REPLACEMENT OF FURNITURE AGAINST CONDEMNED ARTICLES UNDER GE (AF) LOHEGAON AT HQ 2 WG ,9 BRD UNDER AF STN PUNE

Amount

Annual Maint Grant 2025-26, CPP 25-26 approved by HQ CWE (AF) Lohegaon

Almirah Large Steel with shelves FD 1031 DIMENSION:- Overall size shall be 1985mm high,920mm wide and 485mm deep. DESCRIPTION:-The base shall be made of two numbers mild steel sheet channel bases made in U shaped with ends covered . Mild steel sheet shall be 1mm thick. The base channel shall be welded at 50mm from each end of the length of 920mm and shall be up to full width of 485mm and shall be 100mm high Top, sides bottom and back of almirah shall be of 1mm thick mild steel sheet . Four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartments.Front shutter shall two leaves of equal size .Front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung. All joints and welding and fixing shall be done in accordance with the standard workmanship. HANDLE: One chromium plated steel handle with a locking device shall be provided as shown on drawing . LOCKING DEVICE:The locking device shall be three way locking device and shall also be provided with decorative key plate .Make of Lock-Harrison/Godrej. FINISH:-All steel surfaces exposed to view when placed in position shall be painted with two coats of silver grey hammer paint internally and extrenally with spray machine after preparation of surfaces.A mark of MES shall also be provided on top left corner of front shutter with visible colour. Painting shall be done with spray machine.Rest all as per drg.

Almirah Large Steel 1/2 hanging 1/2 Shelves) FD/E6/MAP/18 Overall size of almirah large steel is 1900mm high, 910mm wide and 490mm deep. The MS sheet used for making sides, front, drawers, partitions, base and shelves of the almirah shall be of 20 gauge except the back which shall be of 22 gauge. Three shelves shall be fixed at an equidistant positions as shown in drg.The locker of the almirah shall be provided with safety handle and lock. The front two doors of the almirah shall be fixed with 75mm long hinges three on each side with proper rivet and welding. The weight of the locker shall not be less than 68 kgs The shelves shall be welded to sides and back of almirah internally as shown on drg.One chromium plated rod of 20mm dia shall be fixed at 75mm below the top for hanging purpose. The entire almirah shall be treated with granular silver grey shade irrespective of what is shown on drg.Rest all as per drg.

Almirah med Steel with shelves FD-1032 DIMENSION: Overall size shall be 1270mm high,765mm wide and 440mm deep. DESCRIPTION: The base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. Mild steel sheet shall be 1mm thick for channel base. The base channel shall be welded at 50mm from each end of 765mm length and shall be up to full width of 440mm of almirah. Top, sides, back, bottom and front of almirah shall be of 1mm thick mild steel sheet. Three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick mild steel sheet.Front shutters shall have two leaves.All joints and welding, fixing shall be done according standard workmanship HANDLE: A steel chromium plated handle 100mm long shall be provided to the shutter. LOCKING DEVICE: The locking device shall be three way locking device and shall also be provided with decorative key plate .Make of Lock-Harrison/Godrej. FINISH: All steel surfaces exposed to view when placed in position shall be painted with two coats of green hammerpaint over a coat of primer with spray machine after preparation of surfaces. A mark of MES shall also be provided on left top corner of front shutter of visisble colour as directed by Engr-In -Charge.Rest all as per drgs

Bed Hard: FD/E6/MAP/08 (R) Overall size shall be 2050mm long, 900mm wide and 400mm high. All Steel shall be MS Square pipe of 18 Gauge. The head board shall be 800mm high and Foot board shall be 500mm high. The frame of head board and foot board shall be of 38mmx38mm MS square pipe.18mmx18mm MS square pipe shall be provided in the inner of head board frame/foot board frame as shown in drg.18mm thick both side decorative prelaminated particle board of walnut shade with PVC edging shall be screwed to MS strip arc welded to 18mm thick rectangular pipe with standard workmanship both in head board/foot board..25mmx65mm rectangular CR pipe shall be used to make the long rails and short rails of bed hard and welding shall be done for fixing long rails to the legs irrespective of what is shown on drg.One stiffener of size 25mmx25mm shall be welded between the two legs of headboard over 150mm from the ground level. The top of bed hard shall be of 12mm thick BWR ply Grade AA conforming to IS 710 of approved make fixed over the four equidistant stiffener of size 25mmx25mm SQ MS pipe in line with bottom of 25x65mm long rail section. PVC shoes shall be provided to legs of bed.All metal /iron work shall be treated with synthetic enamel black after doing two coats of metal primer.Rest all as per drg.

