REPAIRS TO SEWAGE LINE, BRICK WORK, MANHOLE, HARDSTANDING, PATHWAY, FENCING AND CONNECTED ITEMS AT ARTY CENTRE UNDER GE NASIK ROAD CAMP

Amount

Excavation in trenches not exc 1.5m in width and not exc 1.5 in depth for foundation and getting out in any type soil (Hard/Soft loose Soil).

All as per item No 1 above but depth exe 1.5 mtr and not exe.3 mtr

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soil.

Removing excavated materials to a distance not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point

Demolition of RCC in cover slab incuding cutting reinforcement bars to facilitate demolition.

Demolition of brick work built in cement mortar (including coping)

Demolition of breaking up drain pipes of RCC or salt glazed ware set in cement mortar of following dia:-

300mm dia

200mm dia

Demolition of Cement Concrete of any description in ground floor & paving n.exc. 15 cm thick(below or above ground level)

Taking down cement plaster of any description on brick or stone walls or concrete surfaces etc. incl raking out joints, hacking for key scrubbing down with water etc

M&L cement concrete type C-2 (1:3:6) ( 40 mm graded aggregate) as in foundation, filling and mass concrete.

M/L PCC 1:2:4 type B2 as in surface channels and drains & benching of manholes and finishing even and smooth with out using extra cement.

M&L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in coping including necessory formwork.

M&L pre cast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in manhole cover slabs set in cm 1:6 all s specified & directed

M/L mild steel TMT bars 8mm dia cut to length bent to shape required and binding with ms wire anealed not less than 0.9mm dia, complete all as spacified and directed.

M&L for brick work with fly ash brick straight or curved on plan exc. 6 mtr mean radius, built in CM 1:6 with old size bricks.

All as per item No 15 above but except bricks.

S&F reinforced concrete pipe, class NP2 laid and jointed complete with collers 300mm bore of pipe

All as per item No 17. above but 200 mm bore of pipes

M&L for rendering 10mm thick in on fair faces of brick work or concrete surfaces in cement mortar(1:4) finishing even and smooth without using extra cement complete all as specifed and directed

Taking down 100/75 mm dia CI/PVC and cast soil, waste and vent pipes, in any length with or without ears etc in any position

S&F 110 mm dia PVC(SWR) pipes single socketed,in any length with rubber ring joints fixed to walls and making good

S&F in repairs of 110 mm dia PVC(SWR) bends of any radius and making good

S&F in repairs of 110mm dia PVC(SWR) branch piece,single(single Y) equal or unequal and making good

S&F in repairs of 110 mm dia PVC(SWR) junction single,(single T),equal or unequal and making good

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing(, removing serviceable tiles, to stone and rubbish off the premises

M& L Non -skid coloured ceramic joint free tiles 7 to 8mm thick (square/retangular) tiles exc 0.06 Sqm but n.exc 0.11 Sqm each, in floors etc. laid over and including 15mm thick cement mortar screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match.

S & F in repair Vitreous China water closet squatting pan, 'Orrisa' pattern, size 580 x 440 mm white, with integral foot rests and P trap (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding.

S & F in repairs Vitreous china wash down water closet (pedestal pattern), white including plastic water closetseat, closed pattern with flat bottom , and cover and mild steel choromium plated or aluminium hinging device complete fixed.

Dismantling of stone slabs & tiles of any description or thickness (except ceramic tiles) in floors, aprons etc laid bedded & pointed in any mortar complete all as specified and directed.

M & L for rough shahabad stones 25 mm to 30mm thick in flooring/plinth set and jointed in neat cement slurry and pointed in cement mortar 1:4 complete all as specified and directed

M & L for 20 mm thick Screed bed or bedding layer ofcement mortar 1:6 for laying floor finishes

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness(Below or above ground level) un-reinforced complete all as specified and directed.

M & L 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) in sub base of flooring/hard standing.

M & L for rubber moulded machine pressed precast interlocking paver block with gray cement any shape and size confirming to IS 15658-2006 of 60mm thickness, M-25 grade laid on 30mm thick stone dust cushioning laid dry to the profile complete all as specified and directed.

M & L for concrete bed to drain pipe including packing under, and haunching against the sides of the pipe after they are laid and tested in cement concrete 1:4:8 type D2 for 200 mm dia pipe

M & L for concrete bed to drain pipe including packing under, and haunching against the sides of the pipe after they are laid and tested in cement concrete 1:4:8 type D2 for 300 mm dia pipe

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with mixture of white and gray cement in equal proportion and no pigment in floors complete all as specified and directed.

M&L for Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section embeded in concrete, including taking out embedded portion and making good disturbed ground

Excavating in post holes (or similar holes) each n exc 0.5 cum in soft/loose soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface

M & L PCC 1:3:6 type C2 (using 40mm graded aggregate ) in foundation for post holes

Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm, but n exc 250 sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.20 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing as directed by EIC (each line wire to be measured)

Dismantling structural steel work including doors, gates but excluding framed truss etc

S & F Framed work such as MS grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S & F steel work in such post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in , etc., and similar work conforming to Fe-290 Gde E-165 rails braces holdfast etc

S&F mild steel 10m dia and over cut to length, bent to shape requred, including cranking, bending, spirally for hooping for coumns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to TMT bars.

Ditto, but 6mm to 8mm dia

M&L two coat synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10cm in width or girth not otherwise described including preparation of new surfaces.

Dismantling fencing wire mesh, any type

Supply only chain link fencing MS galvanised incl line wire any mesh size & standard rails , straightning bolts etc including providing of binding wire exc 4 kg/sqm

Fixing only chain link fencing including MS galvanised incl line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire exc 4 kg/sqm

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm but n exc 15cm long dia of neck in mm 16 mm to 20 mm complete alll as specified and directed.

S & F rolled mild steel joist, channel, angle, flat section fixed independently without connecting plates or MS tubular sections etc (cut to ordinary length i.e. within 20mm length indicated) grade Fe 290 (E 165) all as directed by Engr in Charge

Alpha Construction

UNITED ENTERPRISES

Vishal Constructions