Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.9 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹25.6 L+₹3.2 L (14.4%)Rejected-Finance | L2 | Rejected-Finance HIGHER | |
| 3 | L3₹26.5 L+₹4.1 L (18.4%)Rejected-Finance | L3 | Rejected-Finance HIGHER | |
| 4 | L4₹27.5 L+₹5.1 L (22.9%)Rejected-Finance | L4 | Rejected-Finance HIGHER | |
| 5 | L5₹27.8 L+₹5.4 L (24.3%)Rejected-Finance | L5 | Rejected-Finance HIGHER |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
28 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Amritsar
GE Amritsar - 143001
CERTAIN REPAIR TO JCOs/ORs MARRIED ACCOMMODATION ABDHUL HAMID, PEERU SINGH ENCLAVE MAP PHASE II , BANA SINGH ENCLAVE AT AMRITSAR CANTT
2022_MES_548404_1
GE/ASR-50/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE Amritsar
Class D, Category a i
8 documents required · 8 mandatory
₹500
GE Amritsar
₹70,000
Yes
16 Dec 2022
29 Aug 2022
29 Sept 2022
29 Aug 2022
28 Sept 2022
14 Sept 2022
Amount
Material and Labour for rendering 15mm thick on fair faces of brick work or concrete surfaces on walls in cement mortar (1:6) , surfaces finished even and smooth without using extra cement, with & including taking down old cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc ; Complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for rendering 15mm thick on fair faces of brick work or concrete surfaces on walls in cement mortar (1:4) , surfaces finished even and smooth without using extra cement,with & including taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc ; Complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for rendering 5mm thick on fair faces of brick work or concrete surfaces on ceiling in cement mortar (1:3) finishing even and smooth without using extra cement, including taking down cement plaster of any description ; Complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint of shade as approved over a coat of cement primer on wall surfaces ; including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and as directed by the Engineer in Charge.
Material and Labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over coat of cement primer on walls ; including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and as directed by the Engineer in Charge.
Material and Labour for Preparation of newly plastered surfaces of ceiling & applying three coats of white lime wash ; including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and as directed by the Engineer in Charge.
Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. ; Complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius,as in boundry wall , drains & similar works built in cement mortar (1:6) ; Complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for brick work but except bricks (old dismantled serviceable bricks obtained from demolition shall be reused after necessary cleaning of mortar) built in cement mortar (1:6) ; Complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in built in cement mortar (1:4) ; Complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for rendering 15mm thick on fair faces of new brick work or concrete surfaces on walls in built in cement mortar (1:6) , surfaces finished even and smooth without using extra cement ; Complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for rendering 15mm thick on fair faces of new brick work or concrete surfaces on walls in built in cement mortar (1:4) , surfaces finished even and smooth without using extra cement ; Complete all as specified and as directed by the Engineer-in-Charge.
Demolition reinforced roofs, floors (other than ground floors), beams, slab, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition). ; Complete all as specified and as directed by Engineer-in-Charge.
Material & Labour for reinforced Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls , chajjas, fascia,shelves, cover slab and the like ; Complete all as specified and as directed by Engineer-in-Charge.
Use and waste of formwork to soffits of slab supported on walls, Chullah hoods, chajjas, weather shades, corbels, water troughs and similar items including edges rough finished surfaces of concrete; Complete all as specified and as directed by Engineer-in-Charge.
Supply & Fixing mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips ; Complete all as specified and as directed by Engineer-in-Charge.
