GE/CHM-33/2021-2022 REPAIR AND MAINT OF BLDGS OF WCLU, 42 MVH, KOI SPORTS COMPLEX, STN HQ CHM, 867 AT COY, STN WKSP, FD WKSP, DDGSI, PNR COY UNDER AGE B/R I AT CHANDIMANDIR

Amount

Demolition of lime concrete unreinforced in sunken portion of tiolet not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed by Engineer-in-charge.

Material and labour rendering 15mm thick plaster in cement mortar 1:3 mixed with WPC on fair faces of brick wall or on concrete surfaces in sunken portion of toilet and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).

Supply only Integral waterproofing compound, all as specified.

Material and labour applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified & directed by Engineer-in-charge.

Material and labour hard core of broken bricks of gauge of guage n.exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

Demolition of brick work, stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and removal unserviceable materials, debris and rubbish complete all as specified & directed .

Material and labour brick work with sub class ‘B’ bricks of class designation 7.5 all as per IS-1077-1992 (minimum compressive strength of brick 75 kg / Sqcm) old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

Material and labour brick work with sub class ‘B’ bricks of class designation 7.5 (min. compressive strength 75Kg/Cm2) old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, including demolition of old brick work complete all as specified & directed.

Material and labour, 15mm thick rendering in cement mortar 1:6 on brick walls or concrete surface and finished even and smooth without using extra cement including taking down old cement plaster and providing necessary scaffolding , safety precautions and other requisite arrangements as per site requirement complete all as specified & directed.

Material and labour, 15mm thick rendering in Cement and Sand mortar 1:4 over concrete /brick surfaces finished fair and even without using extra cement upto 10 metre height , including taking down old cement plaster and providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed.

Material and labour, 5-10mm thick rendering in Cement and Sand mortar 1:3 over brick work or concrete surfaces finished fair and even without using extra cement, as in ceiling, chajjas, facias, at any position , including taking down old cement plaster & providing necessary scaffolding , safety precautions and other requisite arrangements all as per site requirement complete all as specified & directed.

Material and labour preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

Material and labour preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of Chalk whiting on plastered surfaces, preparatory to distempering complete, all as specified.

Material and labour three coats of white wash on wall surfaces including preparation of new surfaces complete all as specified and directed

Material and labour three coats of white wash on ceiling surfaces including preparation of new surfaces complete all as specified and directed

Demolition of reinforced cement concrete, reinforcement cut as required to facilitate, of any description as in parapet, roof wall, slab, chajjas, shelves and similar work in any position not otherwise specifically provided for, complete all as specified and directed.

Material and labour reinforced cement concrete 1:1.5:3, nominal mix, type A-1 using 20mm graded crushed stone aggregate as in Chajja and similar works, all as specified. Note : Reinforcement and form work shall be measured and paid separately

Material and labour form work to, chullah hoods, chajjas, troughs and similar items including edges and similar items including edges for fair finished surface of concrete flat complete all as specified and directed.

Material and labour, precast cement concrete (reinforced) 1:1.5:3 nominal mix, type A-1 using 20mm graded crushed stone aggregate in shelves, lintel band and similar works including setting in cement mortar 1:4 Complete all as specified and directed NOTE : Reinforcement will be measured and paid separately.

Demolition of plain cement concrete in ground floor and paving n.exc 15cm thickness below or above ground level complete all as specified and directed.

Material and labour non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 including dismantling of old tile and removal of debris complete all as specified and directed.

Material and labour non skid, first quality ceramic coloured tiles (joint free), 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:6 including dismantling of old tile and removal of debris complete all as specified and directed.

Material and labour glazed coloured ceramic tiles in vertical surface 350mm x 250mm x7mm / 450mm x 300mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick rendering in cement mortar 1:4 including dismantling of old tile and removal of debris complete all as specified and directed.

Material and labour coloured vitrified ceramic tiles 8-10mm thick (square / rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 including dismantling of old tile and removal of debris complete all as specified and directed

Material and labour coloured vitrified ceramic tiles (dark shade / double charged/ ultracharged) 8-10mm thick (square / rectangular) polished, area of each tiles exc 0.42 Sqm but n.exc 1 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick screed bed in cement mortar 1:6 including dismantling of old tile and removal of debris to a distance n.exc 1.5 Km complete all as specified and directed

Material and labour PCC 1:2:4, nominal mix, type B-1, using 20 mm graded mechanically crushed stone aggregate as in floor, 40mm thick, finished even and smooth without using extra cement complete all as specified. (Note:- Rates quoted includes the cost of labour for fixing glass dividing strips as required).

