(ST Reserved work)-Repairs to common weir of Dopponi cheruvu, Shanigaram(V) & Orakunta, Rudragudem(V), Nallabelli(M), Warangal(D)

Clearing thin jungle growth ( less than 50 percent open space ) including bushes upto 30 cm / parthenium and other weeds including burning or disposing off the same as directed etc., complete.

Earth work in excavation in all kinds of soils of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Providing and laying incitu vibrated M-10 (28 days cube compresssive strength not less than 10 N/sq mm) grade cement concrete using 40mm down size approved,clean,hard,graded aggregates for foundation filling including cost of all materials,labour,machinery,formwork,cleaning,batching,mixing,placing in position,levelling,vibrating,finishing,curing etc..complete with initial lead upto 50m and all lifts.(Foundation)

Providing and laying incitu vibrated M-15 (28 days cube compresssive strength not less than 15 N/sq mm) grade cement concrete using 40mm down size approved,clean,hard,graded aggregates including cost of all materials,labour,machinery,formwork,cleaning,batching,mixing,placing in position,levelling,vibrating,finishing,curing etc..for Plain cement concrete complete with initial lead upto 1 km and all lifts.(SuperStructure)

Supply of 450 mm dia NP-3 Class RCC plain ended pipes including cost, conveyance of pipes etc., complete and as directed by the department.

Laying and jointing 450 mm dia. NP- 2 class or IRC standard hume pipes in CM 1 : 2proportion by volume including cost of all materials ( excluding pipes and collars ), machinery,labour, aligning, packing joints with hemp, finishing, curing etc., complete with initial lead upto 50 m and all lifts.

Providing homogeneous embankment using soil from approved borrow area in layers of 25 to 30 cm before compaction including cost of all materials, machinery, labour, all operations such as excavation,sorting out, transportation, spreading soil in layer of specified thickness, breaking clods, sectioning,watering, compacting to density control of not less than 95 percent or as stipulated using Sheep foot roller / Vibratory roller/ 8 to 10 tonne power roller etc., complete with initial lead upto 1 km and all lifts. (Proctor's Density control of 90% using 2T Roller)

OT Sluice EM parts: Fabrication, supply, erection, testing and commissioning of Embedded parts consisting of sil beam, slide tracks, seal seats, Guide plates etc. with all accessories including cost of all materials, machinery, labour, etc. complete as per specifications and approved drawings.

OT Sluice Gate: Fabrication, supply, erection, testing and commissioning of skin plate, horizontal and vertical angles, stiffeners, rubber seals, clamps with all accessories for sluice shutters including cost of all materials, machinery, labour, seal fixing etc., complete as per specification and approved drawings (excluding wastage of steel @ 2.5%)

OT Sluice Hoist & Hoist Bridge: Hoist including plaform for below 5 tons capacity (small Gates) Fabrication, supply, erection, testing and commissioning of Embedded parts consisting of supporting structure, platform etc. with all accessories for sluice shutters including cost of all materials, machinery, labour, cutting, bending, aligning, anchoring, welding, finishing etc. complete as per Specification and approved drawings (excluding wastage of steel @ 2.5%)

Painting EM Parts & Gates: Surface cleaning of metal surfaces by chemical cleaners and then by hand and power tool cleaners and removing dust. After cleaning, applying primary coat with one coat of protective mastic to a thickness of 70+5 microns, followed by finishing two coats with solventless coal tar epoxy each coat with a DFT of 150+5 and the total DFT of all coats including primary coat should not be leass than 350 microns with material, labour, and all accessories with all leads and lifts.

Painting Hoist & Hoist Bridge: Painting of sluices for Maintenance works: Surface cleaning of metal surfaces by chemical cleaners and then by hand and power tool cleaners and removing dust. After cleaning, applying primary coat with two coats of zinc chromite red oxide primer followed by finishing three coats with synthetic enamel paint with material, labour, and all accessories with all leads and lifts.