SPL REPAIR TO BLDG NO P-19 AND T-124 AT DRUGMULLA GRN UNDER GE 874 EWS

Demolition of unreinforcement cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6, type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection finished even and fair without using extra cement complete all as specified and directed.

S&F for glass dividing strips, 3 mm thick ,38 mm wide complete all as specified and directed.

M&L for machine cut Kota stone flooring 20-25mm thick over and including 20mm thick cement screed 1: 6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed.

M&L non skid ceramic tiles 7 to 8 mm thick area of each tiles exc 0.18 sqm but not exc 0.36 sqm, laid in floors etc., set and jointed in neat cement slurry and pointed in white cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar 1:6 including necessary cutting and waste as per site requirement, Including dismantling floor, hearth or wall tilling including cement mortar bedding removing serviceable tile to rubbish of the premises complete all as specified and directed by Engineer-in-Charge.

M&L for non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 15mm thick rendering in cement mortar 1:6, Including dismantling floor ,hearth or wall tilling including cement mortar bedding removing serviceable tile to rubbish of the premises complete all as specified & directed.

M&L for glazed ceramic coloured tiles (600mm x 300mm and 7mm) thick, as in vertical surface such as in skirting and dado etc., set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick rendering in cement mortar 1:4, including dismantling floor, hearth or wall tilling including cement mortar bedding removing serviceable tile to rubbish of the premises complete all as specified & directed.

S&F vitrified ceramic tiles light shade approved quality10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15 thick screed mortar in cement mortar 1:6, including dismantling floor, hearth or wall tilling including cement mortar bedding removing serviceable tile to rubbish of the premises complete all as specified and directed.

M&L pergo tiles the surface board, Kiln seasoned imported maple wood surface board finished with 21 mm thick, 55 to 85 mm width and in random length in tongue and groove shape. The edges of the boards will have a finger lock grove and the bottom side with air pass groove. The Under Frame : Made of Commercial quality Fir/Spruce/Pine wood runners of 70 mm x 45 mm treated with anti - termite solution and fixed on the bottom side with 10 mm thick EPDM air cushioning pads by nails through the two wings at 350 mm c/c.The Installation :Avapro barrier will be placed on the levelled IPS sub floor before laying the under Frame. The runners having air cell cushioning pads will be placed on the vapour barrier in perfect level at 350 mm c/c in one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap to 8 to 10 mm will be left open between the wooden flooring and the surrounding tiled area/wall. The finishing :after installation the floor will be machine sanded with floor sander machine and finished with Polyurethane lacquer. The game line marking to be carried out in required colours before applying the finish coat including dismantling of old unserviceable Pergo tile complete all as specified and directed.