ADDN/ALTN TO 24 DUS AT DK I AND DK II UNDER GE CENTRAL AT DELHI CANTT

Amount

Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MoD land), complete all as specified and directed.

Demolition of cement concrete (un- reinforced) of any description and in any position not otherwise specifically provided etc including removal of rubbish out side complex (MoD land), complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) including removal of rubbish outside complex ( MoD land), complete all as specified and directed.

Taking down of cement plaster of any description, complete all as specified and directed.

Taking up or down 15 mm dia GI tubing and connections including cleaning for re-fixing, complete all as specified and directed.

All as per item No. 5 above but 20 mm dia.

Demolition of Brick work of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (without taking off shutters from frames), complete all as specified and directed.

Taking down chowkats or frames exc. 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutters from frames ), complete all as specified and directed.

Taking down shutters of any description exc.1 Sqm and n.exc 2 Sqm complete all as specified and directed.

Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish,vegitation outside complex (MOD land), complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed stoneware, Asbestos Cement or reinforced concrete) set in cement mortar, internal dia of pipe 100 mm, complete all as specified and directed.

Dismantling floor, hearth tiles incl cement mortar bedding (but not backing) removing serviceable tiles and rubbish out of premises, complete all as specified and directed.

Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Taking down existing steel rolling shutter incl hood cover pull & push type not exc 12 Sqm area of clear opening and cleaning the sides of shutters suspensions shafts,anti-guide channels and greasing all the moving parts of rolling shutters and straightening rolling shafts and replacement of bolts and nuts as required for smooth functioning of shutters and refixing the same incl hood cover complete all as specified and directed.

Disconnecting existing water tanks, setting aside (or lowering if required) for cleaning,repairing and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes and reconnecting and refixing in position for tanks capacity exc 250 and n.exc 500 Ltr complete all as specified and directed.

Disconnecting existing water tanks, setting aside (or lowering if required) for cleaning,repairing and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes and reconnecting and refixing in position for tanks capacity exc 500 and n.exc 1000 Ltr complete all as specified and directed.

Dismantling of 100 mm dia cast iron pipe (soil/waste/vent) with fittings etc fixed to walls,ceiling, on floors & from trenches if required including taking out any type of joints complete all as specified and directed.

All as per item No. 19 above but 75mm dia.

M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished fair and even without using extra cement, complete all as specified and directed.

M&L for forming construction joint 75mm deepx10mm wide filled with sealing compound Grade A complete all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors finished, surface even and smooth without using extra cement, complete all as specified and directed.

S&F glass dividing strips, 38mm wide and 3mm thick and inserted in position to conform to design complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:1.5:3 type B-2 (using 20mm graded stone aggregate) as in floors finished, surface even and smooth without using extra cement, complete all as specified and directed.

Material and labour for cement concrete 1:5:10 type E2(using 40mm graded stone aggregate) as in filling in sunken floors of toilets complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 with two coat of tape create mixed (1:2) with cement paste @ 500 gm per sqm as per manufacturere instruction in sunken portion of toilets, finished even and smooth without using extra cement and applying a coat of hot blown bitumen 85/25 grade as the rate of 0.70 kg per sqm and applying one coat of hot blown bitumen 85/25 grade at the rate of 2.6 kg per sqm and one layer of 0.5mm thick fibre tissue over it and finally third layer of hot blown bitumen 85/25 grade at the rate of 2kg per sqm including getting out, complete all as specified and directed.

S&F 15mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors, shall be painted with bituminous paint of approved quality,The pipes should not come in contact with lime mortar or lime concrete as pipes are affected by lime etc complete all as specified and directed.

All as per item No. 28 above but 20 mm dia.

Refixing 15 mm bore medium grade GI tubing with all fittings fixed to wall and ceiling or laid in floors complete all as specified and directed.

All as per item No. 30 above but 20 mm dia.

S&F in repairs PVC (SWR) pipes double socket in any length with rubber ring joints, fixed to walls 110mm mm dia ,in four storey building complete all as specified and directed.

S&F in repairs PVC (SWR) pipes double socket in any length with rubber ring joints, fixed to walls 75mm mm dia ,in four storey building complete all as specified and directed.

S&F in repairs PVC (SWR) bends of any radius (110mm bore) including jointing with solvent cement complete all as specified and directed.

S&F in repairs PVC (SWR) junction double,(double T, 110 mm bore), equal or unequal , including jointing with solvent cement complete all as specified and directed.

S&F in repairs PVC (SWR) junction double,(double T , 75 mm bore ), equal or unequal complete, including jointing with solvent cement complete all as specified and directed.

S&F in repairs 75mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs PVC (SWR) vent cowl of 110 mm bore complete all as specified and directed.

S&F in repairs PVC (SWR) vent cowl of 75 mm bore complete all as specified and directed.

S&F in repair pvc floor trap square type with Cockroch Proofing CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and directed.

S&F in repair Salt Glazed Stone Ware (SGSW) gully traps square or round mouthed type size 150x150mm including excavation/earth work, bed concrete, surrounding concrete and CI grating complete all as specified and directed.

S&F in repair brass chromium plated tubuler towel rail 20mm dia D type ISI marked 60cm long between flanges including a pair of CP brass brackets complete all as specified and directed.

S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified and directed. Make:- Cera (Cat part no. F1001151),Prayag (Cat Part no. 9106), Somany (Cat Part No. 272211150041) or equivalent

S&F in repairs chromium plated brass angle valve suitable for 15mm bore pipe complete all as specified and directed. Make:- Cera (Cat part no. F1001201),Prayag (Cat Part no. 9011), Somany (Cat Part No. 27221150041) or equivalent

S&F in repair chromium plated brass angle valve dual type suitable for 15mm bore pipe, complete all as specified and directed.

S&F in repair 15mm dia chromium plated wall mixer hot & cold L bend 3 IN 1 pattern fixing and connection to pipes complete all as specified and directed. Make:- Cera (Cat part no. F1001411),Prayag (Cat Part no. 9175), Somany (Cat Part No. 200080031) or equivalent

S&F in repair 15mm dia brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB complete all as specified and directed. Make:- cera (Cat part no. F1001101),Prayag (Cat Part no. 9802), Somany (Cat Part No. 272211027011) or equivalent

S&F in repair 15mm dia brass chromium plated Sink mixer for mixing hot and cold water screwed down for iron pipe and fixed to Kitchen sink including taking out existing mixer complete all as specified and directed. Make:- cera (Cat part no. F1015501),Prayag (Cat Part no. 9855), Somany (Cat Part No. 272201140061) or equivalent

S&F in repairs CP Brass shower rose 125 mm size suitable for 15mm bore pipe complete all as specified and directed. Make:- cera (Cat part no. F7010506AB),Prayag (Cat Part no. BOS905), Somany (Cat Part No. 272180320031) or equivalent

S&F in repair Stop Valve 20mm dia cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions complete all as specified and directed.

S&F in repair Stop Valve 15mm dia cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions complete all as specified and directed.

S&F in repair stop valve 15mm dia fancy type chromium plated with long shank and cap (concealed type) complete all as specified and directed.

S&F in repair health faucets with crutch or push handle, screwed down with 1.5mtr PVS flexible pipe, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy. Chromium plated long body complete all as specified and directed.

BLANK

S&F in repair standard of PTMT bib tap, fancy type with flange, 15 mm dia screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs glass corner 300 mm radius of 10mm thick toughned glass with CP Brass railng, fixed with screws fancy type complete all as specified and directed.

S&F in repair PVC mirror cabinet made of high intensity polythene of biggar size 500 x 400 x 120 mm complete all as specified and directed.

S&F CP connection pipe of 15mmx 450mm with CP check nuts with washers complete all as specified and directed.

S&F in repair vitreous China coloured European type WC Floor mounted (single piece) including connection to drain, 'S' trap and fixing bolts, plastic water closet seat cover complete all as specified. Make- CERA Cat Part no. CIMONA,Size 700X350X760mm,Cat Part no. S1013122,S trap 300mm,Prayag-4360 or equivalent.

S&F in repair 10 ltrs capacity PVC colour low level flushing cistern with PVC flush pipe 32mm dia complete all as specified and directed. Make:- Cera Cat part no. B10201013; Prayag - 508 or equivalent

S&F in repair vitreous chinaware coloured oval shape wash hand basin (WHB) size 550mm x 400mm complete, Ist quality, including provision of pair of mild steel angle iron brackets of suitable size duly painted and cutting for and pinning in ends of brackets in walls & making good & including providing and fixing of suitable waste pipe and waste fitting complete all as specified and directed. Make:- Cera Cat part no. S2020155; Prayag - 4656 or equivalent

S&F in repair vitreous china squatting pan of orrissa pattern, of size 580x440 mm , 1st quality, long pan white with "p"or "S" trap front or back inlet and integral footrest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified and directed. Make : Cera Cat pot No -S3030101

S&F in repair brass chromium plated toilet paper holder complete all as specified and directed. Make:- Cera (Cat part no. F5004110),Prayag -BA38, Somany (Cat Part No. 27213033091) or equivalent

S&F stainless steel gratings 100mm bore size fixed with cement motar complete all as specified and directed.

S&F in repair brass chromium plated soap dish complete all as specified and directed. Make:- Cera (Cat part no. F5004106),Prayag -BA15, Somany (Cat Part No. 27213033051) or equivalent

S&F in repairs brass chromium plated towel rack 600 mm size including a pair of CP brass bracket complete all as specified and directed. Make:- cera (Cat part no. F5003101),Prayag -BA12, Somany (Cat Part No. 272130330101) or equivalent

S&F in repair tie hanger 250mm long, stainless steel body complete all as specified and directed.

S&F in repair stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe including connecting union overall size 1145mm x 510mm x 200mm with bowl size 510mm x 400mm x 200 mm including taking out existing china ware sink with waste fittings complete all as specified and directed.

S&F in repairs Stainless Steel plate rack (Gde-304)of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plate rack complete all as specified and directed.

S&F in repair stainless steel peg set of 06 peg, 45 centimeter long complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with brass chromium plated bracket guard and railing 60cm long complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4 complete all as specified and directed.

M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6 complete all as specified and directed.

Cutting holes in brick wall built in cement mortar for inserting hold fasts, depth of embedded postion of hold fast /lugs measured from the face the jambs into the wall exc half brick but n.exc one brick thick and making good the dismantaled portion in cement mortar 1:3 or in cement concrete 1:2:4 type B-1, using 20mm graded stone agg complete all as specified upto six storey height.

S&F mild steel work as in hold fast 25x3mm flat iron and similar articles conforming to Fe-410-0 complete all as specified and directed.

M&L precast reinforced cement concrete 1:1.5:3 type B-1 (using 20mm graded stone aggregate) as in shelves, Manhole cover landings, cover slabs, chullah hoods, chajjas, water trough and similar articles including form works , set in cement mortar 1:4, complete all as specified and directed. (Note:- reinforcement to be measured & paid separately).

S&F factory made solid PVC wire gauged door shutter 35mm (styles) consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded prelaminated PVC C channel having a prelam PVC sheet strip of 20mm with stuck inside with solvent cement for stiles and prelam PVC sheet for top, lock and bottom rail on either side and as gap insert for top rail and bottom rail. The wire gauge shall be stainless steel alloy wire cloth 0.36mm nominal dia of wire and average aparature 1mm, wrapped on an additional square 8mm MS solid tube and this tube shalll be welded to MS tube and wire gauge shall be stretched to tighten firmly complete all as specified and directed.

S&F factory made solid PVC moulded door shutter 35mm thick (styles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm thick prelam PVC sheet on back face complete all as specified and directed.

S&F fibre glass Reinforced Plastiic (FRP) door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be coverec with fibre glass from all sides . MS stay shal be provided at the bottom to steady the frame complete all as specified and directed.

S&F FRP Door shutter shall 30mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacturer . Made with retardant grade unsaturated Poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitble blocks of seasoned wood inside at required places for fixing of fittings , cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 complete all as specified and directed.

M&L Solid PVC double door frame (Factory made) of size 50mm x 95mm made out of 5mm plain colour PVC sheet reinforced with MS tube, Supplying & Fixing in opening complete all as per specifications and as per drawing on Sl page No 150 of SSR (Part -II).

M&L for 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed.

M&L for 2nd class hardwood plain fillets, square , rectangular or triangular in section, wrought, sectional area exc 13 Sq.cm and n.exc 25sq.cm fixed with screws complete all as specified and directed.

M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat, complete all as specified and directed.

S&F 30 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face pannel, commercial type on both sides. Flush shutters shall have teak wood edging complete all as specified and directed.

S&F 35mm thick 2nd class Hard wood rail & style (factory made) plain, framed, panelled shutter (two panel) with lock rail & panel of 12mm veneered particle board with commercial veneering on both sides. The size of rail & style as per IS :1003 (Part I), Kiln seasoned & chemicals pressure treated complete all as specified and directed.

S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door(Hollock) and window stop and the like, including all necessary labour, article n.exc 200 cu cm each wrought complete all as specified and directed.

S&F 50 mm long (size) butt hinges medium weight, cold rolled, mild steel, complete all as specified and directed.

S&F 100 mm long (size) butt hinges, stainless steel with brass/bronze hinge pin, complete all as specified and directed. Make: Kich Cat no: DH235S or equivalent

S&F in repairs stainless steel handle of size 200mm size long complete all as specified and directed.

S&F stainless steel handle of size 200mm size long complete all as specified and directed.

S&F stainless steel handle of size 150mm size long complete all as specified and directed.

S&F stainless steel handle of size 200mm size long complete all as specified and directed.

S&F in repairs 150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black complete all as specified and directed.

S&F in repair 300mm long, stainless steel of AISI 316 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed complete all as specified and directed.

S&F 300mm long, stainless steel of AISI 316 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified and directed.

S&F in repairs stainless steel of AISI-316 grade barrel tower bolt 200 mm long, extruded section, complete all as specified and directed.

S&F stainless steel of AE - SI 316 grade barrel tower bolt 200 mm long , extruded sections complete all as specified and directed.

S&F stainless steel of AE - SI 316 grade barrel tower bolt 150 mm long , extruded sections complete all as specified and directed.

S&F in repairs stainless steel of AISI 316 grade floor door stopper with hard drawn steel spring 140mm long complete all as specified and directed.

S&F stainless steel of AISI 316 grade floor door stopper with hard drawn steel spring 140mm long complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified upto two storey height.

S&F Hasp and staple, 100mm size, safety type, Stainless Steel hinge pin including bolt to hinge plate & fixed with screws,complete all as specified and directed.

S&F continuous (Piano) hinges, Stainless steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm, complete all as specified and directed.

S&F 40mm dia, cup board knobs fixed with nuts, screw and washer of brass polished , complete all as specified and directed.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with steel wire staples, complete all as specified and directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed stainless steel wire staple, complete all as specified and directed.

S&F 4 mm thick plain sheet glass and glazing , in square n.exc 0.5 Sqm in each pane, complete all as specified and directed.

S&F 5.5mm thick sheet glass ordinary quality in square n.exc 0.50 sqm each including grinding of edges for crockery cupboard including taking out old/broken glass with roller, complete all as specified and directed.

S&F in repair double aluminium channel size 10x20x2mm, complete all as specified and directed.

S&F MS roller with "C" shape stapple, chromium plated for 5.50mm thick sheet glass, complete all as specified and directed.

S&F mild steel 300mm ordinary rat tail, rod pattern, springs including roller and roller plate complete all as specified and directed.

S&F brass chromium plated magic eye complete all as specified and directed.

M & L cutting out bricks ,forming toothingwork including value of new materials enterig old walls and jointig and pointing in cement mortar 1:4 (meassured on verticle surface in contact with old wall only) complete all as specified and directed.

S&F in repairs stainless steel of AISI 316 grade 100 mm size mortice lock vertical type, 4 levers with key in duplicate,incl 2 no suitable handle fixed to shutters with screws complete all as specified. Make: Kich Mortice Lock MLB7S or equivalent

M&L for Easing of door shutters for easy closing/opening, tightening of hinges or changing the position of hinges adjustment of tower bolts/sliding bolts etc area exc 1sqm but n.exc 2 Sqm each, complete all as specified and directed.

M&L for 15 mm thick internal rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick external rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement and mixed with water proofing compound, making good by existing colouring complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid separately)

Supply only integral water proofing admixture of approved quality complete all as specified and directed.

M&L for 5 mm thick rendering in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:3 with WPC on concrete surfaces of chajja and like surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L form work to chajja, weather shade, troughs and similar items including edges for rough finished surfaces of concrete flat, complete all as specified and directed.

M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor, roof and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n.exc 10 cm wide for rough finished surfaces of concrete, complete all as specified and directed.

M&L for reinforced cement concrete 1:1.5:3 type B-1, (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on walls, landing, balconies, shelves and like, complete all as specified and directed. (Note:- Reinforcement & form work shall be measured & paid under respective items).

S&F MS framed work such as grills, gratings etc with ends of bars shouldered and or riveted, framed guard bars, barred iron doors, ladders, frame work of water trough, railings,cooler stand and similar work to conforming to Fe -290,Gde-E-165, complete all as specified upto 2 storey height.

S&F TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) , not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and directed.

M&L for Preparation of old decorated surfaces(Plastered or unplastered) of wall including cornices, pillasters applying two coats of white lime washing, complete all as specified and directed.

M&L for Preparation of old decorated surfaces(Plastered or unplastered) of ceiling including cornices, pillasters etc and applying two coats of white lime washing, complete all as specified and directed.

Complelte removal of existing old treatment on surface from walls with machenical grinder (machine) as per specification of manufacturer of pains/OBDs, complete all as specified and directed.

M&L a coat of alkali resistant primer over alread prepred surface of walls complete all as specified and directed.( Item is executed in stage and passed.)

M&L for preparing the entire surface with applying 2-3 mm thick birla/ JK wall care putty on walls surface finished even and smooth complete all as specified and directed.Putty to be procured directly from manufacture.(Item is executed in stage and passed.)

M&L for applying two coats of oil bound distemper on old wall surface with roller brush complete all as specified and directed. (Item is executed in stage and passed.)

M&L for Preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for Preparation of old painted wooden surfaces of any description, over 10 cm width or girth, not otherwise described, and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for Preparation of new surfaces (Plastered or un-plastered) on ceiling and applying three coats of white lime wash, complete all as specified and directed.

M&L for Preparation of new surfaces (Plastered or un-plastered) on wall and applying three coats of white lime wash, complete all as specified and directed.

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper(white or tinted) over a coat of 3mm thick wall care putty on plastered surfaces, complete all as specified and directed.

M&L for Preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of surfaces of wood and wood based materials steel and iron work , new or old , treating small articles such as stop ,covers,gully gratings ,hold fasts,ends of posts, back of chowkats etc area not exceeding 0.10 Sqm each treated with tar or coal tar black paint complete all as specified and directed.

M&L for Preparation surface of wood or wood based materials, new or old of any description and girth and treating with two coats creosote to back of ply wood, complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified and directed.

M&L for cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in bedding to drain pipe 150 mm dia including packing under, and haunching against the sides of the pipes after they are laid and tested including form work to sides of concrete complete all as specified and directed.

M&L for Reinforced concrete pipes class NP2,laid and joint complete with collar drain pipes 150 mm laid in trenches and jointed complete all as specified and directed.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified and directed.

Removing excavated materials to a distance exc 1.50 Km but not exc 5 Km outside defence land and depositing where directed.

Cement concrete 1:3:6 type C-2(40mm aggregate ) as in foundation manholes complete all as specified and directed.

Cement concrete 1:2:4 type B-2 (40 mm graded aggrigate ) as in surface channels and drains complete all as specified and directed.

Cutting into existing manholes for connecting new drain, making good to pipe and rendering, cutting out existing benching and forming branch channel (half round or ¾ section) in cement concrete 1:2:4 type B-1, smooth finished and re-forming benching as required for 100mm dia pipe, complete all as specified and directed.

M&L for rectified coloured ceramic tiles 300x600 x 7 to 8mm thick, as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for rectified coloured ceramic tile 300x300x6-8 mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for polished Vitrified tile ultra charge, 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

All as per item No 154 above but over and including 10mm thick rendering in CM 1:4 as in skirting complete all as specified and directed.

S&F 6mm thick plywood with 5 Nos of ply, grade BWR, type BB, fixed with screws to timber frame work etc, complete all as specified and directed.

S&F factory made 18mm thick single extruded WPC (Wood Polymer Composite) solid board having density not less than 600kg/cum one side white & other side of board laminated with PVC foil including finishing all edges at all level for making edge lipping at all 4 edges using binding tape solvent,screws,stainless steel, piano hinges/self closing box type hinges etc complete all as specified and directed.

S&F PVC 18/19mm thick PVC moulded solid board, one side prelaminated for cabinet boxes,shutters etc. with shelf and shutters full size fitted under /above kitchen cooking platform and other platform complete all as specified and directed.

S&F factory made PVC kitchen and cupboard frame of the size 75mmx40mm with a wall thickness of 4mm, made out of extruded 4mm thick prelam PVC sheet reinforced with 15mmx15mm MS tube of 19 gauge thickness througout the fame and mitre cut at two corners and jointed with 2 Nos of 150mm long brackets of 10mmx10mm MS tubes.The door frame shall be fixed to the wall using 65/100mm long MS screw through the frame by using PVC fastners . A minimum of 4 Nos. of screws to be provided for each vertical member and minimim 2 Nos for Horizontal members complete all as specified and directed.

S&F in repair stainless steel drapery Rod 25mm dia make and model of vista, including Stainless steel side caps, brackets, complete all as specified and directed.

Providing and injecting chemical emulsion for post construction anti-termite treatment along the external wall below concrete or masonary apron using chemical emulsion 2.25 litres per RM including drilling and plugging holes etc in apron with Cement mortar 1:2 to match the existing apron, complete all as specified and directed.

Providing and injecting chemical emulsion for post construction anti termite treatment in walls & Floors at point of contract or wood work by chemical emulsion (in oil or kerosene based solution) 0.5 ltrs/hole by drilling 6 mm dia holes at a downward angle at 45 degree at 150 mm centre to centre sealing the same, complete all as specified and directed.

M&L for chipping out spilled and loose concrete cover and derusting steel reinforement of concrete column, beam, slab, chajjas, parapets and the like as directed upto 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforecement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 53 grade and two part of gaggar sand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out upto 10 metre height) complete as directed at site. Note :- (a) After placing the additional reinforecement all concrete surfaces shall be throughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer). (c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account. (d) E2 design Approval by Chief Offfice.

M&L Cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof kerbs or mud stops etc including weathering slightly rounded or chamfered edges, finished even and smooth without using extra cement including form work , complete all as specified and directed.

M&L for 16 to 18mm thick machine cut uniform tecture Udaipur green stone flooring over 20mm thick screed bed in cm 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing, laid in designed complete all as specified and directed.

M&L for 16 to 18mm thick uniform tecture Udaipur dark green marble laid over15mm thick screed bed in cm 1:6 as in treads of steps in one piece including cutting, jointing, moulding and granite polishing, laid in designed complete all as specified and directed.

M&L for one coat of plastic emulson paint including preparation of old painted surfaces of brick/stone/concrete surfaces complete all as specified and directed.

Providing and fixing factory made uPVC any colour sliding window Three track of area n exc. 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with multi chamber, Frame (88mm x 52mm), Sliding sash (42mm x 67mm), Sliding mesh sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm).Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 + 0.2mm thick galvanised steel frame (30mm x 18) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasterners. Hardware (Touch lock of zinc alloyed (any colour powder coated), steel roller system, Stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm and required accessories) complete all as specified and directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.

S&F 4mm thick pin headed glass panes used in anodised aluminium glazed/gauzed windows and ventilators shutters complete all as specified and directed.

S&F Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed.

M&L for Black Granite slab 20 mm thick rubbed and polished machine cut, set in cement mortar jointed with white cement complete including bedding layer 15mm thick in cement mortar 1:6 over cooking platform & making hole for gas pipe etc through precast RCC slab & granite stone etc incl rounding of exposed edges, complete all as specified and directed. Note:- Colour of Granite approved by the direction of Garrison Engineer.

S&F in replacement steel rolling shutters ,1.25mm thickness of laths,without ball bearing, as specified including top cover, anchoring rod, hasp and staple, and one shop coat of primer, erected in positionas indicated, complete push pull or manual type complete all as specified and directed.

S&F in replacement steel rolling shutters ,1.25mm thickness of laths,without ball bearing, as specified including top cover, anchoring rod, hasp and staple, and one shop coat of primer, erected in positionas indicated, complete gear operated type with bevel gear box and crank handle complete all as specified and directed.

S&F in repairs mild steel hood covers exc 6m but n.exc 12 Sqm for rolling shutter made out of mild steel sheets 1.00mm thick incl bending the sheet to the required shape and fixing the same in the rolling shutters bracket plate incl one coat of red oxide primer and two coats of synthetic enamel paint complete all as specified and directed.

S&F in repairs roller ball bearing (ISI marked) for 50/40 mm dia pipe shaft complete all as specified and directed.

S&F in repairs mild steel lock plate & handles made of of Flat iron 35 X 5 mm incl welding and painting with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F in repairs mild steel helical wire springs (confirming) as to IS-6248-1970) for shutters not exc 12 Sqm complete all as specified and directed.

S&F in repairs 3.15mm thick mild steel bracket plate hexagonal or circular in shape incl welding complete all as specified and directed.

S&F in repairs MS Black pipe 40mm dia medium grade for rolling shutters shaft incl drilling holes for fixing springs and welding to MS brackets plate complete all as specified and directed. (Note: MS brackets plates shall be measured and paid for separately).

S&F in repairs mild steel pully for 32 mm/40mm dia pipe (of approved make) for rolling shutters complete all as specified and directed.

S&F in repairs mild steel clips (Local name Chidiya) made out of 1.00mm thick MS sheet and revetting the same to the existing steel lath of shutters complete all as specified and directed.

S&F in repairs if inter locking lath section formed from rolled MS strip 1,2mm thick for rolling shutters above 3.5m width complete all as specified and directed.

S & Fin repair 1000 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I complete all as specified and directed.

S&F in repair 500 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I complete all as specified and directed.

S&F steel windows including pressed steel frame made of 1.25 mm thick MS sheet of size 125x60 mm double rebated with side hung shutter both glaze,gauge and guard bars of 12mm square bars placed horizontally/vertically @ 125mm C/C ,including box type hinges steel handless and peg stay ,tower bolts and including glaze/gauge and guard bars dovetailed or welded ,incl one shop coat of red oxide primer ( wire gause and glass pan shall be measured seperately ). InclM&L for providing PCC 1:2:4 (12.5mm graded stone aggregate) to fill the frame and making good complete all as specified and directed.

M&L in repairs Providing precast cement concrete type B-0 1:2:4 set in cement mortar 1:4 (12.5mm graded aggregate) louvres and jallies, 40 mm thick (mea sured solid), including all moulding complete all as specified and directed.

S&F (Fe 410-W(Gde-E250)quality-A) Framed work as in Doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing and painting complete all as specified and directed.

M&L 75 mm PCC(1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor and filling as mass conc. complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block with gray cement and no pigment any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

S&F in repairs PVC (SWR) bends of any radius ( 75mm bore) including jointing with solvent cement complete all as specified and directed.

S&F Pre-painted galvalume aluminum Zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for preparation of new plastered surfaces as of walls and applying Two coats of weather proofing exterior acrylic emulsion paint over one coat of primer from the same manufacturer white lime wash complete all as specified and directed.

M&L for roof treatment as per the description below:- (a) Plain cement concrete average 50 mm thick 1:2:4 type B0 (using 12.5 mm graded stone aggrigate) for levelling course for providing slope in the roof @ 1:40 gradient (b) Apply bituminous primer @ 0.3 ltr/Sqm (conforming to IS-3384) on prepared surfaces. After drying of primer apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm of prepared surfaces. (c) Laying APP (Atatic Polypropylene) modified five layered membrane 3 mm thick and weighing not less than 4 Kg/Sqm with centre core 160 GSM/ Sqm ; core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrane shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specification And apply two coat of silver aluminum paint .

S&F Modular Kitchen trolly/Basket cupboard and cabinate Confirming to Stainless steel of AISI grade 304 as per size Required for complete all as specified and directed.

M&L for telescopy channels 22" long fixed in cupboard complete all as specified and directed.

M&L Ready Mix Plaster of 15mm thick on brick or concrete surfaces including necessary cement slurry with bulk density 1.4 to 1.7 kg ,water ratio 17 to 19% by weight & compressive strength as per IS-4031 Part-6 applied as per manufacture instruction. Note:- Contractor shall have to deposit empty bags to the store yard of Engr-In-Charge before claiming any payment.

Providing & fixing factory made UPVC white colour casement/sliding door two track, made of extruded profile. Profiles of frames & sash will be metered cut & fusion welded at all corners,including drilling of holes for fixing hardware & drainage of water etc.Making arrangement for fixing of hardware,EPDM gasket 1.2+0.2mm thick galvanised steel profile to be inserted in required profile,frame will be fixed to the wall with 8mm X100mm long fasteners,all complete as specified & directed.

M&L for Complete removal of existing treatment of old surface of wall scrubbing by mechanical SC rapper (machine) with hard brushing,brooming down or steel wire brushing scraping down smoke root mould moss & efflorescent salts & treating oil & greasy spots as applicable & washing with water & applying 2-3mm wall care putty & two coats of weather proofing exterior acrylic emulsion paint with top coat of weather proof paint with long life over one coat of primer from same manufacture white lime wash all even & smooth with roller brush complete all as specified and directed.

Description of Work / Item(s)

Amount

Taking down carefully copper/aluminium point wiring (light/fan/ socket/power) complete from the wall by cutting/ chasing including fittings and fixtures such as switches, ceiling roses, pendants holder, regulators,sockets,light fittings etc for credit and making good the disturbed surfaces of wall, floor etc complete all as specified and directed.

Taking down carefully sub main wiring of any description complete all as specified and directed.

Taking down defective switch fuse main board /MCCB Enclosure/ distribution iron clad or sheet metal enclosure/ MCB DBs with MCBs of any capacity and make including wooden board etc complete all as specified and directed.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified and as directed for the followings:-

One light /fan point controlled by one, one way switch .

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.

One bell point controlled by one bell push.

One light point controlled by two Nos two way switches

All as per item No. 4 here-in-before but with 4 Sqmm cable for one 3 pin 15 Amp switch socket outlet and using 4 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified and directed. Note for items 4 & 5: (i) In case the wiring is encountered with any beam/column, then the wiring will run on PVC casing/caping to avoid any damage to the RCC portion. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling fan point wiring, in this specified portion wires shall run through the surface new conduit shall be provided as mentioned in note (i) above. (iii) Proper colour code will be used for wiring as per the electrical rule and as directed by EIC.

M&L switch Modular type 6 Amps 230V AC complete all as specified and directed.

M&L switch modular type 6 amp SP two way complete all as specified and directed.

M&L Modular socket outlet 5 pin 6 Amp socket 2 module complete all as specified and directed.

M&L switch bell push Modular type 6 Amps 1W-1 module, 230V AC complete all as specified and directed.

M&L switch Modular type 16 Amps 230V AC complete all as specified and directed.

M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified and directed.

Supply & Fix Modular five stepped type electronic fan regulator 2 module 360 degree rotatable type 230V AC complete all as specified and directed.

M&L for Point wiring with PVC unsheathed multi stranded copper conductor cable 1.5 sqmm (nominal dia ) 1100 volts in new PVC concealed conduit and new MS steel terminal boxes not less than 1.6 mm thick of required size (factory made) terminal boxes and with top cover of 3 mm thick hylam sheet of white colour including one run of 1.5 Sqmm FRLS 1100 Volts copper conductor cable (green colour) as earth continuity connected to common earth for one light point complete all as specified and directed by Engr-in-Charge for the followings:- Note: (i) In case the wiring is encountered with any beam/column, then the wiring will run on PVC casing/caping to avoid any damage to the RCC portion. (ii) No cutting shall be done in the roof for laying PVC conduit for ceiling fan point wiring, in this specified portion wires shall run through the surface new conduit shall be provided as mentioned in note (i) above. (iii) Proper colour code will be used for wiring as per the electrical rule and as directed by EIC.

One light /Ceiling fan/exhaust fan/ bell point controlled by one switch.

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board

One 3 pin 5 Amps socket outlet point controlled by one No one way switch on Ind board

M&L switch piano flush type 5 amp SP one way ISI marked complete all as specified and directed.

M&L socket outlet 5 Amps 5 pin flush type ISI marked complete all as specified and directed.

S&F fan regulator electronic step type 5 steps piano type, one module connecting complete all as specified and directed.

S&F ceiling rose, 3carbonate, isolated body with three terminals complete all as specified and directed.

M&L bell electric (ding dong) 230 volt, SP complete all as specified and directed.

S&F sheet metal enclosure single pole and Neutral with a two pin earth plug top and socket complete with a MCB SP 20 Amp, "C" Curve 220 volts, 50 Hz, 10KA breaking capacity complete all as specified and directed.

S&F in replacement of LED batten luminaire surface mounted, 4 feet system wattage of 20/22 Watts, > 2400 systems lumen outputwith lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

S&F in replacement of LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1000 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.

S&F in replacement of decorative type wall mounted luminaire with unbreakable poly carbonate materials with 1x14 watt LED bulb B22 Base complete all as specified and directed.

S&F in replacement of LED 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6000K, Surge protection of 2.5 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

S & F in replacement of surface ceiling mounted, round LED down light fitting 12 watts with die cast aluminium housing and system wattage of 12W, system efficacy at luminary level ≥ 80 Lumens/watt, 50000 burning hours, 6500K color temperature with CRI >80, Power Factor > 0.90, Driver should meet IEC compliant for safety with multi stage high Isolate CC-CV operated driver with voltage variation range - 150 to 270 Volts AC, and surge protection of 2.5 KV, and including connecting up with PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

M&L for angle Lamp holder with metalic ring, pvc/ polycarbonate type back plate with LED bulb 09 watt, 900 lumens out put, 6500K suitable for B-22 base complete all as specified and directed.

S&F 30W High efficient LED Street light fitting with pressure die cast Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie should more than 80lm/W. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on wall fixed complete all as specified and directed.

Disconnecting electric & water supply connections, nuts-bolts of geyser and after repairing fix and test the same to the satisfaction of Engr-in-charge/GE complete all as specified and directed.

S&F water heater storage type (Geyser) vertical type of capacity 25 ltr having heating element 2 KW and not less than 5 star rating, with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection, having adjustable knob for temperature control and inner tank should be glass line coated with ABS body complete all as specified and directed.

Disconnecting elect connection and taking down of ceiling fan / Exaust fan of any make and any height, dismantling blade and removing fan alongwith blade for depositing in MES store yard complete all as specified and directed.

Disconnecting elect connection and taking down of ventilation fan of any make and any height, dismantling blade and removing fan alongwith blade for depositing in MES store yard complete after cleaning and repairing, fix the same to the satisfaction by Engr- in- Charge.

S&F ceiling fan three blade, robust and reliable inverter motor (brush less DC Motor) powdered by ECM technology, BEE 5 star rating for energy saving ISI mark, rated Air delivery>220cum/min, service value>6 AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible coper cable pvc insulated of suitable length complete all as specified and directed. Note: BLDC fan must operate on exisitng electronic fan regulator.

S&F wall mounted fan 400 MM , 3 blade white colour, 230 Volts, 50 Hz 1420 RPM with 90 degree oscillation and having speed control by 2 pull cord system complete all as specified and directed.

Supply and fixing Ventilating Fan 250 mm sweep, 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz and connecting up complete including louvers and provision of copper cable 3 core of size 0.5 sqmm complete all as specified and directed.

S &F heavy duty exhaust fan 300 mm sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor from ceiling rose to fan, length as per requirement at site complete all as specified and directed.

S&F MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as specified and directed.

S&F MCB SPN 40 to 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed.

S&F MCB SP 6 - 32 Amps 240 volts 10 KA 50 HZ 'C' curve complete all as specified and directed.

Supply, and drawing in concealed New PVC conduit not less than 20 mm dia medium duty incl 02 runs of single core 04 Sqmn (for main current& Neutra) and one run single core 04 Sqmm (As earth wire) of multi stranded FRLS conductor copper conductor PVC insulated unsheathed. 1100 votls, ISI marked for sub main wiring complete all as specified and directed.

Supply, and drawing in concealed New PVC conduit not less than 20 mm dia medium duty incl 02 runs of single core 06 Sqmn (for main current & Neutral) and one run single core 06 Sqmm (As earth wire) of multi stranded FRLS conductor copper conductor PVC insulated unsheathed. 1100 votls, ISI marked for sub main wiring complete all as specified and directed.

Supply, and drawing in new PVC concealed conduit not less than 25 mm dia 02 runs of single core 10 Sqmn (for main current& Neutra) and one run single core 10 Sqmm (As earth wire) of multi stranded FRLS conductor copper conductor PVC insulated unsheathed. 1100 votls, ISI marked for sub main wiring complete all as specified and directed.

S&F factory made epoxy powder coated distribution board (MCCB DB) TPN 4 way vertical type, IP-43, protection made out of min1.6mm thick CRCA sheet, Fabricated, metal double door fixed to wall and suitable for universal monting and including 200 Amps rated copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plated with knockouts and incl MCCB 100 Amps as incomer and confirming to IS : 8623 complete all as specified and directed.

Supply and fix in repair MCCB 100 Amps, FP 415 volts 25 KA 50 HZ with thermal magnetic setting complete all as specified and directed.

M&L for fixing of GI tubing medium grade 40 mm bore fixed to wall / ceiling for hanging of ceiling fan (Approx length- 2.3 RM) including suitable size of fan hook as per site requirement and cement work including making good the disturbed surface with existing surface complete all as specified and directed.

Supply, installing, testing and commissioning factory made and tested LT Panel Indoor type, platform mounted of size: 800 X 200 X 1200 mm ( LxWxH ) suitable for 415 Volts 3 Phase and neutral, 4 wire, 50Hz AC supply system having bus bar chamber with insulated electrolytic Copper bus bars of capacity 250 Amps rating installed on DMC insulators with bus bar chamber. The panel shall be dust and vermin proof, IP-42 and made out of 2.00 mm thick CRCA mild steel sheet Wall mounted type, front opening type with aprons for cable entry, with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size but not less than 4 sqmm. All steel metal works including frame shall be with anticorrosive coating with seven tank process and finally epoxy polyester powder coating of Siemens grey RAL- 7035 shade complete all as specified and directed.. The scope of work also comprising of the following:- BUS BAR CHAMBER:- (a) 250 Amp TPN, Copper conductor, with color coded heat shrinkable sleave and shall be mounted on non hygroscopic, non combustible, track resistant, high strength DMC material, interconnection of all incomings & outgoings.

M&L earthing complete with GI electrode 600x 600 x 6mm, thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level (with top edge of earth plate not less than 1.50 mtr below normal ground level connected to GI strip 32x6mm as earthing lead by means of bolt nuts, check nuts, and washers of brass connected including gun metal or phosphorus bronze of size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25 mm long hexagonal head screwed all as specified including excavation and earth work and disposal of surplus soil incl 40 mm GI tubing light grade and necessary fitting for protection of GI strip incl laying of alternate layer of charcoal dust and common salt PPC (1:2:3) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x 6mm MS angle iron frame for cover 40 mm thick (1:2:4) type B20 using 12.5 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm C/C both way with MS handle 20mm dia plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally PGL funnel with ground wire mesh 20mm dia GI pipe Medium grade for watering complete all as shown on electrical plate No 3 of SSR Part-1 2009 and connected in earth test incl testing completed all as specified and directed. Note:- Galvanised strip and protection light grade GI pipe upto 7.5 mtr shall be deemed to be in the rates.

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recessed or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc of size 32x6 mm thick galvanised strip with duly fixed on suitable size of porcelain/ PVC insulator complete all as specified and directed.

V r traders

Mohit Infratech

imran construction company

imran construction company

VED PRAKASH ARORA

Mohit Infratech