Supply and Fixing in repairs of Bib tap of PTMT, 15mm bore, of any colour (minimum weight -105gms) with crutch or butter fly handle, fancy type , long body , any colour screwed down, screwed for iron pipe or for brass ferrule ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs of Stop Valve of PTMT, 15mm bore, of any colour (minimum weight - 90gms) , high pressure , screwed down, screwed for iron pipe or for brass ferrule ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs of Stop Valve of PTMT, 15mm bore, of any colour (minimum weight - 110gms) ,with long shank and cup (concealed type) high pressure , screwed down, screwed for iron pipe or for brass ferrule ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for shower rose of PTMT with swivel joints, any colour with & including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of PTMT as in repairs ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for Pillar Tap of PTMT 15mm bore, of any colour (minimum weight - 110gms) , high pressure , screwed for iron pipe and fixed ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size fixed in wall as directed & making good disturbed surfaces to match with the existing as in repairs ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for 10 Ltrs capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with all internal accessories and fixed to wall and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for vitreous china squatting pan 'Orissa' pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe)including connection to trap, and to flushing pipe, anti-syphonage pipe etccomplete including making good to floors with PCC bedding (1:5:10) type E2 using 40mm nominal brick ballast and connection to trap with cement mortar all as specified, and making good to floor including demilition of PCC / Lime concrete bedding existing pan ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) front or back inlet including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc and making good to floor ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for plastic water closet seat , white , closed patern with flat bottom and cover and mild steel chromium plated or aluminium hinging device ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for stainless steel kitchen sink with draining board made of 1mm thick sheet for kitchen with plug washers wate pipe cast iron canti lever bracket including bedding in cement mortar to dwarf wall including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for PVC waste pipe 32mm to 40mm dia , 600mm to 750mm long fixed to WHB/Urinals ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for stainless steel kitchen plate rack size 1000mm x 1000mm x 300mm deep made out of 1mm thick sheet with folded edges and glossy finish with & including fitting arrangement ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for PVC connection 15mm size with PTMT nuts of length 450mm; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for 40mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 including dismantaling of old tile and cement mortar bedding ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 10mm thick screed bed in CM 1:4 , & including dismantaling of old tile and cement mortar bedding ; Complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with cement @ 3.0 Kg/Sqm ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface including dismantaling of old tile and cement mortar ; Complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for Vitrified ceramic light shade tiles 8-10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including screed bed or bedding layer of cement mortar (1:6) 15mm thick for laying floor finishes, including dismantaling of old tile and cement mortar bedding ; Complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for Vitrified ceramic light shade tiles 8-10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including screed bed or bedding layer of cement mortar (1:4) 10mm thick for laying floor finishes, including dismantaling of old tile and cement mortar bedding ; Complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for Granite (of any type) work ( table rubbed and polished) 18-20mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 including demolition of old stone slabs; Complete all as specified and as directed by the Engineer-in-Charge.
Material and Labour for Machine cut Kota stone slab flooring 20-25 mm thick ( size not less than 0.5 sqm each) over cement screed base of 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with & including cutting, rubbing and mirror polishing to the entire kota stone slab flooring with rubbing machine using suitable size of cutting stones to the entire satisfaction of the AGE, including demolition of old stone slabs , complete all as specified and directed by the Engineer-in-Charge.
Material and Labour for 80mm thick Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-40 grade with grey cement and no pigments over and including 25mm thick consolidated sand filling under floors ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including taking up or down existing steel water tubing alongwith connections fixed/laid in any situation ; Complete all as specified and as directed by the Engineer-in-Charge.
Taking up or down existing steel water tubing 15mm bore alongwith connections fixed/laid in any situation and Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors including taking up or down existing steel water tubing alongwith connections fixed/laid in any situation ; Complete all as specified and as directed by the Engineer-in-Charge.
Taking up or down existing steel water tubing 20mm bore alongwith connections fixed/laid in any situation and Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for rotational moulded polythene, triple layers, ISI Marked water storage tank 500 Litres capacity, closed top, cylindrical, hoisted and fixed in position with & including 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for rotational moulded polythene, triple layers, ISI Marked water storage tank 1000 Litres capacity, closed top, cylindrical, hoisted and fixed in position with & including 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight - 2 1 0 g m s ) ; Complete all as specified and as directed by the Engineer-in-Charge.
Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) not exceeding 1.50 sqm ; Complete all as specified and as directed by the Engineer-in-Charge.
Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) exceeding 1.50 sqm but not exceeding 4.00 sqm ; Complete all as specified and as directed by the Engineer-in-Charge.
Taking down shutter of any description exc 1 sqm and not exc. 2 sqm each ; Complete all as specified and as directed by the Engineer-in-Charge.
Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each and refixing in the same opening ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for Framed work confirming to FE- 290 (Gde-E- 165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for 1.00 mm thick back sheet in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required ; Complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for factory made PVC Internal door frame of size 100 mm x 45 mm with a wall thickness of 5 mm (+0.25) , made out of extruded 5 mm (+0.25) thick PVC sheet manufactured by asn ISO - 9001-2008 certified company, and by joining 3 Nos heat bent PVC sheet sections. The inside section of size 90 x 30mm shall be made from plain colour PVC sheet of 5 mm (+0.25) thickness. The inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from 5 mm (+0.25) thick plain PVC sheet. The frame shall be mitre cut at two corners and oined with 4 Nos of 150 mm long brackets of 15 mm x 15 mm square tube . The two vertical door frames are to be reinforced with 40mm x 20mm MS tube of 19 guage through out the frame . The door frame whslla be fixed to the wall using 8/100 mm long MS Screws through thee frame by using anchor fasteners. A minimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc as per manufacturer's specification ; Complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for or Providing 30mm thick " FACTORY MADE DOOR SHUTTER - WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottom & lock rail. M.S frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement / eynoacrylate adhesive with 5mm (+0.25) thick moulded PVC sheet of Density 600 Kg/Cbm Manufactured by an ISO-9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel, 5mm (+0.25) plain/prelam PVC sheet to be pasted using solvent cement / cynoacrylate adensive on other side of the Hollow PVC section. All the four edge of the panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet baton (Made by sticking 02 Nos. foam PVC sheets of 5mm (+0.25) thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain / prelam mouded PVC sheet of door. 20mm thick (5mm x 4 Nos) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos. stainless steel but hinges of size 100mm *25mm*2mm and 50mm longsteel screws drilled suitable to pass through both the walls of M.S tube. other hardwares should be fixed with 25mm*8mm size steel screws etc, as per manufacturer's specification ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for 35 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, ; Complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for Box type steel window, ERW hollow P-Section size 60 mm x 25 mm, double rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one No openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars, glass , wire cloth etc as given below all as shown on drg No CEJZ/TD-1020/08 SH 1/3 to 3/3 dated 01 may 2008 ; Complete all as specified and as directed by the Engineer-in-Charge as follows:- (a) Hold fast 150mm long of MS flat 12mm x 3mm - 4 Nos per Window (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf (c) MS tower bolt 150mm long - 02 Nos per leaf (d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf (e) Cleat 55mm long of hollow square 15mm, 0.63mm thick- 01 Nos per leaf (f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf (g) MS guard bar 10mm square bars @ 10cm c/c fixed horizontly (h) 3mm thick clear glass sheet 3 Nos per leaf glazing with oil putty (i) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in each leaf (j) Hold fast block in PCC 1:2:4 type B0 (four No’s for Each window) & around required plaster in cement mortar 1:4 and match with existing finishes .
Material and labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast, glass , wire cloth etc all as shown on drg No CEJZ/TD-1019/08 dt 01.05.08 incuding cutting holes complete all as specified and directed as follows :- (i) 3mm thick Pin headed glass sheet with oil putty (ii) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in each leaf (iii) Hold fast block in PCC 1:2:4 type B0 (four No’s for Each vent) & around required plaster in cement mortar 1:4 and match with existing finishes .
Supply and Fixing factory made 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for Factory made, 35mm thick, 2nd class hard wood (Hollock), plain framed, paneled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-8 ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for Framed work confirming to FE- 290 (Gde-E- 165) as in grills, guard bars etc., complete, drilled for fixing and to be prepared for fixing with fittings and hanging; also fastening and fixing ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads in squares n.exc 0.50 Sqm ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for 3mm thick, figured glass pin headed type ordinary quality and glazing, with oil putty or with wooden beads in squares n.exc 0.50 Sqm ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads in squares n.exc 0.50 Sqm , including hacking out old broken glass any thickness, size, quality or description from wooden frames or metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for 150 mm aluminum , anodised, barrel tower bolts of extruded section; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for butt hinges 100mm size medium weight cold rolled mild steel, fixed with screws or welded to steel frame ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for 150mm aluminum , anodised, Handle of extruded section; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for 250mm aluminum alloy, anodised , sliding door bolt with hasp and staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing for mild steel 300mm ordinary rat tail rod pattern spring including roller and roller plate complete including necessary welding to door frame ; Complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over primed steel surfaces ; Complete all as specified and as directed by the Engineer-in-Charge.
