REPAIR MAINT RECANNING TO ESSENTIAL ITEMS OF WOODEN FURNITURE UNDER GE EAST AGRA

Amount

REPAIR OF TABLE DRESSING GENTS (FD-230)

Repair of following parts of table dressing Gents as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :-

Removal of old U/S looking Glass and fixing new glass of 5mm thick as per existing shape and size.

Removal of old U/S back ply of glass and fixing 6mm thick Commercial plywood Make : Kitply/Green ply of existing shape & size

Removal of old U/S Pre-laminated particle board from top of table and fixing new 18mm th pre-laminated particle board Make : Kitply/Novapan as per existing shape & size.

Removal of old U/S parts of Drawer and fixing new parts of Drawer with 12 mm thick ply wood commercial Make : Kitply/Century/Green ply, Swastik with front 18mm pre-laminated particle board as per existing shape and size and bottom of drawer shall be of 6mm thick plywood commercial Make : Kitply/Century/Green ply, Swastik

(f) Polish: M&L for polishing of table dressing ladies with high class French polish conform to IS-348 Make : Gold Mohar/ Shalimaron all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

REPAIR TO TABLE WRITING (1145 X 600 X 760 MM) (FD-249/75)

Taking down of old U/S top and S&F new top made of 18mm thick pre-laminated particle board exterior grade ISI marked Make : Kitply/Novapan including 4 mm thick teak wood beading all rounds of the top as per existing shape and size all as specified and directed.

Taking down old U/S legs and S&F new legs of shisham wood as per existing shape and size all as specified and directed.

Taking down old U/S short rail/short stiffner and S&F new short rail/short stiffner as per existing shape and size all as specified and directed.

Taking down old U/S long rail/long stiffner and S&F new long rail/long stiffner as per existing shape and size all as specified and directed.

Taking down old U/S drawer and S&F new drawer out of shisham wood as per existing shape and size and bottom of drawer shall be 6mm thick plywood commercial Make : Kitply/Greenply including 25 mm approved brass knob, complete all as speciied and directed by Engr-in-Charge.

Taking down U/S cup board shutter and S&F new 18mm thick prelaminated particle board ISI marked Make : Kitply/Novapan exterior grade cup board shutter with 4mm thick teak wood beading on three sides of shutter and piano type hinges complete including 25mm dia approved brass knob, rest all as specified and directed by Engr-in-charge.

M&L for polishing with high class French polish over one coat of yellow ochre of the required table Make : Gold Mohar/Shalimar except bottom including preparation of old and new wooden surface manually by scratching and making smooth surfaces complete all as specified and directed.

BED PLY WOOD TOP (FD-246/247):- S&F in repair following parts of bed Ply wood top as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed.

Head rest shall be made as per drg

Foot Rest shall be made as per drg

Long rails shall be made of Ist class hard wood (Teak)

Short rails shall be made of Ist class hard wood (Teak)

Stiffener shall be made of Ist class hard wood (Teak)

MS bracket of flat iron 25x3mm,200mm long fixed with screw

Ply wood top 12mm thick BWR type Make : Kitply/Green ply as per existing shape and size in One piece

M&L for polishing of bed Plywood top with high class French polish conform to IS-348 Make : Gold Mohar/ Shalimarto all exposed surfaces except top & bottom after preparation of surfaces

REPAIR TO TABLE OFFICE OFFICER WOODEN (DB-4119):-

Taking down old U/S Top and S&F new top made out of 18mm thick pre-laminated partical board exterior grade ISI marked Make : Kitply/Novapan having one side teak face and balancing white including 4mm thick teak wood beading all rounds of the top as per existing shape & size all as specified and directed.

Taking down old U/S drawer and S&F new drawer made out of shisham as per existing shape & size and bottom of drawer shall be 6mm thick plywood commercial Make : Kitply/Green ply including 25mm approved brass knob, complete all as specified and directed by Engr-in-charge.

Taking down old U/S cupboard shutter and S&F new exterior grade having one side teak face and balancing white cupboard shutter with 4mm thick teak wood beading on three sides of shutter and piano type hinges complete including 25mm dia approved brass knob, rest all as specified and directed by Engr-in-charge.

M&L for polishing with high class french polish conform to IS-348 Make : Gold Mohar/ Shalimar over one coat of yellow ochre of the required table except bottom including preparation of old and new wooden surface manualy by scratening and making smooth surfaces complete all as specified and directed.

REPAIR TO CHAIR COMPUTER MAP & CHAIR WRITING MAP (FD/E6/MAP/01 & FD/6/MAP/12)

Removing of old tapestry cloth and S&F of new tapestry cloth with best quality costing not less than Rs 200/- blue in colour per RM as per approved sample including replacement of foam cushion Make : Sleepwell/Kurlon, jute etc tightening/replacement of the UNSUV hand rest of the chair with new material , removing of UNSV wheels, hydraulic system with new one including provn of 25mm thick foam on seat and back complete all as directed. Foam shall be 32mm density including tightening of loose members of chair all as directed

Removing of unserviceable wheels and S&F new wheels as per existing shape and size complete all as directed

Removing of unserviceable hydraulic system and S&F hydraulic system as approved by GE complete all as specified and directed

Removing of unserviceable base and S&F base as approved by GE complete all a sspecified and directed

Removing of all dust,rust etc and M&L for painting with one coat of enamel paint(spray painitng)complete make :Asain/Berger all as specified and directed

SOFA SET 5 PIECES (TWO WITH ARMS & THREE WTHOUT ARMS) (FD-18 (M)

Taking out old u/s broken wooden plank seat frame of sofa set without arm and S&F new plank of Ist class hard wood (shisham) of approximate size 27"x5”x0.5”complete all as specified and directed

All as per item No 6.01 above but back frame of approx size 23”x6.5"x0.75”

Taking out old u/s broken legs of sofa set with /without arms and S&F new legs of Ist class hard wood (shisham) duly planned and smooth as per existing shape & size incl polishing with high class French polish complete all as specified and directed.

M&L for repair to sofa set seat and back with arms by opening seat and back complete including supply and replacement of cotton pudding hassion cloth tapestry cloth unserviceable spring by new one 25mm thick foam of 40/32 density Make : Sleepwell/Dunlop before tapestry cloth and tightening of all loose joints etc complete all as specified and directed

All as per item No 6.04 above but sofa set seat and back without arms

Taking out old u/s broken wooden plank of seat frame of sofa set with arms and S&F new plank of 1st class hard wood (shisham) of size 27”x2”x1” duly planned and smooth complete all as specified and directed.

All as per item No 6.06 above but for back plank.

Supply only wire spring 16 gauge complete all as specified & directed

REPAIR TO ALMIRAH LARGE (DB-4116 & FD 21)

Taking down old U/S shutter of almirah large wooden and S&F new shutter of 18mm thick pre-laminted particle board ISI marked Make : Kitply/Novapan exterior grade as per existing shape & size including 4mm thick teak wooden beading on three side of shutter all as specified and directed.

Taking down old U/S back & S&F new back of 12m thick plywood commercial Make : Kitply/Green ply with required size of screws all as specified and directed.

Taking down old U/S legs and S&F new legs of 1st class hard wood teak as per existing shape and size all as specified and shown in drg.

Removing of old U/S shelves and S&F new shelves of 1st class hard wood shisham as per existing shape and size all as specified and directed.

Removing of old U/S hasp and staple and S&F new hasp and staple 75mm chromium plated with required size of screws all as specified and directed.

Supply only piano type hinges for shutter of almirah medium wooden complete all as specified and directed.

Removing old U/S handle and S&F new handle 100mm long chromium plated fixed with required size screw complete all as specified and directed.

M&L for polishing with two coats of French polish conform to IS-348 Make : Gold Mohar/ Shalimar to all exposed wooden surface internally and externally complete all as specified and directed.

REPAIR TO TABLE 900 X 600 X 760mm WITH DRAWER/WITHOUT DRAWER (FD-88/299 & 224/283/231/284)

Taking down of old U/S top and S&F new top made of 18mm thick pre-laminated particle board exterior grade ISI marked Make : Kitply/Novapan having one side teak face and balancing white including 4 mm thick Ist class teak wood beading all rounds of the top as per existing shape and size complete all as specified and directed.

Taking down old U/S leg and S&F new leg of Ist class shisham wood as per existing shape and size complete all as specified and directed.

Taking down old U/S long rail & S&F new long rail of Ist class shisham wood as per existing shape and size complete all as specified and directed.

Taking down old U/S short rail & S&F new short rail of Ist class shisham wood as per existing shape and size complete all as specified and directed.

Taking down old U/S stiffner and S&F new stiffner of Ist class shisham wood as per existing shape and size complete all as specified and directed.

Taking down old U/S drawer and S&F new drawer out of Ist class shisham wood as per existing shape and size and bottom of drawer shall be 6mm thick plywood commercial BWR quality Make : Kitply/Green ply including 40mm approved brass knob, complete all as specified and directed.

M&L for polishing with high class French polish conform to IS-348 Make : Gold Mohar/ Shalimar over one coat of yellow ochre of the table except bottom including preparation of old and new wooden surface manually by scratching and making smooth surfaces complete all as specified and directed.

REPAIR OF TEAPOY (FD-232/ 278/382):- S&F in repair of the following parts of teapoy with Ist class hard wood (Shisam) as per existing shape and size duly planned shown on drawing complete all as specified and directed:-

long rail

short rail

side stiffener

Centre stiffener

Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade Make : Kitply/Novapan with incl 6mm thick teakwood beading all round the top complete all as specified and directed

M&L for polishing of teapoy with high class French polish conform to IS-348 Make : Gold Mohar/ Shalimar on all exposed surface except top & bottom incl after preparation of surface complete all as specified and directed.

CHAIR DINING (FD-16(M)/203/279):-S&F in repair following part of chair dining of 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed;-

Rear Legs

Front Legs

Side rail of seat frame including drilling holes for weaving (spacing of holes shall be as existing)

Front/back rails of seat frame including drilling holes for weaving (spacing of holes shall be as existing)

Bottom stiffener

Back stiffener

M&L for polishing of chair dining with high class French polish conform to IS-348 Make : Gold Mohar/ Shalimar to all exposed surfaces except inside of seat frame ( 4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR EASY (FD-17(M)/201/229):- S&F in repairs following parts of the chair easy with 1st class hard wood (Teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed ;-

Rear Legs

Front Legs

Side Rails

Front/Back Rails

Back Stiffener

Bottom Stiffener

Arms rest

M&L for polishing of chair easy with high class French polish conform to IS-348 Make : Gold Mohar/ Shalimar to all exposed surfaces except in side of seat frame(04 sides) incl matching with new components with old one after preparation complete all as specified and directed.

REPAIR OF TABLE BED SIDE (FD-248 /276):- S&F in repair of the following parts of Table Bed Side with 18mm th pre-laminated particle board Make : Kitply/Novapan as per existing shape and size duly planned and wrought finished as shown on drawing complete all as specified and directed:-

Shelf

Bottom

Back shall be made of 6mm thick ply wood commercial Make : Kitply/Century/ Green ply, Swastik as per existing shape and size and as shown in drgs and directed

Ist class hard wood (teak) 6mm thick beading at front on 18 th pre-laminated particle exposed portion of table bed side

M&L for polish of side board with high class french polish conform to IS-348 Make : Gold Mohar/ Shalimar on all exposed top and bottom incl after preperation of surfaces complete all as specified and directed

REPAIR TO TABLE DINING 06/08 PERSON (FD-239/269 /273):- S&F in repair of following parts of table dining 06/08 pers with 1st class hard wood (Shisam) as per existing shape and size duly plannned as shown on drg complete all as specified and directed.

Taking down old U/S top of table dining 06/08 pers and S&F new top of 18 mm thick pre-laminated particle board one side teak face and other side white balancing exterior grade Make : Kitply/Novapan with incl 6 mm thick teak wood beading all round the top duly high class french polish complete all as specified and directed.

Long rail

Short rail

Stiffener

M&L for polishing with high class french polish conform to IS-348 Make : Gold Mohar/ Shalimar on all exposed surfaces except top & bottom complete all as specified and directed.

CHAIR WRITING (FD-20(M)/202/280):- S&F in repair following part of chair writing with 1st class hard wood (teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed.

Rear legs

Front Legs

Side rail of seat frame including drilling holes for weaving (spacing of holes shall be as existing)

Front/Back rails of seat frame including drilling holes for weaving (spacing of holes shall be as existing)

Bottom stiffener

Back stiffener

Arm rest

M&L for polishing of chair writing with high class French polish conform to IS-348 Make : Gold Mohar/ Shalimar to all exposed surfaces except inside of seat frame (4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

REPAIR OF PEG TABLE (FD-236/266 /277/384):- S&F in repair of the following parts of Table Peg with Ist class hard wood (Shisam) as per existing shape and size duly planned as shown on drawing complete all as specified and directed.

Long rail

Short rail

Side stiffener

Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade Make : Kitply/Novapan with incl 6mm thick Ist class hard wood (teak) beading all round the top complete all as specified and directed

M&L for polishing of table Peg with high class French polish conform to IS-348 Make : Gold Mohar/ Shalimar on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

REPAIR OF TABLE DRESSING LADIES (FD-32 (M)/ 251/231):- Repair of following parts of table dressing ladies as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :-

Removal old U/S looking Glass and fixing new glass of 5mm thick as per existing shape and size.

Removal old U/S back ply of glass and fixing 6mm thick Commercial plywood Make : Kitply/Green ply of existing shape & size

Removal of old U/S sliding glass and fixing new glass of 3mm thick as per existing shape & size.

Removal of old U/S Pre-laminated particle board top of table and fixing new 18mm th pre-laminated particle board Make : Kitply/Novapan as per existing shape & size.

Removal of old U/S leg of table and fixing new legs of 1st class hard wood (Shisam)

Removal of old U/S Drawer and fixing new Drawer of 12 mm thick ply wood commercial Make : Kitply/Century/Green ply, Swastik with front 18mm pre-laminated particle board as per existing shape and size and bottom of drawer shall be of 6mm thick plywood commercial Make : Kitply/Green ply

M&L for polishing of table dressing ladies with high class French polish conform to IS-348 Make : Gold Mohar/ Shalimaron all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

SOFA SET 5 SEATER (FD-281/373):- S&F in repairs following parts of sofa set 3 pieces 5 seats with Ist class hard wood (teak) as per existing shape and size duly planned and finished complete all as specified and directed.

SOFA SEAT OF LONG PIECE

Front rail

Side rail

Batten

Stiffener

SOFA BACK OF LONG PIECE

Side rail

Front rail

Bottom rail

Batten

Stiffener

SOFA SEAT OF CHAIR SET

Front rail

Side rail

Batten

Stiffener

SOFA BACK OF CHAIR SET

Side rail

Top Rail

Bottom rail

Batten

M&L for polishing of sofa set 5 seater (3 Pcs) with high class lekar polish to all exposed surfaces match with existing all as specified and directed.

REPAIR TO TABLE CENTRE (FD-235/274):- S&F in repair of the following parts of table centre with Ist class wood (Shisam)As per existing shape and size duly planned as shown on drawing completed all as specified and directed;-

long rail

short rail

side stiffener

Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade Make : Kitply/Novapan with incl 6mm thick wood beading all round the top complete all as specified and directed

M&L for polishing of Table Centre with high class French polish conform to IS-348 Make : Gold Mohar/ Shalimar on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

CHAIR WITH CUSHION

Taking down old UNSV cushion of chairs and S&F new 100mm thick cushion (cool foam) of 40 density duly upholisted/covered with high quality tapestry cloths (cost not less than Rs 400 per RM as per approved sample for seat of chairs as per required size complete all as specified and directed. Foam Make : Sleepwell/Dunlop

Repair to Chair dining/Chair dining high back at Cesil Manson

Removing of old tapastray cloth and S&F of new tapastry cloth with best quality costing not less than Rs. 600/- per RM as per approved sample including replacement of Foam cushion , Jute newar, cotton dori with new material including provn of 25mm thick foam on seat complete all as directed. Foam shall be of 40 density. Foam Make : Sleepwell/Dunlop

-ditto- all as per item No 20.01 but as in back.

REPAIR TO CHAIR DINING W/O ARMS

-ditto- All as per item No. 20.01 above but chair dining w/o arms

-ditto- all as per item No 21.01but as in back.

RE-CANNING OF CHAIRS :-

Taking out old u/s cane from chairs etc and re-canning of Dining Chair, Writing Chair , Easy Chairs, Dressing stools,Bin solied linen, Chair varandha, Couch with Two Easy Chair etc with new 2 mm wide half round Godrej pattern white plastic cane and border shall be woven with new 4 mm half round plastic cane of superior quality Make : Ajay/Sah/complete all as specified and directed. (Drg No FD-228,229, 279,280,252,244).

S&F of Corners made of 1st class teakwood for wooden furniture of required shape and size as per approved samples by GE/Engineer-in-Charge (Drg No (FD-249/75), 281/373, 246/ 247, 56(M)/ 285,16(M)/ 203 /279,277,384,235/274)

CHAIR DINING WITH CUSHION

Taking down old U/S front legs and S&F new front legs of dining chair of seasoned 1st class hard teak wood as per existing shape and size complete as specified and direced

Taking down old U/S rear legs and S&F new rear legs of dining chair of seasoned 1st class hard teak wood as per existing shape and size complete as specified and direced

Taking down unserviceable seat frame rail and S&F new seat frame rail of dining chair of seasoned 1st class hard teak wood as per esixting shape complete as specified and directed.

Taking down unserviceable foam and S&F new 75mm thick 40 density foam duly upholstered covered with rexine of superior quality rate not less than Rs 200.00 per meter as per existing shape and size complete as specified and directed

Preperation of the exposed portion new and old parts of chair dining by scratching old surfaces manually and making wooden surfaces smooth and polishing with one coat of French Polish conform to IS-348 Make : Gold Mohar/ Shalimar over a coat of yellow achrs including preparation of wooden surfaces for the complete as specified and directed

REPAIR TO EXECTIVE CHAIRS

Removing of old leatherite baniyan foam/rexin and S&F of new leatherite foam/rexin with best quality as per approved sample including replacement of foam cushion and S&F of 75mm thick foam on seat complete all as directed. Foam shall be of 40/32 density.Foam Make : Sleepwell/Curlain/Kurlon

Removing of old UNSV caster wheels of leg and S&F of new caster wheel of leg with best quality as per approved sample all as specified and directed.

M & L polishing to TP spl items of wooden furniture articles on internal & external surface with two coat of high class malamine polish (Spray polishing)make : Asian/Shalimar after removing of dust including preparation of wooden surface complete as specified and directed for the following Cecil Manson furniture complete as specified and dirceted for the following:-

Double bed hard top high back attached with side table (TP)

Table dressing ladies (TP)

TV Cabinate (TP)

TV Unit/Cabinate (TP)

Sofa set 3 Pcs , 5 seated (TP)

Table Centre (TP)

Corners (TP)

Console ie rectangular tables with mirror (corner) (TP)

Table dressing chest drawer w/mirror (TP)

Table dining 6 person with 6 chair (TP)

Sofa set (Single seater) (TP)

Sofa set 3 pcs - 04 seater (TP)

Table Reading (TP)

Peg Table (TP)

Table dining 08 seaters (TP)

Table dining 12 seaters (TP)

Chair dining high back (TP)

Chair dining arms w/o arms (TP)

Chair with cushion (TP)

Chair dining (TP)

Corner consolen table (Rectangular) (TP)

Peg table round (TP)

GIRENDRA SINGH AND CO

Anand Construction