REPAIR MAINT OF DRAIN, PATH, CATTLE FENCING, AND CULVERT AT ZONE 17 AND 12 AT MIL STN TALBEHAT

Amount

Taking down cement or cement lime plaster on brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick plaster in CM 1:4 on fair faces of brick work or concrete surface finished even and smooth w/o using extra cement complete all as specified and directed.

M&L preparation new plastered surfaces of walls and providing two coat of cement base paint over a coat of primer complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. Note: All debris obtained from demolition shall be removed 1.5km to 2km complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.

M&L for PCC interlocking tiles, with grey cement no pigment reflective type conforming to IS-15658-2006 of 60mm thick , M-35 grade of approved quality, laid over and incl 50 mm thick sand cushion vibrated with mechanical vibrator complete all as specified and directed.

M&L for PCC interlocking tiles, with grey cement pigment conforming to IS-15658-2006 of 60mm thick , M-35 grade of approved quality, laid over and incl 50 mm thick sand cushion vibrated with mechanical vibrator complete all as specified and directed.

M&L for PCC interlocking tiles, coloured, reflective type, conforming to IS-15658-2006 of 80mm thick , M-40 grade of approved quality, laid over and incl 50 mm thick sand cushion vibrated with mechanical vibrator complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20 cm / 30cm x 30cm,25 mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm screed bed in CM mortar 1: 6 all as specified &directed.

M&L for Heavy duty ceramic tiles size 300x300x 8-10 mm thick any colour set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile laid over 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm crushed stone aggregate) as in sub base or similar work complete all as specified and directed.

M&L PCC (1:3:6) type C-2 using 20mm graded stone aggregate 75mm thick as in plinth protection finished fair even laid in alternate bays n.exc 2m in length all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in PCC band, PCC beam, benching of drain, coping, slightly rounded or chamfered angles and throating, and similar work as directed etc complete all as specified.

Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered and directed.

M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Ditto above item except brick complete all as specified and directed.

Providing precast cement concrete type B1 1:2:4 20 mm graded aggregate as in cover slabs for septic tank/ manholes/drains set in cement Mortar 1:4 complete all as specified and as directed.

S&F of Solid FRP man hole cover of size 60cmx60cm with handle weight not less than 12kg fitted to manhole any type and surface making good in CM 1:3 complete all as specified and as directed. Make : Fluton polymers/Sigma or as equivalent brand all as specified and directed.

Dismantling post or struts(wood, steel or RCC) any section including taking out embedded portion from natural ground and making good the disturbed ground complete all as specified and as directed by Engr-in-Charge.

Dismantling of Barbed wire fencing or any type and size

Excavation in post holes (or similar holes) each n exc 0.5 cum getting out, returning, filling in and ramming earth and removing surplus soil to a distance n.exc 50 m in soft/loose soil complete all as specified and directed.

M&L for PCC 1:3:6 , type C-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete & similar work complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in PCC band, PCC beam, benching of drain, coping, slightly rounded or chamfered angles and throating, and similar work as directed etc complete all as specified.

Formwork to edges of concrete flats, treads, breaks in floors,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls,or beam horizontal or sloping and similar work exc 10cm but n exc 20cm wide.

S&F MS hand rails, half round or other stock section or core for wooden hand rail,straight portion drilled and countersunk for balusters, running bars, door frame, balusters, nosing to steps including embedding in concrete land screwing etc frame of wiremesh wind tiles for roof including securing bolts, posts, struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc, flat iron, fillets(for securing wire mesh etc including all necessary drilling bolting welding or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engr-in-Charge.

Supply only chain link MS galvanized medium coated confirming to as per IS-2721-1979 fencing 75mm x 75mm mesh & 3.00 mm dia of wire complete all as specified and directed.

Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provn of binding wire complete all as specified and directed.

S&F expanded metal welded steel wire fabric, made of GI hard drawn wire mesh of size 25mmX25mm, plain steel wire with hot Zinc coating , fixed to MS frame work complete all as specified and as directed.

Supply & Fixing Galvanized. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc.as directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in loose/soft soil complete all as specified and directed.

S&F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for Chain link fencing confirming to Fe 410-w (Gde E-250) complete.

M&L for 5 to 10 mm dia mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers etc complete all as specified and directed.

Preparation of new steel surfaces of any description n. exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new steel surfaces over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down sign boards of any type and any size complete in all respects specification complete all as specified and directed by Engineer-in-Charge

S&F in repair for ACP background sheet for thickness (3mm to 4mm ) and fixed in angle and other section frame in any position specifications complete all as specified and directed by Engineer-in-Charge. Note:- (i) The design of each board,size,shape,colour,thickness shall be approved by Engineer-in-Charge. (ii) Using of T&P etc to be included in this item. (iii) Frame work and paint work shall be measured and paid separately.

S&F for for stainless steel letter (3 dimension) mirror finish for outdoor (height min 10") and width of letter is ( 3" to 12" as per reqd) . The letter are fixed in ACP sheet sign board with using of adhesive paste/ screw and bolt properly in any position complete all as specified and directed by Engineer-in-Charge. Note:- (i) The design of letter,colour, thickness and size shall be approved by Engineer-in-Charge. (ii) Using of T&P etc to be included in this item. (iii) Dismantling and refixing of sign board in same place to be included in this items.

S&F Framed/ Unframed work as in sign board of angle or other section with gusset plates,rails,braces,also small article etc complete, all small articles including drilled for fixing of steel/ACP sheeting or other covering etc to be prepared for hanging and including either hooks, welding and hanging also fastening and fixing complete all as specified and directed.

Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)

M/S SHIVA TRADERS

HARNAM SINGH ANIL SINGH

M/s Hansraj Shivhare

M/s Dinesh Kumar

M/S SACHENDRA KUMAR JAIN