SPL REPAIR TO BLDG NO. P-768 (OR LIVING) AT OTM-IV AGAINST (JOB NO 81 SA/BTD/SR(BLDG)04/2024-25) UNDER GE(N) BATHINDA AT BATHINDA MIL STN

Amount

Taking down chowkhats or frames with shutters of PVC door , wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed by Engineer-in- charge.

Taking down chowkhats or frames with shutters of PVC door ,wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 Sqm each complete all as specified and as directed by Engineer-in- charge.

Supply & fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /cupboard frame/ Chowkhat of Size 45mm x 70 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length with and including Supply & fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges with and making good with plastering/rendering etc. around the finished opening of the distrubed surface with Cement Mortar 1:4 complete all as specified and as directed by Engineer-in- charge.

Supply & fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /Chowkhat of Size 50mm x 125 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length with and including Supply & fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges with and making good with plastering/rendering etc. around the finished opening of the distrubed surface with Cement Mortar 1:4 complete all as specified and as directed by Engineer-in- charge.

Supply & fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm modulus of elasticity 850N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retardant and with and including Supply & Fixing of 02 Nos (per Leaf) SS 150mm long Tower Bolt with Stainlessd steel screws and including Supply & fixing of 02 Nos SS 150mm long handle with Stainlessd steel screws and 300 mm SS sliding door bolt with Stainlessd steel screws complete all specified and directed by Engineer -in-charge. Note:- The rate of 02 Nos. SS 150mm long Tower Bolt . 02 Nos. SS 150mm long handle and 300 mm SS sliding door bolt is included in this item and nothing shall be paid extra on this account.

Supply & Fixing Factory Made 30mm thick Solid WPC ( Wood polymer Composite ) Wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension rade ), calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cum , having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter for fixing Mosquito mesh and XTN aluminium mesh together on panel area of door except stiles and rails to be panelled with and including mesh with self tapping round headed scresws at required distance, screws and edges covered with feathered pvc edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws with and including 03 Nos door Stainless steel butt hings 100mm long with Stainlessd steel screws for each , 02 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked) conforming to IS 15833-2009, 2 Nos stainless steel handles, 125 mm long, (ISI marked) conforming to IS 208-2020 , 01 No. of helical door spring of 300 mm length including taking down of existing shutter complete all as specified and as directed by Engineer-in-charge. Note: 1. Material test certificate of all the items and authentication should be compulsory provided by the manufacturing company 2. The rate of 03 Nos door Stainless steel butt hings 100mm long with Stainlessd steel screws for each , 02 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainless steel handles, 125 mm long, (ISI marked) , 01 no. of helical door spring of 300 mm length is inclusive in this item and nothing shall be paid extra on this item.3 The rate of taking down of existing shutter complete all specified and directed by Engineer -in-charge is included in this item and nothing shall be paid extra on this account.4 The rate of Mosquito mesh and XTN aluminium mesh is included in this item and nothing shall be paid extra on this account.

Supply & fixing floor door stopper 150mm size of aluminium alloy body and tounge, anodised, with hard drawn steel spring complete all as specified and as directed by Engineer-in- charge.

Material and labour for Providing and fixing aluminium work with Polyester powder coated aluminium ( minimum thickness of polyester powder coating 50 micron for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conformikng to IS:733 and IS :1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions i.e at top , bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth , rust free, straight, mitred and jointed mechanically wherever required including aluminium cleat angle, aluminium snap beading for glazing/ paneling , C.P. brass/ stainless steel screws, all complete all as specified and directed by Engineer-in-charge . Note :- (i) Weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading shall be physically ascertained through a board of officers convened by GE and payment shall be made only after ascertaining the actual weight of aluminium at site. (ii) The rate of material and labour for providing the EPDM rubber, neoprene gasket , C.P. brass / stainless steel screws are included in this item and nothing shall be paid extra on this account. (iii) During considering the weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading , the weight of EPDM rubber, neoprene gasket , C.P. brass/ stainless steel screws shall not be considered for measurments and payments. Only the weight of the aluminium sections , aluminium cleat angles, aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading shall be considered and measurment and payment shall be made accourdingly. (iv) During the weight of aluminium sections , aluminium cleat angles , aluminium butt hinges, aluminium handles , aluminium tower bolts , aluminium peg stays & aluminium snap beading ,the weight of polyester powder coating 50 micron shall not be considered for weight but the rate of material and labour for providing polyester powder coating 50 micron is included in this item and nothing shall be paid extra on this account. (v) Glazing /Paneling and wire mesh shall be measured and paid seperately. (v)The board shall be duly countersigned by GE shall enclosed with Final Bill .

Supply & fixing in repair for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed by Engineer-in-charge.

Supply & fixing 4.0 mm thick, sheet glass ordinary quality not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in- charge.

Supply & fixing 4.00 mm thick, figured glass, pin head type not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in- charge.

Material and Labour for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chromate primer complete all as specified and as directed by Engineer-in-charge.

Material and Labour for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width & girth by applying one coat of synthetic enamel paint of approved tint complete all as specified and directed by Engineer-in-charge.

Material and Labour for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width & girth by applying one coat of synthetic enamel paint of approved tint complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge

Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in- Charge.

Material and labour for Waterproofing treatment to sunken floor using acrylic based multipurpose polymer. The treatment shall be carried out as per manufactures specification. The treatment shall be include of the following elements also: 1. Surface preparation of substrate by removing all traces of contaminates, loose and friable particles, cement laitance oils and grease, water repellent coatings etc 2. Injection grouting using cementitious grout if required. The payment for injection grouting shall be made separately etc. 3. Repair to the substrate, filling of blow holes/voids and surface leveling using appropriate products specified by the manufacture. 4. All intersections of horizontal and vertical surface should be profiled with a mortar fillet of minimum 25mm x 25mm. 5. The moisture content of the substrate shall be checked before application of first coat at water proof coating at the rate of 200 g/m2 followed brush topping at 450g/m2 per mm. The second coat shall be reinforced with glass fabric between the first and second coat. 6. The treatment shall be protected by application of polymer modified cement mortar of thickness 10mm applied at the rate of 50g per mm. 7. Tech specification : Tensile adhesion strength 0.5N/Sqmm (as bonding slurry).

Material and Labour for 30mm thick cement concrete (1:2:4) type B0 using12.5mm graded stone aggregates as in floor, Sunken floor etc Finished rough to receive tiles including mix WPC as per manufacturer's instruction complete complete all as specified and as directed by Engineer-in-charge. Note : WPC shall be measured and paid separately.

Material and labour for Aerated Autoclaved Concrete (AAC) blocks work according to Indian Standard specification IS:2185(Part-3)-1984 and latest revision built in Cement and sand mortar 1:6 with Aerated Autoclaved Concrete (AAC) blocks straight or curver on plan exceeding 6mtr Mean radius as in sunken floor complete all as specified and and as directed by Engineer-in-charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for anti slip coloured ceramic tiles 7 to 8mm thick (square/rectangular) of Size 400mmx400mm Sqm in floors and Skirting etc. including 10 mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile including necessary cutting as per site requirement complete all as specified and as directed by Engineer-in-charge.

Material and Labour for glazed ceramic coloured tiles 7.5 mm to 8.5mm thick 450mm x 300mm size in verticle surface including 10mm thick backing coat using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile including necessary cutting as per site requirement etc complete all as specified and as directed by Engineer-in-charge.

Material and Labour for abrasion resistant ceramic tiles, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, 9-10mm thick (square), polished, shade and colour as approved by GE, in floors with and including 10mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile including necessary cutting as per site requirement having scratch hardness of surface min 6 on Mohs Scale and abrasion resistance of class V completed all as specified and directed by Engineer-in-charge.

Material and Labour for abrasion resistant ceramic tiles, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, 9-10mm thick (square), polished, shade and colour as approved by GE, in vertical surfaces as in skirting/ Dado with and including 10mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile including necessary cutting as per site requirement having scratch hardness of surface min 6 on Mohs Scale and abrasion resistance of class V completed all as specified and directed by Engineer-in-charge.

Material & Labour for Pre-polished kota stone 18-20mm thick as in flooring, cills and stair case with and including laid over 15 mm thick cement screed base in CM 1:4 laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rounding of edges complete complete all as specified and as directed by Engineer-in-charge. Note : Full piece of kota stone to be used in window cills, tread and riser.

Material & Labour for Pre-polished kota stone 18-20mm thick in riser of steps, skirting, dado and pillar with and including laid over 10 mm thick cement plaster in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete complete all as specified and as directed by Engineer-in-charge.

Supply & fixing in repair 600 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge.

Supply and fixing in repairs Stop valve / angle valve , cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule for 15 mm bore of pipe complete all as specified and as directed by Engineer-in- charge.

Supply & fixing in repairs chromium plated shower rose 125mm size, with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge.

Supply & fixing in repairs,stop cock with butterfly handle ,screwed both ends for iron pipe of dia 20 mm complete all as specified and directed,all as specified & directed. ISI Marked

Supply & fixing in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and as directed by Engineer-in-charge.

Supply & fixing in replacement Chromium Plated, soap tray size not less than 160mm, including fixing to wall with CP screws and PVC plug complete all as specified and directed by Engr-in-Charge

Supply and fixing in replacement 15mm bore Bib tap long body cast copper alloy, chromium plated , with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge.

Supply and fixing in repairs 15mm bore swan neck Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr In Charge

Supply and Fixing in replacement 19mm internal dia Stainless steel drapery rod with bracket incl wall and other side fancy knobs at both ends as approved by GE including taking down old existing rod/pelmet with accessories complete all as specified and directed by Engineer-in-charge.

Supply and Fixing 20 mm bore CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, including taking down unservicable existing GI tubing of 20mm bore and fittings complete complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing 25 mm bore CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, including taking down unservicable existing GI tubing of 25mm bore and fittings complete complete all as specified and as directed by Engineer-in-charge.

Supply and Fixing 32 mm bore CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, including taking down unservicable existing GI tubing of 32mm bore and fittings complete complete all as specified and as directed by Engineer-in-charge.

Supply & fixing in repairs wash hand basin of size 550mm x 400 mm vitrous China white flat back including brackets, waste coupling & PVC Waste Pipe of 32mm dia etc complete all as specified and as directed by Engineer-in-charge .

Material and Labour in repairs vitreous china urinal of size 410mm x 380mm x 950mm, half stall type white, with grating and union for discharge pipe including CP urinal spreader and CP connection and waste pipe complete all as specified and Engineer-in-Charge. Note: Flushing cistern and flush pipe shall be measured and paid seperately under appropriate item of Schedule 'A' BoQ.

Supply & fixing 110 mm bore of pipe PVC (SWR) type B ring fit pipes single socket in any length with Stack clamps as shown in BTD Drg No. 916 sheet 1/4 to 4/4 and BTD-917 sheet sheet 1/1 of stays to wall at a distance of 100-120mm away from walls complete all as specified and as directed by Engineer-in- charge including Taking down old AC eaves gutters and rain water pipes ( of any size and pattern) including all fittings, compete all as specified and as directed by Engineer - in-charge.

Supply & fixing 110 mm bore, PVC (SWR) fittings Type -B such as bends, tee, 'Y' etc ; fixed to PVC pipes, complete all as specified and as directed by Engineer - in-charge.

Supply & fixing 75mm bore of pipe PVC (SWR) type B ring fit pipes single socket in any length with Stack clamps as shown in BTD Drg No. 916 sheet 1/4 to 4/4 of stays to wall at a distance of 100-120mm away from walls ( of any size and pattern) complete all as specified and as directed by Engineer-in- charge including Taking down old AC eaves gutters and rain water pipes ( of any size and pattern) including all fittings, compete all as specified and as directed by Engineer - in-charge.

Supply & fixing 75 mm bore, PVC (SWR) fittings Type -B such as bends, tee, 'Y' etc ; fixed to PVC pipes, complete all as specified and as directed by Engineer - in-charge.

Supply & fixing 110 mm bore, PVC (SWR) fittings Type -B 'P' Trap , with grating including jointing to waste pipe with solvent cement complete all as specified and as directed by Engineer - in-charge.

Supply & fixing 75 mm bore, PVC (SWR) fittings Type -B floor Trap , with grating including jointing to waste pipe with solvent cement complete all as specified and as directed by Engineer - in-charge.

Supply & fixing 110 mm dia PVC type B (SWR) branch fittings Type -B piece, single (single Y) equal or unequalbranch piece single ( equal or unequal), ordinary or inverted or with parallel branches complete all as specified and as directed by Engineer-in-charge.

Supply & fixing in repair Gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge.

Supply & Fixing in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm x 440 mm x 260 mm white with integral foot rests including connection to trap and to flushing pipe including lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and as directed by Engineer-in- charge.

Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern, EWC) P Trap white clour , including connection to drain etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge.

Supply and fixing in replacement 10 litres capacity PVC valveless syphonic action type low level flushing cistern white with inlet, ball valve, float, handle including brackets and 32mm dia PVC flush pipe complete all as specified and directed by Engineer-in-Charge.

Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed, complete all as specified and directed by Engineer-in- charge.

Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof disposal off rubbish upto a distance not exceedomg 500.00mtr where directed ) complete all as specified and directed by Engineer-in- charge.

Material and Labour for Water proofing tratment to existing roof / terrace (material of water proof treatment as approved by GE) Single component, acrylic based, flexible, micro fibre reinforced waterproofing and heat reflective coating system. the treatment shall be carried out as per the manufacturers instructions and shall include the followings: (a) Preparation of substrate and cleaning it off all loose and triable by mechanical means (b) Open the cracks lines to form , V grooves with cutter/hammer/chisel up to 5-10mm and filling with crack filler and PU sealant. (c) application of primer coat @ 0.2 to 0.3 kg/ sqm followed by the first coat @ 0.75kg/ Sqm. (d) The second coat shall be applied @ 0.75 kg / Sqm and reinforced with fabric re-inforcement between the first and second coat. (e) The top coat of primer shall be applied after the second coat dries off @ 0.05-0.08 Kg per Sqm. (f) The material shall adhere to following specification. TECHNICAL SPECIFICATION OF MATERIAL Tensile Strength 1.5 MPa ASTM D412 Elongation at Break > 200% ASTM D412 Adhesion in Peel > 1.5 MPa (on concrete substrate) EN 1542 Crack Bridging Ability Passes upto 3.2mm Width ASTM C1305 Permeability to Water Vapour Passes IS 2645 Water Vapour Transimission ~ 23 g/m²/24hr ASTM E96 Water Absorption < 10% ( by Mass) ASTM D570 Microbiological Resistance No Algae & Fungal Growth ASTM D5590 Solar Reflectance Index 102 ASTM E1980. Note : Complete material shall be approved by GE and procured in bulk and kept in lock and key. Note : The installation company should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the particular manufacturer can only be used with official approval from manufacturer in consultation with GE.

Material and Labour PCC padding in 1:2:4 Type B-1 (using 20mm graded stone aggregates) as in roof slab finishing the surface even and fair and maintain roof slope during the execution of work including Liquid water proofing compound complete all as specified and directed. Liquid Water proofing compound shall be measured and paid separetly as supply only under appropriate item of Schedule 'A' BoQ.

