Sohratgarh Reorganization Water Supply Scheme in Nagar Panchayat Sohratgarh District Siddharthnagar

Repairing of Pump House

Repairing of Pump House (Dismentaling of old plaster &making new plaster, painting of Existing staff quarter) including supply of all material, labour, T&P etc complete.AS PER DIRECTION OF Engineer In Charge

Construction of pillar girder type structure for rebore tubewell including all material, labour,T&P etc.required for proper completion of work in the direction of Engineer in charge.

Construction of Pump House

Provide all material, labour, T&P Complete and Pump House cum chlorination room size 3.60 m x 3.00 m x 3.00 m and 2.8 m x 1.5 m x 3.00 m as per Structural Design Drawing as per relevant seismic Zone including cost of soil testing , Structural designing as per direction of Engineer-in-charge.

Bye Pass Chamber

Rising main

Supply of following sizes (D.I.) pipes for rising main/distribution system conforming to latest/relevant I.S. 8329/2000 Specifications with all jointing materials such as specials conforming to latest/relevant I.S. specifications suitable for D.I pipes as per IS-1239 /2000 and IS 8329/2000 or their latest amendment including F.O.R. destination and all taxes and insurance etc. with loading unloading but excluding the cost of trenches. All complete as per instructions of Engineer -in - charge.

125 mm dia DI Pipe K-9 (Rising Main)

150 mm dia DI Pipe K-9 (Rising Main)

Excavation of earth in ordinary soil (loam clay or sand) for pipe line and rising main trenches including lift upto 1.50 m and lead upto 50 m and refilling watering ramming of the excavated earth into the trench and also disposal of surplus earth upto 50m from the center of the trenches including supply of all material labour T&P etc complete as per instructions of Engineer -in -charge. (OD+600)mm

In ordinary soil

Design and construct Thrust Block made in R.C.C. with cement, coarse sand & 20 mm gauge stone ballast in proportion of 1:1.5:3, for pipe line, including supply of MS reinforcement wrought to required shape as necessary ,its bending, fixing & binding the same with 0.50 mm thick binding wire in position & necessary centering & shuttering including curing and supply of all materials, labour, T & P etc. required for proper completion of the work and as per specifications for RCC work as per instructions of Engineer -in -charge.

Distribution system

Excavation of earth in ordinary soil (loam clay or sand) for pipe line and rising main trenches including lift upto 1.50 m and lead upto 50 m and refilling watering ramming of the excavated earth into the trench and also disposal of surplus earth upto 50m from the center of the trenches including supply of all material labour T&P etc complete as per instructions of Engineer -in -charge. (OD+600)mm

In ordinary soil

Supply of following sizes HDPE Pipe PN-6: Class PE-100 for distribution system conforming to latest/ relevant I.S. 4984/1995 Specifications with all jointing materials and specials conforming to latest / relevant I.S. specifications including F.O.R. destination and all taxes and insurance etc. with loading unloading but excluding the cost of trenches all complete as per instructions of Engineer -in - charge.

90 mm dia HDPE Pipe PN-6, PE:100

110 mm dia HDPE Pipe PN-6, PE:100

140 mm dia HDPE Pipe PN-6, PE:100

160 mm dia HDPE Pipe PN-6, PE:100

200 mm dia HDPE Pipe PN-6, PE:100

250 mm dia DI Pipe K-7

350 mm dia DI Pipe K-7

400 mm dia DI Pipe K-7

Supplying & Laying the following dia DI butterfly /sluice valves, class I, working pressure 10 Kg/cm2 confirming to IS: 780/1969 or its latest amendments, including valve fittings & Dismantling Joints as per requirement F.O.R. destination, and lowering them into the already prepared trenches, complete and also including supply of jointing materials etc. complete .including all taxes and insurance, as per instructions of Engineer -in -charge.

Sluice valve

100 mm dia

150 mm dia

200 mm dia

250 mm dia

300 mm dia

Scoure valve

80 mm dia

Supply & Laying of single / double ball type air valve conforming to latest/relevent I.S. specifications including all taxes and insurance, complete (including supply of jointing materials and Valve fittings etc complete) as per instructions of Engineer.

Supply & Laying of under ground sluice value type fire hydrant consisting of 80 mm dia sluice valve, 80mm dia tail pieces, 80mm dia duck foot bend and 80 mm dia standard makes iron coupling with cap and etc. complete conforming to latest/relevent I.S. specifications including all taxes and insurance up to site of work (including supply of jointing materials and Valve fittings etc. complete as per instructions of Engineer ‐in ‐ charge.

Dismantling of following type of road surface including sorting out and stacking of serviceable materials and disposal of unserviceable materials upto distance of 50m. and also including temporary reinstatement of road by old materials.

Brick Road (BOE)

Bituminous Road

CC Road

Inter locking tile Road

Permanent reinstatement of following type of road surface including sorting out and stacking of serviceable materials and disposal of unserviceable materials upto distance of 50m.

Brick Road (BOE)

Bituminous Road

CC Road

Inter locking tile Road

Supply of all materials, labour, T&P etc. and construction of sluice valve/scour valve chamber as per type design.

Surface box type including supply and fixing of 150mm x 150 mm size surface box. (upto 125 mm dia valve)

Masonry type with RCC cover (more than 150 mm dia valve)

Supply of all materials, labour T&P etc. and construction of air valve chamber complete required for proper completion of the work as per type design (with RCC cover)

Supply of all materials, labour, T&P etc. and construction of fire hydrant chamber complete required for proper completion of the work as per type design (with RCC cover)

Provision for crossing of Nalas , Road for laying of pipe line including necessary specials , T&P and arrangement of diversion of water , baricating etc required with dismentling of drain and reconstruction of same as per type design of the existing drain .

Crossing of Road above 3.5 MTR

Crossing of Road 2.0- 3.5 MTR

Crossing of Culvert 2.0- 3.5 MTR

Crossing of Nalas 1.5- 2.0 MTR

Making house connection (with dismaintling and reinstatement of all types of roads on different dia of pipe ) with 20mm(OD) HDPE /AC/DI pipe main with Supply,Carting ,laying , jointing and fixing of the 15 mm (OD) G.I. pipe ,I.S.I. Mark Gunmetal Ferrul , I.S.I. Mark saddle/clamp of required size, C.I. bib kock of approved quality, J-Hook or M.S.U-clamp, 25cmX25cmX25cm C.C grouting of unsupported G.I. pipe all connection in inside the house and support on wall with suitable clamp as per directed by engineer-in charge including cost of all jointing material, specials, labour, testing and T&P etc. complete

Repairing of Drain/public ramp / other miscellaneous structure which are coming in alignment of pipe line and damaged during laying of pipe line including supply of all materials , labour T&P etc

Brick masonary in cement mortar 1:4

12 mm thick plaster in cement mortar 1:4

Providing , laying & construction of RCC work of 1:1.5:3 in thrust block / casing of pipe line as required during the construction period for laying of pipe lines as directed by Engineer-in-charge including normal form work , compacting , finishing the formed suffaces with CM 1:3 of sufficient minimum thickness to give a smooth and even sugace wherever necessary for proper completion of work.

RCC THRUST BLOCK FOR 80MM TO 100 MM DIA SIZE ( 0.6x0.6x0.6m)

RCC THRUST BLOCK FOR 125MM TO 200 MM DIA SIZE ( 0.9x0.9x0.9m)

RCC THRUST BLOCK FOR 250MM TO 500 MM DIA SIZE ( 1.25x1.25x1.0 m)

OVER HEAD TANK

Reparing and painting of Existing over head tank and releated compnent (Brace, column,bottom dome, top dome copleteby guniting mathod)and supply of staire case gate ,aluminium stair in water containar ,railing stand post GI pipe ,repleacing of old sluice valve ,repair of cracks on concrete surfacewith all safty equipment etc including all material labour t&p etc completion of work as per direction of engineer incharge.

Repairing of 150KL/ 12 M staging Over head Tank (zone-1)

Repairing of 350KL/ 18 M staging Over head Tank (zone-2)

Supply of all materials labour T&P etc. for complete construction of R.C.C. Over Head Tank following type Capacity and staging above ground level with main components, including cost of soil testing and assuming bearing capacity of soil as 8 MT, with supply of design and drawings.All the water retaining components of OHT shall be casted in M-30 concrete and minimum grade of concrete of foundation and staging should be M-25 with approved cement, coarse sand and stone grit as per I.S. 11682 and I.S.456. Seismic effects and wind load should be taken into consideration as per I.S. 1893 for earthquake resistance and I.S. 875 part-III for wind load on structure and including 1M wide RCC staircase, 1 m wide R.C.C. M30 balcony, M.S. ladder made of 50x50x6 mm angle section and 20mm plain M.S. bars with hand rails of 20mm medium class G.I. pipes, One aluminum ladder inside the tank from top dome to bottom dome, railing with 20mm dia medium class G.I.pipe (in 3 rows) on both sides of stair case,bolcony and top dome, supported on 50x50x6mm M.S. angle section, spaced at intervals not more than 1.5m, Proper ventilator at top dome in circular shape of 1.2 m dia, Water level indicator fabricated with sensor connecting to automation, Lightening conductor as per I.S.S.2309 or its latest amendments of latest electricity rules, consisting of proper elevation rod with 5 or more fork points as prescribed in ISS 2309-1969 and ISS 3013-1966, C.I. manhole of min 60x60cm size with locking arrangement, Supply, fixing, jointing of C.I.D/F Pipes of appropriate size with C.I.D/F specials conforming to IS 8329/2000 as vertical pipes for inlet, outlet, overflow and washout as per latest / relevant I.S. specifications with all jointing materials for proper completion of work, Supply and Fixing of appropriate size manually operated D/F Sluice Valve / Butter Fly Valves as per ISS 700/1969 or its latest amendments class “A” working pressure 10 Kg/cm2, Construction of bed blocks in 1:2:4 PCC with cement, coarse sand and approved stone grit , Construction of washout / overflow chamber and chambers for sluice / butter fly valves as per departmental type design and drawing, Supply of 200 mm dia PVC pipe as per I.S.-4985/2000 for disposal of water from overflow and washout chamber to suitable point outside the water works compound.Supplyand fixing of 1.8 m hight M.S. Gate in staire case at 2nd fligth as per direction of engineer -in-charge. Painting of all concrete surface and steel pipe works with water based exterior paint of approved make and quality as mentioned in tender document over one priming coat on new work with two coats, to give an even shade and anticorrosive paints including prepration of surface &supply of all matrials labour T&P etc. required for proper completion of the work. AS PER DIRECTION OF EIC

(ii) ZONE-2 - 1200KL Capacity 24 M staging

(i) ZONE-03 - 450KL Capacity 24 M staging

BOUNDARY WALL

Repairing of Boundry wall (Dissmentaling of old plaster &making new plaster, painting of Existing staff quarter) including supply of all material, labour, T&P etc complete.AS PER DIRECTION OF Engineer In Charge

Provide all material, labour, T&P Complete and soil Testing, Structural Design, Drawing as per relevant seismic Zone Construction of Boundry wall as per endicated elevation and plan.

Supply and fixing of 3.6 m wide main gate& 1.0 m wide wicket gate including construction of pillars as per departmental type design including if all material, labour,T&P etc.required for proper completion of work

P.c.c Interlocking solling with colured pcc moulded bricks over 8mm thick 1:6:12 p.c.c. filling the joints with local sand including all material, labour,T&P etc.required for proper completion of work .

Construction of 300 x 300 mm size Drain including all material, labour,T&P etc.required for proper completion of work in the direction of Engineer in charge.

provision of solar Lighting in campus as per direction of engineer in charge including all materials , labour, T&P etc.required for proper completion of works

provison of aboriculture in all zone campus (Pump house and water works) as per direction of Engineer in charge.

Provide all materials , labour, T&P etc.required for proper completion of works including leveling dressing exvavation and filling of earth where necessary for development of water works site including carriage of earth from distance of about 8 km.

STAFF QUARTER

Repairing of Staff Quarter (Dismentaling of old plaster &making new plaster, painting of Existing staff quarter) including supply of all material, labour, T&P etc complete.AS PER DIRECTION OF Engineer In Charge

Provide all material, labour, T&P Complete and soil Testing, Structural Design Drawing as per relevant seismic Zone Construction of a single room set staff Quarter as per endicated elevation and plan.

Construction of Artificial Recharging of Ground water through roof top rain water of pump house , by pas chamber and over flow of OHT including all material, labour,T&P etc.required for proper completion of work in the direction of Engineer in charge.

Provide all material, labour, T&P Complete andSoil Testing. Structural Design, Drawing as per relenant Seismic Zone Construction of MCS room as per indicated elevation & plan.

E/M WORKS

ZONE-I (Existing Tubewell)

Pumping plant and Other instrumentation work

PUMP SET:

SITC of 600 LPM, 52 m head 15 H.P. submersible pump set with 24 meter 80mm dia column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates.

SITC of Automatic chlorination system SCADA Compatable chlorinating system.

800mm Dia 3M long heavy duty column pipe same as above (Extra/Spare)

Supply & Erection of Servo Stabilizer of 25 KVA

CE / UL certified Intelligent smart energy meter

Motor Operated Actuator with Sluice Valve (upto 150mm)

CE / UL certified Electromagnetic flowmeter of size:upto upto 150mm

Soft Starter with Rs485 port-400 Class.

Auto phase reversal unit with inbuilt time delay & enclousre (confirm to IEC: 60947-1 & IEC: 60947-b-1)

CE / UL certified Hydrostatatic type sub soil water level transmitter

CE / UL certified Pressure Transmitter

SCADA AUTOMATION OF (NEW TUBEWELL Tubewell)

SCADA AUTOMATION ITEMS

CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement.

G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.

CE/UL Certified Surge protector for control panel

CE/UL certified 7" HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters.

Complete cabling for all equipments at pump house

Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment).

Installation, commissioing & testing for one tubewell

Trial Run for 3 month period for one tubewell

Instrumentation of OHT DMA-1

CE/UL Certified Radar type level Transmitter for OHT

Flow control Valve 200 mm size

Motor operated Actuator with Sluice valve 200mm Size

Electromagnetic Flowmeter of 200mm Size

CE / UL certified Pressure Transmitter

Residual chlorine analyzer with following description:- i- Chlorine Measuring sensor (Chlorine analyzer) for free chlorine membrane covered sensor 0.01…2mg/l; low pH dependency. ii- Single parameter system ready to operate to measure free or total chlorine iii- Connection cable 2 m, 2-wire, 2 x stripped ends, tinned iv- Battery and other accessories for power back for continous operation.

ZONE-II (01 No Rebore Tubewell)

Transportation

Rig Machine

Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c.

Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .

O.P.Unit

Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .

Drilling of Bore

Logging of bore hole by departmental/approved electric logger.

Drilling of 600mm dia bore from G.L. to 60m BGL.

Drilling of 450mm dia bore from 61m BGL to 100m BGL.

Drilling of 450mm dia bore from 100m BGL to180m BGL.

TUBEWELL ASSEMBLY

300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 150mm dia M.S reducer 16mm thick, 1 no M.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect .

150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mm thick , 1 no M.S. bail plug , 08 no center guide etc comp in all respect.

LOWERING OF T/W ASSEMBLY

Lowering of 300mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space of bore hole and T.W. assembly from G.L. to 165m BGL.

Lowering of 300mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL.

Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL.

Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 165m BGL.

PEA-GRAVEL

Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed, Screened and properly Stacked at Site.

DEVELOPMENT OF TUBE WELL

Development of tube well by 250 PSI air compressor

Development of tube well by 250 PSI air compressor

Development of tube well by 3 cusec O.P. Unit

Development of tube well by 3 cusec O.P. Unit.

Chemical and bacteriological test.

Pumping plant and Other instrumentation work

SITC of 800 LPM, 60 m head 20 H.P. submersible pump set with 24 meter 100mm column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates.

SITC of Automatic chlorination system SCADA Compatable chlorinating system.

100mm Dia 3M long heavy duty column pipe same as above (Extra/Spare)

Supply & Erection of Servo Stabilizer of 30 KVA

CE/UL Certified Intelligent Smart Energy Meter

Motor operated Actuator for with Sluice Valve of size upto 150 m

Electro magnetic flow meter upto150mm.

Soft Stater with RS485Port- 400 V Class,

Auto phase reversal unit with inbuilt time delay & enclousre (confirm to IEC: 60947-1 & IEC: 60947-b-1)

CE/UL Certified Hydrostatic type sub soil Water Level Transmiter for Tubewell

CE/UL Certified Pressure Transmiter .

SCADA AUTOMATION OF (NEW TUBEWELL Tubewell)

SCADA AUTOMATION ITEMS

CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement.

G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.

CE/UL Certified Surge protector for control panel

CE/UL certified 7" HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters.

Complete cabling for all equipments at pump house

Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment).

Installation, commissioing & testing for one tubewell

Trial Run for 3 month period for one tubewell

Master control station (MCS)

SCADA DISPLAY

CE/UL & BIS Certified industrial grade LED MONITOR with latest configuration as per specification.

(i) 65'' LED MONITOR With latest configuration

CE/UL/&BIS certified industrial grade large video screen(LVS)with latest configuration of LED type LFD ad per specificatio, MATRIX of 55'' each panel.

(I)2x2 Matrix (4 panel)

Video wall media player of same OEM.

Desktop/PC with i5/i7 prosessor for as per spec mentioned in technical bid document.

CE/UL Cerfified 5 KVA UPS with batteries as per spec mentioned in technical bid document.

Full development version of reqrired TAGS SCADA Software with counstomization of software for MCS as per requirement as per spec mentioned in technical bid documents.

CE/UL certified master control room PLC with redundant CPU & power supply at MCS in IP54 enclouser as spec mentioned in technical bid documents.

EC/UL certified Field gateway agent for transfering data from MCS to Central control room.

GSM based wireless/Broadband/Equipment communication system for PLC capable to tranfer & received data & gather data from remote sited to control station, All accessoried included signal enhancer antenna along with running expences till DLP.

CE/UL Certified Firewall for network protection.

SURGE PROTECTOR FOR ETHERNET communication protection.

CE/UL certified industrial grade Ethernedt Switch

Mobile App Facility system architecture (industries internet baded & viewed through mobile apps for increased local & Remote Visibility).

Canon/HP or eqrivalent Laser Printe 1018 or equivement.

Security Surveillance IP camera with recorded (optional).

Installation, Commissioning & testing inclidung required funiture, A/c etc.

Trial run for 3 month period.

Automation of OHT DMA-1

CE/UL Certified Radar type level Transmitter for OHT

Flow control Valve 250 mm size

Motor operated Actuator with Sluice valve 250mm Size

Electromagnetic Flowmeter of 250mm Size

CE / UL certified Pressure Transmitter

Residual chlorine analyzer with following description:- i- Chlorine Measuring sensor (Chlorine analyzer) for free chlorine membrane covered sensor 0.01…2mg/l; low pH dependency. ii- Single parameter system ready to operate to measure free or total chlorine iii- Connection cable 2 m, 2-wire, 2 x stripped ends, tinned iv- Battery and other accessories for power back for continous operation.

Automation of OHT DMA-2

Flow control Valve 200 mm size

Motor operated Actuator with Sluice valve 200mm Size

Electromagnetic Flowmeter of 200mm Size

CE / UL certified Pressure Transmitter

Residual chlorine analyzer with following description:- i- Chlorine Measuring sensor (Chlorine analyzer) for free chlorine membrane covered sensor 0.01…2mg/l; low pH dependency. ii- Single parameter system ready to operate to measure free or total chlorine iii- Connection cable 2 m, 2-wire, 2 x stripped ends, tinned iv- Battery and other accessories for power back for continous operation.

Cable Laying for Rebore Tubewell

Supply of Aluminium conductor PVC insulated Armoured served sheathed cables 1100 volts grade. 2R x 3.5 Core x 25 sq. mm. (U.P. PWD S.O.R Year 2018 for electrical works Chapter 5-Item No 501(J)).

Cable laying from old pump house to Rebore tubewell of 25 sq. mm aluminium armoured cable. (U.P. PWD S.O.R Year 2018 for electrical works Chapter 5-Item No 501(J)).

Complete cabling for Tubewell including all power and control cables of all equipment at pump house.( Jal Nigam E/M SOR Year- 2020 Scada automation items Sr.No. 14(i))

Installation, commissioning and testing of SCADA Automation System at Rebore Tubewell.( Jal Nigam E/M SOR Year- 2020 Scada automation items Sr.No. 16).

Three Month Trial & Run for 03 Month

ZONE-III (01 New + 01 Existing Tubewell)

Transportation

Rig Machine

Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c.

Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .

O.P.Unit

Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .

Drilling of Bore

Logging of bore hole by departmental/approved electric logger.

Drilling of 500mm dia bore from G.L. to 60m BGL.

Drilling of 450mm dia bore from 61m BGL to 100m BGL.

Drilling of 450mm dia bore from 100m BGL to180m BGL.

TUBEWELL ASSEMBLY

200mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 no M.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect .

150mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mm thick , 1 no M.S. bail plug , 08 no center guide etc comp in all respect.

LOWERING OF T/W ASSEMBLY

Lowering of 200mm X 150mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space of bore hole and T.W. assembly from G.L. to 165m BGL.

Lowering of 200mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL.

Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL.

Lowering of 150mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 165m BGL.

PEA-GRAVEL

Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed, Screened and properly Stacked at Site.

DEVELOPMENT OF TUBE WELL

Development of tube well by 250 PSI air compressor

Development of tube well by 250 PSI air compressor

Development of tube well by 3 cusec O.P. Unit

Development of tube well by 3 cusec O.P. Unit.

Chemical and bacteriological test.

Pumping plant and Other instrumentation work

SITC of 600 LPM, 64 m head 15 H.P. submersible pump set with 24 meter 80mm dia column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates.

SITC of Automatic chlorination system SCADA Compatable chlorinating system.

80mm dia 3M long heavy duty column pipe same as above (Extra/Spare)

Supply & Erection of Servo Stabilizer of 25 KVA

CE / UL certified Intelligent smart energy meter

Motor Operated Actuator with Sluice Valve (upto 150mm)

CE / UL certified Electromagnetic flowmeter of size:150mm

Soft Starter with Rs485 port-400 Class.

Auto phase reversal unit with inbuilt time delay & enclousre (confirm to IEC: 60947-1 & IEC: 60947-b-1)

CE / UL certified Hydrostatatic type sub soil water level transmitter

CE / UL certified Pressure Transmitter

SCADA AUTOMATION OF (NEW TUBEWELL Tubewell)

SCADA AUTOMATION ITEMS

CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement.

G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.

CE/UL certified 7" HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters.

CE/UL Certified Surge protector for control panel

Complete cabling for all equipments at pump house

Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment).

Installation, commissioing & testing for one tubewell

Trial Run for 3 month period for one tubewell

Instrumentation of OHT DMA-1

CE/UL Certified Radar type level Transmitter for OHT

Flow control Valve 250 mm size

Motor operated Actuator with Sluice valve 250mm Size

Electromagnetic Flowmeter of 250mm Size

CE / UL certified Pressure Transmitter

Residual chlorine analyzer with following description:- i- Chlorine Measuring sensor (Chlorine analyzer) for free chlorine membrane covered sensor 0.01…2mg/l; low pH dependency. ii- Single parameter system ready to operate to measure free or total chlorine iii- Connection cable 2 m, 2-wire, 2 x stripped ends, tinned iv- Battery and other accessories for power back for continous operation.

Instrumentation of OHT DMA-2 & DMA-3

Flow control Valve 200 mm size

Motor operated Actuator with Sluice valve 200mm Size

Electromagnetic Flowmeter of 200mm Size

CE / UL certified Pressure Transmitter

Residual chlorine analyzer with following description:- i- Chlorine Measuring sensor (Chlorine analyzer) for free chlorine membrane covered sensor 0.01…2mg/l; low pH dependency. ii- Single parameter system ready to operate to measure free or total chlorine iii- Connection cable 2 m, 2-wire, 2 x stripped ends, tinned iv- Battery and other accessories for power back for continous operation.

3 Months Trial and Run

ZONE-IV ( 03 Nos New Tubewell)

Transportation

Rig Machine

Transportation of Rig m/c and its T&P including Erection and Dismantling of Rig m/c.

Transportation of 250 psi compressor including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .

O.P.Unit

Transportation of 2/3 cusec op unit including Loading , unloading, Erection, Dismantling & labour etc complete in all respect .

Drilling of Bore

Logging of bore hole by departmental/approved electric logger.

Drilling of 600mm dia bore from G.L. to 60m BGL.

Drilling of 500mm dia bore from 61m BGL to 100m BGL.

Drilling of 500mm dia bore from 100m BGL to 180m BGL.

TUBEWELL ASSEMBLY

300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 300 X 200mm dia M.S reducer 16mm thick, 1 no M.S. well cap 12mm thick , 10 no M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc comp in all respect .

200mm dia MSERW 7.1mm thick plain /slotted pipe including with 20 no M.S ring 100X12mm thick , 1 no M.S. bail plug , 08 no center guide etc comp in all respect.

LOWERING OF T/W ASSEMBLY

Lowering of 300mm X 200mm dia tube well assembly in bore hole and shrouding of pea gravel between annular space of bore hole and T.W. assembly from G.L. to 165m BGL.

Lowering of 300mm dia MSERW 7.1mm thick plain pipe from GL to 54m BGL.

Lowering of 200mm dia MSERW plain/slotted pipe 7.1mm thick from 55m BGL to 100m BGL.

Lowering of 200mm dia MSERW plain/slotted pipe 7.1mm thick from 100m BGL to 165m BGL.

PEA-GRAVEL

Supply of 1.6 - 4.8 mm size Lal Kuwan Quarry Pea-Gravel Duly Washed, Screened and properly Stacked at Site.

DEVELOPMENT OF TUBE WELL

Development of tube well by 250 PSI air compressor

Development of tube well by 250 PSI air compressor

Development of tube well by 3 cusec O.P. Unit

Development of tube well by 3 cusec O.P. Unit.

Chemical and bacteriological test.

Pumping plant and Other instrumentation work

SITC of 1100 LPM, 65 m head 30 H.P. submersible pump set with 24 meter 150mm column pipe assembly, NRV, CI D/F Bend 90°, CI A/F Tee, D/F pipe (1.5m long 2 Nos and 1.0m long 1 No), Earthing, Painting Toolset, Power wiring of pump house internal and external, Chainpully block, and all Pumping plant accessories with nut bolts and rubber packing etc. Rates of items required for SCADA Automation of pumping plant are not included in these rates.

SITC of Automatic chlorination system SCADA Compatable chlorinating system.

3M long heavy duty column pipe same as above (Extra/Spare)

Supply & Erection of Servo Stabilizer of 40 KVA

CE / UL certified Intelligent smart energy meter

Motor Operated Actuator with Sluice Valve (upto 150mm)

CE / UL certified Electromagnetic flowmeter of size:upto 150mm

Soft Starter with Rs485 port-400 Class.

Auto phase reversal unit with inbuilt time delay & enclousre (confirm to IEC: 60947-1 & IEC: 60947-b-1)

CE / UL certified Hydrostatatic type sub soil water level transmitter

CE / UL certified Pressure Transmitter

SCADA AUTOMATION OF NEW TUBEWELL

SCADA AUTOMATION ITEMS

CE & UL Certified PLC/RTU in IP 54 enclosure suitable to Communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & fetures as specified for each tubewell/OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified also enabled with UPS for power backup upto 2Hrs & automatic on/off switching arrangement.

G.S.M/G.P.R.S based wireless communication 4G Modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification.

CE/UL certified 7" HMI touch screen suitable to communicate with PLC/RTU for local display and control of process parameters.

CE/UL Certified Surge protector for control panel

Complete cabling for all equipments at pump house

Control panel with IP 54 protection, industrial grade for all equipment (Separate for control (24V) and power equipment).

Installation, commissioing & testing for one tubewell

Trial Run for 3 month period for one tubewell

Instrumentation of OHT DMA-1, DMA-2 & DMA-3

CE/UL Certified Radar type level Transmitter for OHT

Flow control Valve 250 mm size

Motor operated Actuator with Sluice valve 250mm Size

Electromagnetic Flowmeter of 250mm Size

CE / UL certified Pressure Transmitter

Residual chlorine analyzer with following description:- i- Chlorine Measuring sensor (Chlorine analyzer) for free chlorine membrane covered sensor 0.01…2mg/l; low pH dependency. ii- Single parameter system ready to operate to measure free or total chlorine iii- Connection cable 2 m, 2-wire, 2 x stripped ends, tinned iv- Battery and other accessories for power back for continous operation.

Three Month Trial & Run for 03 Month

Please Enable Macros to View BoQ information