NIT NO. 28 ITEM NO. 19

Dismantling of old panel, removing of all connections from panel to starter & Starter to motor. Remove old panel foundation with the help of electric hammer, tools , tackles & manual labor.

Supply / Fabrication of L T Panel Board cubical type, floor mounting, dust & vermin proof construction, of the minimum size 1800 X 1900 X 350 mm, suitable for indoor fixing, made out of 16 SWG CRCA sheet (frame of 14 SWG), having chambers suitable to switchgears to be fittedas belowwith provisions for cable entry from bottom. The panel should have separate cable alleys and bus bar alleys. It should be suitable for operation and maintenance from the front and having removable covers at the back and having doors complete with locks etc. at the front for each chamber. The rating of main bus bars has to be 300 Ampere for three phases and half for the neutral in Aluminium construction duly sleeved with phase indicating heat shrinkable Sleeves. It should be complete in all respect along with painted through powder coating process and all the switchgears as below duly fitted / installed properly as per requirement.

S/o Changeover, Switch, 300 Amp, 4 Pole,415V AC. Make: - L&T/ BCH/ Schneider / C&S

S/o Moulded Case Circuit Breaker (MCCB) of rating 300 Amp, Triple Pole, 415V, AC of breaking capacity of 36 KA or more. Make: - L&T/ BCH/ Schneider / C&S

S/o Moulded Case Circuit Breaker (MCCB) of rating 160 Amp, Triple Pole, 415V, AC of breaking capacity of 36 KA or more. Make: - L&T/ BCH/ Schneider / C&S

S/o Moulded Case Circuit Breaker (MCCB) of rating 63/60/32/30 Amp, Triple pole, 415 V, AC of breaking capacity of 36 KA or more. Make: - L&T/ BCH/ Schneider / C&S

S/o Single Phase Preventer Make: - L&T/ BCH/ Schneider / C&S

S/o Ampere Meter 300/5 Amp. Digital type. Make: - L&T / AE / Schneider

S/o Ampere Meter 200/5 Amp. Digital type. Make: - L&T / AE / Schneider

S/o Ampere Meter 60/5 Amp. Digital type. Make: - L&T / AE / Schneider

S/o Volt Meter Digital type. Make: - L&T / AE / Schneider

S/o Indicating Lamp, Led type Make: - L&T/ BCH/ Schneider / C&S

S/o Current Transformer 300/5 ampere. Make: - AE /Kuppa / Matrix

S/o Current Transformer 200/5 ampere. Make: - AE /Kuppa / Matrix

S/o Current Transformer 60/5 ampere. Make: - AE /Kuppa / Matrix

S/o MCB, 63 Amp, FP, ‘C’ Curve. Make: - L&T/ BCH/ Schneider / C&S

S/O Manually operated oil immersed sheet steel clad floor mounted type auto transformer starter as per IS: 13947(Part 1&4) with 1 No. under voltage release, 3 Nos. magnetic overload release with oil dashpot time lags 1 No. stop leaver, plain entries for PVC cables & auto transformer with 50%, 65% & 80% tapping, 415V, 3 phase, 50Hz without oil filling, Heavy duty with double contact & strip wound overload coil 40 HP Make: Advance / or any other make approved by DJB.

Supply of single core FR round PVC insulated industrial grade copper conductor (Unsheathed) flexible cables, 1100 volts, confirming to IS: 694 of 25 sq. mm size (Make: Grandlay /Gloster) DJB Approved

Supply of Transformer oil for starter Make – Savita / Power

4x50 sq. mm PVC insulated & PVC sheathed Aluminum armored conductor cable confirming to IS: 1554 (Part-i) complete as required. Make: Make: - Gloster, Grandlay, DJB approved

Loading, Unloading, Cartage and Transportation charges for the above Panel up to the site including charges of heavy labour etc.

Fabrication , supply & Fixing of base frame made out of Angle Iron of suitable size for fixing the above Panel and suitable for making outgoing /incoming cable entries in the panel. It should be duly painted and ready with provisions for installing at the site. Fixing of new base frame at the site with the help of fasteners / welding and grouting of nut bolts and including all other work as per site requirements and Fixing the new L T Panel at the newly fixed base frame by lifting the panel board and placing it at the base frame properly and fixing it to the frame by nut bolts as requirement.

Making the incoming connections to the Panel by connecting the existing cables after proper thimbling etc. including providing & fixing of cable glands of proper size.

Making the outgoing connections of starters by Connecting outgoing MCCBs / starters to their respective pumps etc. through the new cables as per site requirement after proper thimbling and tapping etc. including providing & fixing of material as required.

Testing and Commissioning of the Panel Board first at NO LOAD and then at ON LOAD and Operations as per the satisfaction of engineer in charge.

Agarwala Traders

ARIHANT ENGINEERS AND TRADERS

Premier Engineering Company

Avon Electricals

HYDROCON ENGINEERS

Raj Engineering Co.

M/s S.R. Enterprise

Gupta Brothers