Improvement of Type-I field staff quarter at Dapada (CR).

Amount

Dismentaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(ii) A.C. sheet roofing.

Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site of work with all lead and lift.

Excavationfor foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A) Loose or soft soil.

Providing material and labour for filling in foundation and plinth with RUBBLE under floors including filling gravel in gaps and consolidating deposited layers by ramming water etc. complete.

Providing and laying cement concrete 1:3:6 (1 Cement :3 coarse sand : 6 hand broken stone aggregates 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth.(with material & labour).

Providing material and labour for corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.

Providing material and labour for Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of read lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like.

Providing material and labour for laying 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 (1-cement:3-sand) Extra over items 58 to 64 for finishing with a floating coat of neat cement slurry.

Providing material and labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(A) Modular & curing complete.

Providing material and labour for Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (A) in superstucture up to floor two level & curing complete.

Providing material and labour for laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete including cost of formwork but excluding the cost of reinforcement for reinforced concrete work in (B) Slabs, landing, shelves, Balconis , Lintels, Coping, Wallcap, Beams, Girders and Cantilever upto floor two level.

Providing material and labour for TMT Bar FE 415 reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level.

Providing material and labour for laying Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete

Providing material and labour for 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) finishing with a floating coat of neat cement slurry. (upto 10 ton) & curing etc. complete.

Providing material and labour for making BLACK KADAPPA STONE SHELVES & sitting arrangement & platform having 25 to 30 mm thick stone including making groove in walls and same as refilling by C.M. 1:4 including moulding to all exposed surface of stone as directed by Engineer in-charge.

Providing material & labour for Painting two coats (excluding priming coat) on new steel and other metal surface with synthetic enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

Providing and laying chequered terrazo tiles 22mm thick with marble chips of sizes upto 6mm in floors on 25mm thick bed of Lime mortar 1:1.5 (1-Lime putty : 1.5 coarse sand) or C.M. 1:6 (1 -cement :6 - coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete. (A) Light shades using white cement

Providing material & labour for fixing FRP frame size 125x65 mm and 35mm thick FRP shutter with wood grain raised panneled design finish shutter having extra reinforcement on sides & edges in Gel coat finish. The core of the shutter & frame is to be filed up with injected polyurethene foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to be water proof weather proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with fastener sleeve & alluminium fixtures & fastenings.

Providing material and labour for laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white cement.

Providing material and labour for laying coloured glazed tiles of the size 300 mm x 200 mm x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with white cement slurry.

Providing material and labour for fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) Vitreous China.(I) Long pattern = White colour.

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated screws down Bib Tap. (i) 15mm dia.

Providing material and labour for fixing PVC printed false ceiling with flush type with alluminium frame, frame work is done with three different sections of G.I. sheet of 24 gauge thickness named as C, U and L. The C section is fixed with hangers at an equal distance of 36” each and then U section is fixed perpendicular on C section with steel screws at and equal distance of 16” each. The complete frame work is supported by G.I. L angle/6 mm rod hangers from the roof and L sections is fixed all around the wall as shown in the diagram. 5mm PVC sheet strips of size 2 wide are fixd with counter sunk steel screws on the U section. Further 3mm PVC sheet is stuck to these PVC strips with solvent cement such that joining lines are perfectly matched. P.U. putty is filled, dried and leveled and requisite coats of primer and paint is done on the ceiling for getting fine surface finish etc. complete as per direction of Engineering and charge manufacturer’s specification and drawing

Providing and erecting approved make ceiling fan with double ball bearing ISI mark with condenser 230 Volt A.C. 50Hz. 1200mm sweep complete having 4blades aluminium body and blade sets having ornamental design shanks, canopy &^ 30cms. Down road erected with 24/0.2,3 core flexible wire earthing (make shall be approved by engineer in charge).

Point wiring for Light / Bell with 2-1.0 sq.mm & earthwire of 1.0 sq.mm (green) both are of ISI market FR PVC insulated multistrand copper wires, in existing pipe duly erected complete with 6 A moduler type switch/ bell push & accessories and earth continuity of follwing type, erected on PVC/Metalic box covered with appropriate front plate modules erected in wall/ celling (B) Single mounting base-frame & textured / Metalic front plates.

Point using for Looped Plug with 2-1.0sq.mm & earthwire of 1.0 Sq.mm (green) both are of ISI marked FR PVC insulated multistandard copper wires, in existing pipe duly erected complete with ISI marked 3 pin 6A socket and 6A Tissiono type switch erected with earth continuity connection for open wiring. C18.

Mains with 1.1KV grade FRPVC insulated ISI marked stranded copper conductor wire in existing pipe erected with 1.5sq.mm copper conductor FR PVC insulated wire of green color for earth continuity of following size (c) 2 wire 2.5 Sq.mm.

Mains with 1.1KV grade FRPVC insulated ISI marked stranded copper conductor wire in existing pipe erected with 1.5sq.mm copper conductor FR PVC insulated wire of green color for earth continuity of following size (c) 2 wire 4 Sq.mm.

Supplying and erecting PVC trunking (PVC casing capping) having double locking arrangement with grooves, trunking of size not below 12.5mm in height as per IS 14927 part-I of 2001 and with accessories of PVC/resin polypropylene not below 1.8mm thick duly sealed in joint and erected on wall/ceilling of following size make prestoplast/standard (b) 25mm.

Approved make ELCBS/RCCBS conforming to IS: 12640 and having sensitivity of 30MA and short circuit withstand capacity of 6KA suitable for operationn on 3 Phase and neutral 415V. Having characteristic of quick action & tripping with all advance feature & do not incoporate any electronic component for folloeing max. rating for 63mp Cat-III Make:- L&T/MDS/HAVELLS/GE.

Providing and erecting thermo-plastic ELCON CLIPSAL (IP) or equivalent moulded distribution box for mounting MCB/ELCB having DIN rail transparent moulded flap 100 Amp. Copper bus strip for (Without MCB/ELCB) (B) 12 way single phase.

Providing material & labour for fixing to wall, ceiling and floor galvanised mid steel tubes (Medium grade) of the following nominakl bore, tube fitting and clamps including making good the wall ceiling and foore 25mm dia.

Providing material & labour for fixing to wall, ceiling and floor galvanised mid steel tubes (Medium grade) of the following nominakl bore, tube fitting and clamps including making good the wall ceiling and foore. (F) 50mm.

Providing material and labour for fixing ridges or hips 600 mm overall in plain G.I. sheet class-3 fixed with G.I.J. or L Hooks and nuts 8mm dia G.I. Limpet and bitumen washer complete. (1) 0.80 mm thick sheet.

Providing material and labour for constructing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed. (upto 10 ton)

Providing and laying (to level or slopes) and jointing with stiff mixture of Cement Mortar in proportion 1:1 Selt glazed stoneware pipes including testing of pipes and joints complete.(B) 150mm dia. (upto 10 ton)

Providing material and labour for Supplying Rotationally moulded HDPE storage tank with ISI mark of approved make including all taxes transportation octroi etc. complete (1000 liter).

Providing and fixing Ball Cock of approved quality as directed (A) Copper Metal (ii) 50mm dia.

Providing material and labour for Constructing brick masonry road gully chamber 1100mm x 775mm including 500mm x 450mm (C.I. horizontal grating with frame and vertical grating complete.) (upto 10 ton)

Providing and fixing in Cement Mortar 1:3 (1-Cement : 3-coarse sand)a, pair of white vitreous China 250mm x 130mm x 30mm footrest to long pattern squatting pan water closet.

Providing material and labour for fixing cast iron spigot and soket soil waste and ventilating pipes of the following nominal size. © 100mm dia.

Providing material and labour for fixing in Position cowel went to pipes. © 100mm dia.

Providing and fixing 100mm size P or S trap for water closet squatting pan including jointing the trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China.

Providing and fixing cast iron (Spun) Nahni trap of the following nominal diameter of self cleaning design with C.I. screaed down or higned grating including cost of cutting and making good the walls and floor 100mm inlet and 50mm outlet.

Providing material and labour for fixing tiles roofing with manglore tiles including teak reepers of sizes 50mm x 25mm.

Drilling of 215 mm dia bore hole in overburden strata (allternate layers of lime stone & yellow sticky clay formation) by DTH Rig upto required depth (Approx upto 70mt ) including fixing of 175/180 dia ERW/PVC pi;es (black & slotted) & if required further drilling of strata by DTH drillng method upto total depth of 120 mtr. including measuring 165mm dia bore hole in hard rock (trap etc.) strata by DTH drilling method up to total depth of 120mtr. including measuring the yield by V notch and flushing of bore etc complete.

Providing supply & laying in standard length ISI marked rigid unplastical PVC pipes suitable for portable water with ring fit 200mm dia,6kg/cm2.(with material & Labour).

Providing material and labour for Supplying & Fixing of 5.00 H.P. 10 stage Submersible Pumpset of 3 phase connection, best make type bearing ISI mark and manufactered as per IS 8034/1989 having discharge capacity 280 to 240 LPM branded at 69 to 60 mt. Head minimum to give the run for pump and motor for 72 hours including oil merged make starter, 100 mt. 4 Sq.mmm cable 3 core & labour charge and one year gurantee card along with ISI certificate including cost of all accessories (for 50mm dia delivery Pipe).

Providing material and labour for Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.

Providing material & labour for laying 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & cleaning the surface etc. complete for DARK shade.

Providing and erecting XLPE(IS:7098) (I) -88 ISI armoured cable multistrand aluminium conductor for 1.1 K.V. to be laid on wall with necessary clamos or in existing trench/pipe of following size of cables.(d) 4 core 16 Sq.m.

Supplying of One No SP 16 A switch and one No. 6/16 A Universal socket combined with indicator and fuse.

Providing material & labour supplying casting stacking spreading and levelling of good quality of Hard Murrum at site of work as directed.

aklingji construction