REPAIRS PAINTING POLISHING TO VAREIOUS TYPES OF STEEL WOODEN FURNITURE AT OTM MD ACCN UNDER GE GOLCONDA

Amount

M&L for painting one coats of synthetic enamel paint of approved shade both internally and externally to the following furniture articles of MES pattern Viz F/FD/DB series or similar items including removing of dents applying putty to level the surface before painting all as specified/directed and shown on drawings. Note :- Painting workshall be executed where the furniture exist in different user units of OTM, MD Accn including BSO's Furniture yard under the Jurdication of GE Golconda etc complete all as specified and directed.

(a) Almirah Steel Med/Small (all types)FD-87,243,1032,114 ,1034,1030

(b) Almirah Steel Large FD-67,1031,104,1033

(c) Locker steel FD-257,1029

(d) Chair steel tubuler with Arms FD-75 (M)

(e) Chair steel tubular without Arms FD-75 (M)

(f) MNF set Complete FD-214,246,220

(g) Form with Back FD-78,322,F-8

(j) Form without back FD-77,F-7,1027

(k) Ladder for loft FD-449,238

(l) Table dining OR's FD-165

(m) stool steel FD-81

(n) Safe meat FD-47(M),369

(o) Stand wash Hand FD-12,36,DB-12

(p) Table pantry FD-25,255

(q) Teapoy verandahFD-25,255

(r) Table office clerk steel FD-84(M),1004

(s) Table office officer steel FD-84 (M),1003

(t) Table bed side steel FD-157(M)

(u) Table Bed side with Cup Board HF-246

(v) Bench with Back steel with desk 54 " long ( Dual Desk) TP

(w) Book shelf open small steel FD-69

(x) Book shelf open large steel FD-69

(y) Table 900 X 600 X 760 mm with Drawer FD-1008

(z) Table 900 X 600 X 760 mm without drawer FD-1007

(aa) Table 900 X 900 X 760 mm FD-1009

(ab) Chair Verandah FD-19,256,259,359

(ac) Rack steel with shelves and open all sides 6'3' X 3'6" X 2'4" FD-129,TP

Material and labour for one coat of french polishing to the following furniture article of MES pattern Viz F/FD/DB series or similar items including appying wax for depressed surfaces before polishing all as specified and shown on drgs and directed by Engineer in-charge. Note :-Polishing work will be executed where the furniture exist in different user units of OTM, MD Accn under the Jurdication of GE Golconda including BSO Funrniture yard as directed by Engr-in-charge

(a) Almirah large all types DB-4116,4049

(b) Almirah Medium all types DB-3959,4042

(c) Almirah Mess utensils DB-25A,FD-93

(d) Bed Ply wood top FD-246,247

(e) Desk of various sizes DB-3032

(f) Book case/Book shelf all types DB-4071,3957,4221,2121,FD-237,88

(g) Bin Soild linen DB-3981,FD-244

(h) Chair without Arms (all types) Fd-275,225,16,228,279

(j) Chair with Arms (all types but except Chair Easy ) FD-280,20,202

(k) Chair Easy FD-229,17,20

(m) Stool Dressing CB DB-8980,FD-282

(n) Sofa Set 4 Seater complete FD-281,373

(o) Side Board FD-226

(p) Table dining 6/8 Pers , Table 1520 X 860 X 760mm FD-30,239,273,139,376,CEHZ/FD-12,FD-139,289

(q) Table 900 X 600 X 760 mm with & without Drawer /Table 900 X 900 X 760 mm/Table 600 x 600 X 760 mm FD-95,293,88,41,,291,42,55,,223,224,231,291

(r) Table Bed side FD-28,248,276

(s) Table centre FD-235

(t) Table Dressing gents FD-230

(u) Table dressing ladies FD-230,284

(v) Table Peg FD-230,284

(w) Table writing Med/study DB-4119,3982,FD-84,275,33,34,249

(x) Teapoy DB-4069,2375,FD-232

(y) Form without back ( all types) FD-77,F- 7

(z) Form with Back ( all types) FD-78,322,F-8

(aa) Locker Bed side wooden DB-4074,FD-54

(ab) Teapoy DB-3975,FD-24,232,278,382

(ac) Hat stand (small) FD-23,2096,233,361

(ad) Sofa Set 5 Seated complete FD-281/373

(ae) Bed Hard with MNF Set FD/MAP/01

(af) Stool 2' High F-2,DB-26865

S&F in repairs 125 mm long MS steel chromium plated handle for almirah steel large and medium all as specified/directed and as shown on drg. Drg No. FD-67/1031/68/1032 Note: Quoted rate is inclusive of Gas welding including grinding the surface to smooth finish.

Removing old u/s lock and S&F new Brass lock 6 levers Make Godrej with duplicate keys complete all as shown on drg and as specified & directed. Drg No. FD-67/1031 Note: Quoted rate is inclusive of Gas welding including grinding the surface to smooth finish.

Removing old u/s corner clips and S&F new corner clips made out of 3mm MS plate made to shape and size complete all as shown on drawing and as driected. Drg No. FD-67/1031/68/1032 Note: Quoted rate is inclusive of Gas welding including grinding the surface to smooth finish.

Removing old u/s shelf of almirah large carefully and S&F new shelf made out of MS sheet 1mm thick bent to shape and welding the same properly in position including two coats of synthetic enamel paint first quality olive green over a coat of red oxide primer after preparation of new steel surface complete all as specified/directed and shown on drg. Drg No. FD-67/1031 Note: Quoted rate is inclusive of Gas welding including grinding the surface to smooth finish.

Removing old u/s shelf of almirah medium carefully and S&F new shelf made out of MS sheet 1mm thick bent to shape and welding the same properly in position including two coats of synthetic enamel paint first quality olive green by spray painting over a coat of red oxide primer after preparation of new steel surface complete all as specified/directed and shown on drg. Drg No. FD-68/1032 Note: Quoted rate is inclusive of Gas welding including grinding the surface to smooth finish.

Removing old u/s door single leaf door carefully and S&F new door single leaf for almirah large made out of MS sheet 1mm thick bent to shape and welding the same properly in position including two coats of synthetic enamel paint first quality olive green by spray painting over a coat of red oxide primer after preparation of new steel surface complete all as specified/directed and shown on drg. Drg No. FD-67/1031 Note: Quoted rate is inclusive of Gas welding including grinding the surface to smooth finish.

Removing old u/s door single leaf door carefully and S&F new door single leaf for almirah medium made out of MS sheet 1mm thick bent to shape and welding the same properly in position including two coats of synthetic enamel paint first quality olive green by spray painting over a coat of red oxide primer after preparation of new steel surface complete all as specified/directed and shown on drg. Drg No. FD-68/1032 Note: Quoted rate is inclusive of Gas welding including grinding the surface to smooth finish.

Removing old u/s legs and S&F new legs made out of MS sheet 1.25 mm thick of size 485x70x100 mm for almirah large made to shape as shown on drg and fixed in the same position including two coats of synthetic enamel paint first quality olive green by spray painting over a coat of red oxide primer after preparation of new steel surface complete all as specified/directed and shown on drawing. Drg No. FD-67/1031 Note: Quoted rate is inclusive of Gas welding including grinding the surface to smooth finish.

Removing old u/s legs and S&F new legs made out of MS sheet 1.25 mm thick of size 485x70x100 mm for almirah medium made to shape as shown on drg and fixed in the same position including two coats of synthetic enamel paint first quality olive green by spray painting over a coat of red oxide primer after preparation of new steel surface complete all as specified/directed and shown on drawing. FD-68/1032 Note: Quoted rate is inclusive of Gas welding including grinding the surface to smooth finish.

Removing old unserviceable table top of office clerk steel and supply and fixing new 18/19 mm thick pre laminated particle board interior grade table top with top face of table decorative teak wood shade lamination and other side with balancing white lamination including 6mm x 18mm teak wood edging alround table top fixed as per drg and as directed. FD-1004

Removing of old unserviceable table top of office officers steel and supply and fixing new 18/19mm thick pre laminated particle interior grade table top with top face of table with decorative teak wood shade lamination and other side with balancing white lamination including 6mm x 18mm teak wood edging alround table top fixed as per drg and as directed. FD-1002/1003

Removing of old u/s table top and supply and fixing new table top 900x900 mm using 18 mm thick prelaminated particle board interior grade with decorative teak wood shade lamination and other side balancing white including 4mm x 18mm teak wood edging alround the table complete all as specified/directed and shown on drg. Table 900x900x760 mm Drg No FD-1009

Removing of old u/s table top and supply and fixing new table top 900x600 mm using 18 mm thick prelaminated particle board interior grade with decorative teak wood shade lamination and other side balancing white including 4mm x 18mm teak wood edging alround the table complete all as specified/directed and shown on drg. Table 900x600x760 mm Drg No FD-1007/1008

Removing of old unserviceable drawers from table office officers steel and supply and fixing new drawer steel complete made out of 1mm thick MS sheet bent to shape & made to size including painting the new steel surface with two coats of first quality synthetic enamel paint olive green by spray painting over a coat of Red Oxide Primer after necessary preparatio of surface complete all as directed. Drg No. FD- 1009

Removing of old unserviceable drawers from table 900 X 600 X 760 mm steel and supply and fixing new drawer steel complete made out of 1mm thick MS sheet bent to shape & made to size including painting the new steel surface with two coats of first quality synthetic enamel paint olive green by spray painting over a coat of Red Oxide Primer after necessary preparation of surface complete all as directed. Drg No FD - 1008

Removing of old unserviceable drawers from table office clerk steel and supply and fixing new drawer steel complete made out of 1mm thick MS sheet bent to shape & made to size including painting the new steel surface with two coats of first quality synthetic enamel paint olive green by spray painting over a coat of Red Oxide Primer after necessary preparation of surface complete all as directed. Drg No. FD - 1004

M&L for legs made out of MS 25 mm Square tube 1.6 mm thick 760 mm long fixed by means of continuous welding to stiffeners of Table clerks steel to match with the existing components including painting the entire new exposed steel surface with two coat of first quality synthetic enamel paint over a coat of red oxide primer complete with & including rubber bushes superior quality all as per drawing and as directed. Drg No. FD - 1004/1007/1008

M&L for long top rail for table 900x900x760 mm made out of MS 25 mm square tube, 1.6 mm thick 900 mm long fixed by means of continuous welding to legs / short stiffener to match with the existing components including painting the entire new exposed steel surface with one coat of first quality of synthetic enamel paint over a coat of red oxide primer complete all as per drawing and as directed. Drg No. FD- 1009

M&L for short top rail for table 900x600x760 mm made out of MS 25 mm square tube, 1.6 mm thick 600 mm long fixed by means of continuous welding to legs / short stiffener to match with the existing components including painting the entire new exposed steel surface with one coat of first quality of synthetic enamel paint over a coat of red oxide primer complete all as per drawing and as directed. Drg No. FD- 1007/1008

M&L for 6 lever locks of drawers Table Office Officer/Clerk steel including removing uncerviceable locks complete. Drg No. FD- 1003/1004

Removing the existing un serviceable table top from Table Dining ORs and supply & fixing table top made out of 18mm thick block board of size 1830 mm x 680 mm including covering the top surface of dining top with 22 gauge Aluminium sheet cut to size and fixed with MS Screws of size as ordered complete all as shown on drg. Drg No. FD - 165

Removing the existing un serviceable legs from Table Dining ORs and supply & fixing legs made out of MS 25 mm Square tube 1.6 mm thick 760 mm long fixed by means of continuous welding to stiffeners to match with the existing components including painting the entire new exposed steel surface with two coat of first quality synthetic enamel paint over a coat of red oxide primer complete including provision of rubber bushes superior quality all as per drawing and as directed. Drg No. FD - 165

Removing the existing un serviceable long stiffeners from Table Dining ORs and supply & fixing Long stiffener made out of MS 25 mm square tube, 1.6 mm thick 1600 mm long fixed by means of continuous welding to legs / short stiffener to match with the existing components including painting the entire new exposed steel surface with one coat of first quality of synthetic enamel paint by spray painting over a coat of red oxide primer complete all as per drawing and as directed. Drg No. FD- 165

Fixing Short stiffeners cut & made to size & shape using long stiffeners retrieved from Item No 85 here in above including welding to legs / long stiffener to match with the existing component including painting the exposed old steel surface with one coat of first quality synthetic enamel paint complete all as directed. Drg No. FD- 165

Removing the existing unserviceable Handle from locker steel and supplying & fixing handle D type 100 mm complete all as per drawing and as directed. Drg No. FD- 1029

Removing the existing unserviceable hasp & staple from locker steel and supplying & fixing Hasp & staple aluminum 75 mm x 2 mm thick x 25 mm complete all as per drawing and as directed. Drg No. FD- 1029

Repair to door of locker including replacement of hinges / door bracket with gas welding all as per drg and as directed by Engineer in Charge. Drg No. FD- 1029

Dismantling carefully and taking out the old unsv/ damaged shelf of locker steel and supply and fixing of new shelf made out of MS sheet 1 mm thick bent to shape and welding the same properly in position incl applying two coats of first quality synthetic enamel paint olive green by spray painting over a coat of Red oxide Primer after necessary preparation of surface complete all as directed by Engr-in-charge. Drg No. FD- 1029

S&F in repairs CP Hanging rods 19 mm dia with Bracket as per drawing Drg No. FD-1029

Removing of unsv worn out legs of locker steel size 600 mm X 70 mm X 100 mm by denting and providing with new legs fabricated out of 1.25 mm thick MS Sheet made to shape and size and fixed in posn by means of welding incl painting the new steel surface with two coats of first quality sysnthetic enamel paint olive green by spray painting over a coat of Red oxide primer after necessary prparation of surface all as directed . Drg No. FD-1029

Dismantling carefully and taking out unserviceable/ damaged door single leaf of Locker steel and supply and fixing new door single leaf made out of MS Sheet 1mm thick made to size and shape as per drawing including painting the new steel surface with two coat of first quality synthetic enamel paint olive green by spray painting over a coat of Red Oxide Primer after necessary preparation of surface complete all as directed. Drg No. FD-1029 Note for item wherein welding/ gas welding is involved: Quoted rate is inclusive of Gas welding including grinding the surface to smooth finish.

Chair easy (FD-229,17,20) :Removing of old unserviceable Canning and supply and fixing new canning all as per FD-3 and as directed by Engineer in Charge.

Chair Dining FD-228/279 :Removing of old unserviceable Canning and supply and fixing new canning all as per FD-3 and as directed by Engineer in Charge.

Chair Writing FD-250/280:Removing of old unserviceable Canning and supply and fixing new canning all as per FD-3 and as directed by Engineer in Charge.

Chair Writing FD-252:Removing of old unserviceable Canning and supply and fixing new canning all as per FD-3 and as directed by Engineer in Charge.

Charpoy GI Pipe (FD-220A) (1980x900x440 mm) Removing of old u/s long rail from charpoy GI Pipe without disturbing the adjoining parts and s&f new 32 m dia GI pipe med grade ISI marked for long rail 1884 mm long both ends threaded complete all as specified/directed and as shown on drg. (For one rail) Make : TATA/JINDAL/ZENITH

Fixing only short rail 804 mm long made out from long rail obtained from item No. --- above to Charpoy GI Pipe (FD-220A) (1980x900x440 mm), threading both ends including removing of existing u/s short rail complete all as specified/directed and as shown on drg.

Fixing only leg 392 mm long made out from short rail obtained from item No-- above to Charpoy GI Pipe (FD-220A) (1980x900x440 mm) with suitable threading and providing MS sheet of 3 mm thick 50 mm dia cut to size made to shape and welded to bottom of GI leg and also providing two Nos Mild steel clamp made out of 25 mm x 3 mm flat iron by means of welding in each led including removing of existing u/s short rail complete all as specified/directed and as shown on drg.

S & F GI elbow 32 mm dia 3 way medium grade (ISI marked) for charpoy GI pipe including removing of exisiting u/s 3 way elbow complete all as specified/directed and as shown on drg. Make : TATA/JINDAL/ZENITH

S & F GI check Nut 32 mm dia medium grade 6 mm thick (ISI marked) suitable for charpoy GI pipe complete all as specified/directed and as shown on drg.

Removing the existing unserviceable Nylon Newar from GI Charpoy and tighting of the frame of GI Charpoy and S&F 12 mm thick plywood commercial 7 ply BWR exterior grade ISI marked (confirming to IS 303) of size 1980 mm x 900 mm and rounding edges on four corners, fixing with GI bolts & nuts 6 mm dia 75 mm long with washers 3 mm thick duly drilled 10 holes per GI Charpoy (03 each on both long rails and 2 Nos each on both short rails) and fixing complete incl 02 Nos Flat Iron 40 x 6 mm to be welded between long rails 660 mm from each short rail. The welded portion shall be grinded smoothly and apply two coat of enamel black paint over a coat of red oxide primer for entire Flat Iron complete all as specified/directed and as shown on drg.

sandhya enterprises

sree ramawood furniture works

M/s National Traders