Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.9 LAccepted-AOC N A | NA | NA | 121004 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹37.4 L+₹42,493.50 (1.15%)Rejected-Finance G 124 FLAT NO 4 DILSHAD COLONY DELHI 110095 | SHAHDARA | DELHI | 110095 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹39.3 L+₹2.3 L (6.18%)Rejected-Finance 1 206 SHOP NO 71 MANDIR MARKET SADAR BAZAR DELHI CANTT 110010 | DELHI CANTT | NEW DELHI | DELHI | 110010 | L3 | Rejected-Finance Being other than lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
16 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
EXTERNAL PERIODICAL SERVICES INCLUDING REPAIR TO BROKEN CHAJJAS, PLASTER WORK AND OTHER B/R WORKS ETC TO MD AND OTM ACCN AT MALL ROAD, MANDIR MARG, TIGRIS ROAD, POLO ROAD, CHURCH ROAD, MANEKSHAW MARG, URBAN VILLAGE, CASSEL ROAD, PARADE ROAD, HQ DELHI
2023_MES_619283_1
GE/DE-75/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹98,000
Yes
23 Oct 2023
18 Sept 2023
18 Oct 2023
18 Sept 2023
16 Oct 2023
2 Oct 2023
Amount
M & L 10-12 mm thick polymer modified readymix cement based plaster Make : Ultratech (Brand name Readiplast) complying to IS-1661-1972, IS-2250-1965, IS-2402-1963) or equivalent make as approved make list, applied in ratio 1:4 as per manufacturer's instructions, on fair faces of brick masonry or concrete surfaces of wall, columan, facia, parapet, bottom of slab/ chajja and ceiling finished even and fair including taking down cement or cement lime plaster , any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in-Charge. complete all as specified and as directed.
M&L for dubbing out average 10 mm thick on irregular face of walls/ Ceiling in cement mortor 1:4 complete all as specified and as directed.
M & L for repair to overhang/ ceiling/ edges porting of chajja, facia, dropwall, parapet , roof projection etc for continuous work by providing PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) including chicken wire mess fixing as per requirement and finished with CM (1:3) plaster work after taking down of damaged portion of RCC work by maintaining same level including all necessary formwork and finished the surface to match with the existing surface by providing same finish complete all as specified and directed. Note:- Rate quoted up to G+8 floor bldg including scaffolding
M&L for preparation of New plaster external surface of wall ,pillers, cornices, chajja, facia, dropwall, parapet, roof projection and applying two coats of weather proofing coats of 100% Premium acrylic emulsion exterior paint with Graco 490 spray machine , having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including applying 1mm thick external wall care putty over disturbed surface during preparation or any reason with sanding for smooth surface, Allow 6-8hrs to dry the surface for painting of subsequent quotes etc, all work including up to G+8 storey bldg/tower complete all as specified and all as directed by Engr- in-charge.
M&L for preparation of old decoreated external surface of wall , pillers, cornices, chajja, facia, dropwall, parapet, roof projection of existing treatment by scrapping with TruCare Wall Sander : L-01/H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7”/9” to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying two coats of weather proofing coats of 100% Premium acrylic emulsion exterior paint with Graco 490 spray machine , having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over priming coat premium quality , including applying 1 mm thick external wall care putty over prepaired surface with sanding for smooth surface, Allow 6-8hrs to dry the surface for painting of subsequent quotes etc, all work including up to G+8 storey bldg/tower complete all as specified and all as directed by Engr- in-charge.
M & L for preparation of old decorated external surafce of brick/ concrete / plastered/un-plastered surfaces of wall , pillers, cornices, chajja, facia, dropwall, parapet, roof projection etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including cracks/holes in surface filling with white putty and applying one coat of weather proofing coats of 100% Premium acrylic emulsion exterior paint with Graco 490 spray machine , having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm over etc all work including up to G+8 storey bldg/tower complete all as specified and all as directed by Engr- in-charge.
