REPAIRS REPLACEMENT OF JOINERY WINDOWS DOORS VENTILATORS INCLUDING GLAZING GAUZING AND CONNECTED WORKS IN RCI RESIDENTIAL AREA AT RCI HYDERABAD

Amount

Taking down chowkhat or frames (without taking off shutters from the frames) not exceeding 1.5Sqm complete all as directed.

Taking down chowkhat or frames (without taking off shutters from the frames) exceeding 1.5Sqm but n.exc 4 Sqm complete all as directed.

Taking down shutters of any description from the frames exceeding 1Sqm but not exceeding 2Sqm complete all as directed.

M&L, making good under cills or over arches, lintels and bressummers including all pinning when necessary in cement mortar 1:4 finished to match with the existing work complete all as directed.

S&F, second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamferred put together with glue pinned at joints etc., complete all as specified and directed.

S&F, 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping complete all as specified and directed.

S&F, 35mm thick second class hardwood glazed and skeleton shutters with minimum three panels , open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze, etc., complete all as specified and directed. Note: Sizes of members of shutters as specified in SSR Part I

S&F, in repairs solid PVC door frame of size 50mm x 47mm made out of 5mm wooden grain design colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed.

S&F, Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as specified and directed.

S&F in repairs, 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F in repairs , 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F 100mm size medium wt Butt hinges, cold rolled mild steel, and fixed

S&F in repairs 150mm size Mild steel tee hinges, stove enamelled black, medium type, and fixed

M&L second class hard wood Plain fillets. square, rectangular or triangular in section, clean sawn, bull nosed ,splayed or chamfered or rounded one edge or face of sectional area exc 13 & not exc 25 sq cm secured with nails or brads complete as in old glzed doors / ventilatros ect location as per site condition including taking down existion old members all as specified and as directed.

M&L, preparing new or previously untreated wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

S&F in repairs, mild steel framed work such as grills, gratings etc., framed guard bars and similar works conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

S&F in repairs, mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

S&F in repairs, Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

M&L, preparing new or previously untreated steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surfaces complete all as specified and as directed.

S&F factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor including cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) .

Supply & Fix aluminium Powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing , fixing arrangements for frame etc complete all as specified and directed

Supply & Fix aluminium Powder coated (minimum thickness of powder coating 50 micron) sliding shutters for windows with one or more rebates including joining cleat, handles and suitable locking arrangements, epdm washer for fixing glass etc., for fixing complete all as specified and directed

S&F, aluminium powder coated of any colour ventilators, partly louvered and partly fixed type without sash bars including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, louvers , epdm washers for fixing glass etc., complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

M&L for Sheet glass 4.80 mm thick, ordinary quality tinted glass exc 0.5 sq. m in each pane all as specified and direcfted.

M&L for Sheet glass 3 mm thick, ordinary quality glzing with oil putty not exc 0.5 sq. m in each pane all as specified and direcfted.

M&L figured glass 3 mm thick pin head type and glazing with glazing clips n. exc 0.5 sqm in each pan complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls from any height including racking out joints, hacking for key, scrubbing down with water etc., including removal of rubbish material off the premises complete all as directed.

M&L, 15mm thick rendering in cement mortar 1:4, on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls surface and applying two coats of cement base paint over a coat of cement primer complte all as specified

M&L, preparing newly plastered surfaces of walls and ceilings applying two coats of oil bound distemper, white or tinted over coat of alkali resistant primer as per manufacturers instructions complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing rubbish off the premises complete all as specified and directed.

M&L, 7 to 8mm thick 300 x 300mm coloured, joint free Non skid ceramic tiles, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in CM 1:6 laying in floors complete all as specified and as directed.

M&L, coloured glazed ceramic tiles of size 450 x 300mm, 6 to 7mm thick in dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed. Note: Design of tiles shall be as approved by GE

S&F in repairs Mild steel, chromium plated curtain rod with fixing brackets, stops, rollers etc.complete all as specifed and directed.

S&F in repairs Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed aluminium ( die cast ) body complete all as specifed and directed.

SHILPA CONSTRUCTION COMPANY

M/S SARASWATHI CONSTRUCTIONS

Anjana corporation

Venkat Sai Enterprises

sanjar enterprises

Bismi Engineering

SRI SAI ENTERPRISES

M/S GDR CONSTRUCTIONS