Supply of CMR Pully, fasteners and miscellaneous item for ATPS Anpara

HT hex bolt & nut M-12X50

HT hex bolt & nut M-12x40 FT

MS Plain Washer M-12

MS Plain Washer M-16

HT HEX Bolt & Nut M-6X30

HT HEX Nut M-10

HT HEX Nut M-12

S.S. washer, ID 15.8 mm, OD 20 mm, Thickness 3 mm

Neoprene rubber 'O' ring size 116x104x6 mm

Neoprene rubber 'O' ring 116x108x6 mm

Neoprene rubber 'O' ring size 95x80x3 mm

Gate valve 2" for LOP

Love joy flexible coupling L-095

RUBBER SPIDER FOR LOVE JOY COUPLING L - 95

Oil seal 62x112x37

SS flexible hose for oil line as per sample

Asbestos copper washer as per sample

Pump body as per sample

Connecting pin as per sample

Gland packing Teflon tape (small)

PRV 1 '' as per sample

Gate valve 1" for LOP as per sample

Stud bolt with nut 16x100

HT hex bolt & nut M-16X40

H.T. Hex Bolt M-20x70

H.T. Hex Bolt M-16x120

Coupling bolt for CMR gearbox as per sample

H.T. Hex Bolt & Nut M-16x50

HT hex bolt & nut M-16X60

Fabricated pyrite hopper gate as per sample

Coupling bolt for CMR gearbox as per sample

Coupling bolt as per sample

SS flexible hose pipe for steam line as per sample

SS Nipple 21x19x3 mm

LRSB rotary chain lock link as per sample

LRSB Advance chain lock link as per sample

Take up pulley, Specification- Take up pulley, shell length-750mm,shell dia-430mm,shaft dia-90mm (both side length-180mm) shaft material:CK45, Hub/pulley/shell/pin# material as per IS 2026

Bend pulley, Specification- Bend pulley shell length-750mm,shell dia-400mm,shaft dia-90mm (both side length-180mm) shaft material:CK45, Hub/pulley/shell/pin mat#erial as per IS 2026

Non drive tail pulley, Specification- Non drive tail pulley(Shell length-750mm,shell dia-450mm,Shaft dia-75mm (both side length-180mm) shaft material:CK45, Hub/pulley/she#ll/pin material as per IS 2026.

Snub pulley, Snub pully#Shell length-750mm#Shell dia-385mm#Shaft dia-65mm (both side length-180mm)#Shaft material -CK45#Hub/pulley/shell/pin material as per IS 2026#

M.S. Round rod 20MM, M.S. Round rod 20MM (6 Mtr length)

M.S. Pipe 150MM, M.S. Pipe 150MM(O.D-155MM,Lenggth-6 Mtr.)

G.I. Fittings of Class C, Socket ½”

G.I. Fittings of Class C, Union ½”

G.I. Fittings of Class C, Elbow 1/2”

G.I. Fittings of Class C, Tee ½”x1/2”x1/2”

G.I. Fittings ofClass C, Nipple ½”x20mm

G.I. Fittings of Class C, Bend ½”

G.I. Fittings ofClass C, Nipple ½”x50mm

HT hex bolt and nut M-16x100 HT grade should not be below 8.8

H.T. Hex. Bolt M-20x70 HT grade should not be below 8.8

HT bolt with nuts & washer (F/T) M 6x40 HT grade should not be below 8.8

HT hex bolt & nut M-16X40 HT grade should not be below 8.8

HT hex bolt & nut M-12X50 HT grade should not be below 8.8

MS bolt & Nut M-16x125mm

HT Hex Bolt & Nut M-20x170 HT grade should not be below 8.8

HT Hex Bolt & Nut M-20x250 HT grade should not be below 8.8

H.T.Hex Bolt & Nut M-20x120 HT grade should not be below 8.8

MS M16 plane washer ID 16MM OD 50MM THICKNESS 3 MM

M S Pipe 150 mm dia THICKNESS 4.8 MM

Cotton Tape

GLASS TAPE

Mica Tape

Teflon Tape

Isoph Varnish Polister Fabric Tape

Varnished Terylene Tape, Fiberglass Tape##Thickness: 0.13mm, Width: 25mm##Insulation Level: 25KV##Suitable for insulation of termination between stator lead and terminal box bushing of HT motors.##(1 Roll = 50 Meter Length)##

Conveyor Belt fastener as per sample

Synthetic Rubber Bonded Cark sheet Size 900X900X6 mm

Synthetic Rubber bonded Cork sheet, 900x900x10mm

Main pulley As per Drawing attached as per sample

Plumber block S518

ADOPTER SLEEVE H318 , Specification- Tapered adapter sleeve H-318 (with steel stabilizing ring, LER seal ring, Lock washer and lock nut) suitable for 22218K Bearing##

M/S ASHA ENTERPRISES

SHREE SHYAM ASSOCIATES

M/S ANURAG ENGINNERING WORKS

M K ASSOCIATE

SHREE SHYAM ASSOCIATES

M/S ASHA ENTERPRISES