Providing footpath and play materials to Marvel parambariyam park in ward no 10, North Zone.

Earth work Excavation in all soild with initial lead and lift etc., complete for drain

Cement concrete 1:4:8 (one cement, four sand and Eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted, etc., complete complying with standard specification.

Supplying and erecting centering to sides and soffits including supports and strutting for sides and culvert body wall sides using 90cm x 60cm and B.G 10stifened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding laid over (silver oak joists ) of size 10cm x 6.50cm spread at about 90cm etc. complete complying with standard specification .

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification.

Supply stocking and filling of Quary dust including all conveyance and consolidation cost etc complete.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification

Conveyance of excavated earth from the site 5Km lead including loading and unloading etc completed

Supply and fixing of slide with Ladder park model using 2Nos of 35mm dia MS.pipe of 14 SWG for standing and sliding, Platform sheet of size 0.45m x 0.90m made of S.S sheet of 16 SWG. Sliding sheet of size 2.40m x 0.45m made of fibre sheet of 14 SWG, and side rails for child to hold while. Climbing is made of 75mm x 25mm thick 14 SWG to a length of 4.50m for both sides. The entire assembly is treated with zinc chromate one coat and enamel paint two coats of three different colours finishing with attractively including all materials and labour charges etc complete.

Supply and fixing of U-model twin sea saw four seater using 65mm dia M.S.pipe of 3mm thick to a length of 4.90m and supported assembly bars using 50mm dia M.S.pipe of 3mm to a length of 2.10 m each for 2 Nos. The four seater of circular type of 250mm dia S.S sheet of 16 SWG. The entire assembly is treated with zinc chromate one coat and enamel paint two coats of three different colours finishing with attractively including all materials and labour charges etc complete.

Supply and Fixing of Two seater swing using 3m long 65mm dia M.S.pipe of 3mm thick. The Slide supports are 3m long 50mm dia M.S pipe of 3mm thick. The 3 way sockets using 3mm M.S.plate and grip the entire unit rigidly. Two swing clamp with ‘U’ and ‘S’ hooks are provided to the swing seat made out of 25 x 25 mm S.S square tube of 14 SWG with stain less steel plates of a grade 304 and size of 500mm x 250mm of 16 SWG and hooks are fitted with 8mm thick tested chain 2 Nos of length 9.80M. The entire assembly is treated with zinc chromate one coat and enamel paint two coats of three different colours finishing with attractively including all materials and labour charges etc complete.

Supply and fixing of merry-Go-Round using M.S pipe of 50 dia and 4mm length of 1.80m height as central pipe and bearing assembly outer pipe size of 125mm dia and 8mm thick and the unit should be assembled to a length of 250 mm. The merry go round of 6 seater of 300mm x 360mm square of 2 mm length M.S sheet and arms are welded made out of 20mm dia M.S pipe and the supported pipe of size 32 mm dia square M.S.pipe of SWG to a length of 1.80m each. The entire assembly is treated with zinc chromate one coat and enamel paint two coats of three different colours finishing with attractively including all materials and labour charges etc complete.

Supply and fixing of ornamental Park benches of size 1.20m x 0.45m each for leg and rest. The seat using 100 mm x 25 mm M.S. rectangular section of 14 SWG and the leg using 50 mm dia M.S.pipe of 3mm. The benches are treated with zinc chromate approved by the engineer before use on work.

Supply and Filling with well gravel layer by layer including cost of watering,consolidation,ramming and cost and conveyance of all materials etc., complete as per specifications.

Providing Pile foundation of size 300 mm dia using augur including labour charges and all other tools and plants charges etc. , as per direction of dept officers

Supply, Erection of 4 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 4000mm Length

Supply and fixing of 45W LED Street Light fitting including cost and conveyance of all materials and all labour charges etc complete with Rate of life of lamps - 50000 burning hours complete as per derpartmental officer

Supply and fixing of SP-6A to 32A,10KA MCB 240V 50Hz AC Supply suitable for lighting circuit

Supply,delivery and installation of 3 Core 1.0 Sq.mm copper cable with length of 9 meters with IP 66 Female connector in one end suitable to connect with Male connector in the LED Fittings as per the direction of departmental officer

Supply and Laying of 4x16 Sq.mm PVC armoured LTUG Cable and 40mm HDPE pipe in a trench to be excavated at a depth of 0.75 metre putting 0.15 Metre.Layer of sand and covering the cable completely with bricks and sand refilling the earth to make good

Supply of Astronomical Weekly Programmable Timer Switch etc Complete as per directional of Departmental Officers.

Add :- GST @ 18%