Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹64.3 LAccepted-AOC 86 NAROTTAM KUNJ MADHU NAGAR AGRA UTTAR PRADESH 282001 | AGRA | UTTAR PRADESH | 282001 | L1 | Accepted-AOC Being Lowest Bidder | |
| 2 | L2₹68.9 L+₹4.5 L (6.93%)Rejected-Finance C 89 CECC VILL POST PATHOLI AGRA UP | AGRA | AGRA | UTTAR PRADESH | 283105 | L2 | Rejected-Finance Being Higher Bidder | |
| 3 | L3₹77.7 L+₹13.3 L (20.6%)Rejected-Finance D 55 HAKIKAT RAI RD ADARSH NAGAR DELHI 33 | L3 | Rejected-Finance Being Higher Bidder | |
| 4 | L4₹82.4 L+₹17.9 L (27.8%)Rejected-Finance 91 DEFENCE ESTATE PHASE II NEAR AMBEDKAR PARK DEORI ROAD AGRA UP | AGRA | UTTAR PRADESH | 282001 | L4 | Rejected-Finance Being Higher Bidder |
Tender Value
₹1.2 Cr
EMD Value
₹1.9 L
Closing Date
19 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE(AF) Agra
HQ CWE(AF) Agra PIN-282008
REPAIR AND RESURFACING OF ROAD AND ALLIED WORKS CONNECTED TO ROAD INCLUDING REPLACEMENT OF ROAD FURNITURE AT VARIOUS LOCATIONS UNDER AGE B/R-I OF GE (AF) ADM AREA, AGRA
2022_MES_537406_1
80022-06/E8
Open Tender
Civil Works - Roads
Item Rate
180 days
GE(AF) Adm Area
As per Tender documents
7 documents required · 7 mandatory
₹1,000
GE(AF) Adm Area, Agra
₹1.9 L
Yes
31 Oct 2022
12 Jul 2022
26 Aug 2022
12 Jul 2022
19 Aug 2022
5 Aug 2022
Amount
Scarifying or picking gravelled, macadam or bituminous macadam surfaces exc 50mm and n.exc. 100mm deep in area n.exc 400 sqm complete all as specified and directed.
M&L for 7.5cm thick (compacted thickness) WBM, with limestone, sand stone, flint or quartizite coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, voids filled with suitable size of boulders, rolled and consolidated to required gradient and camber complete all as specified and directed.
Preparing of unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specifed and directed.
M&L for Applying evenly a priming/tack coat of paving bitumen with bituminous primer VG-10 @ 10 kg per 10 sq metre complete all as specifed and directed
M&L applying bituminous premix asphaltic dense concrete (DAC), 40mm thick (consolidated thickness) with 6% binder content of paving bitumen any penetration of VG-30 grade by weight of total mix including cement filler on surfaces including rolled and compacted with using 8 to 12 tonne capacity power roller to achieve the required compactness, camber and gradent and mixed in hot mix plant using design mix and laid by mechanical paver finisher complete all as specified and directed by the Engineer-in-charge.
M&L for repair to pot holes exc 30mm depth and n.exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surface in roads, paths, etc cutting around edges to at least 25mm in depth and making good by applying tack coat @ 5 Kgs per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with paving bitumen VG-30 grade@ 9.8 Kgs per 10 Sqm and blinded with 0.09 Cum of stone chipping of size 6.3mm and again well rolled with 8 to 12 tonne power roller (Including supply of pre-mixed macadam, binder and chipping) complete all as specified and directed by Engineer-in-Charge.
M&L for preparing existing black top surface or bituminous macadam surface by brushing with wire brushes for removing caked mud and any type of vegetation growth, if any etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags and mechanical blower to remove all loose dirt etc on back top/ concrete surfaces than applying evenly a priming / tack coat with paving bituminous primer VG-10 any penetration over the prepared surface by mechanical sprayer @ 5 Kgs/10 Sqm of surface complete all as specified and directed by the Engineer -in-Charge.
M&L for applying bituminous premix asphaltic dense concrete (DAC), 30mm thick (consolidated thickness) with 6% binder content of paving bitumen any penetration of VG-30 grade by weight of total mix including cement filler, on surfaces rolled compacted with using 8 to 12 tonne capacity power roller to achieve the required compactness, camber and gradent and mixed in hot mix plant using design mix and laid by mechanical paver finisher complete all as specified and directed by the Engineer-in-charge.
M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foreign matters etc to receive the marking and M&L for thermo plastic (Reflective) line marking having 2.0 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MORTH specification 803 clause 4.2.2 on bituminous surfaces in white/yellow colour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MORTH specification 803 clause 4.3.3 complete all as specified and directed. Note - MORTH specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE.
S&F in repair cat eye made of polycarbonate moulded body with electronically welded micro prismatic lense on both side of colour- Yellow/Red/Amber for maximum retro reflection in wet and dry conditions and to be fixed with BT-69 complete all as per manufacturer instructions and specified as directed of Make: series 290 of 3M or equivalent in Dark Eyes/TATA.
S&F in repair road studs made of polycarbonate moulded plastic body of single shank of size 100x100x26mm of min weight of 140gms with electronically welded micro prismatic lense on both side of colour- Yellow/Red/Amber for maximum retro reflection in wet and dry conditions and to be fixed on road with shank as road sign complete all as per manufacturer instructions and specified as directed of Make: Dark eye or equvalent in 3M/TATA
S&F in repair Solar cat eye of size in (mm) 125L x 125B x 25H including stem height 65mm approx housing dia cast aluminium alloy shell, fully waterproof according to IP 67, visual distance upto 500mtr with 6 super bright yellow/red/amber led (3 Nos each side) with flash frequency 2 Hz including solar panel 2.4V/0.3 watt, one Ni-Cd/Ni-mh rechargeable battery 1.2V/1600MA, temprature range 10C to 75C fixed on road for roadway sign complete as per manufacturer’s instruction and approved by GE. Model-DA 110 (DHURV) series of Dark Eye or equivalent in 3M/TATA
S&F in repair delineators made out of 75 mm dia, heavy duty mild steel powder coated pipe of length 1200 mm with ABS round body fitted with 2 Nos 100 mm dia highly reflective reflectors made out of PMMA mounted on it with anti rust and anti theft steel net having weight approx 1760grms, Including necessary excavation and earth work in any type of soil for fixing and embeding the delineator on ground with hold fast using PCC (1:2:4) type B1(using 20mm graded stone agregate) (minimum PCC block size 300mmx300mmx300mm) for proper grouting complete all as specified and directed. Make as model No DA 74 in Dark Eye or equivalent in 3M/TATA.
S&F in repair ABS plastic speed bump/speed breakers in parabolic convex shape and of size 750 mm x 250 mm x 70 mm made out of steady plastic, dovetail interlocking sub units, jointed and fixed to make the bump perfectly uniform, bump made out of precolourd material (black/yellow) and UV stablizers to keep them perfectly colourful, studded with reflectors on either side to make it clearly visible to motorists during night hours complete all as specified and directed.
S&F for road side convex mirror of size 800mm dia(material polycarbonate) mounted on MS pipe of 2.10mtr long and dia of pipe is 80 mm embedded with PCC (1:2:4) type B-1 using (20mm stone graded aggregate) including RFR, removal and two coat of synthetic enamel paint over a coat of zinc chrome primer on MS pipe including necessary excavation and earth work in any type of soil for fixing and embeding the delineator on ground with hold fast with PCC (1:2:4) type B1(using 20mm graded stone agregate) (minimum PCC block size 300mmx300mmx300mm) for proper grouting complete all as specified and directed.
M&L for machine made precast coloured interlocking tiles of shape and size with grey cement and pigment confirming to IS 15658 of 2006 of 60mm thcik M 35 grade laid, jointed over and incl 50 mm thick sand cushioning complete all as specified including dismatling of existing tiling.
Fixing only in repair serviceable interlocking tiles laid, jointed over and including 50mm thick sand cushioning complete all as specified and directed including dismantling of existing interlocking tiles.
Supply and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete of design as approved by GE Complete all as specified and directed & including demolition of kerb stone.
M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate ) as in foundation, filling and Mass concrete etc complete & incl demolition of cement concrete complete all as directed.
M&L Providing precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in cover slab, shelve, bed plates set in CM (1:4), including chamfers, weatherings, throating etc & including demolition of reenforced cement concrete complete all as directed.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending spirally for hooping for columns, hooking with and inlcuding mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Complete removal of extisting finishes,Preparation of old decorated surface of cement or plastered surfaces of any description over 10cm girth or width, not otherwise described of any description and girth and applying two coats of Synthetic enamel paint ( glossy type) over a coat of priming paint plaster as per pattern and colour approved by GE complete all as specified and directed.
Preparation of new or previously untreated surface of cement or plastered surfaces of any description over 10cm girth or width, not otherwise described of any description and girth and applying two coats of Synthetic enamel paint over a coat of priming paint plaster.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .