Balance part of Block D,E,F,J,K,3B and 4B for 2BHK Type flats at Additional Transit Accommodation at Vessu, Qazigund, Kulgam

Amount

Providing and laying of hand packed stone soling (size 150mm-230mm) before laying of mud mat compacted consolidated rammed filling the voids compacting all complete carriage upto site of work all head loads complete job.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).

P/L of Reinforced Cement Concrete of Nominal mix M20 1:1.5:3 mix in foundation up to floor 5level.

Supplying, filling with river sand /nallah muck in 20 cm layers including watering, compacting and dressing under flooring in ground floor.

Centring and shuttering including strutting, proping etc. And removal of form for:

Suspended floors, roofs, landings, balconies and access platform (slabs)

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete:Thermo-Mechanically- Treated bars.

Brick Work with common burnt clay F.P.S. ( non-modular) bricks of class designation 75 in foundqation/Plinth and superstructure in Cement Mortar 1: 6. mix.

Cement concrete flooring 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate) finished by a floatiing coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. Complete: 50mm thick with 20mm nominal size stone aggregate. Crushed aggregate.

Providing and laying 40mm thick levelling course under flooring to cover the conduits (1:2:4) mix crushed aggregate

Providing and fixing glass strips in joints of cement concrete floor. 40mm wide and 4mm thick.

Providing and laying of vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% & conforming to IS:15622 of approved make in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 60 X 60 cm (Kajaria/Somany).

Providing and fixing of kota stone flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) 18 mm thick.

Providing and fixing of granite 18mm thick gang saw cut polished above kitchen top floor or vertical surfaces as per requirement with moulding & granite polish including supply of all materials and labour etc. as per approved by engineer in charge.

Providing and fixing of kota stone slab over 18-20mm skirting /dedo(average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) 18 mm thick.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with waterproofing cement compound consisting of applying : a) First layer ofslurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixedwith water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for48 hours. The rate includes preparation of surface, treatment andsealing of all joints, corners, junctions of pipes and masonry withpolymer mixed slurry.

15 mm thick cement plaster in 1:6 cement mortar in walls using coarse sand.

6mm thick plaster on cielings and soffits of stairs upto any level of mix (1:3).

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

POP cornice in cielings 75mm wide with required thickness in specified areas as per specified pattern.

Internal Wall Painting with emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Finishing external walls with Wall putty of Standard Brand in two coats to make surfaces even including a coat of cement water primer including apex spectrum or equivalent finish including scaffolding costs and removal of same after the completion of job.

Finishing of external facade with specified pattern of dajjidewari of deodar wooden planks 12mm thick 100 mm wide fixed with wall by way of drilling of screws / nails and finishing of the wooden planks by way of sand papering machine griding , priming with two or more coats including a coat of fevicol and wood filler where necessary including painting two or more coats of wood paint of approved shade and a coat of black japan on the inner side , complete job.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, two or more coats.

Providing and fixing of ist class ceramic glazed tiles conforming to IS:13753 of minimum thickness 5mm of approved make like KAJARIA/SOMANY/RAKS or equivalent make in all color, shades except begundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3 (1 Cement : 3 coarse sand) and joining with grey cement slurry @3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing of ceramic glazed floor tiles 300 X 300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:13755 of KAJARIA/SOMANY/ RAKS or equivalent make in color such as white, ivory, grey, fume red, brown laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc. complete.

Providing and fixing of 40 mm thick 300 mm wide eaves boarding of best quality kailwood,withmoulded edge . as per specifications.

Providing and fixing of 19mm thick T&G ceilling soffits including cost of wooden frame work (imported wood).

Providing and Fixing of Colour coated normal corrugations CGI 0.6mm thick class-3 sheets fixed to the supporting structure with 8mm dia GI J/L hooks , GI limpet and bituminous felt washers, including plain ridges, valleys etc, all included, but excluding cost of supporting structure.

Supplying and erecting welded steel work in built up sections in trusses/trussed purlins /beams/rafters up to desired span and height confirming to specified code including cost of priming coats.

Providing & fixing of 16mm dia holding down Anchor Bolts 500 mm long alongwith nuts for holding of steel truss.

Supply and fixing of 38 mm thick frame of Silver/Mirinda wood (Seasoned) paneled shutter with paneling of teak wood 18mm. thick termite proof phenol bonded board with decorative teak veneering on both faces of suitable pattern including beadings lippingsetc fixing of wooden cleats, door stoppers and adjustment of anodized aluminum hinges, bolts, locks, handle, springs, etc. complete with all the fittings as per drawing and specifications. ( Rates to include cost of cleats, stoppers, hinges, lockable handle sets of standard make, springs as per requirement but including cost towards aluminum sliding / tower bolts and aluminum handle as per drawings specified.

Supply and fixing of 38 mm thick frame of Silver/Mirinda (Seasoned) wood paneled shutter with wire guaze standard guage hard drawn steel wire fabric of wire dia 0.63 mm and aperture size 1.4 mm as mosquito jail” for doors including beadings lippingsetc fixing of wooden cleats, door stoppers and adjustment of anodized aluminum hinges, bolts, locks, handle, springs, etc. complete with all the fittings as per drawing and specifications. ( Rates to include cost of cleats, stoppers, hinges, lockable handle sets of Standard make, springs as per requirement including cost towards aluminum sliding / tower bolts and aluminum handle as per drawings specified.

Providing and fixing wadrobe shutters all shelves of laminated 19mm thick ply wood and all hardware like channels etc as per drawings and specifications.(Face Area) as per the directions of Engineer I/C.

Providing and fixingmodular kitchen cabinets 19mm water proof ply wood thick board above and below counter along with all hardware like channels etc as per drawings and specifications.(Face Area). Including liminated as directed by Engineer I/C

P/F OF 5mm sheetglass including cost of kail wood beadind fixed the cost of fittings and fixtures approved specifications.

Providing and fixing of 35mm thick glazed shutter for window of first class Silver/Saal/Mirinda wood (Seasoned) including cost of hinges.hardware fittings towerbolts handles staysglazing for the same all complete job as specified in the drawings.

Providing and fixing of 35mm thick wire guage shutter for window of first class Silver/Saal/Mirinda wood (Seasoned) including cost of hinges.hardware fittings towerbolts handles stays glazing for the same all complete job as specified in the drawings.

Providing & fixing of MS grill of required pattern & design vertical and horizontals as per design, excluding cost of rail pipe, fixtures fittings. Priming coat and two or more coats of painting including the cost of screws / bolts complete job.fixed to opening by welding.

Providing and fixing of M.S. Pipe rail with all screws fittings painiting polishing all complete job 50mm dia pipe.

Providing & fixing of MS grill of required pattern & design vertical and horizontals as per design, including the cost pipe rail, fixtures fittings. Priming coat and two or more coats of painting including the cost of screws / bolts complete job.fixed to the openining/window frame.

Providing Plinth protection 50mm thick of M-10 nominal mix (max agg. size 20mm) concrete including smooth finishing the top surface.Providing under layer for plinth protection including preparation of ground 75mm thick (uncompacted) layer of dry stones aggregates (40mm nominal size) well rammed and grouted with sand.

Providing & fixing water closet squatting pan (Indian Type W.C pan) with 100mm P or S trap, 10 litre low level P.V.C flushing cistern including flush pipe manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: Orissa pattern white vitereous china W.C. Pan of size 580 X 440 mm with integral type foot rests.

Providing & fixing Ivory White Vitreous China pedestal type water closet (European type W.C. Pan) with seat and lid, 10 litre low level white P.V.C flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required : W.C. Pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I/M.S brackets, standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: Ivory White Vitreous China Wash Basin size 630x450.

Providing fixing of Vitreous china Pedestal of standard pattern for wash basins completely recessed at the back for the reception of pipes and fittings.

Providing & fixing Salem Stainless Steel A ISI 304(18/8) Kitchen Sink as per IS:13983 with C.I. Brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 610 X 510 mm bowl depth 200 mm.

Providing & fixing PVC Flexible waste Pipe, of 40mm dia. for sink or wash basin coupling etc. complete.

Providing & fixing Stainltss steel jali( gratimg with or without hole for waste pipe for entrap werght not less than 70gms complete.

Providing & fixing Mirror of size 600 mm x 400 mm of superior size with bevelled edge with 6mm thick hard board back fixed to wall with wooden cleats and C.P. brass screws & washers complete.

Providing and fixing 600 X 120 X 5 mm glass shelf with edges round of supported on anodised alumunium angle frame with C.P. Brass fittings guard rail complete fixed with 40 mm long screw, rawl plug, etc. Complete.

Providing & fixing C.P. brass Toilet paper holder of complete.

Providing & fixing C.P. Brass Towel rail with C.P. Brass brackets fixed to wooden cleats with C.P. brass screws.

Providing & fixing PVC Water or Vent pipe 110 mm internal diameter with cowl. And necessary bends , junctions, inclusive of rubber washers , adhesives , complete job.

Providing & fixing of health faucet lever type to control the discharge Including all fixtures complete job

Providing & fixing of gysers of standard 50lts make like Havells or Racold including all fixtures and fittings

Providing & fixing of gysers of standard 25lts make like Havells or Racold including all fixtures and fittings

Providing & fixing of C.P elipsoidal towel holder including the cost of screws complete job

Providing and fixing soap cases of C.P. Brass of standard quality

Providing and fixing G.I. Pipes complete with G.I fittings and clamps, including cutting and making good the walls etc.: 15 mm dia. Nominal bore (Medium).

Providing and fixing G.I. Pipes complete with G.I fittings and clamps, including cutting and making good the walls etc.: 25 mm dia. Nominal bore (Medium).

Providing and fixing G.I. Pipes complete with G.I fittings and clamps, including cutting and making good the walls etc.: 32mm dia. Nominal bore (Medium).

Providing and fixing gun metal Gate Valve with C.I. wheel of approved quality (screwed end): 32mm nominal bore

Providing and fixing ball valve (brass of approved quality complete: 20mm nominal bore

Providing and fixing15mm dia. Nominal bore UN-Plasticized P.V.C. connection pipe with brass union 45 cms Length.

Providing and fixing C.P. Brass Shower Rose with 15 or 20 mm inlet. 150mm diameter

Providing and fixing C.P brass bib cock conforming to IS:8931 15mm nominal bore

Providing and fixing brass stop cock 15 mm nominal bore.

Providing and fixing 15mm dia. Nominal bore C.P. Brass Angle Valve. Conforming to IS :8391.

Providing and fixing 15mm dia. Nominal bore C.P. Brass close whole Basin Mixer .

Providing and fixing 15mm dia. Nominal bore C.P. Brass wall Mixer of weighing not less than 197 gms. Confirming to IS: 8931.

Providing and fixing 15mm dia. Nominal bore C.P. Brass Mixer for Kitchen Sink with swinging spout complete .

Providing and placing on terrace 1000ltrs. Capacity high density polyethylene water storage tank of approved brand and manufacturer with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes and the base support for tanks and including heavy duty float ball valve of standard quality.

Supply and fixing 150x100mm size square mouth S.W. Gully Trap P type, with C.I. grating, brick masonry chamber, and water tight C.I. cover frame 300x300mm size inside The wt. of cover & frame to be not less than 7.2 kg.

Painting of exposed pipes with two or more coats of synthetic enamel paint of approved quality over a coat of red oxide zinc cromate primer including painting of legends in english with direction arrows.

15mm nominal bore

25mm nominal bore

32mm nominal bore

Providing and fixing thermal insulation tubing (for hot water pipes chases/buried locations), elastomeric flexible material having hermetic blister closed cell structure of expanded synthetic rubber over pipes of nominal bores and thickness including all required accessories complete as per specification. 15 mm/32 mm dia

Septic tank:-Earth work excavation in FOUNDATION TRENCHES ,incl. dewatering of foundation trenchs excavation of work.

Providing and laying of hand packed stone soling (size 150mm-230mm) before laying of mud mat compacted consolidated rammed filling the voids compacting all complete carriage upto site of work all head loads complete job.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Brick Masonry in 1:6 cement mortar (1 cement: 6 coarse sand) FPS bricks up to desired height in all floor as per architectural design and drawings.

Providing and laying of 50mm thick concrete flooring in rooms in M-15 (1:2:4) nominal mix(max.size of aggregate 20mm) concrete finished with floating coat of neat cement.

Providing Centering and shuttering ,propping and removal of formwork .

P/L of Reinforced Cement Concrete of Nominal mix M20 1:1.5:3 mix in foundation up to plinth level.

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete:Thermo-Mechanically- Treated bars.

12 mm thick cement plaster in 1:6cement mortar in walls using coarse sand.

Providing & fixing PVC pipe heavy duty, Water or Vent pipe 150 mm internal diameter with cowl. And necessary bends , junctions, inclusive of rubber washers , adhesives , complete job.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Sokaoge Pits:- Earth work excavation in FOUNDATION TRENCHES ,incl. dewatering of foundation trenchs excavation of work.

Providing and Laying of Random rubble stone masonary using nallah stones with bond stones in foundation & plinth dry.

Providing Centering and shuttering ,propping and removal of formwork .

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete: Thermo-Mechanically- Treated bars.

P/L of Reinforced Cement Concrete of Nominal mix M20 1:1.5:3 mix in foundation up to plinth level.

MANZOOR AHMAD BHAT