Karnataka

Active

Works

Electrical

Supply and Erection of Highmast Light in 1. Shanshinagar Dod masijid, 2. Wad no. 32 Rahmathnagar tarza dilwala darga, 3. ward no 31 Rahmathnagar masijid Axa compound, 4. ward no. 30 Illal Masijid noor nagar, 5. Gandhinagar, 6. mochicolony,7. Petechmanahalli, 8 Viranjaneya Nagar 2nd Stage and 9.Beedi Colony of Kolar Town

Kolar Urban Development Authority

KLRUDA Commissioner Office Kolar | Kolar, Karnataka

Amount: ₹34.1 LCloses: 6 Jul 2026

Tender Value

₹34.1 L

EMD Value

₹65,314

Closing Date

6 Jul 2026, 10:30 pm

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Kolar Urban Development Authority

Work Description

Supply and Erection of Highmast Light in 1. Shanshinagar Dod masijid, 2. Wad no. 32 Rahmathnagar tarza dilwala darga, 3. ward no 31 Rahmathnagar masijid Axa compound, 4. ward no. 30 Illal Masijid noor nagar, 5. Gandhinagar, 6. mochicolony,7. Petechmanahalli, 8 Viranjaneya Nagar 2nd Stage and 9.Beedi Colony of Kolar Town

Tender Information

Tender ID

307846

Reference Number

KLRUDA/2026-27/EL/WORK_INDENT9

Tender Type

Open

Product Category

Electrical

Location

KLRUDA Commissioner Office Kolar

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredBESCOM/PWD Registration Certificate

RequiredWork done Certificate

RequiredLINE OF CREDIT

RequiredAssessed available tender capacity

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditional tenders will not be accepted

Tenderers are required to read the Bid Documents carefully before submission of their bid.

Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected.

As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27-07-2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund.

The Employer reserves the right to reject any or all Tenders without assigning any reason or what so ever

The earnest money deposit will be forfeited if the documents submitted by the tenderer found to be misleading/forged or fake

Financial turnover of previous years shall be given a weightage of 10% per year to bring them to the price level of the 2026-27

Turnover certificate from CA with valid UDIN No. to be furnished along with necessary documents

Royalty on construction materials and other taxes will be deducted as per prevailing Govt., orders as may be modified from time to time

Bidder has to quote rates excluding GST, GST shall be paid separately as per applicable

All the Work done certificate uploaded should include E-procurement indent number

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

Past Experience

Achieved in at least two financial years an average annual financial turnover of Rs.40.00 Lakhs (usually not less than the estimated cost under this contract) in last five years 2021-22 to 2025-26

Audited CA Certificate of Annual Turnover

satisfactory completed as a prime contractor (50% of the cost of the work) such as Supply and erection of highmast value not less than Rs.20.00 Lakhs( including GST) last five years i.e., 2021-22 to 2025-26

Work Done Certificate

Liquid assets and or availability of credit facilities of no less than Rs.9.80 Lakhs (Credit lines/ letters of credit/ certificates from banks for meeting the fund requirement etc

Line of Credit

Capabilities of Vendor

BESCOM/PWD/Registered contractors

PWD Registration Certificate (Class I/II/III/IV)

Assessed available tender capacity

Others -- Assessed available tender capacity

Fee & Financial Details

Tender Fee Amount

₹860

EMD Fee Amount

₹65,314

Important Dates

Last Activity

20 Jun 2026

Published

20 Jun 2026

Bid Opening

8 Jul 2026

Download Ends

3 Jul 2026

BOQ Preview

•

Earth work excavation for Foundation by mechanical means for all works &

•

depth upto 3 m, as per drawing and technical specifications, including setting

•

out, shoring, strutting, barricading, cau...

•

Providing and laying in position Cement Concrete for levelling course for

•

all works in foundation. The granite/trap/basalt crushed graded coarse

•

aggregates and fine aggregates as per relevant IS...

•

Providing and laying in Cement Concrete for all Basement & surface level

•

works, return walls, retaining walls, sunken floors etc. The granite/trap/

•

basalt crushed graded coarse aggregates and fi...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

•

including cost of all materials, machinery, labour, cleaning, straightening,

•

cutting, bending, hooking, laping/welding joints, ty...

•

Fabrication,Supplying,Erection,TestingandCommissioningof......mslongPolygon highmast with Single/Multiple telescop icsection shaving, (minimum overlapdistanceof1.5 timesof topsection) thicknessasperBS...

•

SupplyofLEDfloodlight luminairewithpressurediecast aluminium housing

•

body for optimal thermal dissipation.Lamp compartment comprising ofanti

•

glare clear diffuserwithInjectionmoulded polycarbonate/clea...

•

Fabricating supplying and mounting MSboxmade out ....SWG

•

suitableforfloor /wallmounting, fullyweather proofwith provision

•

for better heat dissipation, provided with hinged front cover,

•

equipped with t...

•

Supplyandfixingof3polepowercontactorwithNO/NCcontacts on

•

existing wood/panel board using necessarybolts, nuts, washers

•

and wiring etc., complete with AC-3 Rating and as per IS-13947.100A( vol 6 pg ...

•

Supplyingand fixingangle iron framework fabricatedout ofM.S.

•

angle iron.. andM.S. Flat......withbolts,washers etc., andpainted

•

with 2 coats of red oxide and then two coats of approved paint.( vol 6 pg...

•

GI/Copper strips for grounding connections, usingnecessary fixing

•

materials as required. GI/Copper strips 25 x 3 mm GI strip ( Vol 6 pg no 54 it no12.58.2)

•

Supplying, fixing,wiring,earthelectrodeforgroundingconduits, I.C.

•

cutouts andother equipment'son themeter boardusing40mmdia

•

2.90mmthickGIpipe2.5mlongburiedinapit .Thepit shouldbe

•

filledwithequalpropor...

•

Supplying and drawing Flexible Multicore Cable manufactured with

•

electrolytic grade flexible copper with low conductor confirmingto

•

IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for

•

Supplying & fixing of Porcelain fuse channel with cut out on

•

existing wooden/panel using necessary nuts, bolts and washers.( vol 6 pg no 14 it no 5.7.4)

•

Supplying and fixing Microprocessor Based Astronomical timer

•

Switch with using necessary bolts, nuts and washers.( vol 6 pg no 21 it no 5.48)

•

SupplyingandfixingMouldedCaseCircuitBreaker(MCCB)overthe

•

existing wood/panel board using necessary screws, bolts, nuts,

•

necessaryphaseseparators,handleandwiringcomplete.Protectionof

•

OverloadandShort c...

•

SupplyinganddrawingFlexibleMulticoreCablemanufactured with

•

electrolyticgradeflexiblecopperwithlowconductor confirmingto

•

IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for

•

working voltage u...

•

Supplying 4mm thick white plastic plate and covering for

•

junction boxes of size ...... mmconduit using necessarymachine

•

screws. 80/90 mm ( vol 6 pg no 9 itno 3.10.2)

•

1.1 kV, XLPE or Heat resistant PVC

•

insulated, PVC exutruted Inner Seath

•

Armoured LTUG Cable as per IS-1554 (Part

•

1) or IS-7098 Part-1, Armouring strip

•

thickness and resistivity as per IS-3975 50 ...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using

•

Wooden/Aluminum Rollers as directed by the departmental staff LT Cable UG CABLE 35 to 95 Sqmm

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

HIGHMAST.doc

Tender Document • 0.31 MB

Ready to Participate?

Download all tender documents and submit your bid