixing the same at existing location or any other location as directed at site and making electrical connections to existing wire complete all as directed.

Supply only following items to be incorporated against item No 27 here in before:

Electronic LED driver suitable for LED street light fitting capacity 30/45 Watt make and specification as installed at site.

Electronic LED driver suitable for LED street light fitting capacity 60/70 Watt make and specification as installed at site.

Supply and fixing in replacement of MCCB 630Amp rating,4-pole 415V, Electronic release with overload and short circuit adjustable type breaking capacity 36 KA. Make :-Havells/C&S/HPL or equivalent

Supply and fixing in replacement of MCCB 400Amp rating,4-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 36 KA. Make :-Havells/C&S/HPL or equivalent

Supply and fixing in replacement of MCCB 250Amp rating,4-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 36KA. Make :-Havells/C&S/HPL or equivalent

Supply and fixing in replacement of MCCB 100Amp rating,4-pole 415V, adjustable thermal adjustable megnetic type adjustable thermal adjustable megnetic type breaking capacity 16KA. Make :-Havells/C&S/HPL or equivalent

Supply and fixing in replacement of MCCB 250Amp rating,3-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 35KA. Make :-Havells/C&S/HPL or equivalent

Supply and fixing in replacement of MCCB 200Amp rating,3-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 35KA. Make :-Havells/C&S/HPL or equivalent

Supply and fixing in replacement of MCCB 160Amp rating,3-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 25KA. Make :-Havells/C&S/HPL or equivalent

Supply and fixing in replacement of MCCB 100Amp rating,3-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 25KA. Make :-Havells/C&S/HPL or equivalent

Supply and fixing in replacement of MCCB 63Amp rating,3-pole 415V, adjustable thermal adjustable megnetic type breaking capacity 16KA. Make :-Havells/C&S/HPL or equivalent

M&L Galvanised stay strand, size 7/4mm complete

Dismentling of unservicebale GI wire/stay wire complete.

Dismantling / taking down old unserviceable pin/loop/shackle type insulator any type / size.

Dismantling unserviceable any size of cross arms and anti climbing devices from pole /structures. complete all as specified and directed.

M&L for ACSR conductor any sizes drawn over for over head lines fixed to insulators with binding wire after allowing specified sag complete all as specified and as directed by Engr-in-Charge.

M&L for GI wire 4mm dia as continuous earth wire, guarding and craddles to OH line including binding wire complete all as specified and as directed by Engr-in-Charge.

Supply & fixing pin type porcelain vitreous insulator 100 mm height and 65 mm dia for 1100 Volts grade including galvanised mild steel spindle, one nut and two washers complete all as specified.

Supply and fixing shackle type insulator porcelain vitreous white,brown and green of size 75 mm heaight and 90 mm dia incl galvanised MS straps 31x3 mm size ,washers,insulator bolt 12 mm dia and nut for working pressure 1100 Volts grade complete all as specified.

M&L for loop insulator, vitreous, porcelain, white, brown or green, large size with overall dimensions 50x140mm clearance of hole 25.5 mm complete.

M&L for work confirming to Fe-410-O or Fe-310-O as in cross arms, support, bracings, stiffeners, clamps channels fabricated from structural steel including nuts, bolts and washers welding, bending cold or hot drilling holes for bolts in any shape or size all as directed including two coats of aluminium paint over a coating of red oxide primer all as directed by Engr-In-Charge.

M&L for Cable route indicator showing "LT Cable" and route/joint of cable with arrow made of PCC M-15 grade (Nominal mix) using 20 mm gaded stone aggregate duly rendered with plaster 10 mm thick of size 400x500x200mm fixed and erected on PCC plateform of sixe 400x400x100mm goruted in grounts duly painted on both sides with LT Cable Route complete all as diected.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material (Epoxy Based) and accessories suitable for 3½/ 4 core XLPE armoured Al conductor cable of size 10 to 16 Sq mm complete all as specified and as directed.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material (Epoxy Based) and accessories suitable for 3½/ 4 core XLPE armoured Al conductor cable of size 25 to 50 sq mm complete all as specified and as directed.

Supply and fix cable jointing kit for 1100 KV grade cable for straight through joint complete with Jointing material (Epoxy Based) and accessories suitable for 3½/ 4 core XLPE armoured Al conductor cable of size 70 to 150 sq mm complete all as specified and as directed.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material (Epoxy Based) and accessories suitable for 3½/ 4 core XLPE armoured Al conductor cable of size 185 to 400 sq mm complete all as specified and as directed.

M&L for scraping, scretching, cleaning the old paint, preparation of the surface for repainting. Painting LT 09 Mtr long steel tubular pole with two coats of aluminium paint and writing pole Nos. including applying of coat of cement base paint on PCC muff all as directed by Engr-In-Charge.

M&L for scraping, scretching, cleaning the old paint, preparation of the surface for repainting. Painting LT 9 Mtr long PCC pole in Black & White strip 30 Cm a part alternaterly up to 1.5Mtr height from ground level with synthetic enmel paint, writing pole Nos. & applying one coat of cement base paint on PCC muff & remaining portion of the pole all as directed by Engr-In-Charge.

M&L for dismantaling of old/unserviceable PCC poles/struts any type and size.

Supply & install steel tubular swaged pole type 410 SP -31 (9 Mtr long) complete with CI base plate and finial including foundation with following work: (a). Excavating in post holes (or similar holes) each n.exc 0.5 cum each, getting out in soft/loose soil, returning filling in and well ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and disposal of surplus soil to a distance not exceeding 50 m and making good surface. (b) PCC M-7.5 grade (Nominal mix) using 40 mm graded stone aggregate in base (0.90m x 0.60m x 0.15m height) as in lean concrete. (c) PCC M-10 grade (Nominal mix) using 40 mm graded stone aggregate in foundation filling & mass concrete of size 0.60m x 0.60m x 1.5m height. (d) PCC M-15 grade (Nominal mix) using 20 mm graded stone aggregate as in coping (0.45m x 0.60m 0.45m height) including necessary formwork. (e) M&L for applying two coats of aluminum paint over a coat of red oxide primer and making alternate colour bands of black & yellow colours in 30 cm width upto a height of 1.5 mtr from pole coping with synthetic enamelled paint complete. (f) M&L for applying one coat of bitumenous paint to tubler pole below GL.

Supplying and fixing in replacement of feeder pillar box out door type made out of MS sheet of 3.15 mm thick with alluminium busbar, duly powder coated & mounted on angle iron frame made out of size 50x50x6mm, 90 cm high consisting of the following accessories and make as approved by GE from approved list:- (a)MCCB 415 volts 400 Amp 4 pole . 36 KA adjustable type ---01 Nos (For incoming) (b) MCCB 415 volts 250 Amp.4 pole 36 KA adjustable type ---01 Nos (for outgoing) complete. (c)MCCB 415 volts 125 Amp.4 pole16 KA adjustable type ---03 Nos (for outgoing) complete. (d)LED indicating lamp cluster type set of three colour in RED/BLUE/ GREEN- 01 Sets complete. (e)Digital multifunction meter with volmeter (0-500V), Ampmeter (0-250) & frequency meter- 01 Nos complete. (f)Grouting of panel 60cm above GL, embedded in PCC M-15 grade (Nominal mix) using 20 mm graded stone aggregate up to 30 cm complete.

M&L for GI strip of size 32x6mm as earth continuity conductor burried in ground or drawn in pipe or fixed to wall on saddle.

M&L for Copper strip 20x3mm as earth continuity conductor burried in ground or drawn in pipe or fixed to wall on saddle.

M&L for earth continuity conductor galvanised iron wire 4 mm dia .

Supply and fixing GI funnel complete with wire mesh for earthing water pipe.

M&L for earth pit cover of size 450x450x50mm thick of RCC M-15 (Nominal mix) using 20mm graded stone aggregate with MS TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering /cladding to wall with self tapping screws complete.

M&L for framed work as in MS sheet section, hinges, angle iron etc complete confirming to Fe-410-O or Fe 310-0 all as specified and directed by Engr-in-Charge.

Stringing of existing overhead LT line ACSR conductor of any size opening /dismenting of jumpers and ACSR conductors from insulators and connecting after stringing inclusing required ACSR conductore/ connectors of following span of conductors :-

Span of two/three ACSR conductors of any size

Span of four /five ACSR consutors of any size

Cutting wild grass, bushes, creaper, unwanted vegetation from inside / surrounding of E/M installations, near transformers, pole structures etc including cutting creapers from barbed / cattle fencing of the installations as when directed and removing of unwanted material from installation compound and depositing where directed. (Note : (a) The item shall be operated maximum three times in entire period of contract in the same installations. (Area measured separately each time).

Labour & tools for trimming tree branches upto 100 mm girth of any location around existing HT/LT OH lines giving clearance of 1.5 m on all sides complete. (Note:- Trimming of tree branches irrespective in numbers in each tree shall be measured as one unit).

M&L for painting and minor repair to LT panels including welding work/repair to door/ hinge etc as required at site complete all as specified and as directed

shyam construction

M/S S S CONSTRUCTION

ASHOK INFRATECH

Ms Kamal Kant Agarwal