PROVN OF CERTAIN SANCTIONED WORKS REVENUE WORKS ELECTRONIC METER AND STREET LIGHT AT MIL STN POKARAN

Amount

M & L in repairs, for flushing, pressurising the system, leakage testing vacuumisation and gas charging with refrigerant gas (R-134) at apprporiate pressure including testing at site of AC 7.5 TR capacity Package type AC complete all as specifide & directed by Engr-in -charge.

Dismantling unserviceable compressor reciprocating/scroll type of any make from package type Conditioner of cap 7.5 TR after cutting the copper tubing without any damage to existing parts, replacing the compressor with new compressor refixing of compressor on base with suitable capiliary tube, filters etc & jointing of copper refrigerant pipe line, with charging of suitable refrigerant gas to required level incl cleaning of condenser fins leakage testing etc incl testing & commissioning for smooth functioning complete all as specified & directed by Engr-in-Charge

M&L for removing the condenser fan/blower motor from Package type Air conditioner of 7.5 TR capacity with new motor and refixing of motor in original position with new washers nuts & bolts incl testing complete all as specified & directed by Engr-In- Charge

S&F in repair fully automatic star delta starter (EASD) type for compressor motor having inbuilt single phase preventor, no volt and under volt protection over load peotection. Reverse phasing protection of suitable capacity as recommended by manufacturer as per the load of the compressor motor all as specified and directed by Engr-in-charge.

S&F in repair, PCB circuit of existing size & shape to Package type AC having cap 7.5 TR complete all as specified & directed by Engr- In-Charge

Dismentalling of 2 HP pump motor of cooling tower and S &F new 2HP pump motor 3 phase complete with all as specified and as directed by Engr-in-charge

S&F single phase multifunctional astrnomical timer switch outdoor panel size 235x140x105mm with suitable copper wiring connection, micro controller with LCD display, 10 Amp contacts 20 gauge MS powder coated box weight 2.5 Kg etc complete with nuts, bolts, washer, clamp etc for fixing on existing panel or pole complete commencing to all as specified and as directed, Make - Universal or equivelent

Taking down carefully exsting meters single/three phase from inside the Panel box/wall from various locations of Mil Stn Pokaran, along with disconnecting complete all as specified and as directed by Engr-in-charge.

Supply and fix in repair, Tamper proof AC single phase, Electronic meter of class 1.0, 240V, 50 Hz, 10-60A conforming to IS-13779 and relevant IEC standards with inbuilt low power radio frequency (LPRF) communication facility in 865-867 MHz Cyan connode or equivalent mesh network with default and on demand display, billing data gereration facility, anti - tamper features, Microprocessor and LED/LCD based circuitry. The Contractor would mark the quarter no and bldg number on the meter after meter installation. The contractor would need to take sample approval from Engineer-in-charge. The sample approval would included demonstration of the data acquiaition via a DCU and software on trial basis. Make L&T/Secure/Siemens/HPL

Supply and fix in repairs, Tamper proof AC Three phase, four wire Electronic meter of class 1.0, 240V, 50 Hz, 10-60A conforming to IS-13779 and relevant IEC standards with inbuilt low power radio frequency (LPRF) communication facility in 865-867 MHz Cyan connode or equivalent mesh network with default and on demand display, billing data gereration facility, anti - tamper features, Microprocessor and LED/LCD based circuitry. The Contractor would mark the quarter no and bldg number on the meter after meter installation. The contractor would need to take sample approval from Engineer-in-charge. The sample approval would included demonstration of the data acquiaition via a DCU and software on trial basis. Make L&T/Secure/Siemens/HPL

Taking down old unserviceable existing street light any type such as fluorescent tube fitting/ HPSV/ HPMV fittings any wattage from the pole/ buildings, at any hight complete all as specified & directed by Engineer-in-charge.

Taking down old unserviceable existing motor 0.5/1.00 HP from high mast light pole box including necessary GI wire/rope for light and brackets and supply and fixing the 0.5/1.00 HP motor with existing fitting rope with brackets and lights connecting and commencing all as specified & directed by Engineer-in-charge

S & F in repairs, rectangular LED flood light fitting 1x150watt with innovative thermal management pressure die cast aluminium housing, heat resistant toughened glass with frame, duly prewired in built LED module IP 66 Protection complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of size 2.5 sq mm Make: Crompton Greaves Cat part No. LFLN-150-CDL/60 or Equivalent make of Havells/Philips.

S & F in repairs, LED street light fitting 1x45watt with pressure die cast aluminium housing, heat resistant toughened glass with frame, duly prewired in built LED module IP 66 Protection complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of size 1.5 sq mm Make: Crompton Greaves Cat part No. LSTS-45-CDL1 or Equivalent make of Havells/Philips.

S & F LED building Security light fitting 1x20watt with polycarbonate housing ,Aluminum gear tray duly prewired inbuilt LED module IP 65 Protection complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of size 1.5 sq mm including GI tubing 40mm dia light grade 1.5m long band to shape for mounting of security light with 2 nos MS,FI clamp including plinth with nut bolts etc complete all as specified and directed Make: Crompton Greaves/Havells/Philips.

S&F in repairs, galvanised iron bracket of light grade pipe 40mm bore length 1.20m bend to reqd shape with 2 Nos clamps made out of 40x6mm FI and suitable size of bolts nuts & washers etc complete for fixing street light fittings with PVC 20mm conduit for cable including clamps etc complete all as specified and directed. Note : The quoted rate shall also include one primer coat of Al. paint on FI clamps after preparation of surfaces incl removing old unsv bracket.

S & F PVC enclosure junction box assembly make syntex for controll arrangement of MCB including MCB SP 6 to 10 Amps including PVC aluminium two core cable 6 Sqmm suitable for street light connection & testing of street light mounting on existing pole/ wall with using of necessary clamps and assessories complete all as specified and dircted by Engineer-In-Charge.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable flat or circular size of aluminium conductor in 6 Sq.mm complete all as specified and dircted by Engineer-In-Charge.

Taking down old unserviceable LT cable, Supply and Laying LT cable in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with cable size aluminum lugs and testing. XLPE insulated, armoured heavy duty electric cables with aluminum conductor, 1100 volt grade, all as specified directed by Engineer In charge of cross sectional area and core of following sizes:-

(a) Size of cable 10 Sq.mm 2 Core

(b) Size of cable 16 Sq.mm 2 Core

(c) Size of cable 16 Sq.mm 4 Core

(d) Size of cable 50 Sq.mm 3 1/2 core

Supply, install & testing, factory made LT out door, front side openable single door compartmentmenalised, having locking arrangement, floor mounting dust & vermin proof cubical type of size 30x45x30cm mounted of flatron panel made out of 18 SWG MS sheet duly pointed internally & externally power coated over a coat of red oxide printer complete with following accessories :- (a) MCCB - 63 Amp along with extended terminal - 01 No. (b) MCB SPN- 40 Amp- 02 Nos (mounted in & including PVC enlosure), PVC insulated FRLS 1100 Volts grade single core, multistranded copper conductor cable of size 6 Sqmm connection for internal wiring duly crimped copper legs on ends. (c) Aluminium bus bar 200 Amps - 4 Nos.(d) Timer for street light automatic "ON" and "OFF" system.

M&L for prestressed cement concrete pole 9 metre long, 102mm x 172mm at top and 102mm x 279mm at bottom (or nearest higher size as approved by State Electricity Board), Class-10 conforming to IS-1678-1998, over and including marking alternate white and black strips 30 cm height (Total 5 Nos), with two coats of synthetic enamel paint over a coat of primer & Pole nos. complete all as specified & directed by Engineer-in-charge.

M&L for providing HT/LT over head lines on prestressed concrete poles with aluminium conductor steel reinforced (ACSR) including straining properly on insulator and binding with aluminium binding wire, connectors and jumpers etc complete all as specified & directed by Engineer-in-charge. (Mink, Dog, Lion, Weasel, Ferret or Squirrel). NOTE:- Measurement for the purpose of payment shall be made by measuring horizontal distance between centres of two adjacent poles and compounding the weight of conductors of that size and length and adding 3% extra for sag, joints, jumpers etc.

Supply and fix in repairs stay assembly complete comprising of MS galvanized stay plate 23cm x23cmx6mm , MS galvanised stay rod 16 mm dia with nut 215 cm long , MS galvanised stay bow 40cm long with 2 Nos galvanized thimbles with and including all fittings all as specified in SSR 1991 Part I. (Excavation , PCC for foundation, loop type insulator to be measured and paid seperately).

M&L for galvanised stay strand 7/2.24mm size complete all as specified & directed by engr-in-charge

M&L galvanised steel wire 4mm dia for continuous earth wire and for guarding & cardles incl binding as required with binding wire complete all as specified & directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level, top edge of the plate not less then 1.5M below nominal ground level connected to galvanised earth lead wire 4mm dia by means of bolts and cheek nut and washer of galvanised iron incl GI protection pipe and watering pipe all as shown in electrical plate No 5 of SSR Pt 1 including connection with O/H conductor on poles / main switch board / Panel / FPB all as specified or indicated incl testing on completion all as directed by Engr-in-Charge.

S&F in repairs, insulator, loop type, porcelain vitreous , white or brown with overall dimensions of 65 x 90 mm clearance of hole 16 mm complete all as specified

S&F in repair, pin type insulator, porcelain vitreous white brown or green incl one galvanised wild steel spindle, two galvanised iron washer and one galvanised iron nut 100 mm height 65mm dia for 1100 volt grade complete all as directed by Engr-in-Charge.

S&F in repair,of shackle type insulator porcelain vitreous white brown or green 90mm dia and 75mm height incl GI strip of 31x3mm size, 12mm dia insulator bolt washer & nut complete all as directed by Engr-in-Charge.

M&L cross arm , bracing support MS clamps etc including necessary fabrication, bolts, nuts, washers etc and painting with one coat of red oxide and two coats of aluminium paints complete all as specified & directed by engr-in-charge

M&L for PCC 1:4:8 type D-2 using 40mm grade stone aggregate in foundation of pole all as specified & directed by engr-in-charge

M&L for PCC 1:3:6 type C-2 using 40mm grade stone aggregate in foundation of stay all as specified & directed by engr-in-charge

M&L for PCC 1:3:6 type C-1 using 20mm grade stone aggregate for pole / stay assy incl necessary form work & finishing concrete surface even & smooth without using extra cement complete all as specified & directed by engr-in-charge

Excavation in trenches not exc 1.5m wide and n. exc 1.5M deep for fdn / trenches and getting out for soft / loose soil complete all as specified & directed by engr-in-charge

Removing excavated material any type n exc 50m and depositing at a level n.exc 1.5M above ground complete all as specified & directed by engr-in-charge

Returning/filling in layers, spreading leveling, watering and well ramming in layers n.exc 25m in sof/loose soil complete all as specified & directed by engr-in-charge

M&L for sand cushioning to PVC cable with tibba sand and punning to provide required cover complete all as specified & directed by engr-in-charge

Supply and laying Jodhpur stone patti for cable protection of lenth between 55 to 60 cm but width between 25 to 30 cm thicknes not less than 5 cm complete as per site requirement incl removing old unsv patti and direction of engineer in charge.

Supplying, laying & Jointing galvanised steel water tubings medium grade (ISI marked) laid in trenches with medium grade galvanised iron fitting (ISI marked) such as bends, tees, sockets, nipples & union, flanges etc and connecting complete of following bore of pipe:-

(a) 20 mm bore

(b) 25 mm bore

(c) 40 mm bore

(d) 50 mm bore

S&F in repair, Gun metal globe or gate valve, heavy duty SI -778 with iron wheel head, screwed both ends for iron pipe of following sizes :-

(a) 20 mm bore

(b) 25 mm bore

(c) 40 mm bore

(d) 50 mm bore

star electricals