Note for srl Item No. 4 & 5 here-in-before (i) The work mentioned in above items shall be carried out including in multi storied buildings (G+8) which may require scaffolding or Jhulla arrangements or any other T&P items are included in the quoted rates by the contractor.Without proper safety precuasions, the contractor shall not be allowed to execution the work. (ii) Cover the windows/ventilators/doors and other surafce before the spray machine painting and after painting the remove the covering material and tapes etc and clean the windows and glass panes. (iii) Colour paterns for wall , facia , chajja etc as approved by GE
M & L for preparation of new surface decorated brick/concrete/ plastered or unplastered surfaces of walls, pillars, cornices by brooming down etc and applying two coat of cement base paint complete all as specified and directed
M & L for preparation of old surface decorated brick/concrete/ plastered or unplastered surfaces of walls, pillars, cornices by brooming down etc and applying two coat of cement base paint complete all as specified and directed
Cutting shrubs, wild growth/trees n exc 30cm girth and removing complete vegetation growth from walls incl taking out roots from roofs/brick work/walls/ shaft area etc up to G+8 floor bldg / tower and making good the disturbed surface with as required PCC 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate including treating affected area with acid wash to check further growth of vegetation and disposing off the rubbish from site (MoD Land) from the above mentioned area complete all as specified and as directed. Note:- Rate quoted up to G+8 floor bldg.
M & L for two coat of floor paint on any type of surface including prepration of new/old surface make ;- Indigo floor paint and or equivalent as approved by GE) complete all as specified and directed.
M & L for preparation of old Steel and Iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as Specified and directed.
M & L for preparation of old wood surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as Specified and directed.
M&L Providing and applying high quality Heritage texture of sand stone acrylic modified resin based texture body coat incorporating natural granite chip with pearl effect with anti alage and UV resistance property to be applied as in intermeadite finishes in desired pattern @ 43.4 kg/10 sqm to form film of 2 mm - 4 mm thickness as per approved pattern and any position /type of wall , piller, columan , facia etc over one coat of premium quatity primer and including scrubbing and washing, the top layer with brushes and water to expose the stone chippings and including taking down of existing texture treatment and scrubbing down with water, scrapping and properly cleaning the surfaces to remove loose particles from the plaster surfaces complete all as specified and as directed by Engr- in-charge
M&L Providing and applying Ruff 'N' Tuff - Scratch trowel applied synthetic grooved finish texture. standard (2 mm to 2.5 mm) medium rough surfaces, coverage @ 4.00 Kg / Sqm as approved pattern and any position /type of wall , piller, columan , facia etc over one coat of weathercoat exterior primer, including applying 02 coats of weathercoat exterior emulsion with recommended dilution ratio as finishing coat and including taking down of existing texture/ any other treatment and prepration the surface with scrubbing down with water, scrapping and properly cleaning the surfaces to remove loose particles from the plaster surfaces, repairs of all surface imperections- cracks, leakages, undulation and rust etc complete all as specified and as directed by Engr- in-charge.
M & L for preparation of old external surfaces of walls, pillers, cornices etc by scrapping down smoke soot, moulds, moss, efflorescent salts , trading oil and greasy spots and including cracks/holes in surface filling with white putty and scrapped surface area to obtain smooth finishing with water proof wall care putty as required and applying one coats of weather proof exterior acrylic emulsion paint premium quality complete all as specified and directed.
M & L for Washed stone grit plaster on exterior walls in two layers (colour and design as approved by GE), under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of existing cement or cmenet lime plaster of any thickness and any description on brick or stone walls including raking out joints, hacking for key and scrubbing down woith water, complete all as specified and as directed.
M & L for wall cladding tiles of size area exc. 0.12 sqm but n.exc 0.18 Sqm of 8-10 mm thick (patern and design as approved by GE) on vertical surfaces of wall such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10 mm thick rendering in CM 1:4 and including dismantling old tiling including cement mortar bedding (but not backing), etc complete all as specified and directed
S & F 3 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed including with hacking out old broken glass from wooden frames and steel frame or stone, concrete or brick surrounds , glazed with putty or fixed with beads. complete all as specified and directed.
M & L for 18/20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including 15 mm thick screed bed in CM 1:4 including rounding to edge of granite as per required and including dismantling of existing granite of any description including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.
M & L for writting letters on figure (Block Roman Italic or Indian) to buinding with synthetic enable paint 65mm high and 60mm wide in words and figure such as (P-5/8, P-6/9, T-1/7,P-14/2 etc) over black synthetic enamal painted ground of 150mm dia complete all as Specified and directed.
M & L for PCC 1:2:4 type B-0 using 12.50 mm graded crushed stone aggregate as in roof kerb, mud stops, platform for OHT, benching, coping etc., and similar type of works, weathering, slightly rounded or chamfered angles including demolition of existing PCC of any type complete all as specified and as directed.
M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 20 mm average thickness in single layer and finishing with trowel with a bond coat SBR polymer @ 10% of cement weight modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer including taking down existing roof treatment of any type and also taking down cement plaster on brick/concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed. Make: Asian Paints or equivalent in Sikka, Fosroc and STP Ltd. Note : The application shall be executed on any type of surface and on horizontal/Vertical areas.
Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @ 2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger/ STP/ STAR SPECIALTIES. Notes: (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) All materials shall be procured directly form manufacturer. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.
S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any position description complete.
S&F steel water tubing galvanised 15mm bore medium grade fixed to walls, roof and on ceiling surfaces , and including taking up or down old steel tubing 15 mm bore and connecetions in any postion etc complete all as specified and directed.
S&F steel water tubing galvanised 20 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed.
S & F in repair 20 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed
S & F in repair 15 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed
M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 complete after dismantling of existing all as specified and directed.
M & L Vitrified ceramic tiles (colour & design as approved by GE) 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick avg screed bed in CM 1:6 complete after dismantling of exisiting all as specified and directed.
All as same as per srl item No 31 here-in-before but on vertical surface such as in skirting/dado etc over and including 10mm thick rendering CM (1:4) after dismantling of existing complete all as specified and directed.
M & L Vitrified ceramic tiles (colour & design as approved by GE) 10mm thick (square/rectangular) area of each tile exceeding 0.42 Sqm and not exceeding 1.20sqm on vertical floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 10 mm thick avg screed bed in CM 1:4 after dismantling of existing complete all as specified and directed.
M & L for complete removal of existing treatment from internal surfaces of wall/ceilling by mechanical sander of berger paints or equivalent makes viz xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying a coat of primer over already prepared surfaces of walls and applying uniform thickness (avg 2mm thick ) wall care putty on internal surfaces of wall/ceilling including preparaing the surface even and smooth by sander etc and providing two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification and using roller brush , complete all as specified and directed by Engineer-in-Charge
S & F in repairs Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover , flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar cat part No. SLS WHT 6851S300PP or equivalent in Hindware/Parryware or equivalent make as per approved make list).
S & F in repair full pedestal pattern wash hand basin, size of basin 630mm x 510mm and pedestal of 900mm long colour as approved by GE including brakets , chromium plated brass waste coupling etc complete all as specified and as directed.
S & F Stain less steel CP towel rack of size 600mm x 350 mm , fixed with ss screws , fixed in repair , complete all as specified and as directed (Make : Hindware cat part No. F280020CP or equivalent in Jaquar/ Prayag/Cera)
S & F in repair Towel ring fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, complete all as specified and as directed. (Make:Jaquar/ Prayag/Cera)
S&F in repairs of CP towel rail 600mm long fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. (Make:Jaquar/ Prayag/Cera)
S & F in repair Stainless steel Grating dome 125mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.
S&F in repairs health faucet chromium plated brass with 1.00m CP long flexible pipe and brass chromium plate nuts completed all as spd Make - Cera Cat No. F8030103 / Hindware Cat No. F 160068 CP / Jaquar Cat No. ALD- 573 or equivalent as approved by GE
S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm.
S&F in repair Wall mixer 3 in 1 inlet system with provision and including of both shower (hand shower 1-115mm and over head shower 200x200mm complete with suitable long bend pipe connecting leg ,CP flange etc complete all as specified and as directed. directed. Make : Jaquar continental series - Cat Part No- CON-281KN, OHS -CHR 35497 , HHS -CHR -1739 or Equivalent in hindware or Cera. (Note- The quoted rates includes cost of Over head shower and Hand Shower )
S&F in repair fancy type chromium plated long body Bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule 15mm bore icluding CP wall flange complete Make : Jaquar continental series - Cat Part No- CON-107KW or equivalent in Marc/Kohler/Cera.
S&F in repair fancy type angle Stop valves cast copper alloy chromium plated screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipes or for unions, 15mm dia of pipe, complete.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each complete all as specified and directed.
S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S & F Factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site as per specification in SSR Part-I. complete all as specified and directed by Engr-in-Charge..
S & F anodised aluminium window and ventilator shutters on aluminum frame, with Powder Coating (minimum thickness of powder coating 50 micron) fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S&F in repair Swimming Pool FRP Grating width 250mm complete all as specified and as directed
Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.
sunil traders
A R construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .