Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.9 LAccepted-AOC 2ND FLOOR COMMERCE CENTRE KULUR KAVOOR ROAD KULUR MANGALORE D K 575 013 | DAKSHINA KANNADA | KARNATAKA | 575013 | L1 | Accepted-AOC Accepted by CA since the bidder is L1 | |
| 2 | L2₹4.4 L+₹53,646 (13.9%)Rejected-AOC SEETHA NILAYA MADYA SURATHKAL | DAKSHINA KANNADA | KARNATAKA | 574107 | L2 | Rejected-AOC L2 | |
| 3 | L3₹4.4 L+₹54,995 (14.2%)Rejected-AOC H N 11 MALLIKARJUN HOUSING SOCIETY BEHIND VIJAY HOTEL CHANDRANATH NAGAR HUBBALLI 580032 | DHARWAD | KARNATAKA | 580032 | L3 | Rejected-AOC L3 | |
| 4 | L4₹4.9 L+₹99,792 (25.8%)Rejected-AOC D NO 1 71 48 NANDAGOKULA MSEZ COLONY ROAD NO 20 KODIKERE KULAI DAKSHINA KANNADA KARNATAKA 575019 | DAKSHINA KANNADA | KARNATAKA | 575019 | L4 | Rejected-AOC L4 |
| Sl No | Description | Qty | Unit | M/s Anugraha power services L1 | Raaj power solutions and facilities L4 | SHRI SOMALINGESHWARA ELECTRICALS L3 | SUDHIR ELECTRICALS L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Fabricating supplying and mounting MS box made out 16 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint & finally finished with approved colour enamelled metal paint, naming of incoming and outgoings, wiring etc. Approximate Size of panel: 100x100x30cm | 42,800 | Sq. cms | 0.4 ₹17,120 | 0.25 ₹10,700 Lowest | 0.39 ₹16,692 | 0.3 ₹12,840 |
| 2.00 | Supplying and fixing Four Pole 250 Amps 25 kA Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle, including spreaders for MCCBs and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Microprocessor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short- Circuit /Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. Make: Legrand, ABB, L&T, Schnider | 1 | Number | 15,000 ₹15,000 | 12,000 ₹12,000 | 11,245 ₹11,245 Lowest | 12,000 ₹12,000 |
| 3.00 | Supplying and fixing Four Pole 160 Amps 25 kA Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle, including spreaders for MCCBs and wiring complete. Protection of Overload and Short circuit in Thermal Magnetic Release. Microprocessor release shall have Earth Fault as per IS-13947. (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short- Circuit /Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism. Make: Legrand, ABB, L&T, Schnider | 3 | Number | 9,000 ₹27,000 | 10,000 ₹30,000 | 8,151 ₹24,453 | 8,000 ₹24,000 Lowest |
| 4.00 | Supplying 250 Amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic / FRP / DMC insulator which are mounted on powder coated 40x6mm M.S. flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. SIZE: 250 Amps 4X30X10mm Aluminium Strip | 3 | Meter | 3,500 ₹10,500 | 2,500 ₹7,500 | 3,125.85 ₹9,378 | 2,100 ₹6,300 Lowest |
| 5.00 | Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. | 3 | Number | 350 ₹1,050 | 250 ₹750 Lowest | 260 ₹780 | 387.54 ₹1,163 |
| 6.00 | Supply, fixing and wiring 50/5 to 400/5 amps 5 VA burden Current Transformer. Class 0.5 accuracy with tape wound | 3 | Number | 500 ₹1,500 | 450 ₹1,350 | 512.2 ₹1,537 | 422.91 ₹1,269 Lowest |
| 7.00 | Supplying of multifunction digital meter with three-line backlight LCD type display for voltage, Current, frequency, Power, power factor, kVA, kWH, kVAR suitable for 3phase, 4wire LT network with IP54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy. Make: L&T, ABB, Elmeasure, Select. | 1 | Number | 5,500 ₹5,500 | 8,500 ₹8,500 | 4,691.7 ₹4,692 Lowest | 7,009.54 ₹7,010 |
| 8.00 | Supplying of 3.5 core 95 Sq mm (21 GI strips – 4 x 0.8 mm) 1.1 kV, XLPE or Heat resistant PVC insulated, PVC extruded Inner Sheath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 | 180 | Meter | 400 ₹72,000 | 425 ₹76,500 | 526.5 ₹94,770 | 210 ₹37,800 Lowest |
| 9.00 | Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift Up to 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work. In all kinds of soils, Depth upto 1,50 m (100 x 0.5 x 0.7mtr) | 35 | CMT | 200 ₹7,000 Lowest | 250 ₹8,750 | 286 ₹10,010 | 250 ₹8,750 |
| 10.00 | Labour charges for laying of 95 Sq mm size of 1.1 kV class LT UG cable in existing trench / stoneware pipe / on pole / on wall. using Woodens / Aluminium Rollers as directed by the departmental staff | 180 | Meter | 15 ₹2,700 Lowest | 15 ₹2,700 Lowest | 15.6 ₹2,808 | 20 ₹3,600 |
Tender Value
₹5.2 L
Closing Date
1 Sept 2025, 3:00 pmClosed
Dy Director
Dy. Director, NITK Surathkal Srinivasnagar
Providing LT UG cables and electrical wiring works for the Air Conditioner inside ISH building in NITK
2025_NITK_874020_1
Tender No.17/2025-26/HD
Open Tender
Electrical Works
Works
45 days
NITK SURATHKAL SRINIVASNAGAR
As per Tender Documents
9 documents required · 9 mandatory
₹0
Exempted
20 Nov 2025
20 Aug 2025
2 Sept 2025
21 Aug 2025
1 Sept 2025
21 Aug 2025
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .