Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance NO 4 ARANMANAI RAMASAMY KOTHANAR WEST STREET RAMANATHAPURAM | RAMANATHAPURAM | TAMIL NADU | 623115 | Admitted-Finance |
| 2 | Admitted-Finance 97 1 YADHAVA STREET VELIPATTINAM RAMANATHAPURAM 523504 | 523504 | Admitted-Finance |
Tender Value
₹13.5 L
EMD Value
₹13,500
Closing Date
21 Aug 2024, 3:00 pmClosed
COMMISSIONER RAMANATHAPURAM MUNICIPALITY
Annal Gandhi adigal salai Ramanathapuram
Ramanathapuram Municipality Construction of toilet block at Municipal Girls higher secondary school campus
2024_MAWS_472001_1
2003/2024/E1-1
Open Tender
Civil Works - Buildings
Works
180 days
MUNICIPAL OFFICE RAMANATHAPURAM
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹13,500
22 Aug 2024
10 Aug 2024
21 Aug 2024
10 Aug 2024
21 Aug 2024
10 Aug 2024
Amount
Earth Work Excavation for Foundation in all soils and sub soils and to full deth as may be directed except in hard rock requiring blasting inclusive of shoring , shuttering bailing out water wherever neccessary refilling the foundation with excavated earth other than sandy soil in layers of not more than 150mm thick layers well rammed and depositing the surplus earth l within thecompound in place as shown by the departmental officers with initial lead and lift ,clearing and levelling the site etccomplete
Foundation
Plinth beam
Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.
Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.
PCC in 1:4:8[1cement and 4 sand 8 course aggregate] using with 40mm H.B.G. Jelly including dewatering if found necessary and laid in layersof not more than 15cm thick and compacted etc finishing curing ,cost of materials, conveyance and all other labour charges etc., complete complying with standard specification
Centering for soffits of RCC slabs of plane surfaces like lintels beams etc including strutting 3.00m high using mild steel sheets of size 90cmx 60cmand BG 10 stiffened with MS angles of size 25mmx25mmx3mm laid over silver oak [cw] joist of size 10cmx6.5cm[spaced at about 90cm c/c]and supported by casurina props of 10cm to13cm dia[spacedof 75cmc/c of all RCC works , excluding cost of materials and all other labour charges etc., complete complying with standard specification
For Column
Plinth beam
Beam,Slab
Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -
Foundation
Ground Floor
Supplying and fabricating and placing in position MS or RTS bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors and all other labour charges etc complete complying with standard specificationI
Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification
For Foundation & Basement
Ground Floor
Brick Partition Walls using II class ground moulded chamber bricks of size 9"X43/8"X 23/4" in C.M 1:3 (One part of Cement and Three part of Crushed Stone Sand (M- Sand)) using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification
Providing M.S grills , Grill doors, and steel doors works as per the design given including cost of steel and also in all floors and all other labour charges etc complete complying with standard specification.
Special ceiling Plastering in CM 1:3 [1cement and 3 sand] 10mm thick in all floors including well curing and all labour charges etc complete complying with standard specification [S.I.306]
Plastering in CM 1:5[1cement and5 sand] 12mm thick in all floors including well curing and all labour charges etc complete complying with standard specification [S.I.306]
Finishing the top roof with 1 course of machine Preesed tiles of 20mm thick[average] of approved quality cm 1;3 12mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar including well curing and all other labour charges etc complete complying with standard specification
Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement
Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.
Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.
Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete
Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.
Internal Water Supply - P.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.
32mm dia PVC pipe
25mm dia PVC pipe
Supplying and fixing in position P.V.C. specials such as plain bend, door bend, plain tee, door tee, offsets,Y-junction, plain or with door of various sizes best quality confirming to I.S.S and providing leakproof joints including fixing to wall and giving connection to the P.V.C, soil stacks, dismadling the brick masonry or R.C.C. floor or Roof slab and redoing the dismandled portion to original condition etc., complete complying with standard specifications.
32mm dia PVC Bend
32mm dia PVC Tee
25mm dia PVC Bend
25mm dia PVC Tee
110mm dia PVC Bend
110mm dia PVC Tee
Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications.
110mm dia PVC pipe
Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.
Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications
Suppling and fixing in position 15mm.diameter brass / C.P screw down tap / pillar tap / swan neck tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary
CP screw down tap
20mm dia PVC Screw doen tap
Supply and fixing of PVC. Nahini / Floor Trap with stainless Steel Gratings - 100 mm x 75 mm including all charges etc, complete as per standard specification.
Supply and delivery and fixing of 1000 litre capacity HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,
Supplying and fixing of 6 way SP DB of 16 A/way with 16Amps DPIC Switch with metel clad of of 500 V with fuse and neutral ( Side handle) on Suitable TW Box PWD Earthing. (SD 149)
Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light (6 Points Per Coil) (For Rooms like Bath , Toilet,& Pump room etc..) SD 23
Light point
Wiring with 2x1.5 sq.mm (22/0.30)PVC insulated SC unsheathed Cu. Conductor of 1100V grade in Suitable PVC Rigid Pipe Consealed in Wall and ceiling with PVC accessories in flush with wall with 150nnx100mmx113mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 pin non inter locking CS Plug with continious earth wire connection of 14 SWG TC wire and making good of the consealed portion with suitable colour for concealed PVC Plug Point SD 36
Supply and fixing of single box type 4'18W LED Fitting on wall or ceiling with LED light fitting with PVC unsheathed Copper leads from terminals to the fitting.
Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V on 7/20 GI bearer wire for service connection mains
Supply, Delivery and installation of Napkin / Diaper Incinerator. Specification Burning Capacity - Not Less then 25 Pads Mode of Operation - Fully automatic Size - 250 x 250 x 620mm Heater - 2000 W Burning Time - 12 Mins Exhaut Pipe - 2" Flexible hose etc., Complete as per given specifications The rate including installation charges etc., COmplete
VENKATESWARA CONSTRUCITON (BID ID -1115923)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .