Construction of Gym Building with Equipments in Sathambakkam Panchayat in Walajah Block

Amount

Earth work excavation for foundation in all classes of soils and sub soil to full depth except in hard rock requiring blasting but inclusive of shoring strutting if required for the sides of foundation.

CC 1:4:8 mix using 40mm HBG metal including cost and conveyance and all labour charges and materials charges etc,..

Supply and fabrication of steel including cost and conveyance and all labour charges etc. complete.

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. Grade beam Main wall alround two sides

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. column 0.23 x 0.38

Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc. Main building front side

Brick work in CM 1:5 mix using country bricks including cost and conveyance and all labour charge etc.,

ROLLING SHUTTERS (WITH ISI MONOGRAM) including cost and conveyance of all labour charges etc completed.,

Supply and fixind for Girl work including cost and conveyance of all labour charges etc completed.,

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

window - w

Labour charges for fixing doors along with frames in position etc complete Door - D

Labour charges for fixing windows along with frames in position etc complete Window - w

Weathering coarse concrete using 20mm size broken brick jelly with in pure slaked lime over the RCC Roof in the proportion of 32 : 12 1/2 by volume laid in layer beating the concrete with the wooden batters etc as per standard specifications .

Finishing Top of Roof with one Couse of pressed Tiles set in cm:1:3 Mix using tiles of size 23x23x2 cm etc

Supplying and Painting the walls with single coat of JSW wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work)

Plastering with cement mortar 1:5, 12mm thick including cost and conveyance and all labour charges etc.

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three M.Sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Colour washing two coats with approved plastic emulsion paint inlcuding cost and conveyance and all labour charges etc,..completed..

Colour washing two coats with approved Distember paint inlcuding cost and conveyance and all labour charges etc,..completed..

Painting with two coats over new iron work using synthetic enamel paint including all

Provision for Light point

Provision for Fan point

Supply and fixing of 48" ceiling fan

Provision for DPTC

Provision for Plug point

Supply and fixing of Tub light

Supply and fixing of CFL

Supply and run of Service connection wire

Supply and fixing of service board

Supply and fixing of Bulk head fitting

Supply and fixing of 25 mm dia GI pipe

Supply for Gym Equipments

SAI TRADERS (BID ID -1415454)