Repairing, servicing of 15 KVA DEA sets replacement of starting

Identifying the faults & parts to be replaced for the existing 15/20 KVA E/A set i/c arranging the Skilled / semiskilled personnel to the site, Cleaning the E/A set , removing the dust, Arranging the suitable capacity Lead Acid Battery on rental basis for kick starting the E/A set and diesel of sufficient quantity in a separate container with diesel hoses for temporary connection and pumping the diesel to the Engine Fuel pump etc .i/c attending very minor faults if any relevant to the E/A set etc as reqd. ( Note : A report shall be submitted as per format in Annexure A)

Pdg & Making of General Servicing of the following capacity E/A sets of different make and model installed at TE/BTS Sites i/c replacement of Lub oil ,lub oil filter and diesel filter and cleaning of all parts/Fuel tank cleaning of DG set like fuel line ,cooling system ,checking of all DG control wiring , Driving belts and drives for proper working as per manufacturer recommendations complete as per manufacturer recommendation i/c Fare and labour charge i/c complete as reqd.(Note: 1). Diesel for initial testing of DG set will be arranged by the contractor 2). The recovered black oil shall be given to contractor . etc. as required. (for 15/20 KVA DEA set).

Providing and fixing of following items in the existing EA set i/c removing the worn-out items , dis-assembling / assembling , testing and commissioning etc as reqd.

Diesel Hose including banjo bolt and clip

V-Belt.

Battery Leads (Flexible) of length not less than 0.6 Meters with terminals.

Starting key

AVR suitable for 15/20 KVA DEA set

Repairing and servicing of FIP i/c replacement of faulty components, testing, calibration etc. complete as reqd . UP to 20 KVA EA SET

Providing of battery charger of 12 Volt, 10 Amp SMPS type with constant current & constant voltage including protecting arrangement i.e overcharging complete with fully automatic faunctioning i/c connecting lead and clamp etc as required.

Repairing of 12 volt self starter for 15/20 KVA DEA set, through servicing & overhauling the self starter i/c rewinding the rotor armature coil by suitable size insulated copper wire, heat vernishing the same and repalcement of faulty spares viz.Solinoid Switch, Bush, bearing, carbon, pinion etc as necessary, refitting & testing etc complete as reqd.

Supply of 12V, 100 AH lead acid Battery (For EA rating 15/20 KVA) . Make: Exide, Model-XP1000 or S.S

Transportation of 1 No 12 V, 100 AH Lead Acid battery i/c initial charging, installation & commissioning with exchange load etc. completed as required.

Repairing of control wiring of existing Conventional control panel of DEA set i/c repairing/ replacement of damaged wiring with same rating and size of Cu. Wire for effective control wiring complete all as required. (Without replacing of faulty parts)