Supply only 38mm wide and 3mm thick glass dividing strip complete all as specified & directed by Engineer-in-charge.

Material and labour plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate cast in situ in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed by Engineer-in-charge.

Material and labour, plain cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protections, 50mm thick, finished fair and even without using extra cement, with 10mm wide joints to full depth @ 3m c/c and at corners, filled with mastic mortar, complete all as specified and directed.

Taking down chowkhats or frames (without taking of shutters from the frames) area exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified & directed by Engineer-in-charge.

Taking down chowkhats or frames (without taking of shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified & directed by Engineer-in-charge.

Taking down shutters of any description exceeding 1.00Sqm but not exceeding 2.00Sqm each complete all as specified & directed by Engineer-in-charge.

Refixing shutter in same opening of any description exc 1sqm and n exc 2 sqm each including taking down, easing and adjusting ,renewal of unserviceable screws and also refixing builders hardware as required etc complete all as specified & directed by Engineer-in-charge.

Supply and fix, mild steel framed work as in doors or gates etc of angles or other sections with gusset plates complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with including hooks and hinges (excluding of covering steel sheeting) fastening, locking arrangement, etc conforming to Fe-410-O or Fe-310-O and fixed at site completeall as specified and directed.

Supply and fix factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing on Page No. 160 of SSR-2010 (Part II) all as directed by Engineer-in-Charge.

Supply and fix factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

Supply and fix 35 mm thick second class hard wood factory made plain, framed, panelled shutters (Two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated all as specified & directed by Engineer-in-charge.

Supply and Fix flush shutters 30mm thick factory made solid core construction with block board core and ply wood face panels commercials type on both side complete all as specified & directed.

Supply and Fix flush shutters 25mm thick factory made solid core construction with block board core and ply wood face panels commercials type on both side complete all as specified & directed.

Material and labour 2nd class hardwood boarding 20mm thick, planed one side and butt joints, fixed with nails shelves; Partitions and shelves of built-in cupboards, , fixed as in repair to replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, etc complete all as specified & directed.

Supply and fix glazed and gauged skelton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, a shop coat of pink primer complete all as specified & directed.

Supply and fix glavanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tack or galvanised wire stapples complete all as specified & directed by Engineer-in-charge.

Supply and fix, as in repair, steel window, box type, primer coated, 1.00mm wall thickness, with glazing bar and openable shutter prepared to recieve sheet glass, complete including cutting holes, four Nos. for each window and making good dismantled portion in PCC (1:2:4) type B-1. including following fittings welded to frame/ shutter:- (a) Hold fast 150mm out of 25x6mm flat iron made to shape- 04 Nos. each window (02Nos. on each side). (b) Handle of 'Z' section 20mmx25mm, 100mm long- 01No. each leaf. (c) MS tower bolt 150mm long- 02 Nos. each leaf. (d) 'Z' section 20mmx25mm, 100mm long stopper 01 No. each leaf. (e) Cleat 55mm long of hollow square section 15mmx15mm of 24 guage wall thickness, welded to hinge of 55mm size 01 No. per leaf. (f) MS box type hinges of 75 mm size- 02Nos. per leaf. (g) Fabrication & fixing complete. Note: Glass panes & painting shall be measured & paid separately under respective item.s. Design shall be approved from Engr-in-Charge as existing at site and all as per Drawing before fabrication and bulk order to the manufacturer.

All as per serial item No 43 hereinbefore but without glazing bar.

All as per serial item No 43 hereinbefore but top hung shutter ventilator

Supply and fix 100mm size, butt hinges, medium weight, cold rolled mild steel fixed to PVC / wooden chowkhats fixed complete all as specified & directed.

Material and labour 150mm aluminum anodized barrel tower bolts (ISI Marked) of extruded section, complete all as specifie

Supply and fix 150 mm size aluminium handle (ISI Marked), cast type, anodised complete all as specified & directed by Engineer-in-charge.

Supply and fix 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, fixed as in repair complete all as specified and directed.

Supply and fix aluminum alloy, anodized, sliding door bolt (ISI Marked),250mm long hasp , staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed, complete all as specified and directed.

Supply and fix 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed by Engineer-in-charge.

Supply and fix 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia & PVC connection 15mm size, 450 mm long with PTMT nuts in repairs complete all as specified & directed by Engineer-in-charge.

Supply and fix PVC connections 450mm long, 15mm size with PTMT nuts for WHB, flushing cistern, geysers etc fixed as in repair complete all as specified & directed by Engineer-in-charge.

Material and labour preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified & directed by Engineer-in-charge.

Material and labour preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide, zinc chrome primer complete all as specified & directed by Engineer-in-charge.

Hacking out old broken glasses (any thickness, size, quality or description)from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, all as specified & directed by Engineer-in-charge.

Supply and fix, 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes, complete all as specified and directed.

Supply and fix 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed.

Supply and fix vitreous china squatting pan, “Orissa” pattern size 580mm x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe, set with cement concrete, fixed as in repair, complete all as specified & directed.

Supply and fix cast iron traps 'P' or 'S' suitable for 100mm bore cast iron pipe, fixed as in repair, complete all as specified & directed by Engineer-in-charge.

Material and labour, cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) or PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth, and removal of rubbish outside MoD land, complete all as specified and directed.

Taking up or down 15mm bore steel tubing with all standard fittings or connections, from wall/ceiling/floor etc., including removal from site to store/for re-use or for credit, complete all as specified and directed.

All as per item No. 62 hereinbefore but for 20mm bore

Supply and fix, Steel water tubes, 15mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.

All as per item No. 64 hereinbefore but except GI pipe 15mm bore

Supply and fix, Steel water tubes, 20mm dia bore, medium grade, galvanized, with all standard fittings and fixed complete to walls (surface/ concealed), ceiling or laid in floors, complete all as specified and directed. Note: Cutting chases and making good shall be measured and paid separately.

All as per item No. 66 hereinbefore but except GI pipe 20mm bore

Material and labour, high strength deformed bar TMT bars 8-10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortar including disposal of demolished material n.exc 1.5 km complete all as specified and directed.

Material and labour 15mm thick granite slab (of any type & shade as approved), width and length as ordered, best quality machine cut to be fixed on cooking platform, counter slab etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing and granite polishing,over screed bed 15mm thick in cement mortar 1:4 including cutting / rounding of edges where requried complete all as specified and directed.

All as per serial item No 70 hereinbefore but on vertical surfacs as on skirting complete over and including 15mm thick scree bed in cement mortar 1:4

Material and labour machine cut Kota Stone Slab flooring, 20 to 25mm thick, best quality (minimum size 58cm x 58cm) over and including cement screed bed 20mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab, cutting, rubbing, grinding and polishing (mirror finish) complete all as specified and directed.

Material and labour machine cut kota stone slab flooring 15-18mm thick of size not less than 55cmx55cm , laid and jointed with grey cement slurry mixed with pigment to match the shade of slab,as in in skirting, dados, risers to steps, pillar etc, laid over and including 10mm screed layer in cement mortar 1:4, cutting, rubbing, grinding and polishing complete, all as specified.

Material and labour CI floor trap 75mm dia with grating including jointing to waste pipe with run led jointed and seting in cement concrete type B-1 (1:2:4) , fixed as in repair complete all as specified and directed.

Supply and fix fancy type bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-105gms), fixed as in repairs complete all as specified and directed.

Supply and fix concrete interlocking paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning, including dismantling of old paver block and removal of debris of any description complete all as specified and directed

Supply and fix concrete interlocking paver block, with grey cement and no pigment, design as approved, any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, and including laid over 25mm thick sand cushioning, including dismantling of old paver block and removal of debris of any description complete all as specified and directed

Supply and fix concrete interlocking paver block, with grey cement and pigment, design as approved, any shape and size conforming to IS 15658-2006 of 80 mm thickness, M-40 Grade, and including laid over 25mm thick sand cushioning, including dismantling of old paver block and removal of debris of any description complete all as specified and directed

Supply and fix 100mm bore cast iron soil waste and vent pipes in any length with or without ears with cement joints fixed in walls, including taking down existing pipe and MS clamps complete all as specified and directed.

Supply and fix 75mm bore cast iron soil waste and vent pipes in any length with or without ears with cement joints fixed in walls, including taking down existing pipe and MS clamps complete all as specified and directed.

Supply and fix ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) for 20mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fix ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fix ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gm) for 25mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fix in repairs 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fix stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) for 15mm bore pipe fixed as in repairs complete all as specified and directed.

Supply and fix grating doom 140mm dia of PTMT (Minimum weight 50gms) fixed as in repair complete all as specified & directed by Engineer-in-charge.

Supply and fix in repair, stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions complete all as specified & directed by Engineer-in-charge.

Supply and fix wash hand basin, vitreous china, flat back , white of size 550X400mm, MS angle bracket of suitable length and size embeded in wall with PCC 1:2:4 fixed in repair complete all as specified and directed.

Supply and fix in repairs viterous china bowl urinal flat back, size of 465 x 355 x 265mm white (Minimum) with grating and union for discharge pipe including providing & fixing plugs, waste pipe , bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified & directed by Engineer-in-charge.

Dismantling any type (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified & directed by Engineer-in-charge.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.

Material and labour 6 mm thick asbestos cement sheet, corrugated, or semi corrugated sheets as in roofs, walls etc. and fixed with 'L' type or 'J' type hook or cranked bolts complete all as specified & directed by Engineer-in-charge.

All as per serial item No 94 here-in-before but except sheet

Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed.

Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed.

Material and labour PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in padding over roof, mixed with water proofing compound, finished fair and even without using extra cement complete all as specified and directed. (water proofing compound to be measured and paid separately)

Material and labour rendering 15mm thick plaster in cement mortar 1:4 mixed with WPC on concrete roof surfaces and finishing the surface even and fair without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only).

Material and labour 3mm thick Atactic polypropylene polymer (APP) based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions , complete all as specified & directed.

Material and labour 40mm thick brick tiles are bedded in cement mortar (1:6) or lime mortar (1:3), 15mm thick and joints grouted and pointed flush in separate operation in cement mortar 1:3 mixed with crude oil @ 5% by weight of cement ,complete all as specified and directed.

All as per serial item No 101 here-in-before but except tiles

Material and labour door closer hydraulically regulated cast iron body, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg , complete all as specified and directed.

Supply and fix for 15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed in repair, complete all as specified and directed.

Supply and fix 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm bore PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.

Supply and fix 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.

Supply and fix 2000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, screwable lid, hoisted and fixed in position, including tank nipple, float valve, ball valve 20mm PTMT, including dismantling of existing water tanks and removing from site all as specified in SSR Part-I and all as directed by Engineer-in-charge.

Supply and fix for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engineer-in-charge.

Supply and fix 110mm bore PVC (SWR) bend any radius with access door complete all as specified and directed

Supply and fix PVC (SWR) rain water pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed in repair complete all as specified and directed

Supply and fix 75mm bore PVC (SWR) bend any radius with access door complete all as specified and directed

Material and labour providing and fixing Gypsum Board 12mm thick in ceiling on and including standard GI snap grid powder coated, framed and suspended with 4mm dia wire including clips etc in patterns as approved by GE, in panels of size 605mm x 605mm (GI snap grid consisting of 1mm thick standard GI sections i.e. channel, angle, tee etc for intermediates, parameters etc) supported with 1mm thick standard GI section, fixed in ceiling with necessary fitting and fixtures as per manufacturers instructions, fixed as in repair complete all as specified and directed.

Taking down steel rolling shutters, push and pull type (area of opening n.exc 10 sqm each) complete all as specified and directed.

Supply and fix steel rolling shutters (1.25mm thickness of lath), without ball bearing, including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, push pull type with ball bearing including a shop coat of red oxide primer, complete all as specified and directed

Taking down and re-fixing in same position steel rolling shutters, gear operated type (area of opening exc 15 sqm but n.exc 36 sqm each) after necessary repair/ replacement of parts including welding / riveting broken parts, tightening all the components, setting right the shutter, greasing / oiling and making fully functional complete all as specified and directed. Note : Replaced components / parts shall be measured and paid separately as "Supply only"

Supply only lath of rolling shutter 1.25mm thickness complete all as specified and directed

Supply only MS Springs of size 300mm to 450mm suitable for rolling shutter of size upto 3.50m wide complete all as specified and directed

Supply only MS Springs of size 600mm suitable for rolling shutter of size upto 5.50m wide complete all as specified and directed

Supply and fix 25mm dia mild steel pipe suitable for shaft pipe of rolling shutters,all as specified and directed.

Supply and fix gear box with suitable crank handle suitable for operating of rolling shutter in up and down ward motion, fixed as in repair complete all as specified and directed.

Supply and fix drapery rod (conduit) of dia not less than 20mm having a corrugated virgin PVC extrusion on its surface and ABS plastic rings and finials of approved shed with standard MS powder coated brackets, fixed to walls with rawl plugs and steel screws fixed as in repair complete all as specified and directed.

Material and labour rendering 15mm thick plaster in cement mortar 1:4 mixed on brick wall or on concrete surfaces including dubbing coat if required on internal and external faces of parapet on roof top, RCC facia, RCC parapet wall, cornices, ceiling and finishing the surface even and smooth without using extra cement at height exceeding 6 metre but not exceeding 12 metre and applying 2 Coats cement base paint over a coat of white wash including taking down old plaster and removal of debris upto a distance of 1.50KM and providing necessary form work and scaffolding as per site requirement and carriage of all material all as specified and directed by Engineer-in-charge.

Supply and fix PVC cover suitable for water storage tank capacity exc 500 ltrs but n.exc 1000 ltrs, including necessary tightening with screw etc complete all as specified and directed.

Material and labour cleaning removing of all waste material, sludge, silt , mud and garbage and vegitation etc from shafts of toilet block sewerage shaft and removing of all waste materials exc 250 Mtrs but not exc 500 Mtrs and repair of plaster, flooring, pointing brick work ad plumbing work etc in shaft in foul condition as directed . NOTE : Plumbing, flooring, plastering etc will be measured and paid extra in respective items)

Material and labour welding work as in welding to butt hinges to old angle iron frame / pressed steel door frame / steel windows make smooth as required thickness of metal to be welded not exceeding 6mm complete all as specified and directed.

Supply and fix in repair, 32mm/40mm dia, 800 mm long PVC waste pipe for wash basin, sink , urinal etc complete all as specified & directed by Engineer-in-charge.

Refixing shutter in same opening of aluminium shuttter exc 1sqm and n exc 2 sqm each including taking down, easing and adjusting ,renewal of unserviceable screws and also refixing builders hardware as required etc complete all as specified & directed by Engineer-in-charge.

Supply and fix, powder coated aluminum frame/ chowkhat for doors, windows, partition, ventilator etc with one or more rebates (wall thickness of aluminium section not less than 2mm) including joinging cleats for fixing etc standard anodized aluminum section, powder coating not less than 50 micron, complete all as specified and directed Note : Shutters shall be measured and paid separately "as supply and fix" under respective items.

All as per serial item No 128 here-in-before but aluminium anodized

Supply and fix, powder coated (thickness or powder coating of any colour coating not less than 50 micron) aluminium door shutters made of aluminium sections including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, aluminum snap beading, screws etc. complete all as specified and directed by Engineer-in-Charge. Note : (i) Only weight of the aluminium sections shall be measured and paid. (ii) Glass panes and panels shall be measured & paid separately under respective items as "Supply only" . Design shall be approved from Engr-in-Charge as existing at site before fabrication and bulk order to the manufacturer.

All as per serial item No 130 here-in-before but aluminium anodized

Supply and fix in repair for 100mm size 4 Levers, brass, mortice Lock, vertical type complete all as specified & directed by Engineer-in-charge.

Supply and fix in repairs for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of MS heavy duty complete all as specified & directed by Engineer-in-charge.

Supply and fix vitreous china, wash down water closet pan, Pedestal pattern, starwhite colour with ‘P’ or ‘S’ trap, including flushing cistern with lid, fitting and seat cover, complete set, fixed as in repair complete all as specified and directed. MAKE : HINDWARE Constellation Cat Part No 20024 (S-10/P-19) cist -21038 or equivalent in PARRYWARE/CERA

Supply and fix vitreous china, wash down water closet pan, white, Pedestal pattern WC (excluding flushing cistern and flush pipe), including PVC seat cover fixed in repair complete all as specified and directed.

Supply and fix in repairs central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed.

Supply and fix wash hand basin, vitreous china, flat back , coloured , of size 1100X490mm with CP waste coupling / waste fitting, 32mm size PVC waste pipe, angle brackets, PVC connection 15mm size, 450mm long of make Prayag/ polytuf, fixed as in repair complete all as specified and directed.

Supply and fix in repair, angular stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions complete all as specified & directed by Engineer-in-charge.

Supply and fix fancy type tubular towel rail Brass CP, 20mm dia, D type, 60cm long between flanges fixed with chromium plated brass screws fixed in repair complete all as specified & directed by Engineer-in-charge.

Supply and fix in repair health CP faucet cast copper alloy, with 1.0m long tube & hook complete all as specified & directed by Engineer-in-charge.

Supply and fix corner glass shelf 300mm (with CP brass bracket) complete all as specified and directed.

Supply and fix soap dish of cast copper alloy, chromium plated (CP), fixed as in repair complete all as specified and directed.

Supply and fix toilet paper holder, cast copper alloy, chromium plated fixed in position, fixed as in repair, complete all as specified and directed.

Material and labour, preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material and labour, for applying one coat of synthetic enameled paint on old steel and iron surfaces over 10 cm width or girth including preparation of surfaces complete all as specified & directed.

Material and labour 18-19mm thick pre laminated particle board (ISI Marked), interior grade, pre laminated one side with decorative choice lamination and other side balancing white lamination as in cup board, kitchen cabinets shutters etc, including 6mm thick teak wood lipping fixed with nails after taking out/dismantling existing damaged articles complete all as specified and directed .

Supply and fix brass CP jet spray with 1.00 metre PVC tube for EWC including complete all as specified and directed Make : PRAYAG or equivalent as approved by GE

Supply and fix bib taps, 15mm bore,fancy type, short body with wall flange, chromium plated, ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair, all as specified.

Material and labour preparation of old decorated plastered or unplastered surfaces of walls , applying two coats of exterior acrylic emulsion paint complete all as specified and directed.

Material and labour preparation of old plastered or unplastered surfaces of walls and applying two coats of interior acrylic emulsion paint complete all as specified and directed.

Material and labour preparation of old plastered or unplastered surfaces of ceiling and applying two coats of interior acrylic emulsion paint complete all as specified and directed.

Material and labour preparation of old surface and applying one coat of texture (altex)/sand due (madrasi dana) etc of colour & pattern as approved by Engineer-in-Charge complolete all as specified and directed.

Material and labour two coats of white wash on wall surfaces including preparation of old decorated surfaces complete all as specified and directed

Material and labour preparation of old decorated plastered or unplastered surfaces of walls including cornices , pilasters etc , applying two coats of oil bound distemper complete all as specified and directed.

Material and labour preparing previously decorated wall surfaces and applying a coat of cement base paint complete all as specified & directed by Engineer-in-charge.

Supply and fix sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm fixed as in repair complete all as specified and directed.

Supply and fix plate rack of stainless steel of size 900mmx 750mm amd 1mm thick with steel shelves and hanging arrangements for utensil, fixed as in repair complete all as specified and directed.

Material and labour factory made prepolished rubber moulded cement concrete type A-1 chequered tiles made by block making machine with strong vibratory compaction of approved colour, design, of size 300mm x 300mm x 22-25mm thick laid over and including 20mm thick screed bed in cement mortar 1:4, including jointed with neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles and dismantling of existing tiles complete all as specified and directed.

Supply and fix Steel work in tubular trusses and tubular posts including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 t including dismantling / taking down existing complete all as specified & directed by Engineer-in-Charge

Supply and fix factory made coloured chequered cement concrete tiles 300mm x 300mm x 22-25mm thick (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, glossy finish, laid over and including 20mm thick screed bed in cement mortar 1:4, complete all as specified and directed.

Material and labour 18 to 20mm thick Baroda green marble stone slabs, width and length as per site requirement (single piece), best quality machine cut and granite polished to be fixed on window cill, cooking plateform, tread, raiser of steps and vertical surfaces etc and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting / rounding of edges and corners where required with and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of old stone slab and removal of debris where requried complete all as specified and directed.

Material and labour 5mm thick printed PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, insulated PVC wall lining, and solid PVC partitions inclusive of solvent cement and fixing at site, fixed as in repair complete all as specified and directed.

Material and labour PVC sheet fillet 35mm wide, 5mm thick for wall paneling, fixed as in repair complete all as specified and directed.

Material and labour plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed.

Supply and fix towel ring of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), fixed as in repairs complete all as specified and directed.

Supply and fix urinal spreader, of PTMT (Minimum weight 60gms) white , suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed.

Supply and fix swivel shower of PTMT any colour with shower arm 195mm long with bend of 45 degree with flange of PTMT any colour (minimum weght 40 gms), fixed as in repair complete all as specified & directed by Engineer-in-charge.

Supply and fix vitreous china urinal partition of size 310mm x 710mm terminating about 40cm above floor line, fixed as in repair complete all as specified and directed.

Material and labour 12mm thick pre laminated particle board , exterior grade, pre laminated both side with decorative choice lamination fixed to aluminum frame work etc, complete all as specified and directed .

Supply and fix Powder coated aluminum grill of standard section including ‘F’ type alumimium anodized beading and complete fixing accessories complete all as specified.

Material and labour 150mm long mild steel helical door springs including roller and roller plate fixed to angle iron door frame including welding etc, fixed as in repair complete all as specified and directed.

Material and labour, plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in surface channel and drain complete all as specified & directed.

Dismantling fencing wire mesh,any type ,complete all as specified & directed by Engineer-in-charge.

Dismantling existing barbed wire of any description and removing to store complete all as specified and directed.

Dismantling of posts or struts of RCC any section incl taking out embedded portion and making good disturbed portion, (posts embedded in concrete or in hard core) complete all as specified and directed

Excavation in post holes (or similar hole) each in hard & dense soil n.exc 0.50 cu m getting out, returning, filling and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus spoil at a distance not exc 50 metre and making good surfaces complete all as specified and directed.

Material and labour plain cement concrete 1:3:6, nominal mix, type C-2 using 40 mm graded stone aggregate as in foundation, filling, mass concrete, bed blocks etc, complete all as specified & directed.

Supply and Fix mild steel work as in iron post / posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-W (Gde.E-250)quality-A or Fe 290 (Gde -E-165) and fixing at site complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed.

Supply only chain link fencing of 3.00 mm dia galvanized steel wire, size of mesh as approved complete all as specified and directed. Note : (i) Fixing included under item No 42 here-in-before. (ii) Unit weight (weight per Square Metre) of chain link fencing shall be derived as per site through a BOO appointed by GE in presence of Contractor's authorised rep and shall be kept in record.

Supply and fix mild steel screw bolt (machine made) with hexagonal at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal n.exc 5cm long, diameter of shank 11-15mm, complete all as specified and directed.

Material and labour mild steel round bars 10mm dia, for horizontal tie bars for fencing post etc including necessary welding with 50mm overlapping complete all as specified and directed.

Material and labour two coats of synthetic enameled paint on steel and iron surfaces over one coat of red oxide primer on primer on surfaces of any description n.exc 10 cm width or girth when unconnected with other painting or when painted in a different tint including preparation of new surfaces complete all as specified & directed.

Supply and fix galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified & directed by Engineer-in-charge. (Note: - Each line wire to be measured).

Material and labour factory made RCC drain covers of size 1200mm x 600mm x 100mm with plain faces, including MS frame, set in position including demolition of old unserviceable RCC covers & removal of debris complete all as specified and directed.

Material and labour factory made RCC drain covers of size 1200mm x 600mm x 80mm with plain faces, including MS frame, set in position including demolition of old unserviceable RCC covers & removal of debris complete all as specified and directed.

Material and labour factory made RCC drain covers of size 1000mm x 600mm x 80mm with plain faces, including MS frame, set in position including demolition of old unserviceable RCC covers & removal of debris complete all as specified and directed.

Supply only 5mm thick plain sheet glass in panels exc 0.5 Square metre in each pane, complete all as specified & directed.

aggarwal traders

Gunjan and Gunjan Associates

G S CONSTRUCTIONS