Taking down cement plaster of any description, any thickness from internal and external surfaces of walls/soffits / chajjas/parapet walls /ceiling etc .incl raking out joints, hacking for keys, scrubbibg down with water etc and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge

Material and Labour for Cement plastering 10mm thick in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished fair & even without using extra cement complete all as specified and directed by Engineer-in- Charge.

Material and labour for 15mm thick Rendering in Cement mortar 1:6 on brick work or concrete surfaces of walls and finishing even & smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

Material and labour for 15mm thick Rendering in Cement mortar 1:4 on brick work or concrete surfaces of walls and finishing even & smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.

Demolition of brick work masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified and as directed by Engineer-in- charge.

Material and Labour Brick work with sub class ‘B’ burnt clay old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in- charge.

Material and Labour 75mm thick PCC 1: 3: 6 type C-2 ( using 40mm graded stone aggregate ) in plinth protection, including finishing the surface even and smooth without using extra cement.by Engineer-in-charge.

Demolition of RCC of any description and any position not otherwise specially provided and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance not exceeding 500 metres away from the site complete all as specified and as directed by Engineer-in-Charge..Note:The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.

Material and Labour for RCC ( Nominal Mix) 1:2:4 type B0 12.5 mm graded stone aggregate as in chajjas,papapet,fins,facias,cupboard shelves etc complete all as specified and directed by Engineer-in-charge.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of this schedule.

Material and labour for Formwork to chullah hoods, soffits and sides of chajjas/ parapets /cupboards shelves etc , troughs and similar items including edges on rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-charge.

Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etc complete all as specified and as directed by Engineer-in-charge. (NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.)

Supply & fixing in repairs Rotational Moulded Polyethylene water storage tank ISI Marked of capacity 1000 litres (cylindrical vertical, with closed top), hoisted and fixed in position including making inlet and out let connection complete all as specified and as directed by Engineer-in-charge. (Note :- Ball valve and gate valve shall be measured & paid separately under appropriate items of Schedule 'A' BoQ.)

Supply and Fixing Ball valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of size 20 mm bore (minimum weight 20mm-210 gram) complete all as specified and as directed by Engineer-in- charge.

Material and Labour for preparing new plastered surfaces of ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and directed by Engineer-in- Charge.

Material and Labour for preparing existing treated surfaces of ceilings including cornices and applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.

Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and directed by Engineer-in- Charge.

Material and Labour for applying acrylic wall care putty on internal surfaces and external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed by Engineer-in- Charge. Make of acrylic wall care Putty : AS described in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint.

Material and Labour for prepration of surfaces with and including applying 02 coats of interior emulsion paint (shade as approved by GE ) , @ 10 sq.m/litre/2 coats by using roller to internal wall surfaces over with and including one coat of interior emulsion primer @ 10 sq.m/litre/1 coat by using roller as recommended for under coat by manufacturer of interior emulsion by using the brands of interior emulsion paint and interior emulsion primer as described in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge.

Material and Labour for prepration of surfaces with and including applying 02 coats of exterior emulsion paint (shade as approved by GE) with highlighter of any approved shade, @ 5 sq.m/litre/2 coats by using roller to external walls/ RCC surfaces / soffits of chajjas / roof projections / cantilevers / balcony etc surfaces over with and including one coat of exterior emulsion primer @ 11 sq.m/litre/1 coat by using roller as recommended for under coat by manufacturer of exterior emulsion by using the brands of exterior emulsion paint and exterior emulsion primer as described in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge.

Supply & Fixing 4mm GI wire for laying mosquito nets in OR line, fixing with angle and provide necessary arrangement for lightning complete all as specified and directed by Engineer-in- Charge.

Demolition Stone slabs and tiles of any description or thickness in floors, aprons etc Laid dry or bedded and pointed in any mortar complete all as specified and as directed by Engineer-in-Charge.

Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plateform /cooking plateform , steps, jambs,pillars, window cills, , shelves, urinal partition and like , with and including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75mm thick cement concrete (1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base in floors etc complete all as specified and as directed by Engineer-in-charge.

Material and labour for Rubber moulded pigment chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, set jointed and pointed in neat cement slurry @ 3.00 Kg per Sqm in floor with grey cement and no Piment over with and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-charge.

Material and Labour for Drilling Holes of 12mm dia up to 100 mm deep holes in slab at the interval of 300 mm or as directed by Enginner-in-charge in staggered manner or along the crack line in Reinforced Concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm dia NRV (Non Returnable Valve) nozzle compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fix inside the hole by applying thixotropic epoxy adhesive to ensure complete sealing and allow curing the system for minimum of 8 Hrs before Grouting including nozzle projections, excess putty, if any, over concrete element by grinding, leveling and finishing the external surface, after completion of the work, etc. complete all as specified and as directed by Engineer-in-charge.

Material and Labour for Supply and Grouting, injecting two part, low viscosity, moisture insensitive injection liquid, based on high strength epoxy resin by pressure and using pressure epoxy injector with accessories till nozzle refused to accept the grout including mixing of grout for column, beam and roof slab having following properties:- (i) Mixed Density 1.1 kg/l (at +27°C); Viscosity ~ 250 mPas at +30°C and should comply according to ASTM C 881, Type II and IV, Grade-1, Class E+F (ii) Compressive strength >= 70 N/sqmm (7 days) according to ASTM D 695; Tensile Strength >= 30 N/sqmm (after 7 days at +30°C cure) (According to ASTM D 638); (iii) Bond Strength ~ 10.8 N/sqmm (failure in concrete) after 14 days at +30°C cure; Flexural strength ~ 50 N/sqmm according to ISO 178. (iv ) Seal the nozzle with thixotropic epoxy adhesive after the refusal of grout material from the nozzle. Note:- leakage through other nozzle or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost complete all as specified and as directed by Engineer-in-charge. Note :- Mode of measurement: per kg of material consumed.

Taking down carefully copper /aluminium point wiring conceald/ battern (light, fan, socket or power point ) complete including fitting such as hylem , sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc. complete all as specified and directed by Engineer-in-charge. Note:1.The weight of aluminium scrap and copper scrap for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface shall be measured and paid seperately under serial item no 87.00,88.00,89.00 & 90.00 of BoQ.

Material and labour for concealed Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits), in PVC conduit complete with 2.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through with and including PVC rigid conduit 20mm dia ( heavy duty ) ISI marked with valid CML No.(IS-9537-1983 for conduits and IS:3419:1976 for conduit accessories) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken box of suitable size (min 60mm deep, suitable length and 1.2mm thick ) and flush fixed with cement mortar 1:4 , 3mm thick bakelite plastic laminated sheet for mounting with frame and top cover for switches and socket ,fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 2.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc with and including cutting chases (as required) and making good surfaces to match with adjoining surface complete all as specified and as directed by Engineer-in- charge .Note for serial item no.87.00,88.00,89.00 & 90.00 : (i) switches , two way switches, sockets 5 /6 Amp , sockets 15 /16 Amp & fan regulator shall be measured and paid seperately under respective items of Schedule'A' BoQ.(ii) The rate of cutting chases (as required) and making good surfaces to match with adjoining surface is included in this item and nothing shall be paid extra on this account. (iii) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clips as directed by Engineer-in- Charge.The rate of this element is included in this item and nothing shall be paid extra on this account.

All as per item No 87.00 here- in -before but for one Socket outlet multipurpose 2 in 1, 5 Pin, 5/6 Amp, flush type on same board complete all as specified and as directed by Engineer-in- charge.

All as per item No 87.00 here- in -before but for one Socket outlet multipurpose 2 in 1, 5 Pin, 5/6 Amp, flush type and for one Socket outlet multipurpose 2 in 1, 6 Pin, 15/16 Amp, flush type on independent board complete all as specified and as directed by Engineer-in- charge.

All as per item No 87.00 here-in-before but for One light point controlled by two 2 way switches complete all as specified and as directed by Engineer-in- charge.

Supply and Fixing switch piano flush type 5 Amp, ISI marked 230V AC, single pole, one way complete all as specified and as directed by Engineer-in- charge

Supply & fixing switch piano, flush type single pole two way 5 /6 Amp, 240 volts all as specified .and as directed by Engineer-in- charge

Supply & fixing switch piano, flush type single pole one way 15/16 Amp, 240 volts complete all as specifiedand as directed by Engineer-in- charge .

Supply & fixing Socket outlet multipurpose 2 in 1, 5 Pin, 5/6 Amp, flush type complete all as directed and as directed by Engineer-in- charge

Supply & fixing Socket outlet multipurpose 2 in 1, 5 Pin, 15/16 Amp, flush type complete all as directed and as directed by Engineer-in- charge

Supply & fixing ceiling rose surface type PVC polycarbonate isolated body two to three terminal , tp line series 20x50mm, 6 amps three terminal complete all as specified and as directed by Engineer-in- charge.

Supply & fixing Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as directed and as directed by Engineer-in- charge

Supply & fixing Batten lamp holder on PVC Square blocks with Polycarbonate cased Body (B 22 base) complete all as specified and as directed directed by Engineer-in- charge.

Supply and fixing in replacement wall mounted Batten fitting square profile 20 watt white flux appx 4.00 feet long, pre wired complete fitting with all other accissories fitting arrangemnts with following specifications, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete all as specified and directed by Engineer-in-Charge :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts. (c) Temp operating range : Minus 5°C to Plus 45°C (d) Power factor : Minimum 0.95 (e) THD : Current THD Max10% and voltage THD max 5% (f) IP rating : IP-20. (g) LED Driver of the same make as of the luminaire. (h) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (j) Surge protection minimum 2.5 kV. (k) CCT : Minimum 6000K (l) CRI : Minimum 80 (m) Rated life time : 50000 burning hrs @L70 (Average 10 to 12 hrs daily)

Supply and Fixing in replacement LED mirror light fitting 7 / 9 watt , 6000K lineer and compact with decorative grey end caps , polycarbonate body and ribbrd opal diffuser complete fitting with Lamp & all other accessories fitting arrangment complete all as per manufacturer's instructionons and connection with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as specified and as directed by Engineer-in- charge.

Supply and fixing LED building security light fitting 25 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete power factor> 0.95,100 lumen/watt, CCT min 5700K complete all as per manufacturer's instructions and connection with flexible twin core copper cable of size 23/.00076 from ceiling rose to fitting complete all as specified and as directed by Engineer-in- charge.

Material and labour in replacement Sub main wiring complete with two single core 6 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with and including single core 6 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH for earth wire in existing PVC concealed conduit (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and directed by Engineer-in-charge. Notes:- (a) Three single core 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade shall be measured as one length.

Material and Labour in replacement Sub main wiring with two single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including cuttting, chasing and grouting including non metallic rigid PVC conduit medium quality of size 20 mm dia conforming to 3537 Part-I ISI marked including all fitting such as Tee, Elbow, bend etc drawn in and including one single core of size 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade as in contineous earth conductor cable connected to earth dolly complete all as specified and as directed by Engineer-in- charge. (Colour code phase-Red, Neutral-black and Earth as Green) complete all as specified and as directed by Engineer-in- charge. .Notes:-(a) Cost of PVC conduit , conduit accessories and earth wire included in sub main wiring. (b) Three single core 6 Sqmm FRLSH PVC insulated unsheathed with multistranded copper conductor cable 1100 volts grade including non metallic rigid PVC conduit of size 20 mm dia shall be measured as one length.

Supply and fixing (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) TPN,4 Way 433V, suitable for mounting MCB/Isolator etc, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-54 protection class, and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. Note :- MCB/Isolator etc shall be measured and paid separately under appropriate item of BOQ.

Supply and fixing (concealed flush to wall) factory made DB (made out of CRCA sheet not less than 1.2mm thick, fitted with DIN channel neutral link and 200 Amp rated bus bar) SPN, 8 Way 240V, suitable for mounting MCB/Isolator etc, conforming to IS-13032, DB shall be semi glosy finished with epoxy polyster based powder paint sprayed and backed at high temperature between powder paint process to ensure smooth finish and protection against corrosion atmosphere. The DB shall be double door type with hinged door with locking arrangement, the DBs shall be same make as MCBs, DB shall be provided with level marking indicating the incoming and outgoing circuits on always as specified. The DBs shall be of IP-54 protection class, and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. Note :- MCB/Isolator etc shall be measured and paid separately under appropriate item of BOQ.

Supply and fixing MCB TPN 4 Pole of rating 100 Amps 16 KA thermal magnetic based complete all as specified and directed

Supply and Fixing MCB SPN 40 Amps, 10 KA, ‘C’ Curve, 230 V AC,50 Hz complete all as specified and as directed by Engineer-in- charge.

Supply and Fixing MCB SP 6 to 40 Amps 240, 10 KA ‘C’curve complete all as specified and as directed by Engineer-in- charge.

Supply & Fixing in replacement Exhaust fan (Heavy duty) steel body, AC, Single phase 230 volts,50HZ,900 RPM ,300 mm sweep BEE, 5 star rated with blades and frame including new mosquito stainless steel wire mesh of guage 0.36mm with suitable wooden frame protection against birds etc. mounted in suitable opening arrangmement in wall and electric connection with and including three core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm drawn in flexible PVC Conduit and hanging on wall with 04 Nos. steel fastners 10mm dia 100mm long with and including serial number of fan as issued by Engineer-in-charge and GE office name with red colour permaent marker complete all as specified and directed by Engineer-in- charge.Note: Old unservicable Exhaust Fan shall be deposited in the store yard of AGE EM of GE (N) Bathinda.

Taking down ceilling fan and deposit in the safe custody / store yard of AGE E/M of GE (N) Bathinda complete all as specified and directed by Engineer-in- Charge,

Hanging Only Ceiling fan with and including connection with three core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete all as specified and directed by Engineer-in- Charge,

Material and Labour in repalcement earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground to depth of pit not less than 2.25 m below normal ground level with top edge of the plate not less than 1.5 m below normal ground level surrounded from all sides by 15 cm thick packed layer of charcoal / coal dust and common salt filling in alternate layers and connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of GI or steel including GI protection pipe 15mm dia light grade upto the extent of 7.5 metre and connecting to earthing test point, main switch board including GI pipe 20 mm dia medium grade for watering, MS funnel and bringing out the watering pipe upto 30 cm above the normal ground level plugged at top including all fitting including PCC earth pit with PCC 1:2:4 type B-1 using 20mm graded stone aggregate and RCC pit cover including necessary earthwork and excavation in any type of soil complete all as specified as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- (i) Earth continuity of GI wire 4 mm including protection pipe up to 7.5 mtrs from earth electrode will be included in unit rate, complete all as specified and directed. (ii) The rate of earth work in soft/loose soil i.e. excavation, returing filling and removal, form work is included in this item and nothing shall be paid extra on this account. (iii) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner. (iv) The earth testing arrangement should be done by the contractor as per direction of Engineer-in-charge.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ.

RINKU BROTHERS (BID ID -3295554)

M/s PANKAJ KUMAR (BID ID -3294657)

R K GOYAL & COMPANY (BID ID -3300384)

M/s Balvinder Singh Engineer and Contractors (BID ID -3295516)

M/S VERMA BUILDERS & DEVELOPERS (BID ID -3295473)

M/s Verma Construction Company (BID ID -3295577)