REPAIR TO BOUNDARY WALL, HARD STANDING ,JOINERY, FALSE CEILING ETC.AND MISC B/R WORKS AT DAD COLONY SEC 35 B AND PCDA BLDG SEC 9 UNDER GE CHANDIGARH.

Amount

Demolition of stone slabs and tiles of any description or thickness in floors,aprons etc laid ,bedded and pointed in any mortar including removing of debries outside MOD land complete all as specified.

M&L for green Marble work 16-18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade.

S&F 18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar works complete all as specified

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing of debris out side MoD land complete all as specified and directed

M&L 75mm thick Plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate) as in sub base under floor/path all as specified and directed.

M&L 40 mm thick Plain cement concrete 1:2:4 Type B1 (20mm graded crushed stone aggregate) as in flooring, surfaces finished even and fair complete all as specified and directed.

S&F 38 mm Plastic dividing strips, 1.5mm thick and inserted in position to confirm the design complete all as specified.

M&L for mirror polished machine cut kota stone slab 18 to 20 mm thick in flooring over and including 15 mm thick cement screed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for mirror polished machine cut kota stone slab 18 to 20 mm thick in riser of steps, shelves etc. round edges over and including 15 mm thick screed bed or bedding layer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for repairing the surfaces of RCC beams, chajjas, facias, slabs, column and like by providing PCC (1:2:4) type B0 including necessary form work and provn of rendering 15mm thick (avg. thickness) in cement mortar 1:3, after applying a coat of cement slurry @ 3kg/sqm of surface, finished even and fair, including taking down swoolen/demaged plaster of concrete complete all as specified. Note: work will be carried out up to height of 12 mtr from ground level. Rates for necessary scaffolding/arrangements and other any T&P if any required at site including suitable safety measures to carry out the work shall be deemed to be included in the unit rate of this item.

M&L for Chequered cement concrete tiles 25cm x 25cm x 25mm thick,(any colour/shade) set, jointed and pointed in neat cement slurry in floors with Grey cement and pigment over 15mm thick screed bed of CM1:6

M&L 80 mm thickness M-40 Grade Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006, jointed and pointed with grey cement and pigment including 75mm thick sand cushioning (to be paid seperately) and PCC lock at edges, complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed

Demolition of Brick work built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles

Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 cement complete all as specified

All as per item No 16 here-in-before but except bricks

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete as specified and directed

M&L Rendering 15mm thick in cement mortar 1:4 on brick work or concrete surface, finished the surface even and smooth without using extra cement , complete, all as specified

M&L for preparation of newly plastered surface of walls and applying two coats of weather guard exterior acrylic emulsion paint (1st quality) over a coat of alkali resistant primer complete all as specified NOTE : Work will be carried out up to a height of 30 mtr from ground level. Rates for Necessary scaffoldings/arrangements and other any T&P if any required at site including suitable safety measures to carry out the work shall be deemed to be included in the unit rate of this item .

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint, complete all as specified

M&L for Providing, cement concrete PCC 1:2:4 type B-1 (using 20mm graded aggregate) in roof kerbs or mud stops, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L taking out roots of trees penetrated through valves/concrete surfaces etc upto a depth of 600mm by chieseling , demolition of brick work , concrete work and pouring concentrated acids/Dr fixit chemicals upto the depth of roots and making good the disturbed portion.

M&L taking out roots of trees penetrated through valves/concrete surfaces etc above 600mm depth by chieseling , demolition of brick work , concrete work and pouring concentrated acids/Dr fixit chemicals upto the depth of roots and making good the disturbed portion.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition) including removing of debris out side MoD land complete all as specified and directed

M&L Providing precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces B-1, 1:2:4 (using 20mm graded crushed stone aggregate) in CM 1:4 complete all as specified and directed

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S & F 110mm bore PVC (SWR) bends any radius

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), all as specified and directed

Dismantling posts or struts (wood, steel or R.C.C.) any section embedded Concrete, brick work,masonry, etc including taking out embedded portion and making good disturbed ground

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming Fe 410-W(Gde-E-250) quality A

Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings, complete all as specified

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling timber scantlings 40 sq. cm and over in section, in any position any description not otherwise provided for complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified.

S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W (Gde-E-250) quality-A

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

S&F MS Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete with Fe 290 (Gde-E-165)

M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store

S&F 20mm bore medium grade tubes, glvanized with all GI fittings anf fixed complete to walls and ceilings or laid in floors

S&F in repairs 20 mm gate valves of gun metal with iron wheel head screwed both ends for iron pipe and fixed

Taking down chowkats or frames not exc 1.5Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkats or frames exc 1.5Sqm and over eachwith shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down shutters of any description exc 1Sqm and not exc. 2 Sqm each, complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification

S&F Factory made soild PVC profiled panel door shutter 28mm thick withintegral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as , with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site complete, all as specified and directed.

Pressed steel frames 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

35mm thick 2nd class hard wood (Kail) Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete, all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc,(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, cut and mitred beads for securing glass etc size of members of shutters as spd in SSR part I, section 8.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or welded as per Drg No TD-219 of HQ CE CZ Chandigarh complete all as specified and directed.

S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or welded as per Drg No TD-219 of HQ CE CZ Chandigarh complete all as specified and directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar workon- forming to Fe.290.Gde-E-165

S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat/aluminium beading for fixing etc with powder coating (min thickness 50 micron). complete all as specified

S&F Anodised aluminium door shutters of 14 gauge aluminium section including necessary joining cleats/aluminium beading ,glazing clips, rubber neoprene packing, handles 2 Nos in each door, 01 No Tower Bolt, hinges,anodised aluminum snap beading screws etc with powder coating (min thickness 50 micron) complete all as specified.

S&F Anodised aluminium window and ventilator shutters of 14 gauge, fixed type without sash bar, aluminium section including necessary joining cleats/aluminium beading, glazing clips, rubbe rneoprene packing , handles 2 Nos, 02 Nos Tower Bolt, anodised aluminium snap beading, screws etc with powder coating (min thickness 50 micron) complete all as specified. complete all as specified

S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat/aluminium beading for fixing etc complete all as specified

S&F Anodised aluminium door shutters of 14 gauge aluminium section including necessary joining cleats/aluminium beading ,glazing clips, rubber neoprene packing, handles 2 Nos in each door, 01 No Tower Bolt, hinges,anodised aluminum snap beading screws etc complete all as specified.

S&F Anodised aluminium window and ventilator shutters of 14 gauge, fixed type without sash bar, aluminium section including necessary joining cleats/aluminium beading, glazing clips, rubbe rneoprene packing , handles 2 Nos, 02 Nos Tower Bolt, anodised aluminium snap beading, screws etc complete all as specified. complete all as specified

S&F aluminium anodised (Deco) pattern grill 75x75mm size design No 102, 7.30mm thick including suitable F/H section frame fixed with aluminium plate screw to window complete all as specified and direcetd.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S&F 3mm thick sheet glass ordinary quality not exc 0.50Sqm in each pane fixed with oil putty/rubber/aluminium beading/silicon sealent complete all as specified in repairs.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty/rubber/aluminium beading/silicon sealent in squares not exc 0.5 sq.m in each pane

S&F 5.5mm thick Sheet glass (plain/frosted/tinted),ordinary quality and glazing with oil putty/rubber/aluminium beading/silicon sealent in square exc 0.5sq. m in each pane complete all as specified and as directed.

S&F 8-10mm thick toughned glass fixed in any position with studs/bracket/frame work of any size and type complete all as specified directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified

S&F Aluminium (Dicast) body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and complete all as specified and directed.

S&F Aluminium rebated Mortice Lock vertical type size 100mm 04 Lever

S&F in repair Aluminium rebated Mortice Lock vertical type size 100mm 04 Lever

S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S&F 150mm long Aluminium handles, cast type, anodised, all as specified and directed.

S&F 100mm long Aluminium handles, cast type, anodised, all as specified and directed.

S&L in repair Steel chromium plated curtain rod (Fancy Type) of 25 mm dia including curtain rings, Steel bracket both ends of the curtain rod, stops, rollers etc fixed to wall complete all as specified

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F 5-6mm thick Aluminium Composite Panel (ACP) sheet (interior/Exterior) Grade of any colour/shade/design/pattern and in any position including silicon sealent in joints including fixing to wall /frame work with screws/studs etc complete all as specified

S&F Stainless steel letters gade 304 upto 15cm in height (in any language/colour/shade/design) including necessary frame work / fixing arrangement complete all as specified

S&F Stainless steel letter gade 304 exceeding 15cm but not exceeding 30cm in height (in any language /colour/shade/design) including necessary frame work / fixing arrangement acomplete all as specified

Dismantling of wall and ceiling boards/sheets (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, all as specified.

S & F of aluminium snap grid false ceiling of panels of size 605 x 605mm using aluminium anodised wall angle of size 25 x 25 x 1.50mm thick fixed to walls with rawl plug and screws n. exc 1.50m c/c and intermediate panels using main "Tee" and cross "Tee" aluminium anodised section of size 35 x 25 x 1.50mm and 25 x 25 x 1.50mm thick suspended with and including 4mm dia GI wire n. exc 1.2m c / c and 12mm Gypsum Board stuck to 1mm plain PVC Sheet fixed to aluminium frame work with screws complete all as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L Second class hardwood as in scantling, clean sawn fixed in position with nails, unframed work, complete, all as specified and directed

S&F 18-19mm Plywood, grade BWR fixed with screws to timber frame work complete all as specified

S&F 6 mm Teak wood ply,with decorative face veneers grade BWR, fixed with screws/nails to timber frame work including polishing complete as pecified and directed

S&F 1mm Sunmica decorative laminate type 1 with glossy surface finish, any colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions including polishing complete as pecified and directed

S&F stainlless steel soft closing hinges/Dadu kabja of approved make compete all as specified

S&F stainlless steel stand (50mm dia) fixed to timber/ply wood frame work as in cupboards / shelves etc complete all as specified

MANDEEP ENTERPRISES

Puneet Sharma

OJHA ENTERPRISES

KULWANT RAI

ALPHA ENGINEERS AND BUILDERS

M AND H BUILD TECH

M/s Nuway Constructors India Pvt. Ltd.