SPECIAL REPAIRS TO BUILDING NO P-97 AND P-99 OF DEFENCE COLONY MD ACCN OF 5104 ASC BN UNDER GE MISAMARI

Amount

Demolition of cement concrete (unreinforced) of any description in ground floor and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforced cut as required to facilitate demolition) complete all as specified and directed.

Demolition of Brickwork build in cement mortar including all quoins, arches, pillars etc, of any descriptions, complete all as specified and directed.

Dismantling of timber scantling 40 sqcm and over in section in any position unframed work complete all as specified and directed.

Dismantling of timber fillet, rails, posts, rafters, purlins etc under 40 sqcm and over in section in any position unframed work complete all as specified and directed.

Dismantling of boarding ,any description ,fixed in any position with nails etc complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) area not exceeding 1.50 sqm each including iron mongeries complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) area exceeding 1.5 sqm but not exceeding 4.00 sqm each including iron mongeries complete all as specified and directed.

Taking down shutters of any description not exc1 sqm including iron mongries complete all as specified and directed.

Taking down shutters of any description exceeding 1sqm and not exceeding 2 sqm each including iron mongries complete all as specified and directed.

Taking down PVC chowkats or frames with shutterof any description area not exceeding 1.5 sqm each including iron mongeries complete all as specified and directed.

Dismantling of wall and ceiling board or insulation boards/slabs/blanckets/any thickness including cover fillets complete all as specified and directed.

Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling stone slabs/tiles of any description or thickness in floor, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Taking down cement plaster on brick, concrete block wall or stone walls, etc., including raking out joints,hacking for key,scrubbing down with water etc compleate all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections segregating the serviceable pipes and connectionsm stacking proerly at site (S) and keep in safe custody for re-use complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections segregating the serviceable pipes and connectionsm stacking proerly at site (S) and keep in safe custody for re-use complete all as specified and directed.

Material and labour for reinforced cement concrete (nominal mix) 1:1½ :3 type A1 using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like complete all as specified and directed. Note :- Reinforcement & formwork shall be measured and paid for separately.

Material and labour for reinforced cement concrete (nominal mix) 1:1½ :3 type A1 using 20mm graded stone aggregate in chajja and lintels etc complete all as specified and directed. Note :- Reinforcement & formwork shall be measured and paid for separately.

Material and labour for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 completed all as specified and directed .

Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete.

Material and labour for formwork to chajja and similar work flat rough finished surface of concrete complete all as specified and directed

Material and labour for second class wrought hard wood in scantlings in timber framed and fixed work fixed with nails in any position complete all as specified and directed.

Material and labour for 2nd class hard wood plain fillets, square, rectangular or triangular in section exc. 13 sqcm but n.exc 25 sqcm, clean sawn secured with nails or brads complete all as specified and directed

Material and labour for 2nd class hard wood plain fillets, square, rectangular or triangular in section exc. 6 sqcm but n.exc 13 sqcm, clean sawn secured with nails or brads complete all as specified and directed

Material and labour for 2nd class hard wood plain fillets, square, rectangular or triangular in section exc. 3 sqcm but n.exc 6 sqcm, wrought secured with nails or brads complete all as specified and directed

Supply and fix 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. (Species :TitaChampa/Bonsum/Hollok or equivelent).

Supply and fix Flush shutters 25 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides with partical board and fitted to wooden chowkats, complete all as specified and directed.

Supply and fix Flush shutters 40 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides with partical board and fitted to wooden chowkats, complete all as specified and directed.

Supply and fix 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc for secuering glass excecter size of members of shutter as specified in SSR part-I, Sec -8 clause 8.20 (a) complete all as specified and directed.

Supply and fix 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc but divided into squares, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads etc for secuering glass excecter size of members of shutter as specified in SSR part-I, Sec -8 clause 8.20 (a) complete all as specified and directed.

Supply and fixing solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat mouleded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rain, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supling & fixing in the frame at site as per specification & drawing.

Supply and fix steel ventilator with top hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars dovetailed or welded (Comply with IS:1038-1983 as specified in SSR part -I 10.25),complete all as specified and directed.

Supply and fix for Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain let in and fixed independently in wooden frames L or T section support for shelves etc., and similar articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Refixing of shutters in same opening any description not exc 1.00 sqm each complete all as specified and directed.

Refixing of shutters in same opening any description exc 1 sqm and not exc 2.00 sqm each complete all as specified and directed.

Supply and fix 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 Sq.m in each pane including oil putty and bedding complete fitting complete all as specified and directed. Make :- Saint Gobin/Modi float/Triveni float glass/hindustan pilkington or equivalent ISI Marked

Supply and fix Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc complete all as specified and directed.

Material and labour for PCC 1:2:4 type B2 (using 40mm graded crushed stone aggregate) as in bed block including necessary frame work complete all as specified and directed.

Supply and fix mild steel flat iron 25x3 mm ,bands, straps, clamps, hold fasts, wall ties and similar articles conforming to Fe-310-0 complete all as specified and directed.

Supply and fix 2nd class hard wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each

Supply and fixing for 300 mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia fitted with gate using welding complete all as specified and directed. Make :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used.

Supply and fix 50 mm size mild steel butt hinges medium weight cold rolled and fixed complete all as specified and directed. Make :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used.

Supply and fix 75 mm size mild steel butt hinges medium weight cold rolled and fixed complete all as specified and directed. Make :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used.

Supply and fix 100 mm size mild steel butt hinges medium weight cold rolled and fixed complete all as specified and directed. Make :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used.

Supply and fix Mild steel barrel tower blots 150 mm long , stove enamelled black, with bright bolt and fixed complete all as specified and directed. Make :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used.

Supply and fix Mild steel barrel tower blots 200 mm long , stove enamelled black, with bright bolt and fixed complete all as specified and directed. Make :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used.

Supply and fixing 100 mm size Mild steel pressed handles ,oval type,stove enamelled black complete all as specified and directed. Make :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used.

Supply and fixing 150mm size Mild steel pressed handles ,oval type,stove enamelled black complete all as specified and directed. Make :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used.

Supply and fixing for mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and directed

Supply and fix Aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and directed. Make :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used.

Supply and fix Aluminium anodised handle 150mm long of extruded section complete all as specified and directed. Make :- Crown/Nulite/Mepro/Argent/Classic/Elite or equivalent ISI Marked fitting to be used.

Supply and fix TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

Supply and fix TMT bars 6mm dia and over upto and including 10mm dia (confirming to Fe-410-S or Fe-410-0) cut to length, bent to shape as required including cranking and binding with mild steel wire (annealed) not less than 0.9mm dia as in stirrups, spacers and binders complete all as specified and directed.

Dismantling of Asbestos cement (corrugated ted, semi corrugated, etc.)/galvalume/fibre glass/CGI sheets in roof coverings complete all as specified and directed.

Supply and fix for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Supply and fix for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Supply and fixing flase ceiling with everest fibre cement designer tile lvory painted (High pressure steam cured) of 4 mm thickness (as per IS 14862) of size 595x595 mm and one of the desin (Occeanic lake and hill cascade or electra) in true horizontal level, suspended on inter locking metal grid dipped galvanized steel section (galvanized @ 120 gms, both side inclusive ) consisting of main 'T' runner with suitable spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet and cross "T" of size 15x32 mm made of 0.30 mm thick sheet, spaced between main "T" st 600mm c/cto foam a grid of 600x600 mm and well angle of size 15x20 mm made of 0.30 mm thick sheet and lying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures smoke detectors etc, Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purline etc with dash fasters GI adjustable rods of 3 mm dia with gavanised butterfly level clips, spaced at 1200 mm c/c along main T bottom exposed width of 15 m of all T-sections shall be centre black pre-painted with polyster paint and having a load bearing capacity of 12 kg/sqm complete all as specified and directed by Engr-In -Charge.

Material and labour for 4 mm thick Asbestos cement plain building boards in ceiling, fixed to timber framework with screws complete all as specified and directed.

Material and labour for cover fillets, 3 mm thick of standard hard board 40 mm wide fixied with nails or screws complete all as specified and directed

Material and labour for cement concrete 1:2:4 (12.5 mm graded aggregate ) 25 mm thick as in roof padding after brushing with cement slurry @ 3.0 kg cement per sqm complete all as specified and directed

Material and labour for water proofing treatement on existing cleaned RCC roof on 10 mm thick screeding in CM 1:4 finished even and smooth and applying bitumen primer comforming to IS-3384-1986@ 0.3 litre per sqm and applying evenly one coat of blow hot bitumen of grade 85/25 @ 1.20 Kg per sqm and applying APP based polymeric Membrane 3.00 mm thick (minimum) weighing 3.50 Kg per Sqm (reinforced) with Polyster non woven Fabric weighing not less than 160 grams per sqm by torch application with overlaps of minimum 100mm on the transverse direction and 75 mm on longitudinal direction and applying on coat of aluminium paint @ 0.10 Litre/sqm over APP based Polymeric Membrane.

Material and labour for 15 mm thick screed bed in cement mortar 1:6 for laying floor tiles complete all as specified and directed.

Material and labour for 20 mm thick screed bed in cement mortar 1:4 for laying floor tiles complete all as specified and directed.

Material and labour for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles as in skirting, dados etc complete all as specified and directed

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed. Make :- Somany/Kajaria/Orient/Johnson/Nitco/Sunheart/Sunsine Tiles co pvt ltd or equivelent.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed. Make :- Somany/Kajaria/Orient/Johnson/Nitco/Sunheart/Sunsine Tiles co pvt ltd or equivelent.

Material and labour for glazed ceramic coloured tiles of size (300x200mm) 6 x 7mm thick on vertical surfaces such as in skirting, dados set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. Make :- Somany/Kajaria/Orient/Johnson/Nitco/Sunheart/Sunsine Tiles co pvt ltd or equivelent.

Material and labour 18- 20 mm thick granite (of any type) work (table rubbed and polished) in cooking platforms in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in path/plinth protection/hard standing including finished surface finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound, Grade `A' complete all as specified and directed.

Material and labour for 25 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggrigate as in paths finishing the surface even and smooth without using extra cement laid in alternative panels including making impression of expanded metal while the concrete is green complete all as specified and directed.

Material and labour for 25 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggrigate as in sub base finishing the surface even and rough to receive the topping layer (for raising floor level) complete all as specified and directed.

Material and labour for 15 mm thick rendering internal fair faces built in cement mortar (1:6) on concrete or brick wall surfaces of wall finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15 mm thick rendering external fair faces built in cement mortar (1:4) on concrete or brick wall surfaces of wall finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 5 mm thick rendering internal fair faces built in cement mortar (1:3) on concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed.

Supply only integrated water proofing compound. Make :- Waterseal/Pidilite/Cico/Bostic/Fosrock/J K Cement or equivalent ISI Marked

Material and labour applying for two coat of cement based paint over a coat of chalk whiting on new plastered surfaces including preparation of new wall surface complete all as specified and directed.

Material and labour for preparation of old treatment on external surfaces of walls and washing down with water to receive the surface and applying one coat of cement base paint (colour and tint as approved) on walls etc complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer including chalk whitening etc complete all as specified and directed Make :-Snowcem/Asian guttu/Duracem/Acrocem/Ecocem/Rubicem (J&N) or equivelent.

Material and labour for preparation of old distempered surface of wall incl washing down and stoping of distempered surface and appliying one coat of distemper oil emulsion all as specified and directed Make :-Snowcem/Asian guttu/Duracem/Acrocem/Ecocem/Rubicem (J&N) or equivelent.

Preparing old plastered surfaces of wall and applying one coat of white wash complete all as specified and directed.

Preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation of wood or wood based material over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. Make:- Berger Luxol HI Gloss/Borolac (J&N) /Nerolac/Asian paints Apcolite/Superlac (Shalimar)/Dulux or equivalent.

Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. Make:- Berger Luxol HI Gloss/Borolac (J&N) /Nerolac/Asian paints Apcolite/Superlac (Shalimar)/Dulux or equivalent.

Material and labour for treating small articles such as hold fasts,ends of posts, backs of chowkats,etc.,area exc 0.1 sq.m each,complete all as specified. with tar or coal tar black paint incl preparation complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. Make:- Berger Luxol HI Gloss/Borolac (J&N) /Nerolac/Asian paints Apcolite/Superlac (Shalimar)/Dulux or equivalent.

Supply and fixing 15 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed. Make :- Jindal/TATA/Prakash Surya/Swastik/Appolo/BST/Kalinga/Goodluck or equivelent.

Refixing 15 mm bore old steel tubing and conncetions with new fittings in new or old position to walls , floor, ceiling complete all as specified and directed.

Supply and fixing 20 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complete all as specified and directed. Make :- Jindal/TATA/Prakash Surya/Swastik/Appolo/BST/Kalinga/Goodluck or equivelent.

Refixing 20 mm bore old steel tubing and conncetions with new fittings in new or old position to walls , floor, ceiling complete all as specified and directed.

Supply and fix in repair 15mm dia bib tap, cast copper alloy chromium plated with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed

Supply and fix in repair 15 mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply and fix in repair 15mm bore stop valve, fancy type chromium plated, screwed down high pressure, screwed both ends for iron pipe or or for unions complete all as specified and directed.

Supply and fix in repair 15mm bore angular stop valve, fancy type chromium plated, screwed down high pressure, screwed both ends for iron pipe or or for unions complete all as specified and directed.

Supply and Fix in repair Gun metal globe or gate valve with Iron wheel head, screwed both ends for 20 mm dia of pipe complete all as specified and directed.

Supply and fix rotational moulded polythene water storage tanks of 500 ltrs capacity (multilayered ,cylindrical, vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing water tank complete all as specified and directed. Make:- Sintex/Polycon/Finolex/Rotex/Displast/J S Polyplast or equivalent.

Supply and fix ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20 mm dia complete all as specified and directed.

Supply and fix in repair vitreous china squatting pan 'Orissa pattern' size 580x440 mm white, with 'P' or 'S' trap front and back inlet with integral foot rests excluding flushing cistern and flush pipe including provision of lime concrete bedding and making good to floor complete all as specified and directed. Make :- Parryware (Super fine)/Cera (frist quality)/Hindware/Hindustan/H R Johnson/Neycer Kenmag/Jaquar.

Supply and fix in repairs vitreous china wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia complete all as specified and directed. Make :- Parryware (Super fine)/Cera (frist quality)/Hindware/Hindustan/H R Johnson/Neycer Kenmag/Jaquar.

Supply and Fix in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern, low level, white with inlet ball valve, float and handle including brackets etc complete all as specified and directed. Make:- Hindware/Johnson Pedder/Hindustan sanitaryware/Shakti brand or equivalent.

Supply and fix in repair sinks with drainage board made of stainless steel 1.00 mm thick kitchen with plug washers, wastes;including bedding in cement mortor on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 x 460 mm with bowl size 410 x 330 x 160mm, complete all as specified and directed.

Supply and fix in repair PVC connection 15mm dia 450 mm long with brass check nuts and washers complete all as specified and directed.

Supply and fix 32mm LDPE(Low density polyethylene) Pipe of pressure rating 6 kgf /sq.cm and fixed ti wall, ceiling, or floor etc including taking down/up unserviceable pipe complete all as specified and directed.

Supply and fixing in repair brass chromium plated shower rose 125 mm dia with swivel joints including fixing to steel pipe or union complete all as specified and directed.

Supply and Fix in repair Tubular towel rail 20mm dia, D type, 60cm long between flanges and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed. Make : Jaquar cat part No CAN1/1/NM

Supply and fix in repair grating doom 125 mm dia of PTMT including jointing with solvent cement omplete all as specified and directed.

Supply and fix PVC (SWR) pipes single socketed 75 mm dia soil, waste and ventilating pipe in any length with rubber ring jointsfixed to wall, complete all as specified and directed. Make :- Supreme/Kisan/Tirupati/Finolex/Prince.

Supply and fix PVC (SWR) pipes single socketed 110 mm dia soil, waste and ventilating pipe in any length with rubber ring jointsfixed to wall, complete all as specified and directed. Make :- Supreme/Kisan/Tirupati/Finolex/Prince.

Supply and fix PVC (SWR) bends with access door 75 mm bore of any radius complete all as specified and directed. Make :- Supreme/Kisan/Tirupati/Finolex/Prince.

Supply and fix PVC (SWR) bends with access door 110 mm bore of any radius complete all as specified and directed. Make :- Supreme/Kisan/Tirupati/Finolex/Prince.

Supply and fix 110mm bore PVC (SWR) junction single , (single Y) equal or unequal with access door complete all as specified and directed. Make :- Supreme/Kisan/Tirupati/Finolex/Prince.

Supply and fix 75 mm bore PVC (SWR) junction single , (single Y) equal or unequal with access door complete all as specified and directed. Make :- Supreme/Kisan/Tirupati/Finolex/Prince.

Supply and fix 110mm bore PVC (SWR) junction single , (single T) equal or unequal with access door complete all as specified and directed. Make :- Supreme/Kisan/Tirupati/Finolex/Prince.

Supply and fix 75 mm bore PVC (SWR) junction single , (single T) equal or unequal with access door complete all as specified and directed. Make :- Supreme/Kisan/Tirupati/Finolex/Prince.

Supply and fix PVC (SWR) gully trap, 75mm dia outlet, plain with grating incl jointing with solvent cement complete all as specified and directed. Make :- Supreme/Kisan/Tirupati/Finolex/Prince.

Taking down 75mm rain water pipes/vent pipes including all fittings, heads shoes, bends,swan nacks etc including cleaning or refixing or removing to store complete all as specified and directed.

Taking down 110 mm rain water pipes/vent pipes including all fittings, heads shoes, bends,swan nacks etc including cleaning or refixing or removing to store complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder,ceiling roses, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed.

Taking down carefully by unscrewing from board/outlet boxes, fittings and fixture such as main switches & DBs of any size and any capacity and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed.

Taking down the existing unserviceable sub main wiring of any type/description as existing at site including making good the disturbud surfaces to match with the existing finished complete all as specified and directed.

Taking down UG cable of any type and any size and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed.

Material and Labour for Point wiring with 1.5 sq mm copper conductor single core flame retardant PVC insulated unsheathed 1100 volts multistranded drawn through and including PVC Rigid concealed conduit medium grade of suitable size ISI marked and pressed steel terminal boxes of 1.22 mm thick MS of suitable sizes duly painted with red oxide metal primer including fixing/grouting sunken as per site requirement provision of 3mm thick ISI lamination hylem sheet for mounting the switches , sockets, regulators etc including running up of 1.5 sqmm copper conductor flame retardant PVC insulated cable as earth contunity conductor alongwith wiring and connecting to the common earth dilly all as specified for one light point controlled by one, one way switch 5 Amps.

All as per item No 127 here-in-before but for one ceiling fan/Exhaust fan point controlled by one way

All as per item No 127 here-in-before but for one 5 Amp socket outlet three pin controlled by one switch on the same board complete all as specified and directed

All as per item No 127 here-in-before but for one 5 Amp socket outlet three pin controlled by one switch on independent board.

All as per item No 127 here-in-before but for one light point controlled by two, two way switch 5 Amp.

All as per item No 127 here-in-before but for one bell point controlled by one switch.

All as per item No 127 here-in-before but for 3 pin 15 Amps socket outlet independant board drawn from DB and including PVC insulated multi stranded copper conductor FRLS Grade 2.5 sqmm 1100 volts grade and earth continuity wire 1.5 sqmm PVC insulated copper FRLS Grade wire (Green) complete all as specified and directed.

Supply and fix switch piano flush type single pole one way 5 Amp 240 volts complete all as specified and directed

Supply and fix switch piano flush type single pole two way 5 Amp 240 volts complete all as specified and directed

Supply and fix Bell push flush type 5 Amps, single pole, one way complete all as specified and directed.

Supply and fix Bell ding dong type 5 Amps, single pole, one way complete all as specified and directed.

Supply and fix socket outlet 2 in 1, 5 Amps flush type 240 volts complete all as specified and directed .

Supply and fix switch socket combination multipurpose 3/5 pin , 5/15 Amps flush type 240 volts complete all as specified and directed .

Supply and fix switch socket combination multipurpose 2/3 Pin 5 Amp Two in one, 240 volts complete all as specified and directed.

Supply and fix ceiling rose surface bakelite 65 x 50 mm two to three terminals AC 230 volts complete all as specified and directed.

Supply and fix ceiling fan regulator step type, flush type heavy duty suitable to work on 230 volts AC supply complete all as specified and directed.

Supply and fix lamp holder, insulated body, with back plate for angular batten fittings with one PVC block of size 75mmX75mm for mounting the fitting including 10 watt LED lamp cat no LHLDERHEMD8X010 MAKE HAVELLS complete all as specified and directed.

Supply and fix sheet metal enclosures for DBs (Double door type) when MCB TPN 4 way with 200 Amps 415 Volts rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

Supply and fix sheet metal enclosures for DBs (Double door type) when MCBs to be used 240 volts 8 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

Supply and fix MCB four pole 40/63 Amp 415 volts, confirm to IS /IEC 60898 breaking capacity of 10 KA, complete all as specified and directed. Make :- L&T cat No BB40630C or equivalent Havells/Bajaj/Crompton

Supply and fix MCB Double pole 32 Amp 415 volts, confirm to IS /IEC 60898 breaking capacity of 10 KA, complete all as specified and directed. Make :- L&T cat No BB20320C or equivalent Havells/Bajaj/Crompton

Supply and fix MCB SP 6-32 Amp 240 volts,50 HZ , confirm to IS /IEC 60898 breaking capacity of 10 KA, C-curve complete all as specified and directed. Make :- L&T cat No BB10320C or equivalent Havells/Bajaj/Crompton

Supply and fix wall mounted LED 18 watts, box type (decorative) light fitting, 230 volt with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from celling rose to fitting including LED tube 4' x 18 watts complete all as directed by Engineer-in-Charge. Make :- Havells, Cat part No LHLDCLXEUL83018, LHFYBPNIA1W022 or equivalent in Bajaj & Crompton.

Supply and fix Decorative wall mounted luminaire made out of polycarbone with unbreakbale globe suitable for LED bulb and provison of LED bulb 10 to 15 Watts Complete all as directed by Engineer-in-Charge. Make :- Philips Cat part No UNO 30573, LHLDERHEMD8X010 or equivalent in Havells, Bajaj & Crompton.

supply and fix Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 15 Watts with with opel diffuser pre wired and necessary mounting arrangement provision of new 3 core multistanded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as directed by Engineer-in-Charge. Make :- Havells Cat part No LHETBXU7PA6S025 or equivalent in Bajaj,& Crompton.

Supply and fix wire for circuit or sub main wiring alongwith earth wire1100 volts grade double core PVC insulated and unsheathed cable with stranded copper conductor 2 core 6 Sqmm on surface or recessed or drawn in PVC casing capping along with 4.00 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed. (Note: One RM PVC casing capping ,one run of 2.5 sqmm earth wire and 2 Run of 6 sqmm cable shall be measured as one run.)

Taking down ceiling fan of any sweep, keeping with safe custody and hanging/fixed in repair the same with replacement of UNSV PVC insulated PVC sheathed 3 corte multistandard copper conductor cable of size 23/0.193 from ceiling rose to fan terminal conductor complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for foundation and getting out in soft/loose soil complete all as specified and directed.

Returning,filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick, in hard/dense soil complete all as specified and directed.

Removal of surplus soil of distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed..

Supply and spread fine dry river sand for cable cushioning in trenches complete all as specified and directed. (Note:- Sand shall be measured and paid puneshed thickness)

Supplying and laying well brunt brick,locally available best quality (Sub class 'B' bricks) laid in trenches perpendicular to UG cable protections complete all as specified and directed

Supplying, testing,commissioning and laying LT UG Cable of size 4 Core 16 Sqmm laid in trences/floor/on wall/service connection PVC insulated, sheathing and armd 1100 volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed

Supply and fix GI tubing 40 mm dia ' Light grade', in trench or on wall for the protection of UG cable complete all as specified and directed. Make :- Jindal/TATA/Prakash Surya/Swastik/Appolo/BST/Kalinga/Goodluck or equivelent.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron. Earth strip protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer In Charge.

Markson

bkgeneralstores

M/S Mahabir Traders

M/S Vandana Enterprises

M/S RANA ENGINEERING ENTERPRISE

M/S SHARMA CONSTRUCTION