Bin Linen Multipurpose FD/E6/MAP/09 The overall size of the bin linen multipurpose is 1200mm long x 450mm wide x 750mm high. The sides, partitions, shelves, drawers of the bin linen shall be made up of 18mm thick prelaminated particle board exterior grade. The back of the bin linen shall be of 12mm thick commercial plywood. The three equal shutters shall be provided with magnetic catchers. All fittings and fixtures shall be done as per drg.The base shall be provided at an height of 75mm from ground and shall be of hardwood sheesham with four nos of 25x25mm stiffeners placed at equidistant positions. Rest all as per drg.

Verticle Filing Cabinet 4 drawer:TP Vertical Filling Cabinets which use less floor space. Size of 4 Drawer VFC shall be 1320 mm (H) x 470 mm (W) x 620 mm (D). All the components shall be made of CRCA. It should have 1 point Locking Mechanism and a Rigid Knock Down construction. The Top, side & Drawer Front thickness should be 0.7 mm . The Frames, Drawer inside cover and Side Back Side thickness should be 0.6 mm. The back, Bottom and Drawer thickness should be 0.5mm. Easy to grip full length recess handle should be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on drawer Fronts. In addition 28 'EZEE'/ 'Visa files (Foolscape) from front to back of thickness 20 mm per drawer can be hanged in VFC. The Centralized locking System shall be provided along with Shocking Bolt Mechanism and 10 lever Lock. The VFC should have anti - tipping arrangement which ensures that when one drawer is opened for use, It does not allow other drawers to be opened. The High quality Precision Ball slide shall be provided with Drawer Load capacity of max 40 Kg and UDL for 75000 cycles (BS) . Plain Triangular plate top should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The Finishing shall include Epoxy powder coated to the thickness of 50 microns ( +/-10) Make/Model Durian TINKLER/4 or equivalent in Godrej/ Featherlite : .

Chair writing Offr MAP FD/E6/MAP/12 The frame of the chair shall be of MS tubular frame powder coated ,cantilever type of size 25mmx10mm in section. Back form shall be designed with contoured lumber support for extra comfort.120mm thick hot pressed plywood upholstered with superior quality fabric and moulded polyurethane foam with PVC lipping alround shall be provided at seat and back.PU arms shall be of superior quality and reinforced with MS insert.It shall be scratch and wheather resistant..Steel portion of chair shall be painted with two coats of synthetic enamel paint of black colour over a coat of primer.Rest all specifications are as per drg and directed by Engr-In-Charge

Chair dining Cushioned Offrs FD/MAP-II/04 Overall size shall be 950mm high,450mm wide and 450mm deep.The size of the legs shall be 40x50mm .Front and side rails shall be of size 25x65mm.Stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 40 density cushion of approved foam(Kurlon/sleepwell) covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.Side frame of back of the chair shall be of section 40x50mm..Four teak wood vertical stiffeners of section 20x30mm shall be fixed in back of chair. 25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.The curved teak wood back shall be of section 30x45mm.All sizes shall be taken as stated in specification, irrespective of what is shown on drg. All wood surfaces shall be lacquer polished with high gloss finish of walnut shade.Rest all as per drg.

