SPL REPAIR OF 05 X TOILET IN BLDG NO 643 (SINGLE JCOS LIVING) OF 8 GRENADIERS AND PROVN OF PARKING SHED FOR 10 X ALS AT MT AREA OF 16 DOGRA AT ITARANA CANTT ALWAR

Amount

Taking up or down 15mm steel tubing and connections, including cleaning for re-fixing or removal to store

Taking up or down 20mm steel tubing and connections, including cleaning for re-fixing or removal to store

Taking up or down 25mm steel tubing and connections, including cleaning for re-fixing or removal to store

S&F steel tubing medium grade 15mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F steel tubing medium grade 20mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F steel tubing medium grade 25mm bore with all fittings fixed complete to wall and or laid in floor all as specified.

S&F in repair rotational moulded polyethylene water storage tanks (white colour) (cylindrical vertical with closed top) of capacity 500 Ltrs hoisted and fixed in position incl all necessary fittings (nipple, socket, union etc) complete all as specified in SSR Part I and removing to store, complete all as specified and directed.

S&F in repairs 15mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe, minimum weight - 210 gms ball valves any type all as directed.

S&F in repairs 20mm dia brass Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 25mm dia brass Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs vitreous china squatting pan, Orissa pattern, size 580mm x 440mm white with integral foot rests connection to trap and to flushing pipe, etc. complete including making good to floor complete all as specified & directed

S&F in repairs vitreous china wash basin white of size 450mmx300mm (ISI marked) flat back or angle back type excluding taps, waste chain & plug but incuding cast iron brackets, CP waste coupling and PVC waste pipe and cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity (white ISI marked) with inlet ball valve, float and handle, syphonic action type including brackets and flush pipe of poly ethylene of low or high density of PVC 32mm dia for LLFC complete all as specified.

S&F in repairs PVC connection of 15mm bore with 2 Nos. PTMT nuts, 600mm long fixed with adapter and washers at both the ends complete all as specified and as directed

S&F in repair towel rails of 20mm dia tubular brass chromium plated 60cm long 'D' type fixed to all as directed

S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) fixed with cement complete all as specified and directed

S&F in repairs 15mm bore swan neck pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified and as directed.

S&F in repairs 15mm bore, brass chromium plated wall mixer, 3 in 1 with arrangements for telephonic shower and overhead shower with 220 mm maximum long bend complete all as specified and as directed. Make : Cera / Jaquar

S&F in repairs 15mm bore brass chromium plated shower rose 65mm size with swivel joint type including fixing to steel pipe or union complete all as specified.

S&F in repair 15mm bore long body, fancy type, chromium plated bib tap cast copper alloy with crutch or butter fly handle complete all as specified

S&F in repairs 15mm bore stop valve, fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in repairs 15mm bore Stop valve/angle valves, fancy type chromium plated cast copper alloy screwed down high presure, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors / walls complete all as specified & directed

S&F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified & directed

S&F PVC (SWR) bends any radius 110 mm bore complete all as specified & directed

S&F PVC (SWR) bends any radius 75 mm bore complete all as specified & directed

S&F PVC (SWR) vent cowl 110mm complete all as specified & directed

S&F in repair 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified & directed

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified & directed

S&F PVC (SWR), 110mm junction single, (Single T) equal or unequal complete all as specified & directed

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key, scrubbing down with water etc all as directed.

M&L rendering 10mm thick in CM (1:6) on fair faces of brick/stone masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L rendering 15mm thick in CM (1:4) on brick/stone wall surfaces or other than fair faces of brick work & surfaces, finished even and smooth without using extra cement with water proof compound. Note :- Water proofing compound shall be measured and paid separately here-in-after.

M&L rendering 5mm thick in CM (1:3) on concrete surfaces in ceiling, soffits and the likes; finished even & smooth without using extra cement complete all as specified.

Preparing newly pastered surfaces of wall & applying three coats of white wash complete all as specified.

Preparing newly plastered surfaces of walls & applying two coats of cement base paint of approved shade/tint complete all as specified and directed.

Preparing newly pastered surfaces & applying three coats of white wash on ceiling, soffits and the likes; all as specified.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L 25 thick PCC (1:2:4), Type B-0 (using 12.50mm graded crushed stone aggregate) as in floors sub base complete all as specified and as directed.

M&L Non Skid Coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over with and including 15mm thick screed bed in CM (1:6) complete all as specified.

M&L 75mm thick PCC(1:3:6), Type C1 (using 20mm graded stone aggregate ) as in plinth protection finished fair and even complete all as specified & directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off premises all as specified and as directed.

M&L Glazed ceramic coloured tiles in vertical surface 450mmX 300mmX 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles and laid over with and including 10 mm thick rendering in CM (1:4) complete all as specified & directed.

M&L PCC (1:2:4), Type B-1 (using 20 mm graded stone aggregate) set in cement mortar (1:6) as in coping of brick masonry wall kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintol blocks, anchorage blocks, bonders (for stone walling) corbels, brackets, etc. including weathering slightly rounded or chamfered angles and throating as directed with and including necessary formwork complete all as specified & directed.

S&F stairs (framed) including stringers, treads, landing, balusters, hand rails etc including cleats, brackets, etc to conform to IS 116-1979 (medium grade) complete all as specified & directed

S&F roof trusses (framed), trussed, purlins, cranes gantries, ril and fastening and heavy bracket framing (Beam, tee, angle, channel or flat section) Fe 410-W (Gde-E250) quality 'A' including distance pieces, cleats, brackets etc complete all as specified & directed

M&L Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 W (Gde E-250) Quality B ,complete all as specified & directed

M&L rolled sections as in main and cross beam , hip and jack rafers purlins where connected rafters and running rails and guides for sliding doors; fixed with angle cleats other connecting plates complete all as specified and directed.

S&F mild steel screw bolts (Machine made) with hexagonal or square heads at one end and the screwed the other to be fitted with washers and one hexagonal or square but exc 22.5 but n.exc 30 cm long, dia of shank 11 to15 mm complete all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed

M&L PCC (1:4:8), Type D-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified & directed

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified & directed

M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L walling of random rubble, uncoursed, well bonded, bedded and solidly hearted stone masonry built in CM (1:4) complete all as specified & as directed.

M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and directed.

Taking down Chowkats or frames with shutters ( without taking off shutters from the frame) n.exc. 1.5 Sqm each & removing to store complete all as specified and as directed.

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

M&L Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified & directed

S&F Butt hinges 100mm long medium weight, colled rolled mild steel complete all as specified& directed

S&F 150mm anodised aluminium barrel tower bolts of extruded section and fixed complete all as specified & directed

S&F 150mm anodised aluminium handles, 'D' type, cast type complete all as specified & directed

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

S&F steel ventilator with top hung shutter including hinges steel peg stay complete including taking down complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or GI wire staples or nails and screws complete all as specified.

S&F factory made steel windows with side hung shutters including projecting type box hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of Zinc chromate primer.

S&F factory made steel windows with side hung shutters including projecting type box hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded including one shop coat of Zinc chromate primer.

S&F 3.00 mm thick sheet glass ordinary quality in squares n.exc. 0.5 Sqm each pane complete all as specified and directed

S&F MS frame work such as grills, gratings, angle frame etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stands and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

S&F flat iron as in hold fasts, hooks, cleats welded to angle iron door/window frames etc complete all all as specified and directed.

Demolition mud in roofs, any thickness, including plastering, existing treatment and cleaning (whether full thickness removed or only part thereof) etc in all respect and preparing it for further treatment and taking out and disposal of debris & rubbish to a distance exc 1 Km but not exc 1.5 Km complete all as specified & directed

M&L PCC (1:2:4), Type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified & directed

M&L screed laid 15mm thick in CM (1:4) with water proofing compound over green concrete surface, finished even and smooth (without using extra lime or cement) complete all as specified & directed Note : Water proofing compound shall be measured and paid separately here-in-after.

M&L Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per Sqm including cleaning surfaces over bituminious primer complete all as specified & directed

M&L APP based polymeric membrane minimum weighing 3.5 Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by torch on application method complete all as specified and directed.

Supply only Integral water proofing compound

M&L 75 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base of floors, pavings, pathways etc complete all as specified & directed

M&L 100 mm thick PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base of floors, pavings, pathways etc complete all as specified & directed

M&L 100 mm thick PCC 1:2:4, type B-2 (using 40 mm graded stone aggregate) as in floors, pavings, pathways etc complete all as specified & directed

M&L 60mm thick machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 , M-35 Grade and laid over with and including 25mm thick sand cushion complete all as specified and as directed

M&L 80mm thick machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 , M-40 Grade and laid over with and including 25mm thick sand cushion complete all as specified and as directed

M&L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), with and including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm) with and including making drainage opening wherever required complete all as specified and as directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) for 150 mm dia bore drain pipe for bed concrete including packing under and hunching against the sides of pipe after they are laid and tested complete all as specified and directed

M&L 150 mm reinforced cement concrete pipes, class NP-2, laid and jointed in CM (1:1) with collars with and including taking out old UNSV pipe complete all as specified and directed

Excavation in trenches n.exc. 1.5 Mtr wide and n.exc. 1.5 Mtr in depth for foundation and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc. 1.5 Mtr wide and exc. 1.5 Mtr but n.exc 3.9 Mtr in depth for foundation and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material, n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and directed.

S&F 32mm bore PVC waste pipe of suitable length for WHB complete all as specified & directed.

S&F soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified & directed.

Cutting holes in stone/brick walls exc half brick but n.exc one brick wall built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete (1:2:4), Type B-1 complete all as specified and directed.

Demolition of reinforcement cement Concrete of any description and in any position (reinforcement cut as required to facilitte demolition) complete all as specified and as directed.

M&L precast RCC (1:2:4), Type B1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for manholes, drains etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including placing in position and set in CM (1:6) complete all as specified & directed. Note :- Reinforcement shall be measured and paid separately under relevant item

M&L reinforcement TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.

M&L reinforcement TMT bars 5mm to 10 mm dia as in stirrups, spacers, binders etc complete all as specified.

Form work to side of concrete foundation, footing , bases of columns, raft and raft beams, sides and soffits (If any) of foundation and plinth beams and similar work, vertical or to batter complete all as specified and directed

Form work to side of concrete pillars, posts, struts, pier columns etc complete all as specified and directed

Form work to sidesand soffits of floor or roof beam, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed

M&L hardcore of Broken stone/boulders gauge n.exc. 63mm, deposited, spread & levelled in layers n.exc. 15 cm thick, watered & rammed to a true surface complete all as specified & directed.

Preparation of kerb stone, new untreated concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified & directed.

Forming construction joint 30mm deep x 10mm wide filled with sealing compound, Grade 'A' complete all as specified and directed.

reatment for sunken portion is as follows:- M&L for water proofing treatment in sunken floors as described hereunder:- 1) Demelotion of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. 2) PCC (1:2:4) type B0, covered filling in sunken portion 75mm thickness shall be provided at the junctions of RCC slab and adjoining walls. 3) Sunken floor and sides upto finished floor level shall be plastered with 15mm thick plaster in CM 1:4 wixed with WPC@ 3% by weight of cement. 4) Applying bitumen primer of sunken floor & side surfaces TANKMASTIC of M/s STP Ltd @ 0.40 ltr/Sqm. 5) Sunken portion shall be filled with lean concrete (1:5:10), Type E-2 using 40mm aggregate after carring out of satisfactory testing of CIpipes/Joints & Slab/walls by filling water 72 hrs. The sunken portion of Nahani trap/floor trap and pipes, joints shall be emmbeded in PCC (1:3:6) blocks 6) GI Spout pipe 32mm dia and 450mm long cross cutted ends shall be inserted at the time of repair to Sunken portion as directed. Note:- i) In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. This process of grouting and testing shall be repeated till leakage/seapage/dampness is elimaneted ii) Horizontal flat area only measured. iii) Above aspets are deemed to be included in quoted rate.

M&L RCC, M-25 Design Mix (using 20mm graded crushed stone aggregate) as in foundation including , raft, plinth beam bases for column etc basement slabs under reamed piles and mass concrete complete all as specified and directed

M&L RCC, M-25 Design Mix (using 20mm graded crushed stone aggregate) as in columns, pillars, pier post and struts etc complete all as specified and directed

M&L RCC, M-25 Design Mix (using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressumers, lintel over 1.5 mtr span etc complete all as specified and directed

Taking down carefully copper/Aluminium point wiring for light/fan/socket/light fitting/power point and taking down of teak wood batten / PVC casing caping/PVC conduit/steel conduit and making good disturbed surfaces of walls/ceilings /floors etc with and including dismantling of fittings complete all as specified and directed.

M&L point wiring complete with 1.5 Sqmm single core multistranded copper conductor fire resistant low smoke (FRLS) PVC insulated and unsheathed cable 1100 Volts grade confirming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20 mm external dia) but shall be increased as per actual site requirement in accordance with clause No. 19.125 of SSR Part-I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling including 1.5 mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakellite white/coloured top sheet cover 3.0 mm thick for one light point controlled by one way switch all as specified & directed.

All as per serial item No. 109.00 here-in-before but for one one fan point controlled by one switch and regulator.

All as per serial item No. 109.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board.

All as per serial item No. 109.00 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No. 109.00 here-in-before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour.

S&F switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts.

S&F switch piano, flush type, single pole, one way, 15 Amp, 230 Volts.

S&F socket outlet, 3 pin (with 2 pin outlet also), 5/6 Amp, flush type, 240 Volts.

S&F socket outlet, 2 in 1, 3 pin, 5 and 15 Amp, flush type, 240 Volts.

S&F ceiling rose surface bakelite 65mmx50mm with two or three terminal complete all as specified.

S&F decorative ultra slim liner LED lighting fixture with extended poly carbonate environmental friendly, energy efficient suitable for 20W with LED tube of model E-LITE LED pride and connecting up, complete all as specified and directed.Make : Havells cat part No. LHEXBHP71N1W018 or equivalent of philips/Crompton Greaves/ bajaj/Wipro/GE

S&F LED type street-DRACO SERIES light luminaire 25 watt 230 V 50 Hz including all necessary fitting accessories and LED complete all as directed. Make: C&S Cat Part no. LTESS20WLED or equvalent Crompton Greaves /Wipro

S&F lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified.

S&F LED Bulb energy saving 10/11 W complete all as specified and directed Make :- Havells/Crompton/Syska

S&F Sheet metal enclousure double door type ,suitable for fixing TPN with 200 Amps rated bus bar ,vertical DB 4 way TPN 415 Volts complete

S&F sheet metal enclosures double door type suitable for fixing MCB's, SPN with 200 Amps rated bus bar,8 way, 240 Volts.

S&F MCB 63 Amp, three pole & neutral, 415 Volt complete all as pecified & directed.

S&F MCB 32/40 Amp, single pole & neutral,240 Volt complete all as pecified & directed.

S&F MCB 6-40 Amp, single pole 240 Volt complete all as pecified & directed.

Supply, laying, jointing and testing XLPE insulated armoured heavy duty LT under ground electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 25 Sqmm 4 core laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified & directed. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid separately under relevant items.

S&F sub main wiring on and including passing through PVC conduit pipe 1100 Volts grade with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm and continuous earth with PVC flexible cable copper conductor unsheathed multistranded single core of size 6 sqmm of green colour confirming to IS 694/1990 with and including taking down existing unserviceable sub main wiring. (Note: Two runs of cable with one run of earth wire and one run of PVC Coundit should measured as one length)

M&L 40mm dia GI pipe, Light grade for protection of LT cable fixed to walls/ poles/road crossing including clamps complete all as specified and directed.

S&F 25mm bore GI water tubing IS-1239 marked, medium grade, in replacement including all necessary pipe fittings laid in trenches, on wall, under floor, under road on same or new route and making good the disturbed portion to match with the existing with and including taking down of old unserviciable pipe complete all as specified and directed. Note :-Excavation and earth work will be measured and paid separately under relevant items.

S&F in repair 25mm bore gun metal gate valve with iron wheel head, screwed both ends for jointing iron pipes, non rising, forged brass spindle class-1, ISI marked complete all as specified and directed.

S&F electric water heater,storage type steel body with copperinner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Starrated complete all as specified and as directed

S&F exhaust fan AC single phase 230/240 Volts of size 300 mm sweep with louver with and including cutting holes in brick/stone wall of required size carefully and making good the disturbed surfaces to match with the existing in CM (1:3) complete all as specified and directed.

S&F ceiling fan complete with electronic type regulator and accessories 230v, 1200mm sweep BEE 5 star rated complete all as specified and as directed.

M&L earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 3.00 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & directed.

M&L brick work with FLY ASH BRICKS(As Per IS-13757(1993) burnt clay fly ash building bricks), (OLD SIZE BRICKS) with width equal to the length of the brick laid dry & flat abutted with each other with gap between adjacent bricks not exc 10 mm over UG cable for protection and complete all as specified & directed.

M&L dry sand and punning for cushioning to under ground cable all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

S&F 2nd class hard wood rectangular block open recessed of size 30cm x 25cm x 5 cm depth with 3 mm thick phenolic laminated sheet top cover fixed with suitable steel screws & PVC rawl plug ( 4 Nos) for DB complete all as specified and directed.

M&L LED flood light 70 Watt, 230 VAC outdoor type with thermal management in multiple optics and equipped with IP 66 protection with impact and corrosion resistant complete all as specified and directed.

shiva construction (BID ID -3118085)

AARSINFRATECH (BID ID -3129475)

M/S JINDAL ENTERPRISES (BID ID -3118879)

Hitesh Construction (BID ID -3129887)

Radha Enterprises (BID ID -3118066)

GAR CONSTRUCTIONS (BID ID -3118980)

Ex Serviceman Enterprises (BID ID -3118321)

R V CONSTRUCTION (BID ID -3119524)

M/s S Amarjit Singh (BID ID -3109555)