SWM 2.0 2323-2024

Amount

Features{ [Vacuum Pump - (Type - Rotary Sliding Vane) (Lubrication - Forged oil Lubrication) (Cooling - Aircoold)] [Suction Hose ( Dia\Length \Qty - 4" / 3 mtr. / 10 Nos with suitable Clamp & Washer and holder in both side of tanker)] [Sludge Suction & Drain Valve -( Size - 4") -( Type - Knife gate / Ball valve Heavy duty (For Suction and Delivery Separately.) ]- [Hyd.Pump - (Type - Not Applicable) - (Drive - Not Applicable)]} Capacity {[ Tank ( Volume Water Storage Tank -1000 Litre Sludge Storage Tank -5000 Litre Built by 6 mm thick MS plate manually open type Rear door and another side fixed dish end type. In Sludge Tank side inner slide plate must provided at an angle of 7 degree, and also provide Reinforecement to avoid bulkiness in Vaccum and Pressure operation)] [Vacuum Pump ( Make - Imported Brand only - Jurop / Moro / Gardner Denver Mistrel / Battioni only) ( Flow / Vacuum - 500-550 Cum ./Hr./90%) ( Mode of operation - Suction and Pressure)] [ Jetting Pump - (Make - Pratissoli or equivalent imported make only) (Working Pressure - 150-160 bar) (Hose Length - 120 m - Imported brand only) (Size - 3/4" dia) - (Water Flow for Pump of Jetting Machine - 80-100 Lpm) - (Minimum Brust pressureof Jetting Hose - 250-300 Bar) - (Maximum Working Pressure of Jetting Hose - 100-120 Bar)]} Safety {[Water Level Indicator -(Type/Qty - Tube type / 2 Nos - 2" Dia.)] [ Pressure relief Valve - (Size/Qty - 2"/1 No)] [Vacuum relief Valve - (Size/Qty - 1.5"/1 No)] [ Gauges - (Size/Qty - 6" dial Vaccum gauge & Pressure gauge separately.)]} Mounting {[Chassis - (GVW - 12 TON) - (Emission Norms - As per Local RTO) - (chassis Engine output - Min.90 HP) - (Driver’s Cabin Type - Single (Day) Cabin) - (Make - Ashok Layland/ Tata/ Eicher/ Equivalent with PTO with emission norms BSVI) - (Make/Model/wb/hp/Side PTO Provision - Any other equivalent model of other chassis manufacturers) - (Scope - Customer) ( Side PTO Provision - Provision required )]} Dimensions {[Equipment (Equipment Length - 4500-5150 mm Approx) - (Equipment height - 1500-2200 mm Approx) - (Overall width - 2000-2250 mm Approx) - (Overall Length - 3000-3500 mm Approx) - (Equipment rear overhang - 600-1600 mm Approx)]} Painting{[Surface Preparation and finish (Eqiuipments Exterior - Spray-painted with two coats of superior qulity of enamel metal paint Colour code will be as per customer requirements) (Tank's interior - coated with 2 coats of superior quality anti-corrosive gray epoxy paint)]} -For the first one year the maintenance cost per Cesspool Tanker and also Commissioning of vehicle and Training of Concern TP's operator for a period of minimum one week shall be the responsibility of the supplier.

Chenduran Enterprises Private Limited