Material and labour for preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply & Fixing for factory made cup board shutter (Godrej type) made of angle iron 35mm X 35mm X 6mm frame covered with 1mm thick MS sheet, welded to frame including suitable number of handles, lugs and locking arrangement , and one shop coat of red oxide primer at manufacturer workshop ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs for solid PVC sheet 5mm thick, in backside of kitchen cabinets for support ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs for solid PVC board 18mm thick, in cupboard shelves and backside (for hanging) kitchen cabinet etc ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs for solid PVC shutter 18mm thick with one side prelam of any shade plain colour as in cup board, kitchen cabinet shutter etc ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs for 40mm long box type steel hinges spring action type ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs for 75-80mm long stainless steel handle ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for providing PCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregate ) for fixing of hold fast ; Complete all as specified and as directed by Engineer-in-charge.
Demolition of cement concrete in ground floors and pavings (unreinforced) n.exc 15 cm thickness (below or above ground level) ; Complete all as specified and as directed by Engineer-in-charge.
Material and labour for precoated chequered cement concrete tile of size 200mm x 200mm x 22mm thick over and including 15mm thick cement screed in CM 1:6 set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of tiles ; Complete all as specified and as directed by Engineer-in-charge.
Material and labour 50 mm thick plain cement concrete 1 : 3 : 6 type C1 (using 20mm graded crushed stone aggregate) as in plinth protection , paths and similar works laid in pannels including necessary form work, surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge .
Supply and fixing in repairs for 25mm dia MS pipe PVC sheathed, decorative fancy type, curtain rod including brackets & a set of ABS finials ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs for 110 mm bore PVC (SWR ) pipes single socketed, in any lenth with rubber ring fixed to wall , including dismantling old unserviceable 100/75mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of floor/trenches ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing for PVC (SWR) bend 110 mm size ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing for 110 mm bore PVC (SWR) single Tee ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement ; Complete all as specified and as directed by Engineer-in-charge.
Dismantling brick tiles or terracing tile, single/double layer on roof including mud phuska any thickness and leepng plaster, seggregating, cleaning and stacking servicable tiles for reuse ; Complete all as specified and as directed by Engineer-in-charge.
Demoliton of mud in roof any thickness including mud plastering and removing to distance exc 250m but n exc 500m ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for brick tiles but except brick tiles (Old serviceable tiles shall be reused)laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for PCC (1:3:6) type C-0 (using 12.5mm graded stone aggregate) averaging 50 mm thick as in roof padding mixed with and including lequid WPC @ 100ml per 50Kg of cement , surfaces finished even and smooth without using extra cement ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for 15mm thick plaster in cement mortar (1:3) on RCC roof surfaces as in vertical surfaces , mixed with and including lequid WPC @ 100ml per 50Kg of cement , surfaces finished even and smooth without using extra cement ; Complete all as specified and as directed by Engineer-in-charge.
Material & Labour for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (Weight not less than 150 gms /sqm ) laid over and including evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning & prepration of surfaces before laying bitumen coat & APP etc ; Complete all as specified and as directed by Engineer-in-charge.
Demolition of cement Concrete in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sides of sunken slab benching etc including necessary form work ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for rendering 15mm thick cement plaster as in sunken portion in cement mortar 1:3 using water proofing compound, finished fair and even without using extra cement ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing for 40mm bore steel water tubing grade galvanised inserted at the end of lateral slope projecting atleast 25cm beyond the outermost part of the building below the drain pipe up to two storey construction as spout for sunken, and all joints should be sealed properly by epoxy sealent ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for Water proofing treatment to sunken floor including wall comprising with the following course of treatment/ specification from bottom to top. (a) Applying bituminous primer @ 0.40 ltrs per sqm over plastered surface of floor for treating the sunken floor all as specified & as directed by Engr-in-Charge. (b) Apply a coat of hot bitumen 85/25 penetration grade bitumen @ 1.20 kgs/Sqm. (c) One layer of 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire area, ; Complete all as specified and as directed by Engineer-in-charge. Note:-(i) After plastering testing tobe carried out by ponding (For 48 Hrs) and any leakage/Seepage observed shall be rectified before water proofing treatment. (ii) Laying of APP membrane shall be done as per manufracturers instructions . (iii) Joints tobe touched hot and Minimum width of overlaps not less than 150mm.