Chair Dinning FD/MAP-II/05 Overall size shall be 890mm high, 440mm wide and 430mm deep. The size of the legs shall be 30x55mm .Front and side rails shall be of size 30x65mm.Stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg.One stiffener of size 40mmx40mm shall be fixed in between the two opp rails of the seat for providing extra support to PVC seat. PVC seat 4mm thick of PPCP material and weight not less than 0.50 kgs with perforated holes shall be fixed inside the frame of seat with proper screws. The height of the seat shall be at 460mm high from ground. The size of the teak wood back shall be 45x15mm made out of 45x35mm section.25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs. All wood surfaces shall be lacquer polished with high gloss finish of natural shade. Rest all as per drg

Chair computer FD/E6/MAP/01 The Base pedestal assembly of chair computer shall be of dia 700mm and 1060mm high .The pedestal assembly shall be provided with injection molded in black 30% glass filled nylon. A 10.5mm dia forged bright Zinc plated MS Castor Pin is of press fitted into each prong for holding the castors. The seat and back of the chair computer shall be made of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. The back form shall be designed with contour lumber support for extra comfort with PVC lipping allround.The back rest shall be adjustable and consist of drop lift mechanism and shall be adjusted in the insert .It shall be scratch and weather resistant. Rest all as per drg.and as per sample approved by BSO/GE

Chair PVC : TP Chair PVC with cushoined make Suprme/cello/Nilkamal

Hat stand with mirror FD-233 DIMENSION: Overall size shall be 1000mm long, 700mm wide and 35mm thick. DESCRIPTION: a) All wood to be used shall be 1st class hard teak wood. b) It shall be made of BWR plywood of grade - A of specified thickness. c) Looking mirror shall be 5.5mm thick. f) Pegs shall be of brass/copper oxidized/stainless steel of size 120mm long Rest all specifications and dimensions are as per drg FINISH: All plywood and wooden surface shall be melamine polished in walnut finish after preparation of surface.

Ladder aluminium FD-1025 DIMENSION:Overall size shall be of 2310mm long and 363.5mm wide. DESCRIPTION: The ladder shall be of Aluminium having wall thickness 3.18mm .Each rung shall be of 23mm dia aluminium pipe with wall thickness not less than 2.43mm and shall be eight in nos at equidistant space of 300mm in between as shown in drg.The stringer of ladder shall be 31.75mm wide and 3.18mm thick .Each alumnium pipe rung of 23 mm dia shall be fitted inside the stringer with end bend to shape and each rung on both sides shall be provided with hard rubber cap. Hard rubber caps/shoes shall be fixed at the ends of aluminium rungs and stringers as shown on drawing with screws. Rest all as shown on drawing.

Recepticle PVC FD/E6/MAP/13 The body of receptacle PVC shall be made up of thick polymer plastic .It shall be of capacity 20 liters, provided with lid and handle as shown in drg.

Stool dressing With cushioned seat FD/E6/MAP/14 Overall size shall be 450 mm long,300mm wide and 380mm high.All wood shall be Ist class teak wood. The size of the legs shall be of size 50mmx30mm .The size of the three bottom stiffener shall be of size 19mmx25mm.The size of the top rails shall be of size 25mmx65mm.12mm thick commercial plywood shall be fixed over the top rails for seat .The seat of the stool shall be made of 75mm thick foam cushion of 32 density duly covered with best quality tapestry cloth. Rest all as per drg.

Table 3'x2' With Drawer JCO FD-283 (overall size 900x600x760mm) DIMENSION: Overall size shall be 900mm long, 600mm wide and 760mm high. DESCRIPTION: a) All wood to be used shall be 1st class hard teak wood. b) Irrespective of what is shown on drg,the top of table shall be 18mm thick BWR plywood of Grade-A with 1 mm thick laminated sheet pasted over the ply with marine grade adhesive and all edges of top shall be covered with 6mm thick teak wood beading c) Irrespective of what is shown on drg, one center stiffener of size 20mmx50mm shall also be provided length wise at center in between the side bottom rails d) 25mm dia hard rubber /PVC rings shall be fixed to the bottom of all legs with 20mm long screws Rest all specifications and dimensions are as per drg FINISH: All plywood surface at interior and wooden portion shall be melamine polished in walnut finish after preparation of surfaces.

