Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.7 LAccepted-AOC | L1 | Accepted-AOC FIRST LOWEST BIDDER | |
| 2 | L2₹34.8 L+₹2,749 (0.08%)Rejected-AOC NEAR PUNJAB NATIONAL BANK KANDOLI NAGROTA JAMMU J K 181221 | JAMMU | JAMMU | JAMMU AND KASHMIR | 181221 | L2 | Rejected-AOC SECOND LOWEST BIDDER | |
| 3 | L3₹37.8 L+₹3.0 L (8.75%)Rejected-AOC | L3 | Rejected-AOC THIRD LOWEST BIDDER | |
| 4 | L4₹38.1 L+₹3.3 L (9.51%)Rejected-AOC | L4 | Rejected-AOC FOURTH LOWEST BIDDER | |
| 5 | L5₹40.4 L+₹5.7 L (16.4%)Rejected-AOC | L5 | Rejected-AOC FIFTH LOWEST BIDDER |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
20 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAGROTA
GE NAGROTA
ADDITION ALTERATION OF BUILDING NO TN 274 AND CERTAIN OTHER SANCTIONED WORKS UNDER AGE BR I OF GE NAGROTA
2023_MES_593268_2
8524/E8
Open Tender
Civil Works
Item Rate
180 days
GE NAGROTA
Class D category a i
8 documents required · 8 mandatory
₹500
GE NAGROTA
₹86,000
Yes
1 Jul 2023
1 Jun 2023
22 Jun 2023
1 Jun 2023
20 Jun 2023
8 Jun 2023
Amount
SCHEDULE ‘A’ PART-I Dismantling steel sheeting, any gauge, thickness, including Nainital or similar pattern (plain or corrugated) in roof coverings including ridges, eaves etc complete all as specified and directed.
Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed.
Demolition of cement concrete including floor tiles or stone in any description and any position etc removal from site up to 500 m complete all as specified and directed
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as sepcified and directed
Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but nexc 4.0 sqm each complete all as specified and as directed.
Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), and rubbish off the premises complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed
M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6m mean radius built in cement mortor 1:6., etc complete all as specified and directed.
S&F mild steel work in angle Iron / tubular trusses for purlins, rafters,tubler column,and running rails fixed with angle cleat or other connection plates, etc including special shaped washer etc,complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 , etc complete all as specified and directed.
S&F 0.50mm thick (total coated thickness) pre-colour, pre-profiled Galvalume sheets of required colour and design having tensile strength of 550 Mpa as in roof, wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer/profile maker instruction complete all as specified and directed.
All as per Item No-11 above but except sheets (obtain from dismantling) complete all as specified and directed.
S & F pre - painted galvalume aluminium zinc coating plain sheeting 0.50 mm thick of required colour and shape having tensile strength of 550 Mpa as in ridge valley,gutters,barge board,roof covering / cladding to wall, fixed with self tapping screwes complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed
M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick or concrete surface with liquid water proofing compound @ 200 ml per bag finished even and smooth without using extra cement complete all as specified and as directed.(Note:- Liquid water proofing compound to be measured paid separately)
Supply only Liquid water proofing compound complete all as spesified and directed.
Supply and fix suspended ceiling of plaster of paris 12.5 mm thick which include GI perimeter channel of size 20 x 27 x30x0.5 mm thick along perimeter of ceiling screwed/fixed to brick wall or existing supports at 610 mm centre to centre suspending GI intermediate channel of size 15x.15x0.9mm thick from the slit at 610 mm centre with ceiling angle (GI) of size 25 x 10x0.55mm thick fixed to the sollit with GI cleat 0.5 mm thick having knurted web of 51.5mm and two flanges of size 26mm each with lips of 10.50 mm fixed to the intermediated channel with the help of connecting clip and in the direction perpendicular to the intermediate channel at 300 mm centres, POP ceiling boards of size 1220mm width x 12.5 mm thick screwed to ceiling section with 25 mm long wass screw @ 230mm centres, screw fixed mechanically either with screw driver or drilling machine with suitable attachment. Ceiling shall be sealed at joints and finished with jointing compound etc complete including finishing the exposed surfaces of false ceiling with two coats of plastic emulsion paint over a coat of primer complete all as specified and directed
Supply and fix plaster of paris cornices moulding of size 200mm wide x 100 mm type ‘A’ screwed to ceiling ;and wall finishing and filing the joints complete with finishing surface all as directed.
S & F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre /intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section of 0.55mm thickness having kurled web of 50mm and flange of 26mm each lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete size of grid 605 x 605mm all as specified and directed
S & F 5mm thick Printed PVC sheet used instead of plain colour PVC shectplain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site.
S & F framed work such as grills, gratings etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters,walk ways, railings, framework of water tanks and similar works conforming to Fe-290 Gde E 165.
Mild steel TMT bars 10mm dia and over , cut to length, bent to shape reqd, including cranking, bending spirally for hooping for columns, hooking ends , and binding with and incl binding mild steel wire(annealed not less than 0.90mm dia or securing with clips
Demolition of reinforced cement concrete of any description and in any position not otherwise described comlplete all as specified and directed.
M&L Reinforced Cement Concrete M-25 using 20 mm graded stone aggregate as in slabs supported on walls, kitchen slas, manholes covers, deck slabs and in drain cover slabs , shelves and similar works etc complete all as specified and directed
M & L for formwork to fair finished surface for kitchen slabs, such as roof slabs drain covers and similar work, not exceeding 200mm thick (horizontal or sloping), etc complete all as specified and directed.
M & L for vitrified light shade floor tiles 10mm thick (square/ rectangular) area of each tile not exc 0.36 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) fixed in repairs complete all as specified and directed.
M&L in repair for glazed ceramic coloured tiles of size 300x450x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.
M & L Non-skid ceramic coloured tiles 8mm thick(square or rectangular) coloured joint free area of each tiles exc 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bedding layer of cement mortar in CM 1:6 fixed in repairs complete all as specified and as directed.
M & L for 10 mm thick endura exterior tile light shade (square/ rectangular) area of each tile not exc 0.09 sqm but not exc. 0.18 sqm in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface over & incl 15mm thick screed bed or bedding layer in CM 1:4 fcomplete all as specified and directed.
M&L preparation of newly plastered surface and using sand paper to have even and smooth surface and applying 2-3 mm thick JK/BIRLA white putty on prepared surface and applying two coats of weather coat paint (Weather coat Exterior emulsion )manufactured by Berger' or Asain Apex white or tinted over a coat of white water base primer complete all as specified and directed by Engr in charge.
M&L preparation of new surface of wall and applying 2-3 mm thick JK/BIRLA white wall care putty and applying two coats of plastic emulsion paint over a coat of oil based primer complete all as specified and directed
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
S&F 12mm thick toughened or tampered glass (tuffen glass) thermal and chemical treated with heavy strength of fine polished edge as in doors with SS long body handle, pivots, floor springs and locking arrangements of heavy duty accessories. It made from annealed glass via a thermal tempering process and toughening process. The glass compressive strength should be minimum 69 mps itching and cluster work as per sample kept in GE's office complete all as specified and directed by manufacturer's instruction complete all as specified and directed by Engr in charge.
S&F Double action floor spring hydraulically regulated made up of stainless steel foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty suitable for toughen glass shutters complete all as specified and directed by Engr in charge. Make:- ENOX (Cat No FH-ECO-842) or similar type hardware fitting of make GODREJ / DORMA / OZONE
Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc making good of disturbed surface all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370).Make- Jinal Section,
S & F 5.5mm thick Sheet glass,ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed by Engr in charge. .
S & F stainless steel wire cloth. 0.63 mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed by Engr in charge.
S&F 3mm thick PVDF coating aluminium composite wall cladding as approved by GE on Facia, column and other decorative faces including MS frame work as approved by Engr-in-Charge complete all as specified and as directed. Note :- Painting to MS frame work will be imeasured and paid seperately.
Taking down or up steel 20mm bore water tubing and connections including cleaning complete all as specified and directed.
Taking down or up steel 15 mm bore water tubing and connections including cleaning complete all as specified and directed.
M&L for 20mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by Engr in charge.
M&L 15mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed by Engr in charge.
M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth complete all as specified and directed by Engr in charge.
S& F Bib cock with wall flange15mm bore Chromium Plated , screwed down high pressure with crutch or butterfly handle, screwdd both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr in charge.
