SPECIAL REPAIR WORK FOR EXISTING UNSERVICEABLE UNDERGROUND CABLE AND HPSV/ MH SECURITY LIGHTS WITH LED FITTINGS OF THREE PHASE CONNECTION IN PINAKA SHED FOR CHARGING OF BTYS OF 841 RKT REGT (PINAKA) UNDER GE (SOUTH) AKHNOOR

Amount

Disconnecting and taking down the existing street/security/ Post top lantern light fittings from poles/ buildings of any type or any wattage, complete all as specified and directed.

M&L street light fittings LED streetlight 45 W , 5700K, made up of pressure die cast housing with toughned glass , IP66 protection, impact resistance of IK07 & 10 KV external SPD complete in all respect, complete all as specified and directed. Make HPL CAT NO HPLLEDSL4560P/ Crompton cat No LSTS-45-CDL-M or equivalent in Philips

Supply & Fix LED streetlight made up of pressure die cast housing with toughned glass and individual high power CREE LEDs with secondary optics, Potted driver, IP66 protection and impact resistance of IK07.LED street light fittings LED streetlight 90 W, 5700K, complete , complete with all connected accessores for fixing on poles with suitable size of clamps, nut bolts, washers, complete all as specified and directed. Make : HPL cat NO HPLLEDSL9060E/ Crompton cat No LSTP-90-CDL-M or equivalent in Philips

S & F Integral pole mounted decorative LED post top 25 watt capacity with spherical shade polycarbonate diffuser and IP65 protection mounted on existing gate top or mounted on wall with necessary masonary works for fixing, also using 2 runs of 1.5 sqmm unsheathed copper cable passing through conduit 20 mm from connector to the light fitting and including taking down the old fttings, complete all as specified and directed. Make Crompton Model No; BLPTSP 25W NW LED or equivalent of Philips

Taking down old U/S junction box and Supply & Fix junction box water proof out door type made out of SMC sintex make of external dimensions 400 x 300 x 190 single door type hinged with locking arrangement front operated with one number MCB 15 Amps capacity for housing 3 phase and neutral bus bar, including connecting the incoming/out going cables including cable glands SMC coated clamps bolts etc, complete all as specified and directed and fixed to the existing poles with mild steel flat of size 25 mm x 4 mm. Make - Sintex Cat GS JB 4020 or equivalent.

Taking down old unserviceable XLPE cable any type and any size, complete all as specified and directed.

M&L Monkey cagging and anti climbing device, bracing,supports,clamps and back plates fabricated from structrural steel section including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat,one under coat and one finishing coat of paint. NOTE: Size and specification of cagging, complete all as specified and directed.

M & L for XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area of size 16 Sq mm, 4 core, complete all as specified and directed. Make : Paragon, Havells or equivalent.

M & L for XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 1100 volts, grade cross sectional area of size 10 Sq mm, 4 core, complete all as specified and directed. Make : Paragon, Havells or equivalent.

M & L for excavation in trenches,for laying under ground cable, errection of poles and stays in any type of soil not exc 1.5 Mtr wide and not exc. 1.5 m in depth for foundation and getting out, complete all as specified and directed.

M & L for unwashed sand cushioning below and around cable in trenches with river sand, complete all as specified and directed.

S & F burnt bricks sub class 'B' designation for cable protection laid adjacent to each other perpendicular to the direction of cable in trehnches, complete all as specified and directed.

M & L for removal of surplus soil to a distance not exceeding 50 mtrs and depositing where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed.

M & L for returning filling in including spreading, levelling, watering and ramming in layers not exceeding 25 cm thick with earth obtained from excavation, complete all as specified and directed.

Material and labour for providing cement concrete 1:2:4 type B-2 (using 20 mm graded crushed stone aggregate) for coping of poles including necessary form work and finished the surface, complete all as specified and directed.

Taking down old U/S existing twin core PVC copper cable and Supply & Fix PVC multi stranded PVC copper cable, twin core of size 2.5 Sq mm for connection from junction box/conductor to street light/security light fittings including taking down, complete all as specified and directed. Make : Finolex, Havells or equvialent.

Taking down old U/S existing PVC conduit and Supply & Fix PVC conduit 25 mm dia for protection of PVC copper cable from Junction box to security light. Including taking down, complete all as specified and directed.Make : Superplast, Kinjal or equivalent.

Taking down old U/S existing GI pipe 40mm dia and Material & Labour for GI Tubes, light grade, galvanised, with all fitting, and fixed to pole for protection of cable of size 40 mm bore, complete all as specified and directed. Make : Prakash Surya, Jindal or equivalent..

Supply & fixing and stringing of GI earth wire and cradle guard support wire of 3.15 mm dia on LT pole incl galvanized binding wire of size 14SWG and J hooks etc, complete all as specified and directed.

Taking down old U/S existing bracket and Supply and fixing light bracket made out of GI pipe 1.5 Mtr long, 40 mm dia medium grade bent to shape as directed including clamps made out of 40 mm x 6 mm flat for fixing bracket suitable for PCC poles including nuts and bolts, washers and other connected items of required size including painting with one coat of aluminium paint over a coat of red oxide/primer, complete all as specified and directed.

PCC 1:4:8 type D-2 using 40 mm graded aggrgate for filling in foundations of Panel Board, HT/LT poles, complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead galvanised iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point, complete all as specified and directed or indicated including testing on completion including dismantling of old u/s earthing.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead galvanised iron strip size 32x6 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point, complete all as specified and directed or indicated including testing on completion including dismantling of old u/s earthing.

Taking down old U/S existing PCC pole, and Supply and errection of PCC poles size 9 Mtr long 102 mm x 172 mm at top and 102 mm x 279 mm at bottoms class-10 including painting 5 Nos of strips in white and black colour 30 cm wide each 1.5 Mtr from PCC couping on ground level and numbering with black paint in circle of 100 mm dia painted with yellow paint, complete all as specified and as directed.

Aluminium conductor steel reinforced (ACSR) on poles, stretching without kinks and bends binding with and including binding wire, complete all as specified and directed including old U/S taking down existing.

M&L Shackle type porcelain,white insulator including one galvanised mild steel straps, galvanised iron washer insulator bolts, washers and nuts as under 75 mm heigth,90 mm dia for 1100 volt grade, complete all as specified and directed including old U/S taking down.

Cross arms, bracings, supports,clamps and back plates fabricated from structural steel sections including nuts, bolts, washers,welding, bending cold or hot,drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint, complete all as specified and directed including old U/S taking down.

M &L for Stay assembly complete with 19mm dia 180cm long stay rod 300 mm X 300 mm X 3 mm thick galvanized MS stay plate, loop insulator vitreous porcelain white or brown or green with overall dimension 90 mm X 140 mm clearances of hole 25.5 MM galvanized stay wire stranded of size 7/3.15 mm suitable length complete with all accessories as shown in electrical plate No 01 of MES schedule part I (1991), complete all as specified and directed. (Excavation, Earth work and concrete work in foundation shall be measured and paid separately).

Clearing of LT/HT line 2 mtr all around by cutting tree branches of any numbers and any girth on any numbers of conductors/earth wire, complete all as specified and directed by Engr in charge.

Taking down and supply and fixing of separator/spacer made of good quality hard plastic to with stand on 1100 volt over LT OH line using required number of plastic nuts and bolts etc suitable for following number of conductor, complete all as specified and directed. Make:-Jaipur/Dension/M-seal/Modern:- (a) 2 conductor

(b) All as per Srl item No. 31 above but 3 conductor

(c) All as per Srl item No. 31 above but 4 conductor

M/S D.P ASSOCIATES

MAMTA ENTERPRISES

SUMEET TRADING CORPORATION

CHOPRA CONSTRUCTIONS

darshan kumar gandhi

Jiwan Singh

Usha Engineering Co.