Table dining 4 Persons FD/MAP-II/03 (1200mmx900mmx750mm) DIMENSION:Overall size shall be 1200mm long, 900mm wide and 750mm high. DESCRIPTION: a) All wood to be used shall be 1st class hard teak wood b) Irrespective of what is shown on drg,the top of table shall be 18mm thick BWR plywood of Grade-A with 1 mm thick laminated sheet pasted over the ply with marine grade adhesive and all edges of top shall be covered with 6mm thick teak wood beading c) Irrespective of what is shown on drg ,the top shall be fixed over the frame with suitable screws from under neath. d) Eight wooden corner brackets made to shape of size 100mm x 100mm x 35mm thick shall also be fixed in between the legs and top rails with adhesive and wooden screws to make the table more strudy. e) 25mm dia hard plastic shoes shall also be provided to bottom of all legs with 20mm screws. Rest all specifications and dimensions are as per drg FINISH:All wooden surfaces shall be polished in high gloss Melamine finish of walnut shade after preparation of surfaces.

Table dining 6 Persons FD/MAP-II/03 (1500mmx900mmx750mm) DIMENSION:Overall size shall be 1500mm long, 900mm wide and 750mm high. DESCRIPTION: a) All wood to be used shall be 1st class hard teak wood b) Irrespective of what is shown on drg,the top of table shall be 18mm thick BWR plywood of Grade-A with 1 mm thick laminated sheet pasted over the ply with marine grade adhesive and all edges of top shall be covered with 6mm thick teak wood beading c) Irrespective of what is shown on drg ,the top shall be fixed over the frame with suitable screws from under neath. d) Eight wooden corner brackets made to shape of size 100mm x 100mm x 35mm thick shall also be fixed in between the legs and top rails with adhesive and wooden screws to make the table more strudy. e) 25mm dia hard plastic shoes shall also be provided to bottom of all legs with 20mm screws. Rest all specifications and dimensions are as per drg FINISH:All wooden surfaces shall be polished in high gloss Melamine finish of walnut shade after preparation of surfaces.

Table Center FD-274 DIMENSION:Overall size shall be 900mm long, 450mm wide and 400mm high. DESCRIPTION: All wood shall be of teak wood. Top of the table shall be of 18mm thick prelaminated MDF board of approved shade with 4mm thick teak wood beading all-round the edges of top.Legs shall be made out of 60mmx30mm in section teak wood and 356 mm high. Bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs, widthwise at 100mm above the bottom of legs.The bottom tier shall be fixed on the top of bottom side rails with 50mm long screwss.The bottom tier shall be of 18mm thick prelaminated particle board exterior grade of approved shade with 4mm thick teak wood beading all-round the edges of both the tops.25mm dia hard rubber /PVC rings shall be fixed to the bottom of all legs fixed with 30mm long screws. FINISH:All wood surfaces shall be French polished with high gloss finish Rest all as per drg.

Table bed side steel FD/E6/MAP/15(R) The overall size of the table bed side shall be 450mm x 450mm x 600mm from rear and 450mm x 450mm x 500mm from front as shown in drg.The entire frame of table bed side shall be made up of 18mm MS square pipe (18 Gauge) duly black powder coated. The two sides and top shall be made up of 18mm thick prelamainted particle board exterior grade. The Back of the table except the top portion as shown in drg shall be provided with 6mm commercial plywood BWR grade duly screwed to frame. The two sides, back and bottom of drawers of the table shall be made up of 12mm thick commercial plywood irrespective of what is shown on drg, except the front side which shall be of 18mm thick prelaminated particle board exterior grade. The drawers shall be made functional on teak wood runners fixed inside the tables shown on drg.The drawers of the tables shall be provided with 100mm long CP handles .Rest all as per drg.

Table dressing ladies with mirror Incl Stool FD/MAP-II/07 The overall size of the table dressing shall be 1150mm long 380mm wide and 1700mm high. The sides, top ,back and front of the base unit shall be of 18mm thick prelaminated MDF board. The bottom of the side units shall be of 12mm thick commercial plywood. The sides and back drawers shall be of 12mm thick prelaminated MDF ,bottom of the drawers shall be of 6mm thick commercial ply whereas the front of the drawers shall be of 18mm thick prelaminated MDF board.5mm thick electro copper plated mirror shall be fixed over 6mm thick plywood back. The plywood shall be fixed on two vertical hardwood member of size 45mmx35mm .a horizontal support of size 30mmx20mm shall be provided in between two vertical members. The Overall size of the stool shall be 440mm long 350mm wide and 425mm high. The four sides shall be of 18mm thick prelaminated MDF .The top of the stool shall be of 12mm thick plywood openable as shown in drg.Four heavy duty revolving nylon double wheels shall be provided at base below the 6mm base ply fixed over wooden runner 20mmx20mm.The seat of the stool shall be 75mm high ,made of foam 40 density covered with tapestry cloth as approved by Engr-In-charge/GE.Rest all as per drg.

Dressing mirror gents FD/E6/MAP/16 DIMENSION: Overall size shall be 1200mm high, 600mm wide and 100mm high. DESCRIPTION: a) All wood to be used shall be 1st class hard teak wood b) It shall be made up of BWR plywood of grade - A of specified thickness as per drg in lieu of prelaminated particle board. c) 1 mm thick laminated sheet shall be pasted on all exterior surface with marine grade adhesive including 6mm thick teak wood beading shall be provided alround the edges of shutters and drawers. d) Looking mirror shall be 5 mm thick fixed inside the teak wood frame made out of 38mmx25mm section. e) 03 x glass shelves of 5mm thickness shall be fixed inside the box with glass holders as shown in drg. Rest all specifications and dimensions are as per drg FINISH: All unlaminated plywood surface/wooden surface shall be polished in high gloss melamine polish in walnut shade after preparation of surfaces.

Table computer FD/E6/MAP/03 Overall size shall be 900mm long,561.20 mm wide and 750mm high.All prelaminated particle board used in manufacturing of top ,shelves,drawers,tray shall be of 18mm thick prelaminated extrior grade board.The frame of table shall be of 25MM thick.The top of table shall be provided with 4mm thick teak wood beading.The legs shall be made out of 25mmx50mm MS rectangular CR pipe of 18 guage.Each leg shall be provided with rectangular PVC cover made to shape on front sides only.The legs shall also be provided with nylon buffers .Rest all as per drg.

Table peg FD-384 DIMENSION; Overall size shall be 450mm long,300mm wide and 380mm high. DESCRIPTION: Legs shall be of teak wood of section 30mmx50mm.The legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position.Two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs.Two bottom rails of size 20mmx40mm shall be fixed between the legs .A centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg.Top of the table shall be of 18mm thick pre-laminated MDF board with 4mm teak wood edging all round the top of table. FINISH: All wood surfaces exposed to view when placed in position shall be french polished with high lacquer finish.Rest all as per drg.

Teapoy FD- 278 DIMENSION: The overall size shall be 600mm long, 450mm wide and 540mm high. DESCRIPTION:The legs shall be 60mmx30mm in section and 497 mm high and shall be of teak wood.5mmx5mm in section groove shall be provided at the visible portion of top of legs. Top rails of teak wood of 20mmx50mm in section and 510mm long shall be provided between the legs. Bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs, widthwise at 100mm above the bottom of legs. A centre rail of size 20mmx50mm shall also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg.25mm thick and 25mm dia hard rubber /PVC rings shall be fixed to the bottom of all legs fixed with 30mm long screws. Top of the table shall be of 18mm thick prelaminated MDF board exterior grade of approved shade with 4mm thick teak wood beading all-round the edges of top. FINISH: All wood surfaces shall be French polished with high gloss finish. Rest all as per drg

Teapoy verandah FD/E6/MAP/17 Overall size shall be 700mm long 400mm wide and 540mm high. The legs, top centre stiffener, top rails and bottom rails shall be of 18mm square MS pipe of wall thickness 1.6 mm.Base tray made of 5mm dia MS bar 12x10 nos at equidistant shall be made and fixed as shown on drg.The top shall be of 18mm thick pre laminated particle board of approved shade and the edges shall be covered with 4mm thick teak wood beading. Hard rubber shoe shall also be fixed to the bottom of each leg.The steel frame shall be painted with synthetic enamel black colour.Rest all as per drg.

Table office clerk steel FD-1004 Overall size shall be 1200mm long, 610mm wide and 760mm high. Steel frame shall be of size 1160x570x742mm .four legs of 25mm mild steel tube of 1.6mm wall thickness shall be provided. Top of legs shall be joined together with 25mm square mild steel tube of wall thickness 1.6mm in long and short sides. Two short stiffeners f same size shall be provided at 130mm from bottom of legs. One long stiffener shall also be provided to the middle of short stiffeners. Three drawers of equal size shall be provided on the right hand side above the stiffener at 130mm high with overall size of 350mm wide and 430mm high and 410mm deep..The top of table shall be provided with pre-laminated particle board of 18/19mm thick with teak veener shade and PVC edging alround the table .Hard rubber/PVC toes shall be provided to the legs. Locking device shall be provided to drawers. All steel surfaces exposed to view shall be given two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces. Rest all as per drgs.

Table office officer steel FD-1003 DIMENSION:Over all size shall be of 1680x870 x760mm. DESCRIPTION:25 mm MS square tube 1.6 mm thick shall be provide to frame 1 mm thick MS sheet nominal all around for drawer.Top shall be of 18mm thick pre-laminated MDF board ISI mark (exterior gde) one side decorative finish approved by GE and 4 mm thick teak wood edging all around shall be provided for top.Three drawers shall be provided on right hand sides of table.A cupboard with front openable door shall be provided on the left side of the table.A shelf shall aslo be provided at the middle of cupbaord.All sheet for drawers shelf and cupboard and back covering shall be 1mm thick.Hard rubber shoes shall also be provided to the bottom of legs.Rest all as per drgs FINISH:All steel surfaces exposed to view when placed in position shall be painted with two coats of silver grey hammer paint internally and extrenally with spray machine after preparation of surfaces.A mark of MES shall also be provided on top left corner of front shutter with visible colour. Painting shall be done with spray machine.Rest all as per drg.

Chair Executive Leatherette Black : TP Black Color - High Back - Leatherette Chair - Fixed Arms - Center Tilt Mechanism - Nylon Base MAKE/model Durain RICH/37826/HB or equivalent in Godrej/ Featherlite

Executive revolving chair Thrill Mesh Plus Full back and head rest : TP Mesh back with headrest, black body, 1D Asjustable Armrest, Centre Tilt Synchro Mechanism, 3 Pos Lock, Nylon Pedestal, Height-117.5 to 131.0 cm Width-75.00 cm Depth-75.00 cm Seat Ht-45.0 -54.5 cm MARVEL/HB/PREMIUM : Black Color - High Back - Mesh Chair - Adjustable Arms - Self Weighted Multi Locking Mechanism - Crome Base .MAKE/model Durain RICH/37826/HB or equivalent in Godrej Model No - Thrill Mesh 56101522SD04653 & 56101522SD04668 / Featherlite

Visitor Chair Cushioned with armrest : TP Knitted Fabric, 1D Adjustable Armrests, Centre Tilt Synchro Mechanism, 3 Pos Lock, Nylon Pedestal Colour of the Fabric-As per sample approved Width - 60.5 Cm Depth - 65.0 Cm Height - 86.5 Cm Seat Height - 46.0 Cm MAKE/model Durain or equivalent in Godrej Model No - MULTIPURPOSE FU1007XXV01SXXEN/Featherlite

F S ENTERPRISES (BID ID -3445070)

M/s National Traders (BID ID -3443778)

KASTURILAL HARICHAND OHRI AND SONS (BID ID -3438121)

Mahesh Traders (BID ID -3439292)

agarwal and company (BID ID -3439739)

swastik industries (BID ID -3438850)