S& F PVC Conncetions 15mm size with PTMT Nuts of length 450mm and fixed including taking down unserviceable PVC Connections complete all as specified and directed by Engr in charge.
S& F angular stop cock 15mm bore fancy type Chromium Plated with wall flange complete all as specified and directed by Engr in charge.
S&F Vitreous china wash down water closet pan (pedestal pattern) wall hung EWC (size-370x510x360mm) including PP Soft close seat cover, hinges, accessories set and all fittings complete all as specified and directed. Make:- Jaquar-CNS-WHT-963NS or equivalent of make as specified in PS
S&F white vitreous china counter wash hand basin, of size-410X910X150mm fixed in granite counter by making suitable size hole, new brackets, 32mm dia brass chromium plated waste coupling, CP botle trap complete all as specified and directed by Engr in charge. Make:- Jaquar-JDS-WHT-25911 or equivalent of make as specified in PS Note:- Granite counter will be measured & paid separately.
S&F health faucet with 1 meter long easy flex tube in chrome finish & wall hook, complete all as specified Make:- Jaquar-ALD-565 or equivalent of make as specified in PS
S & F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.
S & F in repair CP toilet paper holder with flap and fixed in position.complete all as specified and as directed.
M & L CP towel rail of 20 mm dia 60 cm long fixed in repair. complete all as specified and as directed.
M & L CP towel ring complete fixed in repair.complete all as specified and as directed.
M & L CP soap tray fixed in wall complete all as specified and as directed.
S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard and railing 60cm long complete Make- Jaquar Cat No - CAN-1173 complete all as specified and as directed.
S & F PVC (SWR) pipe 110mm bore single in any type with rubber ring joint laid in wall/trenches /floor complete all as specified and as directed..
S & F PVC (SWR) bend any radious 110mm bore complete all as specified and as directed.
S & F PVC (SWR)gully trap 125/110mm setting and jointing with solvent cement as fixed in repairs complete all as specified and as directed.
S & F PVC(SWR) reducers 75/110mm bore complete all as specified and as directed.
S & F 100mm Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
S & F PVC (SWR) pipe 75mm bore single in any type with rubber ring joint laid in wall/trenches / floor complete all as specified and as directed..
S & F 75mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
S&F for PVC (SWR) floor/ nahani trap 75mm with gratings including Jointing to waste pipe with solvent cement complete all as specified and as directed. .
S & F rotational moulded 1000 lit capacity polythelene water storage tanks ( cylindrical verticle with closed top) hoisted and fixed in position complete all as specified and as directed.
S & F 20 mm bore ball brass valves high pressure with polythelene float and fly nut complete screwed for iron pipe and fixed complete all as specified and as directed. .
S & F 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid,bedded and pointed in any mortar complete all as specified and as directed..
M & L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with providing 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed..
S & F for PVC and cupboard shelf/ partition/ frame / shutter of 18mm thick side of panel externally impact perfact finish to the shutter and joined together with solvent cement adhesive 8mm thick (4mmx2)x12mm wide PVC sheet is used as gap insert for top & bottom rail, 18mm x 1mm PVC edge lipping is done on top & bottom side using PVC solvent cement adhesive etc complete as per direction of Engr-in-charge, manufacture's specification and drawing.
Preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying two coat of Oil bound distemper on walls over 2mm thick plaster of paris putty as specified and directed by Engr-in-Charge.
Preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 2mm thick plaster of paris putty as specified and directed by Engr-in-Charge.
Preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm on walls over 2mm thick plaster of paris putty as specified and directed by Engr-in-Charge.
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation or etc, for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard dence soil, complete all as specified and directed.
Excavating over areas for septic tank and soakwell, in harddense soil soil n exc 1.5 m deep and getting out, complete all as specified and directed.
M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing, and mass concrete , etc complete all as specified and directed
Removing excavated material (soil) to a distance not. exc. 50 mtr and depositing where directed at a level nexc 1.5 mtr above the starting point complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on other than fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.
M & L cement concrete type B1 1:2:4 ( 20 mm graded aggregate) as in coping, bearing course, manhole/ drain channels etc in including necessary formwork complete all as specified and directed.
M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregatre as in surface channels and drains complete all as specified and directed.
M&L for Extra for forming fair finished drain or channel 30 cm to 45 cm inner girth in cement concrete, using extra cement, including forms moulds, mitred/stopped ends etc complete all as specified and directed.
M & L for preparing new plastered surface and applying three coat of white wash complete all as specified and directed.
M&L for concrete bed to drain pipes including packing under, and haunching against the sides of 150 mm bore pipes in cement concrete 1:3:6 type C-2 ( using 40 mm graded stone aggregate) after they are laid and tested complete all as specified and directed.
M&L for 150 mm bore salt glazed stone were (SGSW) drain pipe grade 'A' laid to slope in tranches and jointed in cement mortar (1:1) including necessary testing for ensuring teak proofing complete all as specified and directed.
M&L for surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in any type of soil as as specified and directed.
M&L for hardcore of gauge n exc. 63 mm deposited, spread and levelled in layers n exc. 15 cm thick, broken stone or boulders (150mm thick) including rolling with power roller 8 to 12 ton capacity complete all as specified and directed.
M&L for PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in sub base on floors and incl foundation filling and mass concrete etc complete all as specified and directed.
M&L for 100 mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in floors finishes etc complete all as specified and directed.
M & L for forming contraction (dummy) joints 65mm deepx10mm wide, filled with with sealing compound of Grade ‘A’ complete all as specified and directed.
M & L for forming construction joints 30mm deepx10mm wide filled with sealing compound Grade ‘A’ complete all as specified and directed.
Complete removal of existing treatment and applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth complete all as specified and as directed.
SCHEDULE ‘A’ PART-II Taking down carefully unserviceable aluminium point wiring (light, fan, socket bell or power) complete, (fittings such as switches, ceiling rose lamp holder, regulators, sockets, pendants) stacking at site and keeping in safe custody for taking credit complete all as specified & directed .
Taking down ceiling fan any sweep, removing blades ,cleaning the fan completely for dust and dirt and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete all as specified & directed .
M&L for Concealed Point wiring using FRLS PVC insulated unsheathed multi strand copper conductor cable 1100 volt garde 1.5 sqmm including 1.5 Sqmm FRLS PVC insulated unsheathed multi strand copper conductor earth wire drawn in and including PVC conduit medium grade ISI marked not less than 20 mm dia concealed in wall & surface on ceiling with all conduit fittings etc incl testing and making good to disturbed surface to match existing surface for modular one light/fan/bell point incl suitable size pressed steel sunken box complete all as specified and directed. ( Note : Cover plate shall be measured & paid for seperately under respective items )
All As per Srl item N0 94 above but for one socket out let 5 Amp controlled by one switch on same board with other switch .
All As per Srl item N0 94 above for one socket out let 5 Amp controlled by one switch on independent board with other switch .
All as per item No 94 above but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15 Amp socket out let controlled by one 15 Amp switch on independat board.
All as per item No 94 above but point wiring with 6 sqmm FRLS multi stranded copper conductor cable for main circuit and 4 sqmm cable as earth continuity conductor for controlled by two pin and earth plug and socket complete all as specified and directed
S&F Single pole MCB with a two pin and earth plug and socket complete with one single pole MCB 20 amp 240V complete all as specified and directed
Supply and fix sheet metal enclosure double door for distributuion board factory made for MCB DB load link vertical TPN 4 way suitable for MCCB 100 amps , 4 pole as incomier ( when MCCB are to be used ) complete fixed flush in wall including cutting chasis in wall for fixing DB & making good to the disturbed surface to match with existing surface complete all as specified and directed. ( Note MCCB shall be measured & paid for seperately under respective item)
S&F of ceiling rose surface type 65mm x 50mm 2 to 3 terminal complete all as specified and directed
Supply and fixing of street light luminaires, sleek pressure cast aluminium housing, heat resistant glass, IP65 protection 25 watt fixed in repairs complete all as specified and directed. Make:- Havells Cat Part No : ENDURA SUNDOWN SL 25 W LED 765 PA SYBOPCIHD or equivalent make of all as specified in PS
S&F Led sleek surface round ceiling mounted decorative down light fitting with PC cover suitable for 1 x 15 watt complete all as specified and directed Make: Cat No of LDSVE -015-C-FC of Orient or equivalent make of all as specified in PS
S&F baton integrated LED channel of 9 W Mirror light 230 volts frequency 50 / 60 Hz integral sleek extruded polycarbonate LEd channel with white acrylic cover , Power factor not less than 0.90 complete all as specified and directed Make: Cat No of BCLSB 05 WH of bajaj or techno commercial or equivalent make of all as specified in PS
S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed
S & F Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified and directed
S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified and directed
S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified and directed
S & F Modular Fan step Regulator electronic, 120 watts 2 Module complete all as specified and directed
S & F Modular blanking plate 1 module complete all as specified and directed
S & F Modular white cover plate with frame 6 module complete all as specified and directed
S & F Modular white cover plate with base frame 3 module complete all as specified and directed
S & F Modular white cover plate with base frame 2 module complete all as specified and directed
S & F Modular white cover plate with base frame 8 module complete all as specified and directed
S & F Modular white cover plate with base frame 12 module complete all as specified and directed
S&F sheet metal enclosure distribution board SPN 8 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs complete all as specified and directed.
S&F MCB single pole 5 to 40 Amps 10 KA 240 volts "C" series complete all as specified and directed
S&F MCB SP 63 A 10 KA 240 volts "C" series complete all as specified and directed
S&F MCCB 100 Amps 4 pole 16 KA 415 volts series complete all as specified and directed
S&F bus bar chamber wall mounted 415 volts 3 phase 4 wire , 50Hz Ac supply fabricated from stainless steel 3 mm thick for outer cell TPN aluminium busbar of capcity 200 amps 4 pole 8 way complete all as specified and directed
M&L LED light fitting 1x9W bulk head luminaries IP 65 complete with all accessories including LED lamp 9 watt , connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V 50 Hz complete all as specified and directed Make: Orient Cat Part No L1BHP-10C-V1 or equivalent make as specified in PS
Supply and fixing swing type wall mounting fan 400 mm sweep single phase AC 230/240V complete for wall mounting incl grouting, holding down bolts, nuts, and provision of flexible copper conductor cable 3 core 23/0.0076 size from ceiling rose to fan complete all as specified and directed. Make per model No Airboll Hi-speed of Havells and equivalent
Supply & fixing heavy duty PVC Exhaust fan 300 mm sweep single phase AC 230/240V complete with louvers incl grouting, holding down bolts, nuts, and provision of flexible copper conductor cable 3 core 23/0.0076 size from ceiling rose to fan complete all as specified and directed.
S&F MCB SP 40 A 10 KA 240 volts "C" series complete all as specified and directed
Supply installation testing & commissioning of split AC 2.0 ton capacity , hot & cold , reversible cycle non CFC refrigent including cutting of wall / window & grouting of nuts bolts & frame of size 60 x 40 cm made out of angle iron frame of size 40 x 40 x 6 mm etc. for installation of AC , and making good to disturbed surface to match with existing surface complete all as specified and directed
Supply & fix voltage stablizer 5 KVA , input voltage range 90 volt to 280 volt & output voltage 220 volt to 230 volt AC + 2% variation of voltage complete all as specified and directed
M&L in replacement of sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sqmm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked minimum 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 sqmm as earth continuity conductor connected to common earth and earth dolly complete all as specified and directed
Material and labour for earthing with galvanised steel earth plate electrode 60cmX60cmX 6mm thick burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to earth wire 4 mm dia GI wire with mild steel nuts bolts checknuts & washers and connected to equipment as directed incl funnel with Gi medium grade watering pipe 20 mm bore , wire mesh , charcoal or coke and commn salt in alternate layers of 15 cm compacted thickness all around the earth electrode with concrete pit in PCC 1:3:6 type C-1 with 50 mm thick precast RCC cover in PCC 1:2:4 type B-1 cover slab reinforced with 8 mm dia deformed bars @ 15 cm c/c with suitable handle of 10 mm dia round bar , 15 mm bore medium grade pipe for earth lead protection incl necessary excavation and earth wok in soft / loose soil and disposal of spoil to a distance n exc 50 m and necessary testing complete all as shown in electrical plate No 3 of MES SSR Part-I complete all as specified and directed.
M/s Khajuria Construction Co.
BHARTI CONSTRUCTIONS
RAJINDRA ENGINEERS & CONTRACTORS
R.K. Works
Hare krishna engineering const.
SUNIL AND CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .