REPAIR AND MAINT OF CEILING FANS, EXHAUST FANS, WALL MOUNTED FANS , GEYSERS, SOLAR WATER HEATERS AND CONNECTED WKS INCLUDING MISC REPAIR AND MAINT OF ELECTRICAL FITTINGS UNDER GE SAUGOR

Amount

Taking down carefully existing ceiling fan of any size/sweep/make on any height from it's position, dismantling the fan including preventive maintenance by servicing, greasing, oiling, cleaning external surfaces porperly and replacement of defective spare parts and refixing the same in position including testing complete as directed by the Engr-in-Charge. (Note : Cost of spare parts and flexible connection wire as required shall be measured and paid separately under respective items of this Schedule as "Supply only").

Taking down carefully existing exhaust fan of any size/sweep/make on any height from it's position, dismantling the fan including preventive maintenance by servicing, greasing, oiling, cleaning external surfaces porperly and replacement of defective spare parts and refixing the same in position including testing complete as directed by the Engr-in-Charge. (Note : Cost of spare parts and flexible connection wire as required shall be measured and paid separately under respective items of this Schedule as "Supply only").

M&L single coat painting of ceiling fan of any sweep with 1st grade quality synthetic enamel paint by spraying, filling cavites with filler including necessary preparation of surface duly demarking fan Nos complete as specified and directed

Supply only Bearing any type and size suitable for the existing ceiling fan complete all as specified and directed. Make - SKF/NBC

Supply only Capacitor 2.5 Mfd paper insulated complete all as specified and directed. Make -CG/EPCOS/Havells

Supply only Capacitor 4 Mfd paper insulated complete all as specified and directed. Make CG/EPCOS/Havells

Supply only GM bush suitable for all as per sample any type of ceiling fan complete all as specified and directed

Supply only GM bush suitable for all as per sample any type of Table/cabin fan complete all as specified and directed

Supply only MS clamp (suitable for ceiling fan) for existing ceiling fan any type/size complete all as specified and directed.

Supply only PVC canopy for existing ceiling fan suitable for fan upper with screw complete all as specified and directed

Supply only PVC canopy for existing ceiling fan suitable for fan lower with screw complete all as specified and directed

Supply only Ball bearing suitable for exhaust fan of 250 mm sweep complete all as specified and directed. (Make : TATA/SKF/NBC).

Supply only Ball bearing suitable for exhaust fan of 300 mm sweep.complete all as specified and directed (Make : TATA/SKF/NBC).

Supply only Ball bearing suitable for exhaust fan of 450 mm sweep.complete all as specified and directed (Make : TATA/SKF/NBC).

M&L in repair to fan shaft by filling metal cutting by machine,grinding polishing complete and making good adequately for any ceiling fan complete all as specified and directed

M&L for writing Nos or figures (Block, Roman, Italic or Indian) such as "MES No …." with synthetic enamel paint (1st grade quality) of tint black/white complete all as specified and directed

S&F rubber insulator reel type suitable for fan hook of any type including taking out old one complete all as specified and directed

S&F in replacement PVC flexible 3 core round copper conductor of size 2.5 SQmm from including connection complete all as specified and directed.

S&F in replacement PVC flexible 3 core cable with copper conductor of size 0.75 Sqmm from ceiling rose to fan including connection complete all as specified and directed

S&F hanging clamp with nut/bolt and rubber bush suitable for ceiling fan of any make and size complete all as specified and directed

S&F down rod of ceiling fan made of GI pipe light grade 15mm dia duly drill and threaded with all fittings and fixed complete to walls/ceiling complete all as specified and directed.

S&F fan blade set (set of three) made out of aluminium suitable for 1200mm/1400 mm sweep ceiling fan, as per existing size and gauge including balancing of body strecture for free rotation all directed by Engr-in-Charge. Make : Usha/Crompton/Orison/Khaitan or as per existing make

Dismantling ceiling fan (any size/sweep/make) and taking out existing burnt out winding wire of motor and rewinding the same after proper cleaning with super enamelled copper wires as per existing gauge and turn to achieve the desired RPM, cleaning and replacement of bearings, bushes, capacitor etc as required and testing complete on completion for old model ceiling fan having requirement of super enamelled copper winding wire exceeding 500 Gms and not exceeding 1000 Gms for each fan and testing all complete as directed by the Engineer-in-Charge (Note : (a) Replacement of unserviceable parts like capacitor, bearing, bush and flexible wire shall be measured and paid separately. (b) Ceiling fan shall be collected from MES Store of GE Saugor and deposited to Store after repair.)

Dismantling of exhaust fan and taking out existing burnt out winding wire of motor and rewinding the same with super enamelled bare insulated copper winding wires as per existing gauge and turn to achieve desired RPM including cleaning and replacement of defective parts as required for exhaust fan of size 250 mm to 300 mm sweep and testing all complete as directed by the Engineer-in-Charge. (Note :- Replacement of unserviceable parts shall be measured and paid separately. (b) Exhaust fan shall be collected from MES Store of GE Saugor and deposited to Store after repair.)

Dismantling of exhaust fan and taking out existing burnt out winding wire of motor and rewinding the same with super enamelled bare insulated copper winding wires as per existing gauge and turn to achieve desired RPM including cleaning and replacement of defective parts as required for exhaust fan of size 450 mm sweep and testing all complete as directed by the Engineer-in-Charge. (Note :- Replacement of unserviceable parts shall be measured and paid separately.. (b) Exhaust fan shall be collected from MES Store of GE Saugor and deposited to Store after repair.)

M&L for single coat painting of exhaust fan of any sweep with 1st grade quality synthetic enamel paint by spraying, filling cavities with filler including necessary preparation of surface duly demarking the fan Nos complete as specified and directed. (Note : Writing Fan Nos & letter shall be measured and paid separately under relevent item of this Schedule).

Dismantling of air circulator fan/ wall mounting fan /table fan and taking out existing burnt out winding wire of motor and rewinding the same with super enamelled bare insulated copper winding wires as per existing gauge and turn to achieve desired RPM including cleaning and replacement of defective parts as required for air circulator fan/ wall mounting fan /table fan of any size and testing all complete as directed by the Engineer-in-Charge. (Note :- Replacement of unserviceable parts shall be measured and paid separately.. (b) Air circulator fan/ wall mounting fan /table fan shall be collected from MES Store of GE Saugor and deposited to Store after repair.)

S&F fan blade assembly with necessary MS screws & washers suitable for exhaust fans/Air circullar fan/Wall mount Fan /padestel fan of any descriptions .(Note: Set of three blades shall be measured as one unit and make of assembly shall be as approved by GE.)

Taking down carefully storage type water heater (Geyser) any make and capacity from clamps/ bolts including disconnecting water and electric connection and refixing the same and connecting up after cleaning of geyser and repair in E/M yard or site bringing out inner tank , geyser apparatus (Flange), thermostat, indicator lamp and reassembling complete after carrying out repair and replacement of wornout parts complete. Note : (a)worn out spares/repair of leakage of inner tank shall be measured and paid separately.(b)Petty stores like insulation tape, screws, small piece of cable, etc shall be provided by the Contractor without any extra cost to the department. (c) Defect developed while taking out the geysers, such as leaking of joints, damaging of thread of pipe/geyser and other GI fittings such as elbow, nipple, union, socket, etc shall be rectified/replaced by the contractor at his own cost.

S&F in replacement in replacement of geyser inner tank made out of stainless steel sheet, minimum weight 1.20 kg suitable for 25 liter capacity geyser, including ‘O’ ring, coupling set, necessary drilling work, nuts, bolts, washers, etc complete suitable for existing geysers complete all as specified and directed

S&F in replacement in replacement of geyser inner tank made out of stainless steel sheet, minimum weight 1.70 kg suitable for 50 liter capacity geyser, including ‘O’ ring, coupling set, necessary drilling work, nuts, bolts, washers, etc complete suitable for existing geysers complete all as specified and directed

S&F in replacement Geyser flange assembly (existing/type) copper alloy cromium plated suitable for 25/50 Ltr capacity including rubber gasket, clamp & nuts/bolts etc complete all as specified and directed

S&F in replacement Heating element 1.5 KW 230 Volts suitable for 25/50 Ltr capacity of Geysers as pre site requirement brass metal, CP complete all as specified and directed. Make : Theeta or equivalent make as approved by GE

S&F in replacement Heating element 2 KW 230 Volts suitable for 25/50 Ltr capacity of Geysers as per site requirement , brass metal, CP complete all as specified and directed. Make : Theeta or equivalent make as approved by GE

S&F in replacement Heating element 3/4 KW 230 Volts suitable for solar water heater as per site requirement complete all as specified and directed. Make : Theeta or equivalent make as approved by GE

S&F in replacement Heating element 2 KW 230 Volts suitable for 25 Ltr capacity of Geysers as per site requirement complete all as specified and directed. Make : Bajaj CALENTA 25

S&F in replacement Heating element 2 KW 230 Volts suitable for 25 Ltr capacity of Geysers as per site requirement complete all as specified and directed . Make : RACOLD or equivalent make as approved by GE

S&F in replacement Thermostat suitable for 25/50 Ltrs capacity of Geyser as per site requirement complete all as specified and directed . Make : RACOLD or equivalent make as approved by GE

S&F in replacement Thermostat suitable for 25 Ltrs capacity of Geyser as per site requirement complete all as specified and directed . Make : Bajaj CALENTA 25 or equivalent make as approved by GE

S&F in replacement Thermostat suitable for 25/50 Ltrs capacity of Geyser as per site requirement complete all as specified and directed. Make: Theeta or equivalent make as approved by GE

S&F in replacement Indicating lamp 230 V , as per site requirement complete all as specified and directed

S&F in replacement fusible plug for geyser as per site requirement complete all as specified and directed

S&F in replacement Glass wool in 25/50 liter capacity geyser by taking out inner & outer tank and reassembling complete all as specified and directed..

S&F in replacement Bib cock long body with flanged brass metal cromium plated size 15mm suitable for hot water complete all as specified and directed.

M&L for painting of Geyser with two coats of synthetic enameled white paint and writing the MES No for 25 ltr capacity geyser of any make and type complete after removing old paint and preparation of surface complete all as specified and directed..

All as per Srl item No.45 here-in-before but 50 Ltr capacity -ditto-

S&F in replacement multi functional safety valve 15mm , used in geysers as per site requirement complete all as specified and directed. Make : Racold/Bajaj/Havells.

S&F 15mm bore stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or unions and fixed complete all as specified and directed.

S&F GI tubing medium grade 15mm bore with all fitting and fixed complete to walls /ceiling,and taking down of GI Tubing with all fittings complete all as specified and directed.

S&F in replacement of GI union socket 15mm bore, ISI marked complete all as specified and directed.

S&F in replacement of GI Tee 15mm bore, ISI marked complete all as specified and directed.

S&F in replacement of GI Elbow 15mm bore, ISI marked complete all as specified and directed.

S&F in replacement of GI Socket 15mm bore, ISI marked complete all as specified and directed.

S&F in replacement of GI Hex nipple 15mm bore, ISI marked complete all as specified and directed.

S&F in replacement PVC connection cold water grade 18” long 15mm dia with two Nos coupling nut of brass, heavy duty complete all as specified and directed. Make - Jaguar/Prayag .

S&F in replacement PVC connection cold water grade 24” long 15mm dia with two Nos coupling nut of brass, heavy duty complete all as specified and directed. Make - Jaguar/Prayag

S&F in replacement PVC connection wire woven hot water grade 18” long 15mm dia with two Nos coupling nut of brass, heavy duty complete all as specified and directed. Make - Jaguar/Prayag

S&F in replacement PVC connection wire woven hot water grade 24” long 15mm dia with two Nos coupling nut of brass, heavy duty complete all as specified and directed.

M&L grouting of fastener of suitable size 15mm dia, 150 mm long by drilling wall and making good to the disturbed surface and matching with existing surface complete all as specified and directed.

M&L for Geyser base plate as per sample complete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

S&F exhaust fan, Metal body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers complete all as specified and directed.

S&F exhaust fan, Metal body AC single Phase. 230V of size 450mm sweep heavy duty with, blades, and frame and louvers complete all as specified and directed.

S&F wall mounted fans 230 volts single phase oscillating 400 mm sweep suitable for wall mounting complete all as specified and directed.

S&F in repairs including testing of AC three phase static energy meter of accuracy class 1.0, 3X240V, 50Hz, with backlit LCD display of rating 10-60A. (measures & display KWH, KVAH, V, I, KW, PF, Hz, last month history of KWh & MD in KW) with special features like TOD, tamper logging, optical communication port & display in absence of power with transferent hinge type box complete all as specified and directed.

S&F in repairs , testing of single phase static energy meter of accuracy class 1.0 , 240 volts, 50 Hz with Backlit LCD display rating 05 - 30 A & with push button (measure & display KWH,kVAh, V, I, PF,kW,kVA,Last month history of kWh&MD in kW) with special features like TOD, tamper logging, optical communication port & disolay in absence of power with transparent hinge type box ,DLMS complince complete all as specified and directed.

Repair /services/ checking of solar water heater of any capacity including descaling and arresting any type of leakage complete all as specified and directed

M&L for screwing existing steel tubing for altration or additions or lengthening screw on pipe to form connectors of any size GI tubing complete all as specified and directed.

M&L for PVC pipe medium grade 25mm/40mm complete all as specified and directed.

S&F in replacement in replacement of solar water heater water tank ( 200Ltr) as per sample fixed on solar collector complete all as site requirement and directed

S&F in replacement of Special grade Borocilicate glass tube as per sample suitable for existing 100 LPD and 200 LPD solar water heater complete all as specified and directed.

S&F in replacement in replacement of solar collector plate with tough end glass suitable size as per sample fixed on solar collector complete all as site requirement and directed

S&F in replacement of FL Tube light to LED TL fitting 20 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed.. Make:- Havells Cat Part No LHEXBLP7PN1W020, 4 feet or equivalent make as specified in Appx 'A' of Particular Specifications

S&F in replacement of FL light to LED optic fitting 1x9 Watt 2 feet box type complete all as specified and directed . Make Havells Cat Part No LHEXBLP7IN1W009 or equivalent make as specified in Appx 'A' of Particular Specifications

S&F in replacement of Conventional recess mounted fitting to LED 2' X 2' ultra slip recess mounted luminaire with high brightness 36 Watt LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for armstrong/grid ceiling complete all as specified and directed. Make:-Havells Cat Part No. PLANO2X2PLR36WLED857S or equivalent make as specified in Appx 'A' of Particular Specifications

S&F in replacement of FL light to LED Bulk head designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. Make:- Havells Cat Part No. LHEXCGP7UN5W013 or equivalent make as specified in Appx 'A' of Particular Specifications

S&F ceiling rose, surface backlite,three terminal complete all as specified and directed.

S&F including testing and connecting with existing light point with suitable size of flexible wire COMET SQUARE Slim surface mounted round al. die cast body with premium diffuser to ensure glare free even distribution of light.18 W LED 6000K complete all as specified and directed. Make- Havells Cat Part No. LHEAAWP7IL1W018 or equivalent make as specified in Appx 'A' of Particular Specifications

S&F in replacement PVC insulated and unsheathed twin core flexible copper wire 1.5 Sqmm (Nominal Area) White colour wire drawn in flexible pipe complete all as specified and directed

dipangashu barick and associates

M/S Sai supplier

m/s mohansingh

Raj Contruction

SHRI HARI CONSTRUCTION

M/S JAINENDRA KUMAR JAIN

shubhanshu traders