Material and Labour for Plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in sunken filling as mass concrete or in sub base of floors ; Complete all as specified and as directed by Engineer-in-charge.
Raking out joints/pointing to brick work or brick tiles, 30cmX15 cm laid flat, in floor , surface channels, roofs etc ; Complete all as specified and as directed by Engineer-in-charge.
Material and labour for flush pointing to brick 30cmX15 cm laid flat, brick on edges or brick tiles in paving in cement mortar 1:3 ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repair for Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for prime the surface with tarfelt LM or equivalent make of approved by GE mixed with portable water in the ratio 1:1 and apply @400gm per sqm(As per surface condition) Apply first coat of tarfelt LM or equivalent make of approved by GE having elongation 200% confirming to ASTMC-412 & having crack binding of 8 mm confirming to astm-836 with tensile strength after 7 days 0.5 mm confirming to ASTM C-412with no diluation of water on primed surface while the surface is still tacky with consumption @700 gm per sqm. Lay Geotex of 45 GSM/Fiber mesh simultaneously and paste iot properly with overlap of 500 mm Allow the first coat of dry for 10 to 12 hrs. Apply second coat on cured first coat with consumption @ 700Gm per sqm in opposite direction of first coat by Brush of roller. Allow it to dry for 10-12 hrs after apply third coat with consumption @ 700Gm per sqm Ensure final curung time of 36 hrs before allowing /Carrying out any further work conduct ponding test after min 7 day applying two coats of U V resistans Elastomeric Exterior Acrylic weather resistance water proof coating of Shalicryl-215 of equivalent make of approved by GE having alongation of 300%after curing of 14 daysconfirming to ASTM D-6083 for U V Protection of Bituminous Elastomeric Acrylic Emulsified liquid membrane of Tarfelt LM or equivalent make of approved by GE to give long life and prevent its deteriorration. Note:- Work will be paid after recieving of Manufacturer Garranty certificate.
Supply and Fixing in repairs for 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs for 15 mm Bib taps, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm bore and fixed in repair, including extra CP nipple wherever required ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs for 15mm dia Stop valves, , high pressure, with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for unions,including extra CP nipple wherever required ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs for 15mm bore stop valve fancy type chromium plated with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions including extra CP nipple wherever required ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs for Brass chromium plated Wall mixer with bend pipe in repairs suitable for mixing Hot & Cold water with lettered hot or cold and making leakage free connection with GI pipes screwed for iron pipe 15mm dia ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for centre hole mixer cast copper alloy chromium plated with capston head (Pillar Mounted) srewed down high pressure with lettered hot or cold with long screwed shanks fly nut screwed for iron pipe 15mm dia ; Complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for brass chromium plated shower rose 125 mm size with swivel joint including fixing to 15mm dia steel pipe or union including extra CP nipple wherever required ; Complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs forhealth faucet suitable 15mm dia fixed to GI tubing with CP lead ; Complete all as specified and as directed by Engineer-in-charge.
Material and Labour for PCC ( 1:4:8) type D-2 using 40mm graded stone aggregate as mass concrete , sub-base & similar works surfaces fair finished ; Complete all as specified and as directed by Engineer-in-charge.
ESS KAY BUILDER
M/s. M Company
amardeep traders
BISHAN DASS
GEE EMM ASSOCIATES
m/s inder construction co
m/s. gopal krishan
M/S RASHPAL CONSTRUCTION CO
Santokh Singh and Associates
MAAN ENTERPRISES
B.J.CONSTRUCTION CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .