Construction of Service Road from Shyam Nagar to Meera Medpat 80ft. Road (Chitrkoot Nagar) on Bhuwna Pratap Nagar 200ft. Road. 2805

Item Code [ Rd 2025 3.9.2 Excavation in Hard Rock ]:Item Type [road] :: Sub Item Code [ Rd 2025 3.9.2 Excavation in Hard Rock + 3.9.2-B]: Excavation for roadway in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal with a lift upto 1.5 m and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections as per MoRTH Specification Clause 301.3. Mechanical Means

Item Code [2025 12.5 III m-20]:Item Type [road] :: Plain/reinforced cement concrete in substructure complete as per drawings and MoRTH specification Clauses 1700 and 2200 R.C.C grade M 20

Item Code [2025 12.7]:Item Type [road] :: Supplying, fitting and placing TMT bar reinforcement (Fe 415) in sub structrue complete as per drawings and MoRTH specification Clauses 1009,1600 & 2202

Item Code [2025 17.7]:Item Type [road] :: Providing and erectinga"W"metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail ,70cm above road/ ground level, fixed on CRC rolled channel vertical post,150x75x5mm spaced 2mm centre to centre, 1.8m high, 1.1m below ground /road level, all steel parts and fitments to be galvanized by hot dip process ,all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150x75x5mm, 330mm long complete as per MoRTH specification Clause 811.3.

Item Code [2025 3.14]:Item Type [road] :: Construction of sub grade and earth enshoulders with approved material obtained from borrow pits with all lifts and leads , transporting to site, spreading, grading to requireds lope and compacted to meet requirement of Table 300 - 2 with lead up to 50 m as per MoRTH Specification Clause 305.3

Item Code [2025 3.5(iii) ]:Item Type [road] :: Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 m Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per MoRTH Specification Clause 301.3

Item Code [2025 3.8 (iii)]:Item Type [road] :: Excavation for roadway in ordinary rock with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, transporting to embankment site with a lift upto 1.5 m and lead upto 1000 m, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per MoRTH Specification Clause 301.3.5

Item Code [2025 4.9 A i]:Item Type [road] :: Providing crushed run stone aggregate greading conforming to table400-14 depositing on aprepared surface by hauling vehicles ,spreading and mixing with a motor grader, watering and compacting with a three wheel 80-100 kN static roller as per MoRTH Specification Clause 407 to form a layer of sub-base/base By mix-in-place method With 53 mm maximum size of aggregates

Item Code [2025 5.1]:Item Type [road] ::Prime Coat Sub Item Code [2025 5.1 + (i)]: Prime Coat Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base (WBM/WMM) including cleaning of road surface and spraying primer at the rate of 0.70-1.0kg/sqm using mechanical means as per MoRTH Specification Clause 502

Item Code [2025 5.2 i]:Item Type [road] :: Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per MoRTH